Videos
Loading the player ...
  • Offer Profile
  • Manufacturer of the LinMot Linear Motors, Guided Actuators, Servo Controllers and MagSpring constant force springs. LinMot motors provide extremely long life, high dynamics, and high repeatability at a moderate cost. Designed for wash down applications, material handling and the health care industry. LinMot multi-position controllers are available in a variety of field buses, and are easily programmable for even very complex motion profiles and multiple programs.
Product Portfolio

  • Linear Motors

  • LinMot linear motors are brushless synchronous motors, with integrated position measurement, overload protection, and an electronic nameplate.
    The linear motion is generated directly by electromagnetic forces, without the wear associated with mechanical elements.
    All motor components are cast in a solid steel tube and are thus optimally protected from damage and contamination (IP67).
    The motors are available in two versions, with direct cable exit or a rotating angle plug.

    • Direct Linear Drive
    • Integrated Position Measurement
    • Freely positionable along the entire stroke
    • Highly dynamic, with accelerations up to 400m/s2
    • Long service life: no gearboxes or seals
    • Clean room certificate / IP67 protection class

    • Cable or rotatable connector IP67

    • To address the cable routing concerns of machine designers, LinMot provides motors with either space saving cable and connector (pigtail) assemblies or rotatable connectors mounted right on the motor. LinMot motors adapt to your design requirements.

    • Motor forces up to 1024 N (230.1 lbs)

    • The standard motors are available in 15 different motor configurations with peak forces of from 33 to 1024 N (7-230.1 lbs). A total of over 300 standard motor specifications with strokes lengths of up to 1500 mm (5 feet) are available.
      In addition, the module design of LinMot® motors allows custom designs even in moderate quantities.

    • Stainless Steel Motor IP69K

    • LinMot introduces a complete new Linear Motor family P01-48x240F-SSC in Stainless Steel 1.4404/316 with the outstanding protection rating IP69K designed for applications in food, pharmaceutical and packaging machines.
      The new motor has a diameter of 60mm and an over all length of 350mm. It will be available with or without integrated water cooling with peak forces up to 500N.

  • Linear Modules

  • LinMot linear guides are compact guide units with integrated ball bearings or sleeve bearings for use with LinMot linear motors.
    They are used to mount the moving load, to absorb external forces, and as an antirotation guide. They provide high precision guidance and allow dynamic, precise positioning of the load.

    • Allow high speeds and accelerations
    • Dynamic and precise load positioning
    • Mounting plate with central mounting holes
    • Simple installation and compact form factor
    • Mechanically interchangeable with pneumatic H-guides
    • Available with ball bearings or sintered sleeve bearings

      • Bridge Guides B01

      • Series B01 bridge guides are compact guide units with integrated ball bearings or plain bushings, for operating LinMot P01 linear motors with high-clearance sliders. The rear end plate increases the mechanical stiffness of the bridge guide.
        Bridge Guides are used as load bearings, to resist external forces and rotational and bending moments, and as an anti-rotation device. They provide high-precision guidance and allow dynamic and precise positioning of the load.
        The load is mounted directly to the front plate of the linear guide. Mechanical dimensions and mounting options are compatible with pneumatic linear guides.
        The modular design allows simple addition of accessories, such as a mechanical brake or magnetic spring, for load balancing in vertical applications.

      • Linear Guides H01

      • Series H01 Linear Guides are compact guide units with integrated ball bearings or plain bushings, for operating LinMot P01 linear motors with standard or heavy duty sliders.
        H01 Linear Guides are used as load bearings, to resist external forces and rotational and bending moments, and as an anti-rotation device. They provide high-precision guidance and allow dynamic and precise positioning of the load.
        The load is mounted directly to the front plate of the linear guide. Mechanical dimensions and mounting options are compatible with pneumatic linear guides.
        The modular design allows simple addition of accessories, such as a mechanical brake or magnetic spring, for load balancing in vertical applications.

  • Servo Controllers

  • The wide range of controller products allows rapid implementation of simple applications with two end positions, up to complex, high-precision multi-axis applications with synchronization to a main electronic shaft.
    Connection to an overarching control system can be made via analog, digital, or serial interfaces, field busses, or ETHERNET. The wide variety of field bus interfaces and protocols ensure simple integration with a master PLC, industrial PC, or proprietary controller.

    • Single and multi-axis controllers with integrated power stage
    • Precise control of position, speed, acceleration, and force
    • Execution of internally stored motion profiles or sequences
    • Electronic cam disc for synchronization with a main drive
    • Digital trigger inputs and analog target value inputs
    • Serial communications, field buses, and industrial ETHERNET

    • E100/E1001 series

    • The Series E100 servo controller and powerful Series E1001 are compact, one, two or four-axis position controllers with 16-bit position resolution and integrated power elements.
      The controllers are suitable for simple and standard positioning tasks in the low to medium force range.

    • E1100 series

    • The controllers are suited for simple, standard and High-End positioning tasks in the range of small up to high forces of the LinMot Linear Motors. The flexible Controllers can also control any 1/2/3 phase linear or rotating motor. Specially the small brushless DC-Motors can be driven by the E1100 controllers and are fully integrated in the different available field bus systems.
      All the E1100 Systems can be upgraded with end reference switches, external position sensors and pneumatic brakes.
      The E1100 controllers possess analog and digital inputs and outputs, serial interfaces, field bus and ETHERNET connections. Therefore the controllers can be integrated in every PLC or PC environment.
      The flexibility of the E1100 Series makes them to universal Controllers for single and multiple axes application based on different Linear Motors, rotating motors and other actuators.

    • E1200 series

    • Series E1200 servo controllers are modular axis controllers, with 32-bit position resolution and an integrated power stage, for linear motors and rotary drives.
      The controllers are suitable for simplest, standard, and high-end positioning tasks, across the entire force range of the LinMot product range.
      The E1100 Servo Controller series are modular controllers for linear and rotating motors with a 32-Bit positioning resolution.

  • Magnetic Spring

      • MagSprings provide a constant force throughout their entire range of motion. They are totally passive devices requiring no electricity or pneumatic power. When used with LinMot linear motors in vertical applications, MagSprings are sized to raise vertical loads to a safe position upon power shutdown. Rather than using a large motor to raise the payload, now only a small motor is required to lower the payload during normal operations.

        • Constant Force
        • Totally Passive
        • Forces to 60 N.
        • Strokes to 275 mm.

        NTI AG has over 20 standard MagSprings.

        MagSpring Magnetic Spring

  • Software

      • Motor Sizing Software

      • LinMot Designer provides the user with a high-end layout tool for linear motions.
        Applications can be analyzed in seconds, and optimized according to various criteria.
        The integrated database then selects the appropriate LinMot drive components, without the need for extensive manual calculations.

      • Configuration Software

      • Two different versions of the operating software are available to match the intended users and their requirements.
        The simple version allows the beginner to implement point-to-point motions very quickly.
        Experienced users can also configure complex drive tasks very easily using the standard version.