Navigation : EXPO21XX > LASER & OPTICS 21XX > H35: Opto-Mechanical Equipment > Zaber Technologies
Videos
Loading the player ...
  • Offer Profile
  • Zaber's extensive line of computer controlled motorized linear slides, miniature linear actuators, motorized rotary stages, motorized mirror mounts, goniometers and other devices, make automating sub-micron positioning applications quick, easy, and affordable.

    Zaber's motorized linear slides, linear actuators and other products are easier to set up than competing devices. Multiple linear actuator or linear slide devices, as well as rotation stages, mirror mounts, and/or stepper motor controllers can be daisy-chained tao a single serial or USB port on any computer. No additional hardware or motor controllers are required.

    See how easy it is to install a Zaber linear actuator.

    This setup facilitates a low entry-level cost without sacrificing expandability. For example, you may purchase a single motorized linear slide to automate one axis of your application, then add additional linear actuators, linear slides, rotation stages, mirror mounts, stepper motors, etc to automate more axes as your time and budget permits.
Product Portfolio
  • Linear Actuators

      • Motorized with Built-in Controllers and Motor Encoders

            • X-NA-E Series

            • Micro linear actuators with built-in controllers and motor encoders

              25 and 50 mm travel
              Up to 30 mm/s speed and up to 25 N thrust
              Built-in controller; daisy-chains with other Zaber products
              Built-in, 250 CPR, motor encoder provides slip/stall detection and recovery
              Designed to replace standard micrometer heads on manual translation stages
              Hardened ball-tip (removable so you can use the built-in threaded tip or a flat tip)
        • Motorized Linear Actuators with Built-in Controllers

            • X-NA Series

            • Micro linear actuators with built-in controllers

              25 and 50 mm travel
              Up to 30 mm/s speed and up to 25 N thrust
              Built-in controller; daisy-chains with other Zaber products
              Designed to replace standard micrometer heads on manual translation stages
              Hardened ball-tip (removable so you can use the built-in threaded tip or a flat tip)
            • T-NA Series

            • Micro linear actuators with built-in controllers

              25 and 50 mm travel
              Up to 8 mm/s speed and up to 50 N thrust
              Our most compact, precise and robust actuators with built-in controllers
              Built-in controller; daisy-chains data and power with other T-Series products
              Designed to replace standard micrometer heads on manual translation stages
              Hardened ball-tip (removable so you can use the built-in threaded tip or a flat tip)
              Custom versions available
          • Motorized Linear Actuators

                • LAC Series

                • Compact motorized linear actuators
                  Compact size: great for applications with limited space
                  10 mm travel
                  Resolution down to 0.024 µm
                  Multiple tip options included
                  Designed for use with an X-MCB1 controller or any 2-phase stepper motor controller
            • Linear Stages

                • Motorized with Built-in Controllers and Linear Encoders

                    • X-LDQ-AE Series

                    • High speed, precision linear motor stages with built-in controllers

                      Minimum incremental move of 50 nm
                      Integrated linear encoder provides high accuracy closed loop servo positioning
                      Up to 1.5 m/s speed and up to 2 g acceleration
                      75, 150, 300, 450, 600 and 1000 mm travel
                      Up to 2.5 µm accuracy over 1000 mm travel
                      Built-in controller; daisy-chains with other Zaber products
                      Zero backlash
                      One digital input and two digital outputs
                      Technical Article - Linear Motors: Overview and Selection Process
                    • X-LDM-AE Series

                    • Ultra precision linear motor stages with built-in controllers

                      High repeatability (80 nm) and accuracy (1 µm), with 25 nm minimum incremental move
                      Direct position measurement from 1 nm resolution linear encoder
                      Up to 1.2 m/s speed and up to 3.5 g acceleration
                      60, 110, 210 mm travel options
                      Built-in controller; daisy-chains with other Zaber products
                      Non-contact ironless linear motor for ultra precision, high dynamics and zero backlash
                      One digital input and two digital outputs
                      Mounts directly in XY
                      Technical Article - Linear Motors: Overview and Selection Process
                    • X-LDA-AE Series

                    • Miniature linear motor stages with built-in controllers

                      High repeatability (200 nm) and accuracy (1 µm), with 20 nm minimum incremental move
                      Direct position measurement from 1 nm resolution linear encoder
                      Up to 0.8 m/s speed and up to 4 g acceleration
                      25, 75, 150 mm travel options
                      Built-in controller; daisy-chains with other Zaber products
                      Non-contact ironless linear motor for high precision, high dynamics & zero backlash
                      One digital input and two digital outputs
                      Mounts directly in XY
                      Technical Article - Linear Motors: Overview and Selection Process
                    • X-LRT-AEC Series

                    • High-load, high accuracy linear stages with built-in controllers, linear encoders, and dust covers

                      100, 250, 500, 750, 1000 mm travel
                      20 µm full travel accuracy
                      300 kg load capacity
                      Built-in controller; daisy-chains with other Zaber products
                      Integrated linear encoders with 50 nm resolution provide slip/stall detection and position correction
                      Ball screw and lead screw configurations
                      Includes stainless steel dust covers
                    • X-LRQ-DEC Series

                    • High precision stages with built-in controllers and linear encoders and dust covers

                      75, 150, 300, 450, 600 mm travel
                      Up to 13 µm accuracy over 600 mm travel
                      100 kg load capacity
                      Up to 205 mm/s speed and up to 300 N thrust
                      Built-in controller; daisy-chains with other Zaber products
                      Integrated linear encoders with 50 nm resolution provide slip/stall detection and position correction
                      Inline and parallel drive configurations
                      Ball screw and lead screw configurations
                      Includes stainless steel dust cover
                      Custom versions available
                    • X-LRQ-DE Series

                    • High precision stages with built-in controllers and linear encoders

                      75, 150, 300, 450, 600 mm travel
                      Up to 13 µm accuracy over 600 mm travel
                      100 kg load capacity
                      Up to 205 mm/s speed and up to 300 N thrust
                      Built-in controller; daisy-chains with other Zaber products
                      Integrated linear encoders with 50 nm resolution provide slip/stall detection and position correction
                      Inline and parallel drive configurations
                      Ball screw and lead screw configurations
                      Custom versions available
                    • X-LRM-DE Series

                    • Miniature, steel, motorized linear stages with built-in controllers and linear encoders
                      Hardened steel construction and recirculating ball bearing guide provide exceptional stiffness and thermal stability
                      100, 150, 200 mm travel
                      Integrated linear encoders with 50 nm resolution provide slip/stall detection and position correction
                      15 µm accuracy over 200 mm
                      50 kg load capacity
                      Built-in controller, daisy chains with other Zaber products
                    • X-DMQ-AE Series

                    • Zaber's X-DMQ-AE Series devices are computer-controlled, direct-drive voice coil driven, linear stages with high acceleration and precision capabilities in a compact size. They are stand-alone units requiring only a standard 24 V or 48 V power supply.

                      At only 30 mm high, these miniature stages are excellent for applications where a low profile is required. The X-DMQ-AE's innovative design allows speeds up to 1400 mm/s and loads up to 10 kg. Like all of Zaber's products, the X-DMQ-AE Series is designed to be 'plug and play' and very easy to set up and operate.
                  • Motorized with Built-in Controllers and Motor Encoders

                      • X-LRT-EC Series

                      • High-load, closed-loop stages with built-in stepper motors, motor encoders, controllers, and dust covers
                        100, 250, 500, 750, 1000, 1500 mm travel
                        500 kg load capacity
                        High cantilever stiffness
                        Up to 700 mm/s speed and up to 1200 N thrust
                        Built-in controller; daisy-chains with other Zaber products
                        Built-in, 400 CPR, motor encoder provides slip/stall detection and recovery
                        Ball screw and lead screw configurations
                        Includes stainless steel dust covers
                      • X-LRQ-EC Series

                      • Closed-loop stages with built-in stepper motors, motor encoders, controllers, and dust covers
                        75, 150, 300, 450, 600 mm travel
                        100 kg load capacity
                        Up to 840 mm/s speed and up to 300 N thrust
                        Built-in controller; daisy-chains with other Zaber products
                        Integrated, 500 CPR, motor mounted encoder provides slip/stall detection and recovery
                        Inline and parallel drive configurations
                        Ball screw and lead screw configurations
                        Includes stainless steel dust cover
                        Custom versions available
                      • X-LRQ-E Series

                      • Closed-loop stages with built-in stepper motors, motor encoders, and controllers

                        75, 150, 300, 450, 600 mm travel
                        100 kg load capacity
                        Up to 840 mm/s speed and up to 300 N thrust
                        Built-in controller; daisy-chains with other Zaber products
                        Integrated, 500 CPR, motor mounted encoder provides slip/stall detection and recovery
                        Inline and parallel drive configurations
                        Ball screw and lead screw configurations
                        Custom versions available
                      • X-LSQ-E Series

                      • Closed-loop stages with built-in stepper motors, motor encoders, and controllers

                        75, 150, 300, 450 and 600 mm travel
                        20 kg load capacity
                        Up to 1 m/s speed and up to 100 N thrust
                        Encoder position feedback with slip/stall detection and automatic recovery
                        Built-in controller; daisy-chains with any other Zaber products
                        Custom versions available
                      • X-BLQ-E Series

                      • Closed-loop, belt-driven linear stages with built-in stepper motors, motor encoders, and controllers

                        70, 145, 295, 445, 595, 1045, 1495, 2095, 3000 mm travel
                        Up to 2.0 m/s speed, 20 N thrust, and 20 kg load capacity
                        Encoder position feedback with slip/stall detection and automatic recovery
                        Built-in controller; daisy-chains with any other Zaber products
                      • X-LRM-E Series

                      • Miniature, steel, motorized linear stages with built-in controllers and motor encoders
                        Hardened steel construction and integrated recirculating ball bearing guide provide exceptional stiffness and thermal stability
                        25, 50, 100, 150, 200 mm travel
                        Motor encoder position feedback with slip/stall detection and automatic recovery
                        Up to 8 µm accuracy and 50 nm resolution
                        50 kg load capacity
                        Built-in controller, daisy-chains with other Zaber products
                      • X-LSM-E Series

                      • Miniature motorized linear stages with built-in motor encoder and controllers
                        25, 50, 100, 150, 200 mm travel
                        10 kg load capacity
                        Up to 104 mm/s speed and up to 55 N thrust
                        Built-in controller; daisy-chains with other Zaber products
                        Integrated, 200 CPR, motor mounted encoder provides slip/stall detection and recovery
                        Custom versions available
                      • X-LHM-E Series

                      • Motorized linear stages with built-in controllers and motor encoders

                        25, 50, 100, 150, 200 mm travel
                        3 kg load capacity
                        Up to 65 mm/s speed and up to 25 N thrust
                        Our most affordable linear stage with built-in controller and motor encoder
                        Daisy-chains with other Zaber products
                      • X-LSQ-EC Series

                      • speed motorized linear stages with built-in controllers, motor encoders, and covers

                        Built-in controller or motor-only models
                        75, 150, 300, 450, 600 mm travel
                        Motor encoder option for slip/stall detection and automatic recovery
                      • X-BLQ-EC Series

                      • Motorized Linear Stages with Built-in Controllers and Covers

                        Belt drive for long travel and high speed
                        70, 145, 295, 445, 595, 1045, 1495, 2095, 3000 mm travel
                        Dust cover options to keep out moderate debris
                      • LC40B-KM01 Series

                      • Belt-driven T-slot extrusion compatible linear guides with built-in controllers and motor encoders

                        Proprietary design combining a profile linear bearing with T-slot extrusion
                        Recirculating ball bearings for high load and lifetime
                        Configurable length up to 3500 mm in 50 mm increments
                    • Motorized with Built-in Controllers

                        • X-LRT-C Series

                        • High-load, motorized linear stages with built-in controllers and dust covers
                          100, 250, 500, 750, 1000, 1500 mm travel
                          500 kg load capacity
                          High cantilever stiffness
                          Up to 700 mm/s speed and up to 1200 N thrust
                          Built-in controller; daisy-chains with other Zaber products
                          Ball screw and lead screw configurations
                          Includes stainless steel dust covers
                        • X-LSQ Series

                        • Motorized linear stages with built-in controllers

                          75, 150, 300, 450 and 600 mm travel
                          20 kg load capacity
                          Up to 1 m/s speed and up to 100 N thrust
                          Built-in controller; daisy-chains with other Zaber products
                          Custom versions available
                        • X-LRM Series

                        • Miniature, steel, motorized linear stages with built-in controllers

                          Hardened steel construction and integrated recirculating ball bearing guide provide exceptional stiffness and thermal stability
                          25, 50, 100, 150, 200 mm travel options
                          Up to 8 µm accuracy and 50 nm resolution
                          50 kg load capacity
                          Built-in controller, daisy-chains with other Zaber products
                        • X-LSM Series

                        • Miniature motorized linear stages with built-in controllers
                          25, 50, 100, 150 and 200 mm travel
                          10 kg load capacity
                          Up to 104 mm/s speed and up to 55 N thrust
                          Built-in controller; daisy-chains with other Zaber products
                          Custom versions available
                        • X-LHM Series

                        • Motorized linear stages with built-in controllers
                          25, 50, 100, 150, 200 mm travel options
                          3 kg load capacity
                          Up to 65 mm/s speed and up to 25 N thrust
                          Our most affordable linear stage with built-in controller
                          Daisy-chains with other Zaber products
                        • X-LSQ-C Series

                        • High-speed motorized linear stages with built-in controllers and covers

                          75, 150, 300, 450 and 600 mm travel
                          50 kg load capacity
                          Up to 1 m/s speed and up to 100 N thrust
                          Includes rigid cover
                      • Motorized with Built-in Linear Encoders

                          • LRQ-DEC Series

                          • High precision linear stages with built-in linear encoders and dust covers

                            75, 150, 300, 450, 600 mm travel
                            Up to 13 µm accuracy over 600 mm travel
                            100 kg load capacity
                            Up to 205 mm/s speed and up to 300 N thrust
                            Integrated linear encoders with 50 nm resolution provide slip/stall detection and position correction
                            Inline and parallel drive configurations
                            Ball screw and lead screw configurations
                            Includes stainless steel dust cover
                            Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                            Custom versions available
                          • LRQ-DE Series

                          • High precision linear stages with built-in linear encoders
                            75, 150, 300, 450, 600 mm travel
                            Up to 13 µm accuracy over 600 mm travel
                            100 kg load capacity
                            Up to 205 mm/s speed and up to 300 N thrust
                            Integrated linear encoders with 50 nm resolution provide slip/stall detection and position correction
                            Inline and parallel drive configurations
                            Ball screw and lead screw configurations
                            Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                            Custom versions available
                        • Motorized with Built-in Motor Encoders

                            • LRT-EC Series

                            • High-load motorized linear stages with built-in motor encoders and dust covers

                              100, 250, 500, 750, 1000, 1500 mm travel
                              500 kg load capacity
                              High cantilever stiffness
                              Up to 360 mm/s speed and up to 1200 N thrust
                              Built-in, 400 CPR, motor encoder provides slip/stall detection and recovery
                              Ball screw and lead screw configurations
                              Includes stainless steel dust covers
                            • LRQ-EC Series

                            • Motorized linear stages with built-in motor encoders and dust covers
                            • LRQ-E Series

                            • Motorized linear stages with built-in motor encoders
                              75, 150, 300, 450, 600 mm travel
                              100 kg load capacity
                              Up to 840 mm/s speed and up to 300 N thrust
                              Encoder position feedback with slip/stall detection and automatic recovery
                              Inline and parallel drive configurations
                              Ball screw and lead screw configurations
                              Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                              Custom versions available
                            • LSQ-E Series

                            • High-speed motorized linear stages with built-in motor encoders
                              75, 150, 300, 450 and 600 mm travel
                              20 kg load capacity
                              Up to 1 m/s speed and up to 100 N thrust
                              Encoder position feedback with slip/stall detection and automatic recovery
                              Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                              Custom versions available
                            • LRM-E Series

                            • Miniature, steel motorized linear stages with built-in motor encoders
                              Hardened steel construction and integrated recirculating ball bearing guide provide exceptional stiffness and thermal stability
                              25, 50, 100, 150, 200 mm travel
                              Up to 8 µm accuracy and 50 nm resolution
                              Encoder position feedback with slip/stall detection and automatic recovery
                              50 kg load capacity
                              Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                            • LSM-E Series

                            • Miniature motorized linear stages with built-in motor encoders
                              25, 50, 100, 150 and 200 mm travel
                              10 kg load capacity
                              Encoder position feedback with slip/stall detection and automatic recovery
                              Multiple LSM-E stages can be assembled in XY or XYZ configurations without additional hardware
                              Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                              Custom versions available
                            • LHM-E Series

                            • Economy motorized linear stage with built-in motor encoders
                              3 kg load capacity
                              Up to 65 mm/s speed; 25 N peak thrust
                              50 N⋅cm cantilever load
                              Encoder position feedback with slip/stall detection and automatic recovery
                              Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                            • LSQ-EC Series

                            • High-speed motorized linear stages with built-in motor encoders and covers

                              75, 150, 300, 450 and 600 mm travel
                              Up to 1 m/s speed and up to 100 N thrust
                              50 kg load capacity
                              Includes rigid cover
                              Encoder position feedback with slip/stall detection and automatic recovery
                            • LC40B-KM02 Series

                            • Belt-driven T-slot extrusion compatible linear guides with built-in stepper motors and motor encoders

                              Up to 3500 mm travel length, available in 50 mm increments
                              Compatible with most 40 mm T-slot extrusion framing systems and accessories
                              Includes NEMA 23 stepper motor with built-in encoder
                              Recirculating ball bearing carriage for high load and lifetime
                          • Motorized

                              • LRT-C Series

                              • High-load motorized linear stages with dust covers
                                100, 250, 500, 750, 1000, 1500 mm travel
                                500 kg load capacity
                                High cantilever stiffness
                                Up to 360 mm/s speed and up to 1200 N thrust
                                Ball screw and lead screw configurations
                                Includes stainless steel dust covers
                              • LSQ Series

                              • Motorized linear stages
                                75, 150, 300, 450 and 600 mm travel
                                20 kg load capacity
                                Up to 1 m/s speed and up to 100 N thrust
                                Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                Custom versions available
                              • LRM Series

                              • Miniature, steel motorized linear stages
                                Hardened steel construction and integrated recirculating ball bearing guide provide exceptional stiffness and thermal stability
                                25, 50, 100, 150, 200 mm travel
                                Up to 8 µm accuracy and 50 nm resolution
                                50 kg load capacity
                                Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                              • LSM Series

                              • Miniature motorized linear stages
                                25, 50, 100, 150 and 200 mm travel
                                10 kg load capacity and up to 104 mm/s speed
                                Very low profile at only 21 mm stage height
                                Can be mounted in XY and XYZ configurations
                                Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                Custom versions available
                              • LHM Series

                              • Economy m3 kg load capacity
                                Up to 65 mm/s speed; 25 N peak thrust
                                50 N⋅cm cantilever load
                                Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                otorized linear stage
                              • LSA Series

                              • Micro motorized linear stages10 or 25 mm travel
                                Up to 10 mm/s speed and up to 3.5 kg thrust
                                Fits into the most restrictive spaces
                                Mounts directly in XY (requires AB106 angle bracket for Z axis/vertical mounting)
                                Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                            • Non-motorized

                                • TSB Series

                                • Translation stages
                                  25, 28, 50 and 60 mm travel
                                  10 kg load capacity
                                  Available with a micrometer head
                                  Stages without a manual micrometer require a X-NA, T-NA08, T-LA, or an NA11
                                • LC40 Series

                                • T-slot extrusion compatible linear guides

                                  Up to 3500 mm travel length, available in 50 mm increments
                                  Recirculating ball bearing carriage for high load and lifetime
                                  Optional integrated belt drive
                              • Vertical Stages

                                  • Motorized Vertical Stages with Built-in Controllers

                                      • X-LDM-AEZ

                                      • Ultra precision vertical stages with built-in controllers

                                        40 mm or 60 mm travel
                                        Passive, user adjustable magnetic counterbalance for payloads up to 55 N
                                        High repeatability (80 nm) and accuracy (1 µm), with 25 nm minimum incremental move
                                        Direct position measurement from 1 nm resolution linear encoder
                                      • X-LDA-AEZ

                                      • High precision vertical stages with built-in controllers

                                        20 mm or 25 mm travel
                                        Passive, user adjustable magnetic counterbalance for payloads up to 16 N
                                        High repeatability (200 nm) and accuracy (1.5 µm), with 20 nm minimum incremental move
                                        Direct position measurement from 1 nm resolution linear encoder Up to 0.7 m/s speed and up to 2.5 g acceleration
                                      • X-VSR-E

                                      • Vertical lift stages with built-in controllers and motor encoders

                                        20 mm travel
                                        Up to 48 mm/s speed and up to 200 N thrust
                                        10 kg load capacity
                                      • X-VSR Series

                                      • Vertical lift stages with built-in controllers

                                        20 mm or 40 mm travel
                                        Up to 48 mm/s speed and up to 200 N thrust
                                        10 kg load capacity
                                        55 or 85 mm retracted height
                                        Built-in controller; daisy-chains with other Zaber products
                                    • Motorized Vertical Stages

                                        • LDM-AEZ

                                        • Ultra precision vertical stages

                                          40 mm or 60 mm travel
                                          Passive, user adjustable magnetic counterbalance for payloads up to 55 N
                                          High repeatability (80 nm) and accuracy (1 µm), with 25 nm minimum incremental move
                                          Direct position measurement from 1 nm resolution linear encoder
                                          Up to 0.8 m/s speed and up to 1.6 g acceleration
                                        • LDA-AEZ

                                        • High precision vertical stages

                                          20 mm or 25 mm travel
                                          Passive, user adjustable magnetic counterbalance for payloads up to 16 N
                                          High repeatability (200 nm) and accuracy (1.5 µm), with 12 nm minimum incremental move
                                          Direct position measurement from 1 nm resolution linear encoder
                                          Up to 0.7 m/s speed and up to 2.5 g acceleration
                                        • VSR-E

                                        • Vertical lift stage with built-in motor encoders

                                          20 mm travel
                                          Up to 55 mm/s speed and up to 200 N thrust
                                          10 kg load capacity
                                          73 mm retracted height
                                        • VSR

                                        • Vertical lift stage

                                          20 mm or 40 mm travel
                                          20 mm or 40 mm of travel
                                          Up to 55 mm/s speed and up to 200 N thrust
                                          10 kg load capacity
                                      • Rotary Stages

                                          • Motorized with Built-in Controllers and Direct Reading Encoders

                                              • X-RST-DE Series

                                              • High precision motorized rotary stages with built-in controllers and direct encoders

                                                Speed up to 24 �/s and torque up to 10 Nµm
                                                Direct reading encoder for position correction; stage accuracy to 0.01�
                                                50 kg centered load capacity
                                                50.8 mm (2 inch) aperture with kinematic mounting options for repeatability of assembly
                                              • X-RST-AE Series

                                              • High precision motorized rotary stages with built-in controllers and direct encoders

                                                Speed up to 60�/s and torque up to 70 Nµm
                                                300 kg centered load capacity
                                                101.6 mm (4") aperture
                                                Direct reading encoder for position correction; stage accuracy to 0.008�
                                            • Motorized with Built-in Controllers and Motor Encoders

                                                • X-RST-E Series

                                                • High load motorized rotary stages with built-in controllers and motor encoders
                                                • X-RSB-E Series

                                                • High speed motorized rotary stages with built-in controllers and motor encoders
                                                  Continuous 360� rotation stage
                                                  Speeds up to 300 rpm
                                                  50.8 mm aperture
                                                  Built-in controller; daisy-chains with other Zaber products
                                                  Multiple motor configurations
                                                  Encoder position feedback with slip/stall detection and automatic recovery
                                                • X-RSW-E Series

                                                • Motorized rotary stages with built-in controllers and motor encoders
                                                  Worm gear driven for continuous rotation
                                                  Two lens holders allow for use as a polarizer mount
                                                  Speed up to 75 rpm and torque up to 2.25 N⋅m
                                                  Encoder position feedback with slip/stall detection and automatic recovery
                                                  Built-in controller; daisy-chains with other Zaber products
                                                  Multiple X-Series products in a daisy-chain can share a single power supply
                                                  Custom versions available
                                                • X-RSM-E Series

                                                • Motorized rotation stages with built-in controllers and motor encoders
                                                  21 mm total height
                                                  0.02� repeatability
                                                  4 mm aperture
                                                  50 N load capacity
                                                  Worm gear driven for continuous rotation
                                                  Built-in controller; daisy-chains with other Zaber products
                                                  Encoder position feedback with slip/stall detection and automatic recovery
                                              • Motorized with Built-in Controllers

                                                  • X-RST Series

                                                  • High load motorized rotary stages with built-in controllers
                                                    50.8 mm (2 inch) aperture with kinematic mounting options for repeatability of assembly
                                                    50 kg centered load capacity
                                                    Speed up to 24 �/s and torque up to 10 N⋅m
                                                    Built-in controller; daisy-chains with other Zaber products
                                                    Multiple X-Series products in a daisy-chain can share a single power supply
                                                    Custom versions available
                                                  • X-RSB Series

                                                  • High speed motorized rotary stages with built-in controllers
                                                    Continuous 360� rotation stage
                                                    Speeds up to 300 rpm
                                                    50.8 mm aperture
                                                    Built-in controller; daisy-chains with other Zaber products
                                                    Multiple motor configurations
                                                  • X-RSW Series

                                                  • Motorized rotary stages with built-in controllers
                                                    Worm gear driven for continuous rotation
                                                    Two lens holders allow for use as a polarizer mount
                                                    Speed up to 75 rpm and torque up to 2.25 N⋅m
                                                    20 kg centered load capacity
                                                    Built-in controller; daisy-chains with other Zaber products
                                                    Multiple X-Series products in a daisy-chain can share a single power supply
                                                    Custom versions available
                                                  • X-RSM Series

                                                  • Motorized rotary stages with built-in controllers
                                                    21 mm total height
                                                    0.02� repeatability
                                                    4 mm aperture
                                                    50 N load capacity
                                                    Worm gear driven for continuous rotation
                                                    Built-in controller; daisy-chains with other Zaber products
                                                • Motorized with Built-in Direct Reading Encoders

                                                    • RST-DE Series

                                                    • High precision motorized rotation stages with built-in direct reading encoders
                                                      Direct reading encoder for position correction; stage accuracy to 0.01�
                                                      Continuous 360� rotation stage
                                                      50.8 mm (2 inch) aperture with kinematic mounting options for repeatability of assembly
                                                      50 kg centered load capacity
                                                      Speed up to 24 �/s and torque up to 10 N⋅m
                                                      Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                      Custom versions available
                                                    • X-RST-AE Series

                                                    • High precision motorized rotary stages with built-in controllers and direct encoders

                                                      Speed up to 60�/s and torque up to 70 Nµm
                                                      300 kg centered load capacity
                                                      101.6 mm (4") aperture
                                                      Direct reading encoder for position correction; stage accuracy to 0.008�
                                                  • Motorized with Built-in Motor Encoders

                                                      • RST-E Series

                                                      • High load motorized rotation stages with built-in motor encoders

                                                        Encoder position feedback with slip/stall detection and automatic recovery
                                                        Continuous 360� rotation stage
                                                        50.8 mm (2 inch) aperture with kinematic mounting options for repeatability of assembly
                                                        50 kg centered load capacity
                                                        Speed up to 24 �/s and torque up to 10 N⋅m
                                                        Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                        Custom versions available
                                                      • RSB-E Series

                                                      • High speed motorized rotation stages with built-in motor encoders
                                                        Continuous 360� rotation stage
                                                        Speeds up to 300 rpm
                                                        50.8 mm aperture
                                                        Multiple motor configurations
                                                        Encoder position feedback with slip/stall detection and automatic recovery
                                                        Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                      • RSW-E Series

                                                      • Motorized rotation stages with built-in motor encoders
                                                        Worm gear driven for continuous rotation
                                                        Two lens holders allow for use as a polarizer mount
                                                        Speed up to 75 rpm and torque up to 225 N⋅cm
                                                        Encoder position feedback with slip/stall detection and automatic recovery
                                                        23 mm aperture
                                                        Designed for use with an X-MCB1 controller, or can be used with any 2-phase stepper motor controller
                                                        Custom versions available
                                                      • RSM-E Series

                                                      • Motorized rotation stages with built-in motor encoders
                                                        21 mm total height
                                                        0.02� repeatability
                                                        4 mm aperture
                                                        50 N load capacity
                                                        Worm gear driven for continuous rotation
                                                        Encoder position feedback with slip/stall detection and automatic recovery
                                                        Designed for use with a X-MCB1 controller or can be used with any 2-phase stepper motor controller
                                                    • Motorized

                                                        • RST Series

                                                        • High load motorized rotation stages
                                                          Continuous 360� rotation stage
                                                          50.8 mm (2 inch) aperture with kinematic mounting options for repeatability of assembly
                                                          50 kg centered load capacity
                                                          Speed up to 24 �/s and torque up to 10 N⋅m
                                                          Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                        • RSB Series

                                                        • High speed motorized rotation stages
                                                          Continuous 360� rotation stage
                                                          Speeds up to 300 rpm
                                                          50.8 mm aperture
                                                          Multiple motor configurations
                                                          Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                        • RSW Series

                                                        • Motorized rotation stages
                                                          Worm gear driven for continuous rotation
                                                          Two lens holders allow for use as a polarizer mount
                                                          Speed up to 75 rpm and torque up to 225 N⋅cm
                                                          23 mm aperture
                                                          Designed for use with a X-MCB1 controller or can be used with any 2-phase stepper motor controller
                                                          Custom versions available
                                                        • RSM Series

                                                        • Motorized rotation stages
                                                          21 mm total height
                                                          0.02� repeatability
                                                          4 mm aperture
                                                          50 N load capacity
                                                          Worm gear driven for continuous rotation
                                                          Designed for use with a X-MCB1 controller or can be used with any 2-phase stepper motor controller
                                                      • Stepper Motors

                                                          • X-NMS-E Series

                                                          • Stepper motors with built-in controllers and motor encoders
                                                            NEMA 17 stepper motor with built-in controller
                                                            Up to 25,600 microsteps per revolution
                                                            Up to 2,650 rpm speed and 30 N⋅cm torque
                                                            Home sensor and small magnet included, optional magnetic away sensor
                                                            Daisy-chains data and power with X-series products
                                                            Custom versions available
                                                          • X-NMS Series

                                                          • Stepper motors with built-in controllers
                                                            NEMA 17 stepper motor with built-in controller
                                                            Up to 25,600 microsteps per revolution
                                                            Up to 2,650 rpm speed and 30 N⋅cm torque
                                                            Home sensor and small magnet included, optional magnetic away sensor
                                                            Daisy-chains data and power with X-series products
                                                            Custom versions available
                                                          • NMS Series

                                                          • Stepper motors

                                                            Standard NEMA frame stepper motors
                                                            NEMA size 08 to 23 stepper motors offer a range of size and torque
                                                            Up to 3000 rpm speed and 1.8 Nµm torque
                                                            HS02 home sensor and magnet included
                                                            Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper motor controller
                                                            With AutoDetect, the X-MCC controller configures its settings automatically for the connected peripheral
                                                          • NMS-E Series

                                                          • Stepper motors with encoders

                                                            NEMA size 08 to 23 stepper motors offer a range of size and torque
                                                            Up to 3000 rpm speed and 1.8 Nµm torque
                                                            HS02 home sensor and magnet included
                                                            Built-in encoders provide slip/stall detection and recovery
                                                            Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper motor controller
                                                            With AutoDetect, the X-MCC controller configures its settings automatically for the connected peripheral
                                                        • Optical Mounts

                                                            • X-FWR-E Series

                                                            • Motorized filter wheels with built-in controllers and motor encoders
                                                              Interchangeable filter holders for 25 mm optics (10 positions) or 32 mm optics (7 positions)
                                                              Smooth, high speed filter changes; Adjacent filter change time of 57 ms (10 position wheel)
                                                              Built-in controller; daisy-chains with other Zaber products
                                                              Mounting provided for optical cage systems and C-mount components
                                                            • T-MM Series

                                                            • Motorized mirror mounts with built-in controllers
                                                              Two-axis kinematic mount with +/-5� range
                                                              Repeatability down to 0.015�
                                                              Holds 2" (50 mm) optics; adaptors available for C-Mount, 1" (25 mm), and 1/2" (12.5 mm) optics
                                                              Built-in controller; daisy-chains data and power with other T-Series products
                                                          • Gimbal Stages

                                                              • X-G-RST-DE Series

                                                              • High precision motorized gimbals with built-in controllers and direct encoders

                                                                360� continuous travel on both azimuth and elevation axes
                                                                Speed up to 24�/s; max torque 10 Nµm; max payload 15 kg
                                                                Direct reading encoder for slip/stall detection and position correction
                                                                300 and 500 mm width frame options
                                                              • X-GSM-E Series

                                                              • High load motorized gimbals with built-in controllers and motor encoders

                                                                360� continuous travel on both azimuth and elevation axes
                                                                Speed up to 24�/s; max torque 10 Nµm; max payload 15 kg
                                                                Encoder position feedback with slip/stall detection and automatic recovery
                                                                300 and 500 mm width frame options
                                                            • Goniometers

                                                                • X-GSM-E Series

                                                                • Motorized goniometers with built-in controllers and motor encoders
                                                                  40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                                  30 N load capacity
                                                                  Low profile, small footprint
                                                                  Built-in controller; daisy-chains with other Zaber products
                                                                  Encoder position feedback with slip/stall detection and automatic recovery
                                                                • X-GSM Series

                                                                • Motorized goniometers with built-in controllers
                                                                  40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                                  30 N load capacity
                                                                  Low profile, small footprint
                                                                  Built-in controller; daisy-chains with other Zaber products
                                                                • GSM Series

                                                                • Motorized goniometers
                                                                  40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                                  30 N load capacity
                                                                  Low profile, small footprint
                                                                  Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                • GSM-E Series

                                                                • Motorized goniometers with built-in motor encoders
                                                                  40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                                  30 N load capacity
                                                                  Low profile, small footprint
                                                                  Encoder position feedback with slip/stall detection and automatic recovery
                                                                  Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                              • Grippers

                                                                  • X-GLP-E Series

                                                                  • Parallel grippers with built-in motor encoders and controllers
                                                                    40 mm travel
                                                                    Grips and measures different sized objects without programming
                                                                    Position feedback from motor encoder
                                                                    Maintains grip even if power is lost
                                                                    Built-in controller
                                                                    Daisy-chains with other X-Series products to share a single power supply
                                                                    Includes removable finger blanks
                                                                  • GLP-E Series

                                                                  • Parallel grippers with motor encoders
                                                                    40 mm travel
                                                                    Measures size of gripped part with motor encoder
                                                                    Maintains grip even if power is lost
                                                                    Includes removable finger blanks
                                                                    Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                • Vacuum Devices

                                                                    • High Vacuum Devices with Built-in Controllers

                                                                        • X-LRQ-SV2 Series

                                                                        • High vacuum motorized linear stages with built-in controllers
                                                                          Vacuum compatible to 10-6 Torr
                                                                          75, 150, 300, 450, 600 mm travel
                                                                          100 kg load capacity
                                                                          Up to 205 mm/s speed and up to 100 N thrust
                                                                          Built-in controller; daisy-chains with other Zaber products
                                                                          Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                          Custom versions available
                                                                        • X-LSM-SV2 Series

                                                                        • High vacuum miniature motorized linear stages with built-in controllers
                                                                          Vacuum compatible to 10-6 Torr
                                                                          25, 50, 100, 150, 200 mm travel
                                                                          10 kg load capacity
                                                                          Up to 100 mm/s speed and up to 35 N thrust
                                                                          Built-in controller; daisy-chains with other Zaber products
                                                                          Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                          Custom versions available
                                                                        • X-VSR-SV2 Series

                                                                        • High vacuum vertical stages with built-in controllers
                                                                          Vacuum compatible to 10-6 Torr
                                                                          20 mm or 40 mm travel
                                                                          Up to 48 mm/s speed and up to 200 N thrust
                                                                          10 kg load capacity
                                                                          55 or 85 mm retracted height
                                                                          Built-in controller; daisy-chains with other Zaber products
                                                                          Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                        • X-RSW-SV2 Series

                                                                        • High vacuum motorized rotary stages with built-in controllers
                                                                          Vacuum compatible to 10-6 Torr
                                                                          Worm gear driven for continuous rotation
                                                                          20 kg load capacity
                                                                          Speed up to 100 �/s and torque up to 100 N⋅cm
                                                                          Integrated stepper motor controller and motor driver allows for easy-to-use control
                                                                          Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                        • X-RSM-SV2 Series

                                                                        • High vacuum light load rotary stages with built-in controllers

                                                                          Vacuum compatible to 10-6 Torr
                                                                          21 mm total height
                                                                          0.02� repeatability
                                                                          4 mm aperture
                                                                          Worm gear driven for continuous rotation
                                                                          Integrated stepper motor controller and motor driver allows for easy-to-use control
                                                                          Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                        • X-GSM-SV2 Series

                                                                        • High vacuum motorized goniometers with built-in controllers
                                                                          Vacuum compatible to 10-6 Torr
                                                                          40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                                          Built-in controller; daisy-chains with other Zaber products
                                                                          Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                        • X-NA-SV2 Series

                                                                        • High vacuum micro linear actuators with built-in controllers

                                                                          Vacuum compatible to 10-6 Torr
                                                                          25 and 50 mm travel
                                                                          Up to 30 mm/s speed and up to 25 N thrust
                                                                          Our most compact, precise and robust actuator
                                                                      • High Vacuum Devices with Stand-alone Controllers

                                                                          • LRQ-V2 Series

                                                                          • High vacuum motorized linear stages
                                                                            Vacuum compatible to 10-6 Torr
                                                                            75, 150, 300, 450, 600 mm travel
                                                                            100 kg load capacity
                                                                            Up to 205 mm/s speed and up to 100 N thrust
                                                                            Only 7 feedthrough wires required to control these units
                                                                            Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                          • LSM-V2 Series

                                                                          • High vacuum miniature motorized linear stages

                                                                            Vacuum compatible to 10-6 Torr
                                                                            25, 50, 100, 150, 200 mm travel
                                                                            10 kg load capacity
                                                                            Up to 100 mm/s speed and up to 35 N thrust
                                                                            Only 7 feedthrough wires required to control these units
                                                                            Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                            Custom versions available
                                                                          • GSM-V2 Series

                                                                          • High vacuum motorized goniometers
                                                                            Vacuum compatible to 10-6 Torr
                                                                            40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                                            Only 7 feedthrough wires required to control these units
                                                                            Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                          • VSR-V2 Series

                                                                          • High vacuum vertical stages
                                                                            Vacuum compatible to 10-6 Torr
                                                                            20 mm or 40 mm travel
                                                                            Up to 48 mm/s speed and up to 200 N thrust
                                                                            10 kg load capacity
                                                                            55 or 85 mm retracted height
                                                                            Only 7 feedthrough wires required to control these units
                                                                            Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                          • RSW-V2 Series

                                                                          • High vacuum motorized rotary stages
                                                                            Vacuum compatible to 10-6 Torr
                                                                            Worm gear driven for continuous rotation
                                                                            20 kg load capacity
                                                                            Speed up to 100 �/s and torque up to 100 N⋅cm
                                                                            Only 7 feedthrough wires required to control these units
                                                                            Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                          • RSM-V2 Series

                                                                          • High vacuum light load rotary stages
                                                                            Vacuum compatible to 10-6 Torr
                                                                            21 mm total height
                                                                            0.02� repeatability
                                                                            4 mm aperture
                                                                            Worm gear driven for continuous rotation
                                                                            Only 7 feedthrough wires required to control these units
                                                                            Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                        • Low Vacuum Devices with Built-in Controllers

                                                                            • X-LRQ-SV1 Series

                                                                            • Low vacuum motorized linear stages with built-in controllers
                                                                              Vacuum compatible to 10-3 Torr
                                                                              75, 150, 300, 450, 600 mm travel
                                                                              100 kg load capacity
                                                                              Up to 205 mm/s speed and up to 100 N thrust
                                                                              Built-in controller; daisy-chains with other Zaber products
                                                                              Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                              Custom versions available
                                                                            • X-LSM-SV1 Series

                                                                            • Low vacuum miniature motorized linear stages with built-in controllers
                                                                              Vacuum compatible to 10-3 Torr
                                                                              25, 50, 100, 150, 200 mm travel
                                                                              10 kg load capacity
                                                                              Up to 100 mm/s speed and up to 35 N thrust
                                                                              Built-in controller; daisy-chains with other Zaber products
                                                                              Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                              Custom versions available
                                                                            • X-VSR-SV1 Series

                                                                            • Low vacuum vertical stages with built-in controllers
                                                                              Vacuum compatible to 10-3 Torr
                                                                              20 mm or 40 mm travel
                                                                              Up to 48 mm/s speed and up to 200 N thrust
                                                                              10 kg load capacity
                                                                              55 or 85 mm retracted height
                                                                              Built-in controller; daisy-chains with other Zaber products
                                                                              Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                            • X-RSW-SV1 Series

                                                                            • Low vacuum motorized rotary stages with built-in controllers
                                                                              Vacuum compatible to 10-3 Torr
                                                                              Worm gear driven for continuous rotation
                                                                              20 kg load capacity
                                                                              Speed up to 100 �/s and torque up to 100 N⋅cm
                                                                              Integrated stepper motor controller and motor driver allows for easy-to-use control
                                                                              Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                            • X-RSM-SV1 Series

                                                                            • Low vacuum light load rotary stages with built-in controllers
                                                                              Vacuum compatible to 10-3 Torr
                                                                              21 mm total height
                                                                              0.02� repeatability
                                                                              4 mm aperture
                                                                              Worm gear driven for continuous rotation
                                                                              Integrated stepper motor controller and motor driver allows for easy-to-use control
                                                                              Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                            • X-GSM-SV1 Series

                                                                            • Low vacuum motorized goniometers with built-in controllers

                                                                              Vacuum compatible to 10-3 Torr
                                                                              40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                                              Built-in controller; daisy-chains with other Zaber products
                                                                              Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                            • X-NA-SV1

                                                                            • Low vacuum micro linear actuators with built-in controllers

                                                                              Vacuum compatible to 10-3 Torr
                                                                              25 and 50 mm travel
                                                                              Up to 30 mm/s speed and up to 25 N thrust
                                                                              Hardened ball-tip (removable so you can use the built-in threaded tip or a flat tip))
                                                                          • Low Vacuum Devices with Stand-alone Controllers

                                                                              • LRQ-V1 Series

                                                                              • Low vacuum motorized linear stages
                                                                                Vacuum compatible to 10-3 Torr
                                                                                75, 150, 300, 450, 600 mm travel
                                                                                100 kg load capacity
                                                                                Up to 205 mm/s speed and up to 100 N thrust
                                                                                Only 7 feedthrough wires required to control these units
                                                                                Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                              • LSM-V1 Series

                                                                              • Low vacuum miniature motorized linear stages
                                                                                Vacuum compatible to 10-3 Torr
                                                                                25, 50, 100, 150, 200 mm travel
                                                                                10 kg load capacity
                                                                                Up to 100 mm/s speed and up to 35 N thrust
                                                                                Only 7 feedthrough wires required to control these units
                                                                                Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                                Custom versions available
                                                                              • LSA-V1 Series

                                                                              • Low vacuum micro motorized linear stages
                                                                                Vacuum compatible to 10-3 Torr
                                                                                10 or 25 mm travel
                                                                                Up to 10 mm/s speed and up to 35 N thrust
                                                                                Fits into the most restrictive spaces
                                                                                Mounts directly in XY (requires AB106 angle bracket for Z axis/vertical mounting)
                                                                                Only 7 feedthrough wires required to control these units
                                                                                Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                              • VSR-V1 Series

                                                                              • Low vacuum vertical stages
                                                                                Vacuum compatible to 10-3 Torr
                                                                                20 mm or 40 mm travel
                                                                                Up to 48 mm/s speed and up to 200 N thrust
                                                                                10 kg load capacity
                                                                                55 or 85 mm retracted height
                                                                                Only 7 feedthrough wires required to control these units
                                                                                Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                              • RSW-V1 Series

                                                                              • Low vacuum motorized rotary stages
                                                                                Vacuum compatible to 10-3 Torr
                                                                                Worm gear driven for continuous rotation
                                                                                20 kg load capacity
                                                                                Speed up to 100 �/s and torque up to 100 N⋅cm
                                                                                Only 7 feedthrough wires required to control these units
                                                                                Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                              • RSM-V1 Series

                                                                              • Low vacuum light load rotary stages
                                                                                Vacuum compatible to 10-3 Torr
                                                                                21 mm total height
                                                                                0.02� repeatability
                                                                                4 mm aperture
                                                                                Worm gear driven for continuous rotation
                                                                                Only 7 feedthrough wires required to control these units
                                                                                Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                              • GSM-V1 Series

                                                                              • Low vacuum motorized goniometers
                                                                                Vacuum compatible to 10-3 Torr
                                                                                40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                                                Only 7 feedthrough wires required to control these units
                                                                                Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                            • Non-motorized

                                                                                  • TSB-V Series

                                                                                  • Low vacuum translation stages
                                                                                    Vacuum compatible to 10-3 Torr
                                                                                    28 and 60 mm travel
                                                                                    10 kg load capacity
                                                                                    Requires a T-NA-SV1 actuator to drive it
                                                                              • Micromanipulators

                                                                                    • M-LSM Series

                                                                                    • Motorized micromanipulators
                                                                                      Adjustable probe holder
                                                                                      Up to 14 mm/s speed and 15 N thrust
                                                                                      Plug and play controllers and Joystick included
                                                                                      25 mm travel XYZ with resolution finer than 0.05 µm
                                                                                      Programmable or joystick-activated 4th virtual axis to allow approach along probe angle
                                                                                • XY, XYZ & Gantry Systems

                                                                                    • XY Series

                                                                                    • Two-axis stages with built-in controllers13 mm up to 1000 mm travel per axis
                                                                                      Built-in controllers
                                                                                      Several units daisy-chain to a single serial port
                                                                                      Machinist's Square (SQ3) included free with all XY and XYZ systems
                                                                                      Available in various speed / resolution options
                                                                                      Custom versions available
                                                                                    • XYZ Series

                                                                                    • Three-axis stages with built-in controllers
                                                                                      13 mm up to 450 mm travel per axis
                                                                                      Built-in controllers
                                                                                      Several units daisy-chain to a single serial port
                                                                                      Machinist's Square (SQ3) included free with all XY and XYZ systems
                                                                                      Available in various speed / resolution options
                                                                                      Custom versions available
                                                                                    • GANTRY Series

                                                                                    • XY and XYZ Gantry Systems and Kits

                                                                                      User configurable; select from a wide variety of linear stage options to design the XY or XYZ gantry system that best suits your application requirements
                                                                                      LSQ-E Linear Stages: 150 to 600 mm travel; up to 30 kg max payload
                                                                                      LRT-EC Linear Stages: 500 to 1500 mm travel; up to 100 kg max payload
                                                                                      LC40 Linear Stages: 100 to 3500 mm travel; up to 50 kg max payload
                                                                                      Included X-MCC controller for up to three axes of coordinated motion, including tandem X-axis stages driven in parallel with lockstep synchronization to provide a superior stiffness and positional control
                                                                                      Multiple options for risers, stage orientations, cable guides, or optional Z/theta axes
                                                                                  • Automated Microscopes

                                                                                      • MVR Series

                                                                                      • Motorized inverted microscopes

                                                                                        Motorized XY movement, focus, and filter cube changes allow fully automated whole slide imaging and well plate scanning
                                                                                        Linear motor focus stage provides 20 nm minimum incremental move, 200 nm repeatability and zero backlash
                                                                                        Available with XY stage travel up to 305 mm
                                                                                        6-position motorized filter cube turret (X-FCR) accepts Zeiss �push & click� style filter cubes
                                                                                        Innovative quick-change objective system allows the objective to be changed in seconds and supports any objective thread
                                                                                      • X-LCA4 Serie

                                                                                      • 4-channel LED controllers

                                                                                        LED functions can be controlled via Zaber console or µmanager open source microscopy software
                                                                                        Drives 4 LEDs at up to 3 A per LED with extremely stable output
                                                                                        Each LED channel can be controlled independently through a USB connection that can be daisy chained with any Zaber X-Series devices
                                                                                      • X-FCR Series

                                                                                      • Motorized filter cube turrets

                                                                                        Holds up to 6 Zeiss push & click type filter cubes
                                                                                        Motorized turret with built-in controller allows filter cube changes in 350 ms
                                                                                        Daisy-chains with other Zaber devices for control through a single USB connection
                                                                                      • MKR Series

                                                                                      • Microscope cores

                                                                                        Modular microscope core includes X-FCR motorized filter cube turret and X-LDA linear motor focus stage Innovative quick-change objective system allows the objective to be changed in seconds and supports any objective thread Filter cube turret accepts six Zeiss "push & click" style filter cubes
                                                                                      • MLR Series

                                                                                      • Microscope reflected light illuminators

                                                                                        3 LED lamp channels, with customizable lamp combinations
                                                                                        Provides excitation for common fluorophores including DAPI, GFP, Cy3, FITC, TRITC, TxRed, Cy5 (MLR3B)
                                                                                      • MLT Series

                                                                                      • Microscope transmitted light illuminators

                                                                                        Single high intensity white LED lamp provides broad spectrum illumination
                                                                                        Includes long working distance condenser with adjustable aperture stop
                                                                                        Allows brightfield and phase contrast observation modes
                                                                                    • Motorized Microscope Stages

                                                                                        • X-ADR-AE Series

                                                                                        • Linear motor XY microscope stages with built-in controllers and linear encoders

                                                                                          130 x 100 mm or 250 x 100 mm travel options
                                                                                          1 nm resolution linear encoders provide 5 µm accuracy, 500 nm repeatability, and 50 nm minimum incremental move Ultra quiet linear motors provide 750 mm/s top speed and are maintenance free
                                                                                        • X-ASR-E Series

                                                                                        • Motorized XY microscope stages with built-in controllers and motor encoders

                                                                                          50 mm up to 305 mm travel per axis
                                                                                          Up to 12 µm accuracy; 2 µm repeatability; 85 mm/s speed
                                                                                          Easily adjustable non-contact hall sensor limit switches
                                                                                          Supported by µmanager and MetaMorph� Microscopy Automation & Image Analysis Software
                                                                                        • X-ASR Series

                                                                                        • Motorized XY microscope stages with built-in controllers

                                                                                          50 mm up to 305 mm travel per axis
                                                                                          Up to 12 µm accuracy; 2 µm repeatability; 85 mm/s speed
                                                                                          Easily adjustable non-contact hall sensor limit switches
                                                                                          Supported by µmanager and MetaMorph� Microscopy Automation & Image Analysis Software
                                                                                        • ASR-E Series

                                                                                        • Closed-loop motorized XY scanning stages with built-in motor encoders

                                                                                          50 mm up to 305 mm travel per axis
                                                                                          Easily adjustable non-contact hall sensor limit switches
                                                                                          Up to 12 µm accuracy; 2 µm repeatability; 85 mm/s speed
                                                                                          Supported by µmanager and MetaMorph® Microscopy Automation & Image Analysis Software
                                                                                          Custom versions available
                                                                                        • ASR Series

                                                                                        • Motorized XY microscope stages

                                                                                          50 mm up to 305 mm travel per axis
                                                                                          Easily adjustable non-contact hall sensor limit switches
                                                                                          Up to 12 µm accuracy; 2 µm repeatability; 85 mm/s speed
                                                                                          Supported by µmanager and MetaMorph® Microscopy Automation & Image Analysis Software
                                                                                          Custom versions available
                                                                                      • Controllers & Joysticks

                                                                                          • X-MCC Series

                                                                                          • Multi-axis universal motor controllers

                                                                                            Universal drive allows control of 1, 2, 3, or 4 axes, including bipolar stepper motors, linear motors, or voice coil motors with up to 6 Arms (10 A peak) per phase
                                                                                            Allows different control modes, including independent axis control with trapezoidal velocity profiles or interpolated multi-axis control with line, arc, or circle primitives
                                                                                            Uses AutoDetect to identify and configure attached Zaber AutoDetect peripherals
                                                                                            High speed single-ended quadrature encoder input and 3 limit switch inputs per axis
                                                                                            4 isolated digital inputs, 4 isolated digital outputs, 4 analog inputs, and 1 analog output
                                                                                            Multiple communications options: RS-232 and USB
                                                                                          • X-MCA Series

                                                                                          • Stepper Motor Controllers

                                                                                            Controls any bipolar stepper motor or actuator with high resolution using an integrated 1.0 Arms (1.4 A peak) per phase driver with customizable micro-stepping
                                                                                            Intuitive ASCII protocol simplifies complex automation tasks
                                                                                            Designed for easy mounting to panels, breadboards, lab benches, DIN rails and enclosures
                                                                                            Support linear and motor encoders for closed-loop control
                                                                                          • X-JOY3 Series

                                                                                          • Programmable 3-axis joystick

                                                                                            Controls up to three axes, each with programmable sensitivity and velocity profile
                                                                                            Compact bench-top design for manual control with or without a computer
                                                                                            Eight programmable keys for functions like storing and recalling positions
                                                                                            Intuitive ASCII protocol simplifies complex automation tasks
                                                                                            Custom versions available
                                                                                            Technical Article - Manual Control Using a Joystick