• Offer Profile
  • Silverstone was established in 1995 and is today one of the biggest distributor for light material handling equipment in Europe.

    At Silverstone, we want to make it simple for our dealers and this through having a wide product assortment with a high availability, having a broad range of product knowledge as well as working a bit harder to satisfy our dealers.
Product Portfolio
  • Hand Pallet Trucks, Powered Pallet Trucks, High Lifters

      • Hand Pallet Trucks

          • Standard HPT single nylon, 4412-1150

          • Basic, light weighted pallet truck with single nylon wheels.

            Technical Data:
            • Capacity (kg) 2000
            • Weight (kg) 62
            • Steering wheels Nylon
            • Load wheels Singel nylon
            • Fork height (min/max) 85/200 mm
          • Standard HPT single PU, 4413-1150

          • Basic light weighted pallet truck with single PU wheels.

            Technical Data:
            • Capacity (kg) 2000
            • Weight (kg) 62
            • Steering wheels PU
            • Load wheels Single PU
            • Fork height (min/max) 85/200
          • Standard HPT boggie nylon, 4414-1150

          • Basic light weighted pallet truck with Bogie nylon wheels.

            Technical Data:
            • Capacity (kg) 2000
            • Weight (kg) 62
            • Steering wheels Nylon
            • Load wheels Bogie Nylon
            • Fork height (min/max) 85/200
          • Standard HPT boggie nylon, 4414-1150

          • Basic light weighted pallet truck with Bogie nylon wheels.

            Technical Data:
            • Capacity (kg) 2000
            • Weight (kg) 62
            • Steering wheels Nylon
            • Load wheels Bogie Nylon
            • Fork height (min/max) 85/200
          • HPT, single nylon, 6612-1000

          • 6612-1000
            • Heavy duty
            • RS Bearings
            • Lifts 2500 kg

            Maintenance free hand pallet truck with robust and strong chassis for rough and heavy handling. Normal lift function for easy lifting of heavy loads. Equipped with a built-in overload valve and maintenance free bushings. Lifts 7 mm/stroke.

            Closed hydraulic system with a one piece cast pump housing.
            5 year warranty on pump.

            Technical Data:
            • Capacity (kg) 2500
            • Fork dimensions B160 x L1000 x H(min/max)85/205
            • Outer fork width 540
            • Weight (kg) 84
            • Steering wheels Nylon
            • Load wheels Singel Nylon
          • HPT, single nylon, 6612-1150

          • 6612-1150
            • Heavy duty
            • RS Bearings
            • Lifts 2500 kg

            This high quality maintenance-free pallet
            truck has a reinforced and durable chassis
            for tough and heavy handling. Normal lift
            functions for easy lifting of heavy loads.
            Equipped with a built-in overload valve and
            maintenance-free bushings. Lift speed 7
            mm/stroke.

            Technical Data:
            • Capacity (kg) 2500
            • Fork dimensions B160 x L1150 x H(min/max)85/205
            • Outer fork width 540
            • Weight (kg) 85
            • Steering wheels Nylon
            • Load wheels Singel Nylon


             
          • HPT, singel nylon, 680x1000

          • 6612-68-1000
            • Heavy duty
            • RS Bearings
            • Lifts 2500 kg

            This high quality maintenance-free pallet
            truck has a reinforced and durable chassis
            for tough and heavy handling. Normal lift
            functions for easy lifting of heavy loads.
            Equipped with a built-in overload valve and
            maintenance-free bushings. Lift speed 7
            mm/stroke.

            Technical Data:
            • Capacity (kg) 2500
            • Fork dimensions B160 x L1000 x H(min/max)85/205
            • Outer fork width 680
            • Weight (kg) 85
            • Steering wheels Nylon
            • Load wheels Singel Nylon

             
          • HPT, singel nylon, 680x1150

          • 6612-68-1150
            • Heavy duty
            • RS Bearings
            • Lifts 2500kg

            This high quality maintenance-free pallet
            truck has a reinforced and durable chassis
            for tough and heavy handling. Normal lift
            functions for easy lifting of heavy loads.
            Equipped with a built-in overload valve and
            maintenance-free bushings. Lift speed 7
            mm/stroke.

            Technical Data:
            • Capacity (kg) 2500
            • Weight (kg) 85
            • Steering wheels Nylon


             
          • HPT, singel nylon 6612-800

          • 6612-800
            • Heavy duty
            • RS Bearings
            • Lifts 2500 kg

            This high quality maintenance-free pallet
            truck has a reinforced and durable chassis
            for tough and heavy handling. Normal lift
            functions for easy lifting of heavy loads.
            Equipped with a built-in overload valve and
            maintenance-free bushings. Lift speed 7
            mm/stroke.

            Technical Data:
            • Capacity (kg) 2500
            • Fork dimensions B160 x L800 x H(min/max)85/205
            • Outer fork width 540
            • Weight (kg) 77-82
            • Steering wheels Nylon
            • Load wheels Singel Nylon
          • HPT, singel nylon 6612-900

          • 6612-900
            • Heavy duty
            • RS Bearings
            • Lifts 2500 kg

            This high quality maintenance-free pallet
            truck has a reinforced and durable chassis
            for tough and heavy handling. Normal lift
            functions for easy lifting of heavy loads.
            Equipped with a built-in overload valve and
            maintenance-free bushings. Lift speehttps://www.silverstone.se/en/products/2/2/gaffelvagn-enkelhjul-pu/d 7
            mm/stroke.

            Technical Data:
            • Capacity (kg) 2500
            • Fork dimensions B160 x L900 x H(min/max)85/205
            • Outer fork width 540
            • Weight (kg) 83
            • Steering wheels Nylon
            • Load wheels Singel Nylon


             
          • HPT, single PU 6613-1150

            • Heavy duty
            • RS Bearings
            • Lifts 2500 kg

            This high quality maintenance-free pallet
            truck has a reinforced and durable chassis
            for tough and heavy handling. Normal lift
            functions for easy lifting of heavy loads.
            Equipped with a built-in overload valve and
            maintenance-free bushings. Lift speed 7
            mm/stroke.

            Closed hydraulic system with a one piece cast pump housing.
            5 year warranty on pump.

            Technical Data:
            • Capacity (kg) 2500
            • Fork dimensions B160 x L1150 x H (min/max)85/205
            • Outer fork width 540
            • Weight (kg) 81
            • Steering wheels PU
            • Load wheels Singel PU
          • HPT, double nylon 6614-1150

            • Heavy duty
            • RS Bearings
            • Lifts 2500 kg

            This high quality maintenance-free pallet
            truck has a reinforced and durable chassis
            for tough and heavy handling. Normal lift
            functions for easy lifting of heavy loads.
            Equipped with a built-in overload valve and
            maintenance-free bushings. Lift speed 7
            mm/stroke.

            Closed hydraulic system with a one piece cast pump housing.
            5 year warranty on pump

            Technical Data:
            • Capacity (kg) 2500
            • Fork dimensions B160 x L1150 x H (min/max)85/205
            • Outer fork width 540
            • Weight (kg) 84
            • Steering wheels Nylon
            • Load wheels Boggie Nylon
          • HPT, double nylon 6614-900

            • Heavy duty
            • RS Bearings
            • Lifts 2500 kg

            This high quality maintenance-free pallet
            truck has a reinforced and durable chassis
            for tough and heavy handling. Normal lift
            functions for easy lifting of heavy loads.
            Equipped with a built-in overload valve and
            maintenance-free bushings. Lift speed 7
            mm/stroke.

            Technical Data:
            • Capacity (kg) 2500
            • Fork dimensions B160 x L900 x H(min/max)85/205
            • Weight (kg) 82
            • Steering wheels Nylon
            • Load wheels Boggie Nylon


             
          • HPT, double PU 6615-1150

            • Heavy duty
            • RS Bearings
            • Lifts 2500 kg

            This high quality maintenance-free pallet
            truck has a reinforced and durable chassis
            for tough and heavy handling. Normal lift
            functions for easy lifting of heavy loads.
            Equipped with a built-in overload valve and
            maintenance-free bushings. Lift speed 7
            mm/stroke.

            Closed hydraulic system with a one piece cast pump housing.
            5 year warranty on pump.

            Technical Data:
            • Capacity (kg) 2500
            • Fork dimensions B160 x L1150 x H(min/max)85/205
            • Outer fork width 540
            • Weight (kg) 85
            • Steering wheels PU
            • Load wheels Boggie PU
          • HPT, double PU 6615-1500

          • 6615-1500
            • Heavy duty
            • RS Bearings
            • Lifts 2000 kg

            This high quality maintenance-free pallet
            truck has a reinforced and durable chassis
            for tough and heavy handling. Normal lift
            functions for easy lifting of heavy loads.
            Equipped with a built-in overload valve and
            maintenance-free bushings. Lift speed 7
            mm/stroke.

            Technical Data:
            • Capacity (kg) 2000
            • Fork dimensions B160 x L1500 x H(min/max)85/205
            • Outer fork width 540
            • Weight (kg) 132
            • Steering wheels PU
            • Load wheels Boggie PU


             
          • HPT, double PU 6615-2000

          • 6615-2000
            • Heavy duty
            • RS Bearings
            • Lifts 1500kg

            This high quality maintenance-free pallet
            truck has a reinforced and durable chassis
            for tough and heavy handling. Normal lift
            functions for easy lifting of heavy loads.
            Equipped with a built-in overload valve and
            maintenance-free bushings. Lift speed 7
            mm/stroke.

            Technical Data:
            • Capacity (kg) 1500
            • Fork dimensions B160 x L2000 x H(min/max)85/205
            • Outer fork width 540
            • Weight (kg) 150
            • Steering wheels PU
            • Load wheels Boggie PU


             
          • HPT, double PU 6615-900

          • 6615-900
            • Heavy duty
            • RS Bearing
            • Lifts 2500kg

            This high quality maintenance-free pallet
            truck has a reinforced and durable chassis
            for tough and heavy handling. Normal lift
            functions for easy lifting of heavy loads.
            Equipped with a built-in overload valve and
            maintenance-free bushings. Lift speed 7
            mm/stroke.

            Technical Data:
            • Capacity (kg) 2500
            • Fork dimensions B160 x L900 x H(min/max)85/205
            • Outer fork width 540
            • Weight (kg) 83
            • Steering wheels PU
            • Load wheels Boggie PU


             
          • HPT 3ton, double PU 8815-1150

            • Capacity 3000 kg
            • Fork length: 1150mm
            • 2 years warranty of pump
            Maintenance free hand pallet truck with robust and strong chassis for rough and heavy handling. Normal lift function for easy lifting of heavy loads for loads up to 3000kg. Equipped with a built-in overload valve and maintenance free bushings. Lifts 7 mm/stroke.

            Technical Data:
            • Capacity (kg) 3000
            • Fork lenght (mm) 1150
            • Fork width, total/fork (mm) 540/160
            • Weight (kg) 77
            • Steering wheel PU
            • Fork wheel Boggie PU
            • Fork height min/max (mm) 85/205

             
          • Galvanized PT.boggie 540 x 1150 HPG20S

            • Capacity 2000 kg
            • Fork length: 1150mm
            • Steering wheel: Nylon
            • Fork wheel: Boggie nylon

            The galvanized pallet truck is a low cost alternative to the stainless steel truck. The warm galvanized truck can “heal” small scratches which mean less corrosion. Same equipped as the stainless steel truck plus grease nipples

            Technical Data:

            • Capacity (kg) 2000
            • Fork lenght (mm) 1150
            • Fork width, total/fork (mm) 540/160
            • Weight (kg) 75
          • Low profile HPT, W=540,L=1150 HPL20S

            • Capacity 2000 kg
            • Fork length: 1150mm
            • Steering wheel: PU
            • Fork wheel: Boggie PU
            This low profile pallet truck is only 51 mm high in its lowest position. Used for extra low pallets. Reinforced forks and chassis enables this low profile version.

            Technical Data:
            • Capacity (kg) 2000
            • Fork lenght (mm) 1150
            • Fork width, total/fork (mm) 540/160
            • Weight (kg) 75
            • Steering wheel PU
            • Fork wheel Boggie PU
            • Fork height min/max (mm) 51/175
          • Stainless HPT,tandem nylon, 540 HPS20S

            • Capacity 2000 kg
            • Fork length: 1150mm
            • Steering wheel: Nylon
            • Fork wheel: Boggie nylon

            Pallet truck made of acid proof stainless steel, suitable for wet handling and corrosive applications. Equipped with overload valve, maintenance-free bushings/bearings (RS), protected and sealed hydraulics and grease nipples, to ensure a long life. Boggie nylon wheels.

            Technical Data:

            • Capacity (kg) 2000
            • Fork lenght (mm) 1150
            • Fork width, total/fork (mm) 540/160
            • Weight (kg) 75
            • Steering wheel Nylon
            • Fork wheel Boggie Nylon
            • Fork height min/max (mm) 85/205
          • Low profile HPT , W=530, 35mm

            • Capacity 2000 kg
            • Fork length: 1150mm
            • Steering wheel: PU
            • Fork wheel: Boggie steel

            This low profile pallet truck is only 35 mm high in its lowest position. Used for extra low pallets. Reinforced forks and chassis enables this low profile version. The HPSL20S has steel wheels.

            Tachnical Data:
            • Capacity (kg) 2000
            • Fork lenght (mm) 1150
            • Fork width, total/fork (mm) 540/160
            • Weight (kg) 70
            • Steering wheel PU
            • Fork wheel Steel wheelFork height min/max (mm) 35/160
          • HPT with scale 2000kg ZF20S

            • Fork length: 1150mm
            • Accuracy 0,1%
            • Steering wheel: PU
            • Fork wheel: Boggie PU
            Stationary and mobile weighing can be used also as a normal pallet truck. Accuracy is 0,1% of the total weight, 1 kg graduation. IP65. Four load cells for accurate weighing even when loads are uneven. Tara function to add on or withdraw from net weight. Weighing device powered with 4 pcs 1,5V type AA batteries. Display turns off automatically after 3 min in standby position.  

            Technical Data:
            • Capacity (kg) 2000
            • Fork lenght (mm) 1150
            • Fork width, total/fork (mm) 555/180
            • Weight (kg) 117
            • Steering wheel PU
            • Fork wheel Boggie PU
               
          • HPT, rubber/singel nylon Q7712-1150

            • Lifts 2300 kg
            • Quick Lift 25 mm/stroke
            • RS Bearings
            • Ergonomic Handle

            Popular maintenance-free pallet truckwith quick lifting system, overload valve and maintenance free bushings. Robust and basic design to ensure long life. 5 year warranty.

            Option:
            • Foot brake for improved safety
            • Single or bogie wheels of N/PU. Double entry/exit rollers.
            Technical Data:
            • Capacity (kg) 2300
            • Fork dimensions B150 x L1150 x H(min/max)85/205
            • Outer fork width 530
            • Weight (kg) 72
            • Steering wheels Gummi
            • Load wheels Singel Nylon
          • HPT, rubber/singel nylon Q7712-915

            • Capacity 2300 kg
            • Fork length: 915mm
            • 3 years warranty of pump
            • Quicklift

            Popular maintenance-free pallet truck with quick lifting system, overload valve and maintenance free bushings. Robust and basic design to ensure long life. 3 year warranty. 

            Technical Data:
            • Capacity (kg) 2300
            • Fork lenght (mm) 900
            • Fork width, total/fork (mm) 540/160
            • Weight (kg) 63-66
            • Steering wheel Rubber
            • Fork wheel Single Nylon
            • Fork height min/max (mm) 85/205
          • HPT, rubber/singel PU Q7713-915

            • Lifts 2300 kg
            • Quick Lift 25 mm/stroke
            • RS Bearings
            • Ergonomic Handle

            Popular maintenance-free pallet truck
            with quick lifting system, overload valve and
            maintenance free bushings. Robust and basic
            design to ensure long life. 5 year warranty.

            Technical Data:
            • Capacity (kg) 2300
            • Fork dimensions B150 x L915 x H(min/max)85/205
            • Outer fork width 540/160
            • Weight (kg) 71
            • Steering wheels Gummi
            • Load wheels Singel PU


             
          • HPT, rubber/singel PU Q7713-1150

            • Lifts 2300 kg
            • Quick Lift 25 mm/stroke
            • RS Bearings
            • Ergonomic Handle

            Popular maintenance-free pallet truck
            with quick lifting system, overload valve and
            maintenance free bushings. Robust and basic
            design to ensure long life. 5 year warranty.

            Option:
            • Foot brake for improved safety
            • Single or bogie wheels of N/PU. Double entry/exit rollers.
            Technical Data:
            • Capacity (kg) 2300
            • Fork dimensions B150 x L1150 x H(min/max)85/205
            • Outer fork width 530
            • Weight (kg) 73
            • Steering wheels Gummi
            • Load wheels Singel PU
          • HPT, rubber/double nylon Q7714-915

            • Lifts 2300 kg
            • Quick Lift 25 mm/stroke
            • RS Bearings
            • Ergonomic Handle

            Popular maintenance-free pallet truck
            with quick lifting system, overload valve and
            maintenance free bushings. Robust and basic
            design to ensure long life. 5 year warranty.

            Technical Data:
            • Capacity (kg) 2300
            • Fork dimensions B150 x L915 x H(min/max)85/205
            • Outer fork width 540/160
            • Weight (kg) 72
            • Steering wheels Gummi
            • Load wheels Boggie Nylon


             
          • Gaffelvagn, boggi PU Q7715-915

            • Capacity 2300 kg
            • Fork length: 915mm
            • 3 years warranty of pump
            • Quicklift

            Popular maintenance-free pallet truck with quick lifting system, overload valve and maintenance free bushings. Robust and basic design to ensure long life. 3 year warranty. 

            Technical Data:
            • Capacity (kg) 2300
            • Fork lenght (mm) 900
            • Fork width, total/fork (mm) 540/160
            • Weight (kg) 65-68
            • Steering wheel Rubber
            • Fork wheel Boggie PU
            • Fork height min/max (mm) 85/205
          • HPT, rubber/double PU Q7715-1150

            • Capacity 2300 kg
            • Fork length: 1150mm
            • 3 years warranty of pump
            • Quicklift

            Popular maintenance-free pallet truckwith quick lifting system, overload valve and maintenance free bushings. Robust and basic design to ensure long life. 5 year warranty.

            Option:
            • Foot brake for improved safety
            • Single or bogie wheels of N/PU. Double entry/exit rollers.
            Technical Data:
            • Capacity (kg) 2300
            • Fork dimensions B150 x L1150 x H(min/max)85/205
            • Outer fork width 530
            • Weight (kg) 75
            • Steering wheels Gummi
            • Load wheels Boggie PU
          • HPT, nylon/singel nylon Q7716-1150

            • Lifts 2300 kg
            • Quick Lift 25 mm/stroke
            • RS Bearings
            • Ergonomic Handle

            Popular maintenance-free pallet truck
            with quick lifting system, overload valve and
            maintenance free bushings. Robust and basic
            design to ensure long life. 5 year warranty.

            Option:
            • Foot brake for improved safety
            • Single or bogie wheels of N/PU. Double entry/exit rollers.
            Technical Data:
            • Capacity (kg) 2300
            • Fork dimensions B150 x L1150 x H(min/max)85/205
            • Outer fork width 530
            • Weight (kg) 73
            • Steering wheels Nylon
            • Load wheels Singel Nylon
          • HPT with scale. ZF20S

            • Electronic scale
            • Capacity 2000 kg

            Equipped with electronic scale.
            Stationary and mobile weighing can be used also as a normal pallet truck.
            Accuracy is 0,1% of the total weight, 1 kg graduation. IP65.
            Four load cells for accurate weighing even when loads are uneven.
            Tara function to add on or withdraw from net weight.
            Weighing device powered with 4 pcs 1,5V type AA batteries.
            Display turns off automatically after 3 min in standby position.

            Technical Data:
            • Capacity (kg) 2000
            • Fork dimensions B180 x L1150 x H(min/max)85/205
            • Outer fork width 555
            • Weight (kg) 117
            • Steering wheels PU
            • Load wheels Boggie PU
          • HPT with scale and printer ZFP20S

            • Electronic scale
            • Capacity 2000 kg
            • Thermo printer.

            Equipped with electronic scale.
            Stationary and mobile weighing can be used also as a normal pallet truck.
            Accuracy is 0,1% of the total weight, 1 kg graduation. IP65.
            Four load cells for accurate weighing even when loads are uneven.
            Tara function to add on or withdraw from net weight.
            Weighing device powered with 4 pcs 1,5V type AA batteries.
            Display turns off automatically after 3 min in standby position.

            ZFP20S is equipped with thermo printer.
            • Roll diameter: 40 mm
            • Warning signals: No battery, no paper, low temperature
            Technical Data:
            • Capacity (kg) 2000
            • Fork dimensions B180 x L1150 x H(min/max)85/205
            • Outer fork width 555
            • Weight (kg) 118
            • Steering wheels PU
            • Load wheels Boggie PU
        • Powered Pallet Trucks

            • Full Electric pallet-truck T20-12EZ

              • Lithium battery
              • Extremely compact design
              • Ergonomic handle
              • Capacity 1200kg
              • Turning radius 1350mm
              • Weight 115kg

              A compact and fast electric pallet truck with electrical liftning and manual lowering function. Maintenance-free and removable 20Ah lithium battery provides minimum 3 hours effective use. External charging dock allows you to charge an extra battery while using the truck. The charging time is only 2,5 hours, which together with an extra battery makes it possible to use the truck 24-7.
            • Full-Electric pallet-truck T20-15ET-1400

              • Compact design
              • Ergonomic handle
              • Reliable CURTIS steering system
              • Battery indicator & emergency brake

              Affordable full-electric pallet truck with many advantages.

              Built-in charger with a 24V/85 Ah maintenance free battery which lasts a full working day. Curtis controller provides reliability and is easily adapted to the operator. Electromagnetic disc brake ensures that braking is always safe and reliable. A throughout safety thinking have among many things resulted in a creep function and an automatic decrease of speed at sturdy or sudden turnings. Ergonomically designed handle and controls makes the machine comfortable and easy to operate. Friendly to operator’s arms and shoulders. Machine can handle most pallets and has a capacity of 1500 kg.

              Perfect for:

              • Moving goods
              • Work shops
              • Stores
              • Warehouses
              • Trucks
            • Electric pallet-truck, scale T20-15ET-SC

            • T20-15ET-SC holds the same advantages as its forerunner T20-15ET, and is furthermore equipped with a scale.

              • Compact design
              • Ergonomic handle
              • Reliable CURTIS steering system
              • Battery indicator & emergency brake

              Affordable full-electric pallet truck with many advantages.
              Built-in charger with a 24V/85 Ah maintenance free battery which lasts a full working day. Curtis controller provides reliability and is easily adapted to the operator. Electromagnetic disc brake ensures that braking is always safe and reliable. A throughout safety thinking have among many things resulted in a creep function and an automatic decrease of speed at sturdy or sudden turnings. Ergonomically designed handle and controls makes the machine comfortable and easy to operate. Friendly to operator’s arms and shoulders. Machine can handle most pallets and has a capacity of 1500 kg.

              The scale

              • With backlight and tara function.
              • Addition function
              • Precision 1 kg
              • Equipped with 4 load cells
              • Battery

              Perfect for:
              • Moving goods
              • Work shops
              • Stores
              • Warehouses
              • Trucks
            • Full-Electric pallet-truck T20-15ET2

              • Compact and user-friendly design
              • Energy-efficient
              • Controller hibernation mode, automatically shuts off to save energy
              • Battery meter and key switch positioned at the tiller arm ensuring better observation
              • Maintenance free battery
              • Electromagnetic brakes

              Affordable, user-friendly and low energy exhausting full-electric pallet truck. Capacity 1500 kg.  

              Technical Data:

              • Capacity (kg) 1500
              • Ground clearance 30 mm
              • Fork dimensions 50/150/1150
              • Adjustable fork width (mm) 560/685
              • Length to face of fork 488
              • Weight (kg) 205
              • Axle loading with load, operator/load side 550/1155
              • Axle loading without load, operator/load side 180/25
              • Tyre type PU/PU
              • Steering wheels Ø210x70
              • Load wheels 2x Ø78x60
              • Number of wheels (x=driving wheel) 1x /4 / 1x/2
              • Load center 600 mm
              • Lowest height, working platform (mm) 80
              • Total length 1638 mm
              • Total width 568/685 mm
              • Lift height 115 mm
            • El. P-T.with sup. wheels, 1000 T20-15ETS

              • News: Better battery capacity!
              • With two support wheels
              • Reddot design award
              • Ergonomic handle
              • Reliable CURTIS steering system
              • Battery indicator & emergency brake
              • 1000 or 1150 mm fork length

              Affordable full-electric pallet truck with many advantages.
              Two support wheels enhance stability and safety.
              Built-in charger with a 24V/85 Ah maintenance free battery which lasts a full working day. Curtis controller provides reliability and is easily adapted to the operator. Electromagnetic disc brake ensures that braking is always safe and reliable. A throughout safety thinking have among many things resulted in a creep function and an automatic decrease of speed at sturdy or sudden turnings. Ergonomically designed handle and controls makes the machine comfortable and easy to operate. Friendly to operator’s arms and shoulders. Machine can handle most pallets and has a capacity of 1500 kg. Available with 1000 or 1150 mm forks.


              Perfect for:
              • Moving goods
              • Work shops
              • Stores
              • Warehouses
              • Trucks
            • Full-Electric truck - city climbing T20-16ET

              • Capacity 1600kg
              • Built-in charger
              • Air suspension
              • Climbing wheel

              Compact designed full electric pallet truck with air suspension for smooth handling on rough surface. Climbing wheel to overcome obstacles.

              Maintenance free AGM-batteries, 4x12V/30 Ah will last for 6 effective working hours after every charge cycle. Built-in charger. Inner components can be accessed through one single step of opening the upper cover. Change of steering wheel in 5 minutes by unsrcrewing a singel nut.

              Technical Data:

              • Type Walkie
              • Capacity (kg) 1600
              • Ground clearance 30
              • Weight (kg) 215
              • Wheel type PU/PU
              • Steering wheel Ø255x74
              • Wheels (x=driving wheel) 1x +2/4
              • Total length 1685
              • Total width 560
              • Turning radius 1465
              • Travel speed, load/no load 4/4,5
              • Max gradeability, load / no load 8/16
              • Lift motor (kW) 0,84
              • Lifting height 80-220
              • Drive control DC 0,75
              • Steering system CURTIS
              • Battery (V/Ah) 48/30
              • Battery type Maintenance free
              • Brakes Electromagnetic
            • Full-Electric pallet-truck T20-18ET

            • T20-18ET is as strong and smooth (and holds the same advantages) as its forerunner, but with a capacity of 1800 kg.

              • Fast (up to 5,8 km/h)
              • 10 ° gradeability
              • ZAPI steering system
              • AC drive control
              • Battery indicator & emergency brake

              Compact designed full electric pallet truck with high performance.
              Maintenance free AGM-battery, 2x12V/85 Ah will last for 4 effective working hours after every charge cycle. Built-in charger. Zapi electronic control system which can be tuned to operators profile. Electromagnetic disc brake ensures that braking is always safe and reliable. Integrated “turtle speed” when handle bar is tilted 15 degrees which enables precision drive in narrow spaces.

              Perfect for:
              • Moving goods
              • Work shops
              • Stores
              • Warehouses
              • Trucks
            • Full-Electric truck - air suspensionT20-20ET

            • Smooth and easy-to-use powered hand pallet
              truck. Maintenance-free and replaceable 24V / 20Ah
              battery provides 3 hours of effective use.
              External charger.

              • Electric
              • Maintenance-free batteries
              • Drive motor for professional use

            • Full Electric pallet-truck, 1500kg, lithiumT20-PL153

            • Smooth and easy-to-use powered hand pallet
              truck. Maintenance-free and replaceable 24V / 20Ah
              battery provides 3 hours of effective use.
              External charger.

              • Electric
              • Maintenance-free batteries
              • Drive motor for professional use
            • Full Electric pallet-truck, 1600kg, lithium T20-PL163Z

            • Smooth and easy-to-use powered hand
              pallet truck. Maintenance-free and removable
              24V/30Ah battery provides 4 hours of effective
              use. Built-in charger.

              • Electric
              • Maintenance-free batteries
              • Built-in charger
              • Crawl speed function
              • Drive motor for professional use
              • support wheels
            • Electric Truck with platform

              • Fast (8,5 km/h)
              • Compact design
              • Foldable handles
              • Foldable, chock wave absorbing rider stand
              • 210 Ah industry battery
              • AC drive control

              Silverstone T20-20RA is a stand-on pallet mover for quick movements of goods. Latest generation AC motor technology ensures good performance and high security.

              Regenerative, electromagnetic brakes provides good performance and reduces wear-out. High quality components to achieve the best operating economy, e.g. lifting motor from Bucher. A travel speed of 8.5 km/h provides efficient and fast transportations. 210 Ah battery enables T20-20RA to operate a full working day. Even more powerful batteries are available if needed.

              Perfect for:
              • Warehouses
              • Work shops
              • Trucks
              • Terminals
            • Electric Truck, platform, EPS T20-20RAS

              • EPS
              • Fast (8,5 km/h)
              • Compact design
              • Foldable handles
              • Foldable, chock wave absorbing rider stand
              • 210 Ah industry battery
              • AC drive control

              Silverstone T20-20RAS is a stand-on pallet mover for quick movements of goods. Latest generation AC motor technology ensures good performance and high security.

              Regenerative, electromagnetic brakes provides good performance and reduces wear-out. High quality components to achieve the best operating economy, e.g. lifting motor from Bucher. A travel speed of 8.5 km/h provides efficient and fast transportations. 210 Ah battery enables T20-20RAS to operate a full working day. Even more powerful batteries are available if needed. T20-20RAS is the version with EPS, Electric Powered Steering.

              Perfect for:
              • Warehouses
              • Work shops
              • Trucks
              • Terminals
            • Full-Electric PT, forks 2400 T20-25RA2350

              • Fast (8,5 km/h)
              • Compact design
              • Foldable handles
              • Foldable, chock wave absorbing rider stand
              • 280 Ah industry battery
              • AC drive control
              • Central filling

              Silverstone T20-25RA2350 is a stand-on pallet mover for quick movements of goods. Latest generation AC motor technology ensures good performance and high security.

              Regenerative, electromagnetic brakes provides good performance and reduces wear-out. High quality components to achieve the best operating economy, e.g. lifting motor from Bucher. A travel speed of 8.5 km/h provides efficient and fast transportations. 280 Ah battery enables T20-20RA2350 to operate a full working day. Even more powerful batteries are available if needed.

              Perfect for:
              • Warehouses
              • Work shops
              • Trucks
              • Terminals
            • Electric truck, platform, EPST20-RASS

            • Maintenance-free AC drive motor and powerful vertical
              gearbox for increased durability. Silently hydraulic unit
              with high quality components. Side support for increased
              visibility with forward and backwards driving.
              Foot switch what prevents unintentional use.
              Automatic brake with anti-roll function for higher safety
              if the truck is left on uneven ground or slope.
              Unique suspension system DFA (Driving Floating System)
              which ensures high stability at high speeds. Battery
              access on the side for easy maintenance and battery
              replacement .Power steering for increased comfort
              • Protected driving environment
              • Power steering
              • High speed (12km/h)
              • 280 Ah truck battery
              • Ac-drive motor
              • Central Battery filling system (Bfs)


               
            • Electric truck, platform, EPS, litium T20-RPL201H

            • Silverstone RPL-201Li is a stand-on pallet mover for
              quick movements of goods. Latest generation AC
              motor technology ensures good performance and
              high security.
              Regenerative, electromagnetic brakes provides good
              performance and reduces wear-out. High quality
              components to achieve the best operating economy,
              e.g. drive motor from Bucher. A travel speed of 12
              km/h provides efficient and fast transportations. 210
              Ah battery enables RPL-201Li to operate a full working
              day. Even more powerful batteries are available if
              needed.
              • Power steering
              • Fast (12km/h)
              • Compact & foldable handles
              • Foldable, absorbing rider stand
              • 210 Lithium battery
              • Ac drive control


               
          • High Lifters

              • High Lifter, 520x1150 S1000

              • Manual pump

                Has a telescopic 2-stage lifting cylinder. Automatic quick lift function up to 150 kg loads, double lifting speed. This model is also available with 1500 mm forks: S1000-15

                • Manual pump.
                • Polyurethane tyres.

                Technical Data:
                • Capacity (kg) 1000
                • Weight (kg) 115
                • Fork height (min/max) 800
                • Lift height 85-800 mm (min-max)
                • Lifting speed (mm/stroke) 18 / 40
              • High Lifter,520x1500 S1000-1500

              • Manual pump

                Has a telescopic 2-stage lifting cylinder. Automatic quick lift function up to 150 kg loads, double lifting speed.

                • Manual pump.
                • Polyurethane tyres.

                Technical Data:
                • Capacity (kg) 1000
                • Fork dimensions B160 x L1500
                • Outer fork width 520
                • Weight (kg) 135
                • Fork height (min/max) 85-800 mm
                • Lift height 800 mm
                • Lifting speed (mm/stroke) 18 / 40
              • EL High-lifter, PU/PU SE1056

              • Electric pump

                Compact and easy to operate. Built in charger, with the largest battery as standard (60Ah/12V). Gives many working hours per charging. SE1056 lifts and lowers forks very quickly.
                • Electric pump.
                • Polyurethane tyres.

                Technical Data:
                • Capacity (kg) 1000
                • Weight (kg) 150
                • Fork height (min/max) 85-800 mm
                • Lift height 85-800 mm (min-max)
                • Lifting speed (mm/sec) 42 / 73
              • High-Lifter, INOX Nylon/Nylon SLP10-INOX

                • Stainless steel
                • Maintenance free
                • Manual pump

                Maintenance free high-lifter with a capacity of 1000 kg. Has a telescopic 2-stage lifting cylinder. Automatic quick lift function up to 150 kg loads, double lifting speed. Manual pump. Nylon tyres.
            • Light Lifters, Manual Stackers, Electric Stackers, Order Pickers, Forklifts

                • Light Lifters

                    • Electric Light Lifter, 100kg E100

                    • Very flexible and easy-to-operate electric light lifter.

                      Capacity 100 kg.
                      Designed to reviel back, neck and shoulders from all types of lifting work from floor level up to head level. Lift/lowering system with electrical motor, chain drive, electronic regulation of lift/lowering incl.soft start/stop, electric overload protection, portable and adjustable hand control unit, maintenance free/sealed battery, automatic built-in battery charger, hand control cable and charger cable. Standard support legs are 105 mm high.
                      Platform is made of polypropylene (PP).
                      Size of platform (LxWxT): 480x600x15 mm

                      Also available with low profile legs (85 mm).

                      There are demands from the Work Environment Authorities and the EC-directives when it comes to rules for lifting. Also very light lifting or wrong working positions can expose body for injuries.
                    • Hand Winch Lifter, 100kg M100

                    • With platform.

                      Capacity 100 kg.

                      Operated by a manual hand winch and a
                      steel wire which gives an accurate and
                      fast lift/lowering function. The automatic
                      brake system ensures a safe lowering. 4
                      castor wheels. Roll attachment options
                      available.

                      Platform size (LxW): 480x600 mm
                    • Hand Winch Stacker, 120kg PM120

                    • With forks.

                      Capacity 120 kg.

                      The winch stacker has a very low weight compared to the rated lift capacity, therefore it is very handy and easy-to-use for the operator. It is equipped with adjustable forks for half size pallets, hand winch for lifting and lowering. Large sized rubber rear wheels and small front PU castor wheels, hand controlled brake.

                      Adjustable width: 345-485 mm
                    • Electric Light Lifter, 80kg E80

                    • Very flexible and easy-to-operate electric light lifter.

                      Capacity 80 kg.

                      Designed to reviel back, neck and shoulders from all types of lifting work from floor level up to head level. Lift/lowering system with electrical motor, chain drive, electronic regulation of lift/lowering incl.soft start/stop, electric overload protection, portable and adjustable hand control unit, maintenance free/sealed battery, automatic built-in battery charger, hand control cable and charger cable. Standard support legs are 105 mm high.
                      Platform is made of polypropylene (PP).
                      Size of platform (LxWxT): 480x600x15 mm

                      Also available with low profile legs (85 mm).
                    • Hand Winch Lifter, 200kg M200

                    • With platform.
                      Capacity 200 kg.


                      Operated by a manual hand winch and a
                      steel wire which gives an accurate and
                      fast lift/lowering function. The automatic
                      brake system ensures a safe lowering. 4
                      castor wheels. Roll attachment options
                      available.

                      Platform size (LxW): 480x600 mm
                    • Electric Light Lifter, 150kg E150

                    • Very flexible and easy-to-operate electric light lifter.

                      Capacity 150 kg.

                      Designed to reviel back, neck and shoulders from all types of lifting work from floor level up to head level. Lift/lowering system with electrical motor, chain drive, electronic regulation of lift/lowering incl.soft start/stop, electric overload protection, portable and adjustable hand control unit, maintenance free/sealed battery, automatic built-in battery charger, hand control cable and charger cable. Standard support legs are 105 mm high.
                      Platform is made of polypropylene (PP).
                      Size of platform (LxWxT): 480x600x15 mm

                      Also available with low profile legs (85 mm).
                  • Manual Stackers

                      • Manuell Staplare, LH 1600mm, Kap 1000kg -Gul EB-1016

                      • Manual stacker
                        Capacity 1000 kg
                        Max. lifting height 1600 mm

                        Manual stacker with 1-stage lifting mast. Lifting speed 12 mm/stroke.

                        Capacity 1000 kg.

                        Technical Data:
                        • Capacity (kg) 1000
                        • Weight (kg) 224
                        • Load wheels Ø180x50 mm
                        • Load wheels Ø80x58 mm
                        • Fork height (min/max) 85/1600 mm
                        • Lift height Max 1600 mm
                        • Outer dimensions 1600x760x2030 mm


                         
                      • Manual Stacker, 1000mm EB-1010

                      • EB-Stackers has a welded and strengthened chassis for heavy loads. 1-stage or 2-stage lifting Masts made of C-section profiles, dual chains and single lifting cylinder, fork carriage and wheels.
                        • Capacity 1000kg
                        • Lifting height 85-2500mm
                        • Foot/hand pump
                      • Manuell Staplare, LH 2500mm, Kap 1000kg -Gul EB-1025

                        • Manual stacker
                        • Capacity 1000 kg
                        • Max. lifting height 2500 mm

                        Manual stacker with 2-stage lifting mast. Lifting speed 8 mm/stroke.
                        Capacity 1000 kg.

                        Technical Data:
                        • Capacity (kg) 1000
                        • Weight (kg) 310
                        • Load wheels Ø180x50 mm
                        • Load wheels Ø74x70 mm
                        • Fork height (min/max) 85/2500 mm
                        • Lift height Max 2500 mm
                        • Outer dimensions 1600x760x1840


                         
                      • "ECO" Manual Stacker, LH=1100 ES1011

                      • Easy to pump
                        Unique Quick lift system
                        Quick lift 45 mm/stroke


                        This stacker has a welded and reinforced chassis for heavy loads, 2-stage lifting masts made of C-section profiles, dual chains and single lifting cylinder, fork carriage and wheels. Sealed hydraulic system with protected pump and built-in overload valve. This gives a long and trouble free lifetime. It has a unique, very easy to pump quick lifting system which lifts 45 mm/stroke when in quick position. The stacker applies to EN1757.

                        Free lift.

                        Nylon wheels, roller bearings (RS), parking brake and foot protection on all wheels.

                        Technical Data:
                        • Capacity (kg) 1000
                        • Weight (kg) 215
                        • Steering wheels Ø150x40 mm
                        • Load wheels Ø80x70 mm
                        • Load center 585 mm
                        • Lift height 88-1100 mm (min-max)
                        • Turning radius 1360 mm
                        • Lifting speed (mm/stroke) 45-12,5
                        • Outer dimensions 1605x840x1590


                         
                      • "ECO" Manual Stacker, LH=1500 ES1015

                      • Easy to pump
                        Unique Quick lift system
                        Quick lift 45 mm/stroke


                        This stacker has a welded and reinforced chassis for heavy loads, 2-stage lifting masts made of C-section profiles, dual chains and single lifting cylinder, fork carriage and wheels. Sealed hydraulic system with protected pump and built-in overload valve. This gives a long and trouble free lifetime. It has a unique, very easy to pump quick lifting system which lifts 45 mm/stroke when in quick position. The stacker applies to EN1757.

                        Nylon wheels, roller bearings (RS), parking brake and foot protection on all wheels.

                        Technical Data:
                        • Capacity (kg) 1000
                        • Weight (kg) 220
                        • Steering wheels Ø150x40 mm
                        • Load wheels Ø70x70 mm
                        • Load center 585 mm
                        • Lift height 88-1500 mm (min-max)
                        • Turning radius 1360 mm
                        • Lifting speed (m/sec) 45-12,5
                        • Lifting speed (mm/stroke) 45-12,5
                        • Outer dimensions 1605x840x1970
                      • "ECO" Manual Stacker, LH=2500 ES1025

                      • Easy to pump
                        Unique Quick lift system
                        Quick lift 45 mm/stroke


                        This stacker has a welded and reinforced chassis for heavy loads, 2-stage lifting masts made of C-section profiles, dual chains and single lifting cylinder, fork carriage and wheels. Sealed hydraulic system with protected pump and built-in overload valve. This gives a long and trouble free lifetime. It has a unique, very easy to pump quick lifting system which lifts 45 mm/stroke when in quick position. The stacker applies to EN1757.

                        Nylon wheels, roller bearings (RS), parking brake and foot protection on all wheels.

                        Technical Data:
                        • Capacity (kg) 1000
                        • Weight (kg) 330
                        • Steering wheels Ø150x40 mm
                        • Load wheels Ø80x70 mm
                        • Load center 585 mm
                        • Lift height 88-2500 mm (min-max)
                        • Turning radius 1360 mm
                        • Lifting speed (mm/stroke) 45-12,5
                        • Outer dimensions 1605x840x1970




                         
                      • Hand stacker, LH=2885 ES1029

                      • Hand stacker, LH=2885
                        ES1029
                        Easy to pump
                        Unique Quick lift system
                        Quick lift 45 mm/stroke


                        This stacker has a welded and reinforced chassis for heavy loads, 2-stage lifting masts made of C-section profiles, dual chains and single lifting cylinder, fork carriage and wheels. Sealed hydraulic system with protected pump and built-in overload valve. This gives a long and trouble free lifetime. It has a unique, very easy to pump quick lifting system which lifts 45 mm/stroke when in quick position. The stacker applies to EN1757.

                        Nylon wheels, roller bearings (RS), parking brake and foot protection on all wheels.

                        Technical Data:
                        • Capacity (kg) 1000
                        • Fork dimensions 1150x160x50
                        • Outer fork width 550
                        • Weight (kg) 370
                        • Steering wheels Ø150x55
                        • Load wheels Ø80x75(Boggie)
                        • Load center 600
                        • Lift height 88-2900 (min-max)
                        • Height, mast extended 3443
                        • Turning radius 1360
                        • Lifting speed (mm/stroke) Normal 12,5/Snabb 45
                        • Outer dimensions 1670x860x2035
                    • Electric Stackers

                        • Elektrisk staplare, LH 1600 mm, Kap 1000kg EMS-1016

                          • Semi-electric
                          • 1000 kg
                          • Ergonomically shaped handle
                          • Lifting height 1600 mm

                          Semi-electric stacker suited for intensive handling and continuous lifting.
                          Compact design ensures a small turning radius. Fast lifting/lowering speeds.
                          Easy and smooth steering makes the stacker safe and easy to operate.

                          Service-friendly assembly of hydraulics, electrics and batteries.

                          Large battery, 150Ah/12V, for many working hours per charging.

                          The perfect choice for high productivity requirements in confined spaces.

                          Technical Data:
                          • Capacity (kg) 1000
                          • Fork dimensions 1150x160
                          • Weight (kg) 350
                          • Load center 500 mm
                          • Total length 1660 mm
                          • Total width 800 mm
                          • Height, mast lowered 2060 mm
                          • Lift height 1600 mm
                          • Height, mast extended 2060 mm
                          • Drive motor rating S2 60 min/ lift motor rating at S3 15% 12V/1,6KW
                          • Battery 2x12V/70AH
                        • Semi-electric, LH 2700 mm, Kap 1000kg EMS-1027

                          • Semi-electric
                          • 1000 kg
                          • Ergonomically shaped handle
                          • Lifting height 2700 mm

                          Semi-electric stacker suited for intensive handling and continuous lifting.
                          Compact design ensures a small turning radius. Fast lifting/lowering speeds.
                          Easy and smooth steering makes the stacker safe and easy to operate.

                          Service-friendly assembly of hydraulics, electrics and batteries.

                          Large battery, 150Ah/12V, for many working hours per charging.

                          The perfect choice for high productivity requirements in confined spaces.

                          Technical Data:
                          • Capacity (kg) 1000
                          • Fork dimensions 1150x160x50
                          • Outer fork width 540
                          • Weight (kg) 460
                          • Steering wheels Ø180x50
                          • Load wheels Ø74x70
                          • Load center 600
                          • Lift height 85-2700
                          • Height, mast extended 3060
                          • Turning radius 1350
                          • Lifting speed (m/sec) 80/130
                          • Lowering speed 400 - 190
                          • Drive motor rating S2 60 min/ lift motor rating at S3 15% 1,6
                          • Outer dimensions 1660x800x1920
                        • Elektrisk staplare, LH 3500 mm, Kap 1000kg EMS-1035

                          • Semi-electric
                          • 1000 kg
                          • Ergonomically shaped handle
                          • Lifting height 3500 mm

                          Semi-electric stacker suited for intensive handling and continuous lifting.
                          Compact design ensures a small turning radius. Fast lifting/lowering speeds.
                          Easy and smooth steering makes the stacker safe and easy to operate.

                          Service-friendly assembly of hydraulics, electrics and batteries.

                          Large battery, 150Ah/12V, for many working hours per charging.

                          The perfect choice for high productivity requirements in confined spaces.

                          Technical Data:
                          • Capacity (kg) 1000
                          • Fork dimensions 1150x160
                          • Weight (kg) 500
                          • Load center 500 mm
                          • Total length 1660 mm
                          • Total width 800 mm
                          • Height, mast lowered 2330 mm
                          • Lift height 3500 mm
                          • Height, mast extended 4060 mm
                          • Drive motor rating S2 60 min/ lift motor rating at S3 15% 12V/1,6KW
                          • Battery 2x12V/70AH






                           
                        • Electric Stacker, Initial lift ES08-1600WAI

                          • Electric stacker with initial lift
                          • INITIAL LIFT
                          • LONG STEERING ARM FACILITATES maneuverability
                          • COMPACT DESIGN
                          • BUILT-IN CHARGER (220V)
                          • MAINTENANCE FREE BATTERIES (224AH)

                          Compact walkie stacker, perfect for order picking, transportation and stacking up to 1600 mm height. The mono mast gives the worker a good sight over the load and forks. An ergonomic steering arm with easily accessible controls facilitates handling. The stacker is equipped with a rubber steering wheel which results in a good grip. The compact design makes the stacker optimal for trucks and in narrow warehouses.

                          Suits perfectly for:
                          • Trucks
                          • Warehouses
                          • Shops
                          • Small scale industries

                           
                        • Electric Stacker, 1650mm, Initialift ES12-1650i

                        • Excellent stacker for smaller warehouses or stores.
                          Compact and manoeuvrable pedestrian stacker with initial lift for handling two pallets simultaneously or driving on uneven surfaces. Mono mast gives good visibility when driving.
                           
                        • Full-Electric Stacker, EPS, Prop. Valve ES16RS-5000

                          • Cost effective stacker with the latest technology.
                          • With EPS and proportional valve
                          • Lifting height up to 5 m
                          • ZAPI steering system and Bucher lift motor

                          Silverstone stacker with power steering and proportional valve as standard. The stacker is equipped with proven technology including lift motor from Bucher and Zapi steering system. The focus is on comfort and economy where PV valve allows precision when lowering the load and where the power steering ensures that you have energy throughout the day.

                          Perfect for large warehouses and industries.
                        • Full-Electric Stacker, EPS, Initial Prop. Valve ES16RSI-4500

                          • Initial lift
                          • EPS
                          • Zapi steering system
                          • Proportional valve

                          Silverstone stacker with power steering and proportional valve as standard. The stacker is equipped with proven technology including lift motor from Bucher and Zapi steering system. The focus is on comfort and economy where PV valve allows precision when lowering the load and where the power steering ensures that you have energy throughout the day.

                          Lifting height: 4500
                        • Full-Electric Stacker, EPS, Initial Prop. Valve ES16RSI-5000

                          • Initial lift
                          • EPS
                          • Zapi steering system
                          • Proportional valve

                          Silverstone stacker with power steering and proportional valve as standard. The stacker is equipped with proven technology including lift motor from Bucher and Zapi steering system. The focus is on comfort and economy where PV valve allows precision when lowering the load and where the power steering ensures that you have energy throughout the day.

                          Lifting height: 5000
                        • El.-ministacker,LH=1500 ST400-1500-EL

                          • Electric stacker.
                          • Capacity 400 kg.
                          • Max. lifting height 1500 mm.

                          Electric stacker with battery 74Ah/12V, built-in charger, electric motor (DC) and pump for more ergonomic operation. Overload valve for overload protection, maintenance free bushings and bearings (RS). Rear castor wheels (PU) with foot brake.

                          Platform size (LxW): 650x580 mm
                          Inner measure between supporting legs: 370 mm
                          Inner dimension between forks: 350 mm
                          Measure from floor to upper part of supporting leg: 75 mm
                      • Order Pickers

                          • Order Picker 1200mm CK-05-4200

                          • ORDER PICKING AT HIGH HEIGHTS
                            Silverstone CK-05 solves many of the high altitude problems and tasks that you may face when working in industry, warehouse and retail shops. Order picking up to 5 m is no problem.

                            CK-O5 is simple and easy to maneuver thanks to the electric steering and well-designed controls. CK-05 only needs 1,8 meter wide aisle to make a U-turn.

                            Maintenance work on high levels often means bulky and wobbly ladders in action and yet stability and space is limited. With Silverstone CK-05 you drive around smoothly and easily with space for both materials and tools on board. Do you need to move around the properties while towing one or many carts? No problem, CK-05 solves this task with elegance and safe. CK-05 is equipped with non-marking polyurethane wheels.

                            • Capacity 450kg
                            • Working height approx. 6m
                            • Compact design
                          • Order picker, 2620mm CK22-2620

                          • High quality oder picker.
                            • Working height up to 6 m
                            • Compact and easy to navigate
                            • 1358 mm turning radius
                            • AC drive control
                            • Maintenance free battery

                            CK-05-4200 is the big brother of CK-05. Same functions and features, but with a maximal lifting height of 4,9 m and a working height of up to 6 m.

                            CK-05-4200 solves many of the high altitude problems and tasks that you may face when working in industry, warehouse and retail shops. It is easy to maneuver thanks to the electric steering and well-designed controls. CK-05-4200 only needs 1,8 meter wide aisle to make a U-turn.

                            Maintenance work on high levels often means bulky and wobbly ladders in action and yet stability and space is limited. With CK-05-4200 you drive around smoothly and easily with space for both materials and tools on board. Do you need to move around the properties while towing one or many carts? No problem, CK-05-4200 solves this task with elegance and safe. The machine is equipped with non-marking polyurethane wheels.

                            Perfect for:
                            • Retail trade
                            • Warehouses
                          • Order Picker JXO

                          • With a working height of up to 5 m, the JXO is an alternative to ladders that are used today in stores, maintenance work or when picking. Only 750mm wide, the JXO is suitable for driving in narrow spaces and corridors. The load surface can be raised and lowered (electrically), which gives a good visibility while driving as well as an ergonomic working position.
                            • Capacity 336kg
                            • Working height up to 5 meters
                            • Build in charger (230V)
                        • Static Lift Tables, Mobile Lift Tables

                            • Static Lift Tables

                                • Lift-table, 1300x820 mm, 1000 kg HD1000

                                  • Vertical double scissor.
                                  • Capacity: 1000 kg
                                  • Table area: 1300x820 mm

                                  Tables for high lifts and long goods. Table should be fixed into floor with bolted joints. Lifting height up to 4210 mm. Maintenance free pivot bushings. Large safety clearance between the scissors to avoid injuries. Lift cylinder with internal drainage. Safety valve to ensure safety in case of a hose burst. Low-noise power pack with built-in overload valve. Safety switch in top position. Moveable limit switch for adjusting full raised stop. 4 end-stops, incl. 4 loops which can be used e.g. when lifting total lift table into a pit. Low-noise power pack with built in overload valve. Cable for 3-phase connection 380V/16 Ah. Approves to EN1570-1.
                                • Lift-table, 1700x1000 mm, 1000 kg HT1000

                                  • Vertical triple scissor.
                                  • Capacity: 1000 kg
                                  • Table area: 1700x1000 mm

                                  Tables for high lifts and long goods. Table should be fixed into floor with bolted joints. Lifting height up to 3000 mm. Maintenance free pivot bushings. Large safety clearance between the scissors to avoid injuries. Lift cylinder with internal drainage. Safety valve to ensure safety in case of a hose burst. Low-noise power pack with built-in overload valve. Safety switch in top position. Moveable limit switch for adjusting full raised stop. 4 end-stops, incl. 4 loops which can be used e.g. when lifting total lift table into a pit. Low-noise power pack with built in overload valve. Cable for 3-phase connection 380V/16 Ah. Approves to EN1570-1.
                                • Lift-table, 1700x1000 mm, 1000 kg HW1004

                                • Static lift table.

                                  Capacity: 1000 kg
                                  Table area (LxW): 1700x1000 mm

                                  Maintenance free pivot bushings. Large safety clearance between the scissors to avoid injuries. Lift cylinder with internal drainage. Safety valve to ensure safety in case of a hose burst. Moveable limit switch for adjusting full raised stop. 4 end-stops, incl. 4 loops which can be used e.g. when lifting total lift table into a pit. Low-noise power pack with built-in overload valve. Cable for 3-phase 380V/16Ah. *

                                  Approves to EN1570-1.

                                  1 or 2 cylinders = 1000 or 2000/4000 kg.

                                  Low-noise power pack equipped with built-in overload valve and flow compensated valve for
                                  controlled lowering speed.

                                  The upper platform has a safety frame that covers all four sides. There are double switches for lowering safety of the platform.

                                  Mechanic stop enables safe maintenance.

                                  *Option: 3 phase 230V/50HZ.
                                • Lift-table, 2000x850 mm, 1000 kg HW1005

                                • Static lift table.

                                  Capacity: 1000 kg
                                  Table area (LxW): 2000x850 mm


                                  Maintenance free pivot bushings. Large safety clearance between the scissors to avoid injuries. Lift cylinder with internal drainage. Safety valve to ensure safety in case of a hose burst. Moveable limit switch for adjusting full raised stop. 4 end-stops, incl. 4 loops which can be used e.g. when lifting total lift table into a pit. Low-noise power pack with built-in overload valve. Cable for 3-phase 380V/16Ah. *

                                  Approves to EN1570-1.

                                  1 or 2 cylinders = 1000 or 2000/4000 kg.

                                  Low-noise power pack equipped with built-in overload valve and flow compensated valve for
                                  controlled lowering speed.

                                  The upper platform has a safety frame that covers all four sides. There are double switches for lowering safety of the platform.

                                  Mechanic stop enables safe maintenance.

                                  *Option: 3 phase 230V/50HZ.
                                • Lift-table, 2000x1000 mm, 1000 kg HW1006

                                • Static lift table.

                                  Capacity: 1000 kg
                                  Table area (LxW): 2000x1000 mm


                                  Maintenance free pivot bushings. Large safety clearance between the scissors to avoid injuries. Lift cylinder with internal drainage. Safety valve to ensure safety in case of a hose burst. Moveable limit switch for adjusting full raised stop. 4 end-stops, incl. 4 loops which can be used e.g. when lifting total lift table into a pit. Low-noise power pack with built-in overload valve. Cable for 3-phase 380V/16Ah. *

                                  Approves to EN1570-1.

                                  1 or 2 cylinders = 1000 or 2000/4000 kg.

                                  Low-noise power pack equipped with built-in overload valve and flow compensated valve for
                                  controlled lowering speed.

                                  The upper platform has a safety frame that covers all four sides. There are double switches for lowering safety of the platform.

                                  Mechanic stop enables safe maintenance.


                                  *Option: 3 phase 230V/50HZ.
                                • Lift-table, 1300x850 mm, 2000 kg HD2000

                                • Vertical double scissor.

                                  • Capacity: 2000 kg
                                  • Table area: 1300x850 mm

                                  Tables for high lifts and long goods. Table should be fixed into floor with bolted joints. Lifting height up to 4210 mm. Maintenance free pivot bushings. Large safety clearance between the scissors to avoid injuries. Lift cylinder with internal drainage. Safety valve to ensure safety in case of a hose burst. Low-noise power pack with built-in overload valve. Safety switch in top position. Moveable limit switch for adjusting full raised stop. 4 end-stops, incl. 4 loops which can be used e.g. when lifting total lift table into a pit. Low-noise power pack with built in overload valve. Cable for 3-phase connection 380V/16 Ah. Approves to EN1570-1.
                                • Lift-table, 1600x1000 mm, 1000 kg HW1002

                                • Static lift table.

                                  • Capacity: 1000 kg
                                  • Table area (LxW): 1600x1000 mm

                                  Maintenance free pivot bushings. Large safety clearance between the scissors to avoid injuries. Lift cylinder with internal drainage. Safety valve to ensure safety in case of a hose burst. Moveable limit switch for adjusting full raised stop. 4 end-stops, incl. 4 loops which can be used e.g. when lifting total lift table into a pit. Low-noise power pack with built-in overload valve. Cable for 3-phase 380V/16Ah. *

                                  Approves to EN1570-1.

                                  1 or 2 cylinders = 1000 or 2000/4000 kg.

                                  Low-noise power pack equipped with built-in overload valve and flow compensated valve for
                                  controlled lowering speed.

                                  The upper platform has a safety frame that covers all four sides. There are double switches for lowering safety of the platform.

                                  Mechanic stop enables safe maintenance.


                                  *Option: 3 phase 230V/50HZ.
                                • Lift-table, 1300x850 mm, 2000 kg HW2001

                                • Static lift table.

                                  • Capacity: 2000 kg
                                  • Table area (LxW): 1300x850 mm

                                  Maintenance free pivot bushings. Large safety clearance between the scissors to avoid injuries. Lift cylinder with internal drainage. Safety valve to ensure safety in case of a hose burst. Moveable limit switch for adjusting full raised stop. 4 end-stops, incl. 4 loops which can be used e.g. when lifting total lift table into a pit. Low-noise power pack with built-in overload valve. Cable for 3-phase 380V/16Ah. *

                                  Approves to EN1570-1.

                                  1 or 2 cylinders = 1000 or 2000/4000 kg.

                                  Low-noise power pack equipped with built-in overload valve and flow compensated valve for
                                  controlled lowering speed.

                                  The upper platform has a safety frame that covers all four sides. There are double switches for lowering safety of the platform.

                                  Mechanic stop enables safe maintenance.

                                  *Option: 3 phase 230V/50HZ.
                                • Lift-table, 1600x1000 mm, 2000 kg HW2002

                                • Static lift table.

                                  • Capacity: 2000 kg
                                  • Table area (LxW): 1600x850 mm

                                  Maintenance free pivot bushings. Large safety clearance between the scissors to avoid injuries. Lift cylinder with internal drainage. Safety valve to ensure safety in case of a hose burst. Moveable limit switch for adjusting full raised stop. 4 end-stops, incl. 4 loops which can be used e.g. when lifting total lift table into a pit. Low-noise power pack with built-in overload valve. Cable for 3-phase 380V/16Ah. *

                                  Approves to EN1570-1.

                                  1 or 2 cylinders = 1000 or 2000/4000 kg.

                                  Low-noise power pack equipped with built-in overload valve and flow compensated valve for
                                  controlled lowering speed.

                                  The upper platform has a safety frame that covers all four sides. There are double switches for lowering safety of the platform.

                                  Mechanic stop enables safe maintenance.

                                  *Option: 3 phase 230V/50HZ.
                                • Lift-table, 2000x850 mm, 2000 kg HW2005

                                • Static lift table.

                                  • Capacity: 2000 kg
                                  • Table area (LxW): 2000x850 mm

                                  Maintenance free pivot bushings. Large safety clearance between the scissors to avoid injuries. Lift cylinder with internal drainage. Safety valve to ensure safety in case of a hose burst. Moveable limit switch for adjusting full raised stop. 4 end-stops, incl. 4 loops which can be used e.g. when lifting total lift table into a pit. Low-noise power pack with built-in overload valve. Cable for 3-phase 380V/16Ah. *

                                  Approves to EN1570-1.

                                  1 or 2 cylinders = 1000 or 2000/4000 kg.

                                  Low-noise power pack equipped with built-in overload valve and flow compensated valve for
                                  controlled lowering speed.

                                  The upper platform has a safety frame that covers all four sides. There are double switches for lowering safety of the platform.

                                  Mechanic stop enables safe maintenance.

                                  *Option: 3 phase 230V/50HZ.
                                • Lift-table, 2000x1200 mm, 4000 kg HW4002

                                • Static lift table.

                                  • Capacity: 4000 kg
                                  • Table area (LxW): 2000x1200 mm

                                  Maintenance free pivot bushings. Large safety clearance between the scissors to avoid injuries. Lift cylinder with internal drainage. Safety valve to ensure safety in case of a hose burst. Moveable limit switch for adjusting full raised stop. 4 end-stops, incl. 4 loops which can be used e.g. when lifting total lift table into a pit. Low-noise power pack with built-in overload valve. Cable for 3-phase 380V/16Ah. *

                                  Approves to EN1570-1.

                                  1 or 2 cylinders = 1000 or 2000/4000 kg.

                                  Low-noise power pack equipped with built-in overload valve and flow compensated valve for
                                  controlled lowering speed.

                                  The upper platform has a safety frame that covers all four sides. There are double switches for lowering safety of the platform.

                                  Mechanic stop enables safe maintenance.

                                  *Option: 3 phase 230V/50HZ.
                                • Lift-table, 2000x800 mm, 500 kg HW500L

                                • Static lift table.

                                  • Capacity: 500 kg
                                  • Table area (LxW): 2000x800 mm

                                  Maintenance free pivot bushings. Large safety clearance between the scissors to avoid injuries. Lift cylinder with internal drainage. Safety valve to ensure safety in case of a hose burst. Low-noise power pack with built in overload valve. Cable for 3-phase 380V/16Ah. * Approves to EN1570-1.

                                  1 or 2 cylinders = 1000 or 2000/4000 kg.

                                  Low-noise power pack equipped with built-in overload valve and flow compensated valve for
                                  controlled lowering speed.

                                  The upper platform has a safety frame that covers all four sides. There are double switches for lowering safety of the platform.

                                  Mechanic stop enables safe maintenance.

                                  *Option: 3 phase 230V/50HZ.
                                • Lift-table, 1200x800 mm, 500 kg HW502-Y

                                • Static lift table.

                                  • Table are (LxW): 1200x800 mm

                                  Maintenance free pivot bushings. Large safety clearance between the scissors to avoid injuries. Lift cylinder with internal drainage. Safety valve to ensure safety in case of a hose burst. Low-noise power pack with built-in overload valve. Cable for 3-phase 380V/16Ah.* Approves to EN1570-1.

                                  *Option: 3 phase 230V/50HZ

                                  There are demands from the Work Environment Authorities and the EC-directives when it comes to rules for lifting. Also very light lifting or wrong working positions can expose body for injuries.
                                • Lift-table, 850x2500, 4000 kg LV4000

                                • Horisontal double scissor lift, 4000 kg capacity.
                                  Table for high lifts and long goods. The table should be fixed into floor with bolted joints. Lifting height up to 1000 mm. Maintenance free pivot bushings. Large safety clearance between the scissors to avoid injuries. Lift cylinder with internal drainage. Safety valve to ensure safety in case of a hose burst. Low-noise power pack with built-in overload valve. Safety switch in top position. Moveable limit switch for adjusting full raised stop. 4 end-stops, incl. 4 loops which can be used e.g. when lifting total lift table into a pit. Low-noise power pack with built in overload valve. Cable for 3-phase connection 380V/16 Ah. Approves to EN1570-1.
                                • Lift-table, 1300x820 mm, 1000 kg HW1001

                                  • Static lift table.
                                  • Capacity: 1000 kg
                                  • Table area (LxW): 1300x820 mm

                                  Maintenance free pivot bushings. Large safety clearance between the scissors to avoid injuries. Lift cylinder with internal drainage. Safety valve to ensure safety in case of a hose burst. Moveable limit switch for adjusting full raised stop. 4 end-stops, incl. 4 loops which can be used e.g. when lifting total lift table into a pit. Low-noise power pack with built-in overload valve. Cable for 3-phase 380V/16Ah. *

                                  Approves to EN1570-1.

                                  • 1 or 2 cylinders = 1000 or 2000/4000 kg.
                                  • Low-noise power pack equipped with built-in overload valve and flow compensated valve for
                                  • controlled lowering speed.
                                  • The upper platform has a safety frame that covers all four sides. There are double switches for lowering safety of the platform.
                                  • Mechanic stop enables safe maintenance.


                                  *Option: 3 phase 230V/50HZ.
                                • Lift-table, 1200x800 mm, 1000 kg

                                • HW1012-Y

                                  • Static lift table.
                                  • Table are (LxW): 1200x800 mm

                                  Maintenance free pivot bushings. Large safety clearance between the scissors to avoid injuries. Lift cylinder with internal drainage. Safety valve to ensure safety in case of a hose burst. Low-noise power pack with built-in overload valve. Cable for 3-phase 380V/16Ah.* Approves to EN1570-1.

                                  *Option: 3 phase 230V/50HZ

                                  There are demands from the Work Environment Authorities and the EC-directives when it comes to rules for lifting. Also very light lifting or wrong working positions can expose body for injuries.
                                • Lift-table, 1700x1000 mm, 800 kg MJ-Q801

                                  • Vertical four scissor.
                                  • Capacity: 800 kg
                                  • Table area: 1700x1000 mm

                                  Tables for high lifts and long goods. Table should be fixed into floor with bolted joints. Lifting height up to 4210 mm. Maintenance free pivot bushings. Large safety clearance between the scissors to avoid injuries. Lift cylinder with internal drainage. Safety valve to ensure safety in case of a hose burst. Low-noise power pack with built-in overload valve. Safety switch in top position. Moveable limit switch for adjusting full raised stop. 4 end-stops, incl. 4 loops which can be used e.g. when lifting total lift table into a pit. Low-noise power pack with built in overload valve. Cable for 3-phase connection 380V/16 Ah. Approves to EN1570-1.
                                • Low Lift table, 1420x1140 SL1001

                                  • Low profile lift table.
                                  • Capacity: 1000 kg
                                  • Table area: 1450x1140 mm

                                  Static electro-hydraulic lift tables are specially made for installation without a pit. Lowered height is only 85 mm. Built with solid steel plates for highest strength and reliability. Separate hydraulic power pack (IP54) which is positioned next to the lift table. The moveable ramp is included. Cable for 3-phase connection 380V/16 Ah. Confirms to EN1570-1 and ANSI/ASME-norms.

                                  Ramp dimensions: W907xL1140xH85mm.
                                • Low Lift table, 1450 x800 SL1003

                                • Low profile lift table.

                                  Capacity: 1000 kg
                                  Table area: 1450x800 mm


                                  Static electro-hydraulic lift tables are specially made for installation without a pit. Lowered height is only 85 mm. Built with solid steel plates for highest strength and reliability. Separate hydraulic power pack (IP54) which is positioned next to the lift table. The moveable ramp is included. Cable for 3-phase connection 380V/16 Ah. Confirms to EN1570-1 and ANSI/ASME-norms.

                                  Ramp dimensions: W907xL1140xH85mm.
                                • Low Lift table, 1600 x 1000 SL1502

                                • Low profile lift table.

                                  Capacity: 1500 kg
                                  Table area: 1600x1000 mm


                                  Static electro-hydraulic lift tables are specially made for installation without a pit. Lowered height is only 105 mm. Built with solid steel plates for highest strength and reliability. Separate hydraulic power pack (IP54) which is positioned next to the lift table. The moveable ramp is included. Cable for 3-phase connection 380V/16 Ah. Confirms to EN1570-1 and ANSI/ASME-norms.

                                  Ramp dimensions: W907xL1140xH85mm.
                                • "U" Lift table, 1420x1140 mm, 1000 kg SU1001

                                • 1420x1140 mm

                                  The U-shaped lift table is specially made for handling of standard pallets together with a hand pallet truck. No need for a pit or ramp, lowered height is only 85 mm.
                                  Built-up with solid steel plates for highest strength and reliability. Separate hydraulic power pack (IP54) which is positioned
                                  next to the lift table. The moveable ramp is included. Confirms to EN1570.
                                • "U" Lift table, 1600x1180 SU1500

                                • Low profile lift table.
                                  U-form.


                                  Capacity: 1500 kg
                                  Table dimensions: 1600x1180 mm


                                  The U-shaped lift table is specially made
                                  for handling of standard pallets together
                                  with a hand pallet truck. No need for a pit
                                  or ramp, lowered height is only 105 mm.
                                  Built-up with solid steel plates for highest
                                  strength and reliability. Separate hydraulic
                                  power pack (IP54) which is positioned
                                  next to the lift table. The moveable ramp
                                  is included. Confirms to EN1570.

                                  Width between forks/forks: 580/300 mm
                              • Mobile Lift Tables

                                  • Mobile Lift-table, 1010x520 mm, 1000 kg BS100

                                  • Manual lift table.

                                    • Capacity: 1000 kg
                                    • Max. lifting height: 950 mm
                                    • Table area: 1010x520 mm

                                    Lifting with a foot pump and lowering with a handle.
                                    Medium duty design, smooth and easy to operate.
                                    Known for their unbeatable mechanical strength and
                                    reliability. With single and double scissors.
                                    Polyurethane wheels with roller bearing and castor.
                                    Rear wheels are equipped with brakes and wheel guards.
                                  • Man. Lift-table, 1200x800 mm, 500 kg BS50LB

                                  • Mobile, manual lift table.

                                    • Capacity: 500 kg
                                    • Table area: 1200x800 mm

                                    The table platform has EUR-pallet dimensions. The table construction is very robust, but is still very easy to maneuver due to low net weight. This table is famous for its mechanical strength and operation reliability. Manual lifting by foot pump and lowering by handle. Simple and reliable design ensures long lifetime.
                                  • El. M. Lift-table, 1200x800 mm, 1000 kg ES100L

                                  • Mobile, electric lift table.

                                    • Capacity: 1000 kg
                                    • Table area: 1200x800 mm

                                    The table platform has EUR-pallet dimensions. The table construction is very robust, but is still very easy to maneuver due to low net weight. This table is famous for its mechanical strength and operation reliability. Lifting and lowering by a push-button controller, connected to a European power pack (DC/700W). Maintenance free battery which gives many working hours per charging and a long lifetime.
                                  • Mobile lift-table, 700x450 mm, 150 kg BS15

                                  • Manual lift table.

                                    • Capacity: 150 kg
                                    • Max. lifting height: 760 mm
                                    • Table area: 700x450 mm

                                    Lifting with a foot pump and lowering with a handle.
                                    Medium duty design, smooth and easy to operate.
                                    Known for their unbeatable mechanical strength and
                                    reliability. With single and double scissors.

                                    Polyurethane wheels with roller bearing and castor.

                                    Rear wheels are equipped with brakes and wheel guards.

                                    BS15 has a foldable handle. Height 295 mm.
                                  • Mobile Lift-table, 830x500 mm, 250 kg BS25

                                  • Manual lift table.

                                    • Capacity: 250 kg
                                    • Max. lifting height: 910 mm
                                    • Table area: 830x500 mm

                                    Lifting with a foot pump and lowering with a handle.
                                    Medium duty design, smooth and easy to operate.
                                    Known for their unbeatable mechanical strength and
                                    reliability. With single and double scissors.

                                    Polyurethane wheels with roller bearing and castor.

                                    Rear wheels are equipped with brakes and wheel guards.
                                  • Mobile Lift-table, 1010x520 mm, 300 kg BS30D

                                  • Manual lift table.

                                    • Capacity: 300 kg
                                    • Max. lifting height: 1585 mm
                                    • Table area: 1010x520 mm

                                    Lifting with a foot pump and lowering with a handle.
                                    Medium duty design, smooth and easy to operate.
                                    Known for their unbeatable mechanical strength and
                                    reliability. With single and double scissors.

                                    Polyurethane wheels with roller bearing and castor.

                                    Rear wheels are equipped with brakes and wheel guards.
                                  • Mobile Lift-table, 1010x520 mm, 500 kg BS50

                                  • Manual lift table.

                                    • Capacity: 500 kg
                                    • Max. lifting height: 1000 mm
                                    • Table area: 1010x520 mm

                                    Lifting with a foot pump and lowering with a handle.
                                    Medium duty design, smooth and easy to operate.
                                    Known for their unbeatable mechanical strength and
                                    reliability. With single and double scissors.

                                    Polyurethane wheels with roller bearing and castor.

                                    Rear wheels are equipped with brakes and wheel guards.
                                  • Mobile Lift-table, 1010x520 mm, 750 kg BS75

                                  • Manual lift table.

                                    • Capacity: 750 kg
                                    • Max. lifting height: 1000 mm
                                    • Table area: 1010x520 mm

                                    Lifting with a foot pump and lowering with a handle.
                                    Medium duty design, smooth and easy to operate.
                                    Known for their unbeatable mechanical strength and
                                    reliability. With single and double scissors.

                                    Polyurethane wheels with roller bearing and castor.

                                    Rear wheels are equipped with brakes and wheel guards.

                                     
                                  • Mobile Lift-table, 1010x520 mm, 800 kg BS80D

                                  • Manual lift table.

                                    • Capacity: 800 kg
                                    • Max. lifting height: 1410 mm
                                    • Table area: 1010x520 mm

                                    Lifting with a foot pump and lowering with a handle.
                                    Medium duty design, smooth and easy to operate.
                                    Known for their unbeatable mechanical strength and
                                    reliability. With single and double scissors.

                                    Polyurethane wheels with roller bearing and castor.

                                    Rear wheels are equipped with brakes and wheel guards.
                                  • El. Mobile Lift-table, 1010x520 mm, 300 kg ES30D

                                  • Mobile, electric lift table.

                                    • Capacity: 300 kg
                                    • Max. lifting height: 1600 mm
                                    • Table area: 1010x520 mm

                                    Lifting and lowering by a push-button controller, connected to a european power pack (DC/700W). Maintenance free battery which gives many working hours per charging and a long life. Known for their unbeatable mechanical strength and reliability. These tables are used for many types of work. Available in single or double scissors.
                                    Polyurethane wheels with roller bearing and castor.
                                    Rear wheels are equipped with brakes and wheel guards.
                                  • El. Mobile Lift-table, 1010x520 mm, 800 kg ES80D

                                  • Mobile, electric lift table.

                                    • Capacity: 800 kg
                                    • Max. lifting height: 1460 mm
                                    • Table area: 1010x520 mm

                                    Lifting and lowering by a push-button controller, connected to a european power pack (DC/700W). Maintenance free battery which gives many working hours per charging and a long life. Known for their unbeatable mechanical strength and reliability. These tables are used for many types of work. Available in single or double scissors.

                                    Polyurethane wheels with roller bearing and castor.

                                    Rear wheels are equipped with brakes and wheel guards.
                                  • Manual Stainless Lift Table, 1000x800 mm, 175 kg SX-175

                                  • Mobile, manual lift table.

                                    • Stainless.
                                    • Capacity: 175 kg
                                    • Table area: 1000x800 mm

                                    This stainless steel mobile screw lift table is very easy to operate and move. The single scissor is operated manually by a handle, can be used on both sides. Non-marking castor wheels with dual foot brakes. Table platform moves 10 mm up/down at each 360 degrees rotation of the crank handle.
                                • Workshop Cranes, Crane and Fork Equipments, Drum Handling

                                    • Workshop Cranes

                                        • "EU" Crane, 1000kg EC1000

                                        • Crane, for EUR-pallet.

                                          Heavy-duty designed work shop crane. Made with Euro pallet dimensions, 840 mm between support legs. U-shaped support legs. There are 4 reach-out positions and lifting capacities. Turnable hook. Built-in overload protection valve. Overload testing before delivery. Distance between floor and lowest part of support leg, 60 mm.

                                          Dimensions (see drawing)
                                          L1: 1360 mm
                                          L2: 1060 mm
                                          L3: 1295 mm
                                          H1: 155 mm
                                          H2: 470 mm
                                          H3: 705 mm
                                          H4: 2225 mm
                                          H5: 2475 mm
                                          H: 1595 mm

                                          Capacity
                                          Pos. 1: 1000 kg
                                          Pos. 2: 800 kg
                                          Pos. 3: 500 kg
                                          Pos. 4: 300 kg
                                        • Foldable Crane, 500kg FC500

                                        • Foldable V-crane.

                                          Have an unique technology, with a quick lift and double action pump,
                                          Very fine speed adjustment when lowering. High lift capacity in all positions. Operating handle and cylinder with 360 degree swivel. Heavy duty design work shop crane in three capacity models. V-shaped support legs. Overload testing before delivery. Distance between floor and lowest part of support leg: 60 mm

                                          Dimensions (see drawing)
                                          A: 1410 mm
                                          B: 165 mm
                                          C: 1510 mm
                                          D: 895 mm
                                          E: 102 mm
                                          F: 2120 mm
                                          G: 1960 mm
                                          H: 150 mm

                                          I: 340 mm

                                          Capacity (kg)
                                          Pos. 1: 500
                                          Pos. 2: 425
                                          Pos. 3: 350
                                      • Crane and Fork Equipment’s

                                          • Fork telescopic jib, 3000kg AR-E30

                                          • Telescopic fork.

                                            • Capacity: 596-3000 kg

                                            Useful fork truck crane for heavy loads
                                            where it normally is hard to reach. The
                                            crane is adjustable in height up to 40
                                            degrees and reaches 3726 mm at most.



                                             
                                          • Crane Scale, 3000 kg CW30

                                          • Compact crane scale.

                                            • Capacity: 20-3000 kg

                                            A compact measuring device for weighing loads during lifting. Tara functions to show either gross or net loads. Remote maneuvered. Suits very well with our fork hook, MK25. Measuring range is 20-3000 kg and indexing accuracy is 1 kg. Net weight is 15 kg.

                                            • Capacity (kg) 20-3000
                                            • Weight (kg) 15
                                          • Crane Fork, 3000kg CY15

                                          • Robust crane fork.

                                            • Work load limit 1500 kg
                                            • Self-balancing head

                                            This Crane Fork has a very handy and robust construction
                                            which can be operated easily without slings or chains.
                                            CY-series, with its self-balancing head, let crane operator
                                            stay in cabin, no need to step out of lorry/crane to make
                                            adjustments. To achieve best performance goods should
                                            weigh 20% of total crane capacity. Width of forks is
                                            adjustable and the crane tower is also adjustable in height.
                                            CK-series is the manual balancing version.
                                          • Crane Fork, 3000kg CY30

                                          • Robust crane fork.

                                            • Work load limit 3000 kg
                                            • Self-balancing head

                                            This Crane Fork has a very handy and robust construction
                                            which can be operated easily without slings or chains.
                                            CY-series, with its self-balancing head, let crane operator
                                            stay in cabin, no need to step out of lorry/crane to make
                                            adjustments. To achieve best performance goods should
                                            weigh 20% of total crane capacity. Width of forks is
                                            adjustable and the crane tower is also adjustable in height.
                                            CK-series is the manual balancing version.
                                          • Fork Hook, 2500 kg MK25

                                          • Fork hook.

                                            • Capacity: 2500 kg

                                            Converts forklift into a mobile crane in seconds. Fork hook is adjustable along the length of the forks and secures the forks with thumb screws. Swivel hook includes a safety hatch. Weight is 25 kg and it suits max. fork dimension 160x60 mm.
                                          • Fork Extensions, 1800mm, fit 100 x 45 forks EX1800/100

                                          • Fork extensions.

                                            • Fork length: 1800 mm
                                            • Fits to fork width: 100x45 mm

                                            The simple but effective way of lengthening your forks to be able to handle longer loads safely. Heavy duty steel construction, fits on forks which are up to 50 mm in thickness. The extensions has an U-beam shape.
                                          • Fork Extensions, 1800mm, fit 125 x 45 forks EX1800/125

                                          • Fork extensions.

                                            • Fork length: 1800 mm
                                            • Fits to fork width: 125x45 mm

                                            The simple but effective way of lengthening your forks to be able to handle longer loads safely. Heavy duty steel construction, fits on forks which are up to 50 mm in thickness. The extensions has an U-beam shape.
                                          • Fork Extensions, 2200mm, fit 100 x 45 forks EX2200/100

                                          • Fork extensions.

                                            • Fork length: 2200 mm
                                            • Fits to fork width: 100x45 mm

                                            The simple but effective way of lengthening your forks to be able to handle longer loads safely. Heavy duty steel construction, fits on forks which are up to 50 mm in thickness. The extensions has an U-beam shape.

                                            .

                                          • Fork Extensions, 2200mm, fit 125 x 45 forks EX2200/125

                                          • Fork extensions.

                                            • Fork length: 2200 mm
                                            • Fits to fork width: 125x45 mm

                                            The simple but effective way of lengthening your forks to be able to handle longer loads safely. Heavy duty steel construction, fits on forks which are up to 50 mm in thickness. The extensions has an U-beam shape.
                                          • Fork Extensions, 2400mm, fit 125 x 45 forks EX2400/125

                                          • Fork extensions.

                                            • Fork length: 2400 mm
                                            • Fits to fork width: 125x45 mm

                                            The simple but effective way of lengthening your forks to be able to handle longer loads safely. Heavy duty steel construction, fits on forks which are up to 50 mm in thickness. The extensions has an U-beam shape.
                                          • Fork Extensions, 2400mm, fit 150 x 50 forks EX2400/150

                                          • Fork extensions.

                                            • Fork length: 2400 mm
                                            • Fits to fork width: 150x50 mm

                                            The simple but effective way of lengthening your forks to be able to handle longer loads safely. Heavy duty steel construction, fits on forks which are up to 50 mm in thickness. The extensions has an U-beam shape.
                                        • Drum Handling

                                            • Drum Grab, single DG10

                                            • Mechanical drum grab for forklift trucks.

                                              The drum grab is made for forklift trucks. It lifts 210 litre steel drums easily and quickly, without any hydraulic or electrical connections. The drum grab slips onto forks and is locked with screws. You lift, transport and deposit drums without leaving the
                                              driver position. Capacity for DG10 is 470 kg. It weighs 55 kg.

                                              • Capacity (kg) 470
                                              • Weight (kg) 55
                                            • Drum Lifter, 350 kg DL350

                                            • Drum lifter.

                                              Lifts 210 litres

                                              For lifting 210 litres steel drum. Easy moves and handles open or closed head, loaded steel drums. Allows quick, gentle loading into overpacks and keeps drums upright during lift, minimize spills and
                                              injuries. Workes easily with overhead hoist or hook from forklift.

                                              • Weighs 9,5 kg.
                                              • Capacity (kg) 350
                                              • Weight (kg) 9,5
                                            • Hydraulic Drum Truck, 300 kg WA30A

                                            • Hydraulic drum truck.
                                              • Capacity: 300 kg
                                              • Drum size: 5572 mm (Ø22,5"), 210 Liter

                                              Ergonomically lifts, transports, and places poly,steel, or fibre drums on or off pallets.
                                              A spring-loaded clamp securelyholds any rimmed drum.
                                              Suitable lifting height for ledge and car.
                                              Compact design and very easy to handle.

                                              • Capacity (kg) 300
                                              • Weight (kg) 72
                                              • Steering wheels Ø125x32
                                              • Lift height 870-1675 mm (min-max)
                                              • Drive wheels (diameter) Ø125x32
                                              • Outer dimensions 952x956x1560
                                          • Hydraulic Jacks, Machine Skates

                                              • Hydraulic Jacks

                                                  • Forklift Jack,incl.2pcs stands HFJ-400A

                                                  • Hydraulic forklift jack.
                                                    • Ultra-low
                                                    • Capacity: 4 ton

                                                    Specially designed for forklift trucks, high capacity and a rugged construction. Extra low pick-up position with double 2-position lift pad levels for hard-to reach places under low profile forklift trucks.
                                                    Unique design of the hydraulic pump incl. high-quality seal kits and built-in overload protection valve. Removable handle and compact size. Confirms EC- and ANSI-standards.
                                                  • Forklift Jack,incl.2pcs stands HFJ-700A

                                                  • Hydraulic forlift jack.

                                                    • Ultra-low
                                                    • Capacity: 7 ton

                                                    Specially designed for forklift trucks,
                                                    high capacity and a rugged construction.
                                                    Extra low pick-up position with double
                                                    2-position lift pad levels for hard-to reach
                                                    places under low profile forklift trucks.
                                                    Unique design of the hydraulic pump incl.
                                                    high-quality seal kits and built-in overload
                                                    protection valve. Removable handle and
                                                    compact size. Confirms EC- and ANSI-standards.
                                                  • Hydraulic Jack, 10 ton HM100

                                                  • Hydraulic Allround Jack.
                                                    • Capacity: 10 ton

                                                    This ultra-low-profile, compact and reliable basic design can be used in all positions, horizontal and vertical. It lifts both on the foot and on the top housing. The housing of the jack can rotate 360 degrees, which makes it unique. Suitable for all types of repair,
                                                    maintenance and installation work with machines. The very low foot height measures only 30 mm.
                                                    Removable pump lever.
                                                    Accurate lowering speed.
                                                    • Stroke: 230 mm
                                                    • Lift range: 30-650 mm
                                                  • Hydraulic Jack, 25 ton HM250

                                                  • Hydraulic Allround Jack.

                                                    Capacity: 25 ton

                                                    This ultra-low-profile, compact and reliable basic
                                                    design can be used in all positions, horizontal and
                                                    vertical. It lifts both on the foot and on the top housing.
                                                    The housing of the jack can rotate 360 degrees,
                                                    which makes it unique. Suitable for all types of repair,
                                                    maintenance and installation work with machines. The
                                                    very low foot height measures only 58 mm.

                                                    • Removable pump lever.
                                                    • Accurate lowering speed.
                                                    • Stroke: 215 mm
                                                    • Lift range: 58-720 mm
                                                  • Hydraulic Jack, 5 ton HM50

                                                  • Hydraulic Allround Jack.

                                                    Capacity: 5 ton

                                                    This ultra-low-profile, compact and reliable basic
                                                    design can be used in all positions, horizontal and
                                                    vertical. It lifts both on the foot and on the top housing.
                                                    The housing of the jack can rotate 360 degrees,
                                                    which makes it unique. Suitable for all types of repair,
                                                    maintenance and installation work with machines. The
                                                    very low foot height measures only 25 mm.

                                                    • Removable pump lever.
                                                    • Accurate lowering speed.
                                                    • Stroke: 205 mm
                                                    • Lift range: 25-573 mm
                                                  • Steel Jack, 10 T HVS-10A

                                                  • Steel jack.
                                                    • Capacity: 10 ton

                                                    HVS-series are developed in accordance with the latest safety regulations. Milled rack, geared wheels and tempered parts of driving gear. Lift from toe or clawed head. Safety crank with folding handle.
                                                    • Stroke: 300 mm
                                                    • Lift range: 90-1100 mm
                                                  • Steel Jack, 3 T HVS-3A

                                                  • Steel jack.

                                                    Capacity: 3 ton

                                                    HVS-series are developed in accordance with the
                                                    latest safety regulations. Milled rack, geared wheels
                                                    and tempered parts of driving gear. Lift from toe or
                                                    clawed head. Safety crank with folding handle.

                                                    • Stroke: 350 mm
                                                    • Lift range: 75-1075 mm
                                                  • Steel Jack, 5 T HVS-5A

                                                  • Steel jack.

                                                    Capacity: 5 ton

                                                    HVS-series are developed in accordance with the
                                                    latest safety regulations. Milled rack, geared wheels
                                                    and tempered parts of driving gear. Lift from toe or
                                                    clawed head. Safety crank with folding handle.

                                                    • Stroke: 300 mm
                                                    • Lift range: 70-1025 mm
                                                  • Toe Jack, 3ton TJ30

                                                  • Hydraulic toe jack.
                                                    • Ultra-low
                                                    • Capacity: 3 ton

                                                    Compact and strong toe jack has three (3) toe heights and is very versatile designed. The hydraulic pump is protected by the lift housing. Manual pump lever. It lifts both on the toe and on the top housing. Lift handle and adjustable support legs are included.
                                                    • Stroke: 130 mm
                                                    • Lift range: 15-240 mm
                                                  • Toe Jack, 8ton TJ80

                                                  • Hydraulic toe jack.

                                                    • Ultra-low
                                                    • Capacity: 3 ton

                                                    Compact and strong toe jack has three (3)
                                                    toe height and is very versatile designed. The
                                                    hydraulic pump is protected by the lift housing.
                                                    Manual pump lever. It lifts both on the toe and
                                                    on the top housing. Lift handle and adjustable
                                                    support legs are included.

                                                    • Stroke: 140 mm
                                                    • Lift range: 25-295 mm
                                                • Platform Trolleys, Furniture Handlers, Sack Trucks

                                                    • Platform Trolleys

                                                        • Platform trolley PP1-200

                                                        • Plastic platform trolley with foldable handle.

                                                          Platform trolley made of bolted steel tubes and profiles with one plastic platform and foldable handle.

                                                          • Capacity (kg) 200
                                                          • Weight (kg) 13
                                                          • Wheel diameter (mm) 100
                                                        • Service trolley PP2-200

                                                        • Plastic platform trolley with 2 shelves.

                                                          Platform trolleys made of bolted steeltubes and profiles with two plastic shelves.

                                                          • Capacity (kg) 200
                                                          • Weight (kg) 18,5
                                                          • Wheel diameter (mm) 100
                                                      • Furniture Handlers

                                                          • Corner movers, 600kg AR150

                                                          • Transport corners.

                                                            Capacity: 600 kg

                                                            For light-weight moving of rectangular goods on even grounds. Suitable for delivery and removal of furniture. Manual corners made of steel plates, with rubber pads and 3 castor wheels on bearings. 4 units per set.
                                                          • Hydraulic Transporter, 1800kg FM180A

                                                          • Hydraulic transporter ofr heavy machines and furniture.

                                                            Capacity: 1800 kg

                                                            For professional transport of heavy machines and furniture. Ideal for delivery, maintenance and installation work. Hydraulic transporters made of tubular profiles. Lift cylinders and pump handle. Lift plates with rubber pads, support frame, two steerable PU castor wheels on bearings and 5 m fixing straps. Sold in pairs.

                                                            Dimensions lifting plate: 600x60 mm
                                                          • Manual Furniture Mover, 600kg FM60

                                                          • Manual furniture mover.

                                                            Capacity: 600 kg

                                                            For moving of bulky and heavy items. Ideal for removal and installation work. Manual movers made of steel profiles, lift winch, crank handle, lift pads rubber covered, dual support rails, two PU castor wheels on bearings and 5 m fixing straps. Sold in pairs.

                                                            Dimensions lifting plate: 225x120 mm
                                                        • Sack Trucks

                                                            • Stairclimbing sack trolley HT-1312

                                                            • Stair climbing sack truck.

                                                              Capacity: 150 kg

                                                              This range of warehouse and sack trucks are made of welded steel tubes with single or double knife / foot plate, that can be fixed
                                                              or folded. Pneumatic tyres, strong steel rims, maintenance free rubber-sealed bearings.
                                                            • Dual footplate sack truck HT-1823A

                                                            • Universal dual footplate sack truck.

                                                              Capacity: 250 kg

                                                              This range of warehouse and sack trucks are made of welded steel tubes with single or double knife / foot plate, that can be fixed
                                                              or folded. Pneumatic tyres, strong steel rims, maintenance free rubber-sealed bearings.
                                                            • Three-way truck HT-1824

                                                            • Sack truck and trolley, with triple function.

                                                              Capacity: 250 kg

                                                              This range of warehouse and sack trucks are made of welded steel tubes with single or double knife / foot plate, that can be fixed
                                                              or folded. Pneumatic tyres, strong steel rims, maintenance-free rubber-sealed bearings. HT-1824 is a combination type, this model can be used as a sack truck and also as a trolley.
                                                            • Dual foot plate sack truck HT-1827

                                                            • Universal dual footplate sack truck.

                                                              Capacity: 200 kg

                                                              This range of warehouse and sack trucks
                                                              are made of welded steel tubes with single
                                                              or double knife / foot plate, that can be fixed
                                                              or folded. Pneumatic tyres, strong steel
                                                              rims, maintenance free rubber-sealed
                                                              bearings.
                                                            • Alu. foldable handtruck TR100

                                                            • Compact, foldable hand truck in aluminium.

                                                              Capacity: 100 kg

                                                              This range of warehouse and sack trucks are made of bolted, riveted or welded aluminium profiles with single or double knife/foot plate, which can be fixed or folded. Pneumatic tyres, strong rims, maintenance free rubber-sealed bearing and safety handles are standard on most trucks.
                                                          • Universal Shelving, Steel Cabinets, Scales, Accessories

                                                              • Universal Shelving

                                                                    • Tire rack

                                                                    • A system which can be combined in many variations. Each section is a complete unit. The assembly of the system is very
                                                                      simple and safe. The unique design allows access from all four sides. The bottom of the upright has a protective plastic foot, to avoid damage to the floor. Without the chipboards it is used as tyre shelving.

                                                                      Each shelf can carry 400 kg.
                                                                • Steel Cabinets

                                                                    • Welded cabine, blue

                                                                    • Welded steel cabinet.

                                                                      Durable welded metal cabinet with reinforced doors and concealed espanjolett locker. 4 adjustable shelves incl. in each cabinet. Additional shelves are available.

                                                                      Blue (RAL 5010)
                                                                    • Welded cabinet, gray

                                                                    • Welded steel cabinet.

                                                                      Durable welded metal cabinet with reinforced doors and concealed espanjolett locker. 4 adjustable shelves incl. in each cabinet. Additional shelves are available.

                                                                      Grey (RAL 7035)
                                                                    • Knock-down cabinet, blue

                                                                    • Knock-down cabinet.

                                                                      The knock-down cabinet is a boltless self-assembly model delivered as a flat pack. This makes it to a low cost alternative to the ready welded cabinet versions both as product and as for transportation. Two sizes are available in colour blue (RAL 5010) or grey (RAL 7035). Four adjustable shelves are included. Additional shelves also available.
                                                                    • Chemical cabinet, unisolated, grey

                                                                    • Environmental steel cabinet.
                                                                      Durable welded metal cabinet with reinforced doors and concealed espanjolett locker and four adjustable liquid-leak-free shelves. It has all security functions except fire protection. Lockable doors with perforated squares for air circulation. Filter plates are optional which fits the liquid collecting shelf pan.
                                                                    • Welded steel cabinet, black

                                                                    • Durable welded metal cabinet

                                                                      Durable welded metal cabinet with reinforced doors and concealed espanjolett locker. 4 adjustable shelves incl. in each cabinet. Additional shelves are available.

                                                                      Blue (RAL 9005)