Hangcha Group was founded in 1956. 66 years later, Hangcha Group continues to manufacture reliable material handling equipment. Quality and innovation are two of the reasons that Hangcha Group is ranked 8th globally in sales of material handling equipment, distributes to over 180 different countries, and employs over 5,400 people.
Now, we can offer a complete fleet of material handling equipment, from 1-48t internal combustion counterbalance forklift, 0.6-48t electric forklift trucks, warehouse equipment, 3-6t side loader, empty container handler, reach stacker, AGV and much more. Our annual production capacity is more than 400,000 units thanks to the intelligent manufacturing factory. In 2021, more than 247 000 new Hangcha units were sold worldwide
With the inherited exterior design of the dedicated XC lithium battery forklift and a smooth and sturdy profile, the whole vehicle is impact, elegant, stylish, sturdy and powerful.
The wide-view mast with optimized design is unlikely to obstruct the operator's line of sight. The enlarged opening size of the fork carriage enables a wider view, a large operation space, and excellent ergonomic design.
Both the drive and operating systems are vehicle-grade permanent magnet synchronization systems, equipped with a high-speed ratio gearbox with a driving speed, upslope degree and acceleration performance rival that of internal combustion vehicles, and the environmental performance better than that of internal combustion vehicles.
The cover of the vehicle is designed to be sealed to the water resistance level of IPX4. All the motor, electronic controls and high-voltage components reach the dust and water resistance level of IP67, a high protection level adequate to withstand harsh operating environments and ensure safety and reliability.
New designed wide view mast provides better forward view ability.
Multi functions big LED dashboard provides running hours, battery power, and self diagnosis functions, and with high accuracy even in bad environment.
Full open battery cover, easy for battery service easy opened counter weight cover, to protect internal controller to avoid water and dust World famous brand electronics are applied in motor controller, contactor, power plug, emergency switch, dashboard, and accelerators.
The performance is improved. The travel speed and lift speed are improved by 10%-20%. The body of the truck is reduced, and the flexibility is strengthened. Thanks to CAE (Computer Aided Engineering) technology, structural components are more balanced.
Increased digitization, additional central controller, CAN-bus structure, built-in multiple diagnostic, management functions and fault alarm are convenient for diagnosis.
Integrated fingertip system, pilot control, smart and accurate; Hydraulic brake curve optimization, smooth and easy control.
An optional rear-pillar assist grip with a horn button enhances safety of operator while traveling in reverse.
Optimized design provides outstanding visibility in all directions.
The fully-suspended gearbox, fully-suspended overhead guard, and fully-suspended seat realize three-stage vibration reduction to reduce vibration of the vehicle.
A wet axle is developed and used to significantly improve the reliability of the braking system and force transmission structural parts. (Wet brake, custom high-strength bolts, wheel side planetary reducer).
The new-generation high-efficiency energy-saving novel combination LED lighting system is energy-saving, while the performance and service life of the lights are significantly improved.
The new Dynamic load sensing hydraulic steering system contributes to reduce loss of hydraulic and improve energy efficiency.
The new automobile-style light/turn-signal lever and forward-reverse lever are ergonomically designed and arranged to improve comfort and productivity. The new, relocated easy-to-see LCD meter lets the operator check on all aspects of operational status at a glance.
A throttling device is adopted to avoid the mast being out of control even some pipes are broken.
Imported gear-box, multi-stage torque converter, big converter ratio, wide range of auto-adjust speed; stable and smooth shift, 2 stage forward and 1 stage backward, easy operation and maintenance.
HANGCHA-made crosswise steering axle; The steering with load sensor and adjustable steering device make the operation easily.
Multi-hydraulic valve make it easy to operate. Load sensor hydraulic system, dual pumps supply, dynamic load sensor priority valve, reduce power consumption, lower the hydraulic oil temperature.
The combined chassis structure provide the high intensity and low weight feature, increase the cooling area of the oil tank greatly.
The customer can choose Cummins turbo 6 cylinder engine or Yuchai engine which according with the GB3 Emission Regulation, high performance, low oil consumption, low speed with high torque, great capacity cooler.
ZF micro controller with 3 stage power-shiftis to make sure the high reliability. Using the most advanced TCU microelectronic control transmission proportional control valve to achieve uninterrupted power output and automatic transmission, no need the driver manual shift operation. Fault display and convenient diagnostic socket, greatly simplifying maintenance and repairs. German Kessler heavy load drive axle, with two stage speed adjust, multi-disc wet service brake system, is fully enclosed system with maintenance free.
International famous brand hydraulic valve,the main hydraulic pump, the guide handle.Load sensing hydraulic system, reduce the continuous load of engine ; Remote hydraulic control and electric control are simple and convenient. Multiple hydraulic testing points simplify the maintenance work.
Poclain hydraulic power brake, wet multi-disc service braking and spring action, caliper disc parking brake system with forced cooling by oil, is safe and reliable.
Single transverse arranged cylinder of steering axle has dual function, full hydraulic power steering, steering has priority, with load sensing function, for easy operation.
Safety technologies such as seat sensing, dynamic anti tipping protection, longitudinal dual anti-tipping protection, spreader twist-lock dual protection, startup anti-stalling protection, fault protection, etc. are used to ensure safe operations at all times.
The easy-to-remove hood is designed. All the maintenance points are in easily accessible and safe positions and the electric control cabinet wiring method is adopted, which greatly simplifies the maintenance and repair and improves the maintenance efficiency.
Electric proportional control, throttle following control, vertical lift control, intelligent cooling fan control and torque control enable efficient and flexible control.
Strong power system
With high performance and low fuel consumption, the low-speed high-torque VOLVO TAD1151VE engine has advanced fault diagnosis and fault protection functions. With a displacement of 10.8L, six in-line cylinders and low emission, it is turbocharged and meets EPA3, EUⅢA and China Stage III emission requirements.
ELME new-generation container spreader
For the new-generation ELME817 series telescopic container spreader, the design of the telescopic beam, turntable, etc. are optimized, so that the structural strength is increased, the weight of the spreader is 16% less than that of the spreader of the last generation and the service life is prolonged by 30%. The arrangement of the oil cylinder is changed.
Vehicle cooling management
Fans with electronic motors are used independently to cool hydraulic oil and brake oil, so that the requirements for use in the 50-degree high temperature environment are met. Torque converter oil temperature control management ensures that the gearbox works within the optimal temperature range.
The pitch-down streamlined design of the vehicle presents a vivid and sturdy profile. The optimized counterweight contour greatly reduces the turning radius of the vehicle, broadens the side rear and front rear views, and makes driving simple and safe.
The A Series Pallet Truck is completed with specialized industrial design of appearance. The entire truck features smooth lines and affluent sense of movement, and compact profile, with full consideration being given to ergonomics, in accord with the latest appearance design trend.
The three-point support design is applied, and side support system and elastic auxiliary wheels are provided to guarantee safety and reliability. With optimized design, the lifting rod is steady and reliable, bearing small force.
Release braking, reverse braking, and three types of emergency braking can ensure safety of traveling; Anti-sliding function on slope can ensure safety of operation.
It is equipped with permanent magnet brushless drive motor, with excellent performance, and a new 48V power supply system, with extremely low heat generation.
The REMA tiller of latest development is simple but reliable and beautiful, and all operations can be done easily with one hand.
The shock absorption design of foldable platform improves comfort greatly to the operator. Simple and beautiful tiller designed to operate all functions easily even by one hand.
The applied CANBUS structure to more reliable and faster command access. Regenerative brake and slope anti-slide function are offered by this truck.
Water-proof plugs and connectors applied to provide a reliable protection to electric system. The adopted unique floating suspension system ensures good driving wheels’ grip and excellent stability.
Integrated mast matched to chassis width. High resistance fork carriage and load arms made of robust pressed steel.
All commands integrated to the tiller, the function buttons can be operated in comfortable way. For safe use in confined areas, tiller operates in vertical position via crawl speed button.
The truck has the lowering intelligent protection function. When the forks are less than 150mm away from the ground, the side lowering button is ineffective. With the emergency reverse button at the head of the handle, when the truck runs back and there is emergency, it can effectively prevent the driver from injury.
With five-supporting-point and low gravity center design, a rugged construction makes the pallet truck that can be relied on. With the non-contact proximity switch, such switch has long service life and can operate reliably.
Compacted chassis design, makes the truck operated in limited spacious. Powerful AC traction motor with Curtis control system. Applied MOSEFET high frequency control.
Tiller is ergonomically designed for Max. driver’s comfort. Dual lift/lower button controls allow operation by either hand. Creep speed control button is available. Conductor belt is standard specification.
Battery discharge indicator with lifting interrupt as standard specification when 20% battery capacity available and inform the operator of recharge requirement. IP54 environment sealing, which protect the inside components. Open the back cover, every components are easy to reach.
All plug connectors are imported and waterproof, and all cables have reliable protection, which increases reliability of electrical system significantly.
The standard configuration of tortoise speed driving function allows the truck to move at slow speed more easily.
The soft landing system reduces lowering speed automatically when height from ground to fork is less than 100mm, which provides effective protection for goods.
The AC driving motor features excellent acceleration performance, outstanding climbing ability, low heat emission, and is brushless, and maintenance-free.
Back cover can be opened fully, and all components and parts are clear at a glance, which is very convenient for maintenance of the entire machine.
Electric power steering is standard specification, which provides flexible operation.
Automatic deceleration during turning.
AC motor without carbon brushes, maintenance-free, cost saving.
3-pivot and side support bar system design ensure the safe and reliability.
The three-support-point and low-gravity-center design is adopted. The high-strength steel plate framed structure is adopted for the chassis. The tractor has long service life.
The brushless, maintenance-free AC motor reduces operation cost significantly.
The full-floating hydraulic transmission gearbox, with 2WD and 4WD switch function, can provide higher running speed and stronger gradeability;
In developing the rough terrain forklift, comfort and easy operation is always considered, for example, improved vibrating levels, compound engine damper and full floating seat and cabin are all applied.
Adoption of new generation integrated electric box makes maintenance and repair convenient, layout becomes more reasonable and with better water-proof performance.
The distance to ground is 270mm for 3.0t, it offers greater maneuverability and keep the truck moving in the roughest of applications, and yet we keep a very low center of gravity, by using a distributed weight in the forklift, giving it an excellent stability.