Navigation : EXPO21XX > PROCESS INDUSTRY 21XX > H45: Energy > Warex Valve
  • Offer Profile
  • WAREX VALVE GmbH produces a range of valves and systems designed for demanding media and processes. The company specializes in butterfly valves, control valves, and shut-off devices, with a focus on safety, functionality, and individuality.

    • Production of fittings that match your operating requirements ideally
    • Creation of exact calculations and application-specific designs
Product Portfolio
  • Highlights

        • POWERING THE BATTERY PRODUCTION

        • For 60 years, we have stood for the highest quality and reliability.

          When it comes to products and systems for demanding media and processes, you are in the best hands with us. Our butterfly and control valves guarantee safety and reliability in full containment processes. As a system provider, we supply you with innovative solutions for safe process handling in the production of battery cells.

        • CHEMFLYER | CST PTFE LINED BUTTERFLY VALVES

        • The world’s leading modular PTFE-lined butterfly valve ChemFlyer | CST is manufactured in Switzerland to the highest quality standards for the safe handling of aggressive media.
      • BUTTERFLY VALVES

            • DKZ 103 Series

          • Series 103 is a tight-seal interposed flange Valve for flanges as per DIN EN 1092.The Valves are absolutely air-tight in line with DIN EN 12266 Leak Rate A. The housing is one-piece, and the sealing sleeve comes in two designs – replaceable or fix vulcanized. The ShutOff Valve is suitable for solid, liquid and gaseous media and the temperature range is from – 40 to + 200°C. This series is also available as a throttle Valve (metal seal closure) for hot gases with a temperature over 200°C.
                  • DKZ 103

                  • Butterfly Valve basic element with free shaft for mounting between flanges as per DIN or ANSI.

                    • Range of Nominal Widths: DN 50 – DN 1200
                    • Operating Temperature: – 40°C to + 200°C*
                    • Sleeve: replaceable or fix vulcanized
                  • DKZ 103 R

                  • Butterfly Valve with ratched hand lever.

                    • Range of Nominal Widths: DN 50 – DN 600
                    • Operating Temperature: – 40°C to + 200°C*
                    • Sleeve: replaceable or fix vulcanized
                  • DKZ 103 H

                  • Butterfly Valve with worm gear.

                    • Range of Nominal Widths: DN 50 – DN 1200
                    • Operating Temperature: – 40°C to + 200°C*
                    • Sleeve: replaceable or fix vulcanized
                  • DKZ 103 DZ

                  • Butterfly Valve with pneumatic actuator, solenoid valve and a box in Makrolon/Vestamid for limit switches.

                    • Range of Nominal Widths: DN 50 – DN 1200
                    • Operating Temperature: – 40°C to + 200°C*
                    • Sleeve: replaceable or fix vulcanized
                  • DKZ 103 DZ-P

                  • Butterfly Valve with pneumatic actuator and positioner.

                    • Range of Nominal Widths: DN 50 – DN 1200
                    • Operating Temperature: – 40°C to + 200°C*
                    • Sleeve: replaceable or fix vulcanized
                  • DKZ 103 E

                  • Butterfly Valve with electric actuator.

                    • Range of Nominal Widths: DN 50 – DN 1200
                    • Operating Temperature: – 40°C to + 200°C*
                    • Sleeve: replaceable or fix vulcanized
                • DKZ 105 Series

                      • DKZ 105 SK

                      • Container Butterfly Valve type DKZ 105 SK, star shaped, with ratched hand lever.

                        • Range of Nominal Widths: DN 150 – DN 300
                        • Operating Temperature: – 40°C to + 200°C*
                        • Sleeve: replaceable
                      • DKZ 105 VK

                      • Container Butterfly Valve type DKZ 105 VK, in full flange execution, with ratched hand lever.

                        • Range of Nominal Widths: DN 150 – DN 300
                        • Operating Temperature: – 40°C to + 200°C*
                        • Sleeve: replaceable
                    • DKZ 110 Series

                          • DKZ 110

                          • Butterfly Valve basic element with free shaft for mounting between flanges as per DIN or ANSI.

                            • Range of Nominal Widths: DN 50 – DN 600
                            • Operating Temperature: – 40°C to + 200°C*
                            • Sleeve: replaceable or fix vulcanized
                          • DKZ 110 R

                          • Butterfly Valve with ratched hand lever.

                            • Range of Nominal Widths: DN 50 – DN 600
                            • Operating Temperature: – 40°C to + 200°C*
                            • Sleeve: replaceable or fix vulcanized
                          • DKZ 110 H

                          • Butterfly Valve with worm gear.

                            • Range of Nominal Widths: DN 50 – DN 600
                            • Operating Temperature: – 40°C to + 200°C*
                            • Sleeve: replaceable or fix vulcanized
                          • DKZ 110 DZ

                          • Butterfly Valve with pneumatic actuator, solenoid valve and a box in Makrolon/Vestamid for limit switches.

                            • Range of Nominal Widths: DN 50 – DN 600
                            • Operating Temperature: – 40°C to + 200°C*
                            • Sleeve: replaceable or fix vulcanized
                          • DKZ 110 DZ-P

                          • Butterfly Valve with pneumatic actuator and positioner.

                            • Range of Nominal Widths: DN 50 – DN 600
                            • Operating Temperature: – 40°C to + 200°C*
                            • Sleeve: replaceable or fix vulcanized
                          • DKZ 110 E

                          • Butterfly Valve with electric actuator.

                            • Range of Nominal Widths: DN 50 – DN 600
                            • Operating Temperature: – 40°C to + 200°C*
                            • Sleeve: replaceable or fix vulcanized
                        • DKZ APS®

                              • DKZ 103 APS® DZ

                              • Butterfly Valve with pneumatically charged sealing here with pneumatic actuator.

                                • Range of Nominal Widths: DN 50 – DN 1200
                                • Operating Temperature: – 40°C to + 200°C*
                                • Sleeve: replaceable or fix vulcanized
                              • DKZ 110 APS® DZ

                              • Butterfly Valve with pneumatically charged sealing here with pneumatic actuator.

                                • Range of Nominal Widths: DN 50 – DN 1200
                                • Operating Temperature: – 40°C to + 200°C*
                                • Sleeve: replaceable or fix vulcanized
                              • DKZ 110 APS® DZ-P

                              • Butterfly Valve with pneumatically charged sealing here with pneumatic actuator. Positioner and fluid disk are particularly suitable for dosing.

                                • Range of Nominal Widths: DN 50 – DN 1200
                                • Operating Temperature: – 40°C to + 200°C*
                                • Sleeve: replaceable or fix vulcanized
                            • DKZE APS®

                                  • DKZE 103 APS® DZ

                                  • Eccentric Butterfly Valve with pneumatically charged, replaceable profiled sealing ring, placed on a easily demountable carrier ring.

                                    • Range of Nominal Widths: DN 150 – DN 600
                                    • Operating Temperature: – 40°C to + 200°C*
                                    • Sleeve: replaceable
                                  • DKZE 110 APS® DZ

                                  • Eccentric Butterfly Valve with pneumatically charged, replaceable profiled sealing ring, placed on a easily demountable carrier ring.

                                    • Range of Nominal Widths: DN 150 – DN 600
                                    • Operating Temperature: – 40°C to + 200°C*
                                    • Sleeve: replaceable
                                • DKD

                                      • DKD 103

                                      • Butterfly Valve, metallic seated, full flange design – for use in the control range up to 280°C.

                                        • Range of Nominal Widths: DN 50 – DN 1200
                                        • Operating Temperature: – 40°C to + 280°C*
                                        • Sealing ring Steel / Special Steel
                                        • Leakage: from about 0,5 % to 2 % – surface equivalent
                                      • DKD 110

                                      • Absperrklappe, Butterfly Valve, metallic seated, wafer design – shut off and control valve up to 280°C.

                                        • Range of Nominal Widths: DN 50 – DN 1200
                                        • Operating Temperature: – 40°C to + 280°C*
                                        • Sealing ring Steel / Special Steel
                                        • Leakage: from about 0,5 % to 2 % – surface equivalent
                                      • DKD/DKH

                                      • Butterfly Valve, metallic seated, wafer design – shut off and control valve for the high temperature range.

                                        • Range of Nominal Widths: DN 50 – DN 1200
                                        • Operating Temperature: – 40°C to + 280°C*
                                        • Sealing ring Steel / Special Steel
                                        • Leakage: from about 0,5 % to 2 % – surface equivalent
                                      • DKD-AK

                                      • Butterfly Valve, metallic seated, wafer design – shut off and control valve for the high temperature range.

                                        • Range of Nominal Widths: DN 50 – DN 1200
                                        • Operating Temperature: – 40°C to + 280°C*
                                        • Sealing ring Steel / Special Steel
                                        • Leakage: from about 0,5 % to 2 % – surface equivalent
                                      • DKD-KL

                                      • Butterfly Valve, metallic seated, Clamp ring connection – shut off and control valve for air or bulk goods.

                                        • Range of Nominal Widths: DN 50 – DN 1200
                                        • Operating Temperature: – 40°C to + 280°C*
                                        • Sealing ring Steel / Special Steel
                                        • Leakage: from about 0,5 % to 2 % – surface equivalent
                                    • BALL VALVES

                                  • Warex Ball Valves are characterized by the use of fewer components and space-saving elements, by a sensible modular conception and by easy operation. The free cylindrical passage reduces flow resistance to a minimum and the bearings on both sides of the ball ensure a constant low switching moment over the entire range of pressure.
                                          • DBV 400

                                          • WAREX-Ball-Valve with flange connection specially for powder and bulk handling one side sealed, with free outlet.

                                            • Range of Nominal Widths: DN 50 – DN 150
                                            • Operating Temperature: – 30°C to + 180°C *
                                            • sealing: PTFE / O-Ring or stainless steel O-Ring *
                                          • DBV 140 F

                                          • Compact Ball Valve with flange connection, full bore up to DN 100, from DN 125 with reduced bore, standard in anti static design.

                                            • Range of Nominal Widths: DN 15 – DN 200
                                            • Operating Temperature: – 10°C to + 200°C *
                                            • sealing: PTFE / FPM-O-Rings
                                            • body: WCB or stainless steel 1.4408
                                            • ball: stainless steel 1.4401
                                          • DBV 521 T/B

                                          • Ball Valve 3-piece design, PN 63 with threaded or welded connection.

                                            • Range of Nominal Widths: DN 10 – DN 100
                                            • Operating Temperature: – 10°C to + 200°C *
                                            • sealing: PTFE / FPM-O-Rings
                                            • body: WCB or stainless steel 1.4408
                                            • ball: stainless steel 1.4401
                                        • DOUBLE FLAP SYSTEM

                                      • A differentiation within Double Flap Systems can be made between tact and pressure locks. The Tact Sluices are used normally within lower pressure differences as an inlet or outlet system. They consist of a combination of two Shut-Off Valves with a surge drum. A ventilation system is installed additionally with the pressure and vacuum locks so as to allow a completely pressureless opening or closing of the Valves. Application areas are here e.g. the output from vacuum dryers. The result in combination with the APS Valves (air-pressure-sealing) is a very high vacuum tightness.
                                              • DTS

                                              • For discharging and dosing of bulk materials from silos, storage bins, sifters, filters, cyclones, etc.

                                                • Range of Nominal Widths: DN 50 – DN 600
                                                • Chamber volume: 0,5 ltr. – 300 ltr.
                                                • Connection: PN 6 – PN 16 ANSI 150 lbs.
                                                • Lock operations: max. 10 / min., depends on nominal width
                                                • Dosing weighers, bagging lines, etc.
                                                • Systems with high security requirements for a dust explosion decoupling – see chapter Protection System
                                                • Systems where highly abrasive media is discharged or dosed, in which a gas-tight shut-off is required
                                            • PINCH VALVES

                                              • The Pinch Valves are pressure controlled Shut-Off Valves. Neutral gases or liquids can be used as control medium. Pinch Valves can also be used as a regulating or dosing Valve if the tax pressure is changed, e.g. via a proportional pressure control Valve. Due to an extensive choice of elastomer for the special sleeve and different materials for the Valve body and flanges, the Pinch Valve finds application in many areas. Pressure and friction losses are insignificant due to the free passageway. By means of pressurization the sleeve closes the flow densely. Sleeves are closing densely within liquid, gaseous and also within viscous fluent or powdery fluids.
                                                  • DQV-F

                                                  • Pinch Valve with pneumatic sealing and flange connection.

                                                    • Range of Nominal Widths: DN 40 – DN 150
                                                    • Operating Temperature: – 10°C bis + 120°C*
                                                  • DQV-M

                                                  • Pinch Valve with pneumatic sealing and threaded connection.

                                                    • Range of Nominal Widths: DN 20 – DN 40
                                                    • Operating Temperature: – 10°C bis + 120°C*
                                                • SWING CHECK VALVES

                                              • Swing Check Valves are Valves for return flow prevention in piping systems. Easy structures and short dimensions are the remarkable features of Swing Check Valves. They are constructed to be mounted directly between flanges acc. to DIN. Swing Check Valves of type DRK-DRKF are suitable for industrial employment in piping systems for transport of liquid and gaseous fluids of group 1 (explosive, inflammable, toxic, incendiary) and group 2 (all other) according to Pressure Equipment Directive 2014/68/EU. They are not suitable for media with solid components. The Swing Check Valves are automatically held in a central position by the flange connection screws. An O-ring seals the equipment and protects it from external effects. Therefore, we recommend using flanges with clean sealing surfaces. Swing Check Valves require a low opening pressure. The resulting opening power directs the Valve against a spring and the Valve’s weight power, so that the media is released. If the initial pressure is higher than the entrance pressure, the Valve closes and is sealed by the O-ring to protect it from the media.
                                                        • DRK

                                                        • Swing Check Valve for pipings to be fitted between flanges according to DIN 2501.

                                                          • Range of Nominal Widths: DN 32 – DN 600
                                                          • Operating Temperature: – 40°C bis + 300°C*
                                                    • ROTARY

                                                  • Basis of the Rotary Valves are the over many years proved Shut-Off Valves of the centric APS class. They can be used for charging and blocking. The APS construction indicates that the sealing element is pressed pneumatically to the perimeter of the disk in position “closed”! A steady pressure tightness is still guaranteed with slight wears by the constant contact pressure of the sealing element of the Flap Valve. Therefore it shows a special suitability for abrasive bulk material. The Shut-Off Valve can be employed depending on the used sealing material in a temperature range of – 40°C up to + 200°C. For the triggering of the pneumatic seal Warex offers different solutions in which the seal can, if necessary, deflated with vacuum support or be charged with nitrogen.
                                                          • ROTARY VALVE DKZ 103 APS®

                                                          • Special Valve for fine dosing to prevent formation of bridges with continuous support and gas-tight shut-off of bulk and granules.

                                                            • Range of Nominal Widths: DN 100 – DN 400
                                                            • Operating Temperature: – 40°C to + 200°C*
                                                            • Sleeve: replaceable or fix vulcanized
                                                          • ROTARY VALVE DKZ 110 APS®

                                                          • Special Valve for fine dosing to prevent formation of bridges with continuous support and gas-tight shut-off of bulk and granules.

                                                            • Range of Nominal Widths: DN 100 – DN 400
                                                            • Operating Temperature: – 40°C to + 200°C*
                                                            • Sleeve: replaceable or fix vulcanized
                                                        • APS®

                                                      • The APS® construction indicates that the sealing element is pressed pneumatically to the perimeter of the disk in flap position “closed”! Steady pressure tightness is still guaranteed with slight wears by the constant contact pressure of the sealing element of the flap valve. Therefore it shows a special suitability for abrasive bulk material. The shut-off Valve can be employed depending on the used sealing material in a temperature range of – 40°C up to + 200°C. For the triggering of the pneumatic seal Warex offers different solutions in which the seal can, if necessary, escape freely with vacuum support or be charged with nitrogen.
                                                              • DKZ 103 APS® DZ

                                                              • Butterfly Valve with pneumatically charged sealing here with pneumatic actuator.

                                                                • Range of Nominal Widths: DN 50 – DN 1200
                                                                • Operating Temperature: – 40°C to + 200°C*
                                                                • Sleeve: replaceable or fix vulcanized
                                                              • DKZ 110 APS® DZ

                                                              • Butterfly Valve with pneumatically charged sealing here with pneumatic actuator.

                                                                • Range of Nominal Widths: DN 50 – DN 450
                                                                • Operating Temperature: – 40°C to + 200°C*
                                                                • Sleeve: replaceable
                                                              • DKZ 110 APS® DZ-P

                                                              • Butterfly Valve with pneumatically charged sealing here with pneumatic actuator. Positioner and fluid disk are particularly suitable for dosing.

                                                                • Range of Nominal Widths: DN 50 – DN 450
                                                                • Operating Temperature: – 40°C to + 200°C*
                                                                • Sleeve: replaceable
                                                            • DKZE 103 APS®

                                                          • The class DKZE 103 APS® concerns Shut-Off Valves in a simple eccentric type. APS type indicates (Air-Pressure-Sealing) that the sealing element is pressed pneumatically to the perimeter of the disk in Valve position “closed”. Within light wears a steady pressure tightness is still guaranteed through the constant contact pressure of the sealing element to the flap Valve. Therefore it shows a special suitability for abrasive bulk materials. The Shut-Off Valves can be used in a temperature area from – 40°C up to + 200°C depending on the used sealing material. For the control of the pneumatic seal Warex offers different solutions in which the seal can be vented if applicable with vacuum support or be charged with nitrogen.
                                                                  • DKZE 103 APS® DZ

                                                                  • Eccentric Butterfly Valve with pneumatically charged, replaceable profiled sealing ring, placed on a easily demountable carrier ring.

                                                                    • Range of Nominal Widths: DN 150 – DN 600
                                                                    • Operating Temperature: – 40°C to + 200°C*
                                                                    • Sleeve: replaceable
                                                                  • DKZE 110 APS® DZ

                                                                  • Eccentric Butterfly Valve with pneumatically charged, replaceable profiled sealing ring, placed on a easily demountable carrier ring.

                                                                    • Range of Nominal Widths: DN 150 – DN 600
                                                                    • Operating Temperature: – 40°C to + 200°C*
                                                                    • Sleeve: replaceable
                                                                • INDUSTRIES


                                                                  • Whether in the chemistry, the food or the pharmaceutical industry, the process plant as well as container construction WAREX Valves have also proved themselves with rougher operating conditions and problematic application cases since a lot of years very well.

                                                                    They are used for liquids, gases, and abrasive bulk materials as well as for solids in plants with the risk of dust explosions.

                                                                      • BULK MATERIALS

                                                                      • Every batch has its own individual characteristics with regard to grain size, distribution, density, roughness, moisture and temperature. It is the task of Warex Valve to respond to this. In addition to the standard products, we are, of course, also able to provide the APS butterfly valves with customised designs perfectly tailored to your requirements.
                                                                      • CHEMICAL INDUSTRY

                                                                      • Efficiency, flexibility and the protection of resources: this is the key to remaining competitive. Warex Valve is your powerful partner here!
                                                                      • FOOD INDUSTRY

                                                                      • One of the largest industries in Germany. Warex Valve is able to meet the constantly growing demands in food technology and process engineering.
                                                                      • PHARMACEUTICAL INDUSTRY

                                                                      • The production of pharmaceuticals is subject to the strictest of regulations and special conditions. Here as well, Warex Valve ensures that everything runs smoothly thanks to its technical expertise.
                                                                      • PLANT CONSTRUCTION

                                                                      • We strive to satisfy the ever-growing requirements of a variety of industries. At the same time, we are able to develop tailor-made concepts for every plant, and respond to the technical requirements with specialised expertise.