Videos
Loading the player ...
  • Offer Profile
  • We provide functional and economical mass finishing technology. It is our aim to fulfill your specific demands with economical processes, solid machines and a few tools. Here we focus on easy-to-use and functional technology that enables consistent processing results and perfect surfaces. We are pleased to advise you on technical and processing questions and demonstrate our expertise in mass finishing by putting your sample pieces to the test. More than 20 years of experience in surface finishing technology do us credit. Contact us - we will find the right solution!
Product Portfolio
  • Disc Finishing Machines

      • Workpieces and abrasives are loosely placed in an open-topped working container and placed in a toroidal flow through the tray formed as a disc. The centrifugal force accelerates the workpieces together with the grinding wheels to the standing streamlined inner wall of the working container. Due to their different density, the workpiece and the abrasive body perform a relative movement. This dynamic flow allows high, targeted material removal with very short processing times compared to vibrators or drums.
          • Centrifugal Disc Finishing Machine TE 6 HD

          • for wet processing (benchtop machine)

            with 1 working container (6 l volume)
            • thermally highly cross linking polyurethane working container, inner diameter 230 mm
            • concave working container for a high grinding pressure
            • centrifugal disc with curved carrier peg for an efficient stream
            • precise gap system for thin parts and fine media with a precise distance of 0.1 to 0.3 mm
            • exact and robust bearing, low-maintenance
            • dosing pump for process fluid
            • robust chassis made of welded stainless steel
            • motor 0.25 kVA
            • color working container: blue
            • color casing: light grey

            Dimensions:
            • Width: 520 mm
            • Depth: 450 mm
            • Height: 702 mm
            • Weight: approx. 35 kg
          • Centrifugal Disc Finishing Machine TE 10 HD

          • for wet processing (benchtop machine)

            with 1 working container (10 l volume)
            • thermally highly cross linking polyurethane working container, inner diameter 265 mm
            • concave working container for a high grinding pressure
            • centrifugal disc with carrier peg for an efficient stream
            • precise gap system for thin parts and fine media with a precise distance of 0.1 to 0.3 mm
            • exact and robust bearing, low-maintenance
            • dosing pump for process fluid
            • robust chassis made of welded stainless steel
            • motor 0.6 kVA
            • color working container: blue
            • color casing: light grey

            Dimensions:
            • Width: 550 mm
            • Depth: 600 mm
            • Height: 720 mm
            • Weight: approx. 60 kg
          • Centrifugal disc finishing machine TE 18 N

          • for wet processing

            with 1 working container (18 l volume)
            • thermally highly cross linking polyurethane working container, inner diameter 320 mm
            • concave working container for a high grinding pressure
            • centrifugal disc with carrier peg for an efficient stream
            • precise gap system for thin parts and fine media with a precise distance of 0.1 to 0.3 mm
            • exact and robust bearing, low-maintenance
            • dosing pump with level monitoring for process fluid
            • connection for external process fluid supply via
            • solenoid valve with hand lever valve(pressure max. 100kPa)
            • robust chassis made of welded stainless steel
            • manual separating unit with
            • screen box for changeable sieves,
            • collection tray, plastic,
            • 2 changeable sieves (size per definition)
            • motor 0.6 kVA with motor protection
            • color working container: blue
            • color casing: light grey

            Dimensions:
            • Width: 500 mm
            • Depth: 950 mm
            • Height: 1800 mm
            • Weight: approx. 120 kg
          • Centrifugal disc finishing machine TE 30 N

          • for wet processing

            with 1 working container (30 l volume)

            - thermally highly cross linking polyurethane working container, inner diameter 400 mm
            - concave working container for a high grinding pressure
            - centrifugal disc with carrier peg for an efficient stream
            - precise ring gap system for thin parts and fine media with a precise distance of 0.1 to 0.3 mm
            - exact and robust bearing, low-maintenance
            - dosing pump with level monitoring for process fluid
            - connection for external process fluid supply via
              solenoid valve with hand lever valve (inlet pressure max. 100kPa)
            - robust chassis made of welded stainless steel
            - manual separating unit with
              screen box for changeable sieves
              collection tray, plastic
              2 changeable sieves (size per definition)

            - motor 2.2 kVA  with motor protection
            - color working container: blue
            - color control cabinet: light grey

            Dimensions:

            - Width:       500 mm
            - Depth:       1150 mm
            - Height:      1800 mm
            - Weight:     approx. 170 kg

          • Centrifugal disc finishing machine TE 60 N

          • for wet processing (benchtop machine)

            with 1 working container (60 l volume)
            • thermally highly cross linking polyurethane working container, inner diameter 525 mm
            • concave working container for a high grinding pressure
            • centrifugal disc with carrier peg for an efficient stream
            • precise gap system for thin parts and fine media with an adjustable distance to 0.1 - 0.3 mm
            • exact and robust bearing, low-maintenance
            • dosing pump with level monitoring for process fluid
            • connection for circulation via solenoid valve with hand lever valve
            • large swivel angle for optimum emptying of the working container
            • robust chassis made of welded stainless steel
            • motor for disc 4 kVA with motor protection
            • motor for emptying 0.25 kVA
            • color working container: blue
            • color casing: light grey

            Dimensions:
            • Width: 1390 mm
            • Depth: 1200 mm
            • Height: 1750 mm
            • Weight: approx. 430 kg
          • Centrifugal disc finishing machine TE 60 N R

          • with integrated separation unit and media return

            for wet processing (benchtop machine)

            consisting of:
            • 1 working container (60 l volume)
            • thermally highly cross linking polyurethane working container, inner diameter 525 mm
            • concave working container for a high grinding pressure
            • centrifugal disc with carrier peg for an efficient stream
            • precise gap system for thin parts and fine media with an adjustable distance to 0.15 - 0.3 mm
            • exact and robust bearing, low-maintenance
            • gentle emptying of the working container by stepwise tilting
            • large swivel angle for optimum emptying of the working container
            • rinsing of working container while rotating the disc into emptying position
            • Connection for external supply of the process fluid (e.g. centrifuge) with pressure regulator, pressure gauge for the adjustment of the inflow water pressure
            • 2 Solenoid and metering valves for process fluid and rinsing container
            • Metering unit with sight glass 0-100 liter/h to adjust the incoming process fluid

            Dimensions
            • Width: appr. 2.300 mm
            • Depth: appr. 1.650 mm
            • Height: appr. 1.400 mm (1.950 mm at top point when loading)
            • Weight: appr. 1.200 kg
        • Trough Vibrators

          • In the vibratory process, the workpieces and the abrasive are loosely placed in an open-topped working container (trough) and offset by imbalances in short oscillations, which forces the mixture in a screw or ringing toroidal (long or round trough). Due to their different density workpiece and grinding body perform a relative movement, which allows a material removal. Vibrators are universal vibratory finishing machines and can be used for a variety of workpieces and machining targets that cause problems in drum and centrifugal grinding. They are particularly suitable for the low-cost high-gloss polishing of highly sensitive workpieces, thi smeans from rough pre-sanding to the production of electroplated surfaces.
              • Trough Vibrator TV 60

              • with 1 working container (60 l nominal volume)

                • wear-resistant, highly thermally crosslinked polyurethane lining, 10-15mm
                • concave side bolster to prevent adhesion of work pieces
                • side discharge opening with robust closure
                • process water drain at container ground with a fine screen
                • process water inlet with quick coupling
                • unbalanced motor with robust bearing, low maintenance
                • trough as a solid welded steel construction
                • Time process control including dosing pump control
                • frame for process control and pump
                • Machine base/substructure
                • Dosing pump
                • level control

                Dimensions:
                • Width: 1000 mm
                • Depth: 780 mm
                • Height: 1260 mm
                • Weight: approx. 280 kg
              • Trough Vibrator TV 30

              • with 1 working container (30l volume)

                • wear-resistant, highly thermally crosslinked polyurethane lining, 10-15mm
                • concave side bolster to prevent adhesion of work pieces
                • discharge opening on the side with robust closure
                • process water drain at container ground with a fine screen
                • process water inlet with qick coupling
                • unbalanced motor with robust bearing, low maintenance
                • trough as a solid welded steel construction
                • Time process control including dosing pump control
                • frame for process control and pump
                • Machine base/substructure
                • Dosing pump
                • level control

                Dimensions Machine:
                • Width: 785 mm
                • Depth: 820 mm
                • Height: 1220 mm
                • Weight: approx. 240 kg
              • Trough vibrator TV 120

              • with 1 working container (120 l nominal volume)

                • wear-resistant, highly thermally crosslinked polyurethane lining, 10-15mm
                • concave side bolster to prevent adhesion of work pieces
                • side discharge opening with robust closure
                • process water drain at container ground with a fine screen
                • process water inlet with quick coupling
                • unbalanced motor with robust storage, maintenance
                • trough as a rugged welded steel construction
                • Time process control including dosing pump control
                • frame for process control and pump
                • Machine base
                • Dosing pump
                • level control

                Dimensions:
                • Width: 1500 mm
                • Depth: 610 mm
                • Height: 1100 mm
                • Weight: approx. 510 kg
            • Round Troughs

              • Workpieces and grinding media are put into motion in an open-topped trough. Due to imbalances the trough is set into short vibrations, which forces the mixture into spiral- and toroid-shaped motion. Finishing will be achieved by a relative movement of workpieces and grinding media caused by different specific gravity. Vibratory finishing systems are universal and can be used for a variety of workpieces and processing objectives that lead the drum and centrifugal disc systems to problems. Vibratory finishing systems are particularly suitable for the low-cost high-gloss polishing of sensitive workpieces. The applicability reaches from rough pre-grinding to an electroplating finish.
                  • Round trough vibrator W 10 HD

                    • made of thermally highly cross linking polyurethane, inner diameter 310 mm
                    • concave working container for streamlined revolution (torus)
                    • exchangeable working container with a quick coupling piece
                    • noise protection lid for working container, polyurethane, easy to install
                    • unbalanced motor with robust bearing and coupling plate, low-maintenance
                    • with plug for protection of the drain valve when using abrasive powder
                    • open and closed outlet sieve
                    • dosing pump for process fluid
                    • robust chassis made of welded stainless steel
                    • motor 0.15 kVA
                    • color working container: blue
                    • color electrical cabinet: grey

                    Dimensions:
                    • Width: 650 mm
                    • Depth: 600 mm
                    • Height: 550 mm
                    • Weight: approx. 40 kg
                  • Round trough vibrator W 15

                  • with 1 working container (15l volume)
                    • made of thermally highly cross linking polyurethane
                    • container cover made of stainless steel
                    • robust machine frame
                    • open and closed outlet sieve
                    • motor 0.5 kVA with motor protection
                    • color working container: blue
                    • color electrical cabinet: grey
                    • Control unit with speed and time control on base frame
                    • Dosing pump
                    • level control

                    Dimensions:
                    • Width: 490 mm
                    • Depth: 660 mm
                    • Height: 900 mm
                    • Weight: approx. 128 kg
                  • Round trough vibrator W 50

                  • with 1 working container (50 l nominal volume)
                    • made of thermally highly cross linking polyurethane
                    • container cover made of stainless steel
                    • robust machine frame
                    • open and closed outlet sieve
                    • motor 0.55 kVA with motor protection
                    • color working container: blue
                    • color electrical cabinet: grey
                    • Control unit with speed and time control on base frame
                    • Dosing pump
                    • level control

                    Dimensions:
                    • Width: 640 mm
                    • Depth: 825 mm
                    • Height: 1155 mm
                    • Weight: approx. 165kg container
                  • Round trough vibrator W 100

                  • with 1 working container (100l volume)
                    • made of thermally highly cross linking polyurethane
                    • container cover made of polyurethane with robust lock
                    • robust machine frame
                    • open and closed outlet sieve
                    • motor 0.7 kVA with motor protection
                    • Hand lever ball valve for closing of water drain
                    • Screwable plug for protection of ball valve during abrasive powder processing
                    • color working container: blue
                    • color electrical cabinet: grey
                    • Control unit with speed and time control on base frame
                    • Dosing pump
                    • level control

                    Dimensions:
                    • Width: 870 mm
                    • Depth: 920 mm
                    • Height: 1,260 mm
                    • Weight: approx. 260 kg
                • Accessories for our systems

                  • Mass finishing means not only delivering the equipment for the process itself, but also making handling easier. For example through our individual modifications, mobile units or standard accessories for the system types. The processing afterwards with the help of drying centrifuges for drying bulk parts or drying systems with granulate is a further component to complete the mass finishing effectively. Wastewater treatment plays a major role in wet processes. Here, too, we offer individual solutions or various standard products, such as waste water centrifuges or cascades. We will be happy to help you!
                      • Mobile units

                      • Whether long troughs as a compact unit with screening station and wastewater management or a trolley for small table systems. We make you mobile.
                      • Separation

                      • There are various separation options for our system types. From the manual unit to the fully integrated automated screening line.
                      • Drying

                      • Dry centrifuges with hot supply air or dry centrifugal disc finishing machines with granules.
                      • Cleaning technology

                      • Water treatment simply and cleanly with cleaning centrifuges in various designs or with a cascade solution for small quantities.
                      • Accessories TV

                      • Partition walls, noise protection lids or covers, distributors for the chamber systems, etc.
                      • Accessories TE

                      • Lids for wet and dry systems, scraper rings, splash protection for sieve units, container spray attachments, etc.
                      • Accessories drums tle

                      • Partition plates, separation solutions and individual adjustments for drums.
                      • Modifications

                        • Converting disc finishing systems from wet to dry or vice vers
                        • Automate the tilt function
                        • Retrofit process water treatment
                        • Etc.
                    • Consumables

                      • The choice of process medium in quality and form is the key to the optimum finish in the interaction of workpiece and machine. A large number of grinding and polishing media as well as granulates, compounds and additives are available for your process.
                          • Ceramic Media

                          • Ceramic grinding and polishing media are distinguished by hardness ratings of 7.3 - 8.5 Mohs and density ratings of 2.37 - 3.51 g/cm³. This results in high grinding performance with high grinding pressure. Light and shiny surface finishes are typical. Ceramic grinding and polishing media have a long service life and can maintain their original shape during operation.
                          • Plastic Media

                          • Synthetically bound grinding and polishing media have a lower density rating of 1.61 - 1.89 g/cm³ and, thanks to the selection of different grinding effects, they are the best choice for gentle and splinter-free processing by high demands on the surface quality of non-ferrous metals or soft surfaces.
                          • Granulate

                          • Nut shell granulate is used as a carrier medium for polishing and grinding pastes in dry polishing and grinding. A distinction is made between unimpregnated qualities and impregnated qualities appropriate to their utilization which have to be resharpened at regular intervals.

                            For the right polishing and grinding pressure, there is a whole range of grain sizes that can be used for your application.

                            There are also maize grits in different versions available
                          • Compound

                          • During the grinding process with water, compounds absorb the by-product of the grinding elements and the workpieces while helping to transport these away. Thanks to additives in the compound, this process is accompanied by cleaning, brightening and passivation of the workpiece.
                          • Additives

                          • With additives such as pastes and adhesive oils the proportion of polishing and grinding particles in dry polishing and grinding processes are metered ("resharpening") and binds grinding, dust and dirt particles ("regreasing").
                        • Our Services

                              • Development

                              • We can react quickly and flexibly to your needs and specifications and offer appropriate concepts for individual vibratory grinding systems or entire production lines and individual solutions.

                              • Sample processing

                              • In our laboratory we carry out sample processing free of charge for you. You will then receive a log in which the process parameters specifically tailored to your application, including the associated grinding and polishing agents, are listed. The key to your finish.

                              • Subcontracting

                              • We are happy to carry out small-scale subcontracting for you in our technical center. You can use larger quantities and batches Inquire at our partner company Strahlcenter Venetis GmbH or send us an email and we will forward your requirements.

                              • Maintenance

                              • For our vibratory finishing systems, we offer annual maintenance, maintenance contracts or maintenance as required. You will receive fast repairs and technical support by email or phone and by arrangement on site.

                              • Installation

                              • The commissioning of our standard machines is easy to carry out with the help of the operating instructions. On request, we will be happy to offer you assembly and commissioning.

                              • Training / workshops

                              • We offer customer-specific instruction and training in machine and process engineering both on-site and in-house. The course participants are instructed in theory and practice, including processes specifically related to machines and workpieces, in vibratory finishing technology.