Navigation : EXPO21XX > MATERIAL HANDLING 21XX > H31: Control Equipment > elobau sensor technology
Videos
Loading the player ...
  • Offer Profile
  • Over the last three decades, innovation, reliability, and flexibility have become elobau hallmarks. Today, elobau is one of the leading manufacturers in the field of non-contact sensor technology. In addition to a broad and continually expanding array of standard products, elobau offers customized solutions for various applications in industrial and automotive engineering.
Product Portfolio

  • Vehicle Components

      • Customer-Specific Products

          • AGCO Fendt V/R Switch

          • Preselector for selecting the travel direction. A steering wheel adjustment is also integrated that can be triggered directly on the switch.

          • Claas Armrest

          • A multifunctional armrest with single- and multiaxis joysticks to control additional attachments on the vehicle. Push button switches with customised symbolic and hand-throttle module are also in funktional design.

          • Case Thumbwheel

          • Switch knob with 2-4 position switch to prevent unintentional actuation.

          • Case FNR

          • Travel direction preselector with a mechanical lock and idle position. The surface has a pleasant, soft-touch coating that makes for comfortable operation.

          • Steyr Armrest

          • A multifunctional armrest with a rigid, customized operating panel consisting of several buttons with symbolic function display. To operate additional attachments, for example, a single-axis and dual-axis joystick and an electrical hand-throttle module have been integrated.

        • Joystick base and Joystick handle

            • J7 robust joystick

            • The J7 joystick was developed primarily for installation in the armrests of commercial vehicles. The design combines a high level of robustness, safety and reliability in a very small space. It is able to fully utilize these strengths under high loads and high-use applications.

            • JFT Fingertip Joystick

            • Due to its compact design, the fingertip joystick is ideal for use in control panels and armrests. The area of application ranges from industrial trucks, agricultural and construction machinery to countless industry applications.

            • Small version J2

            • The angular operating range is ±20°. The operating principle is non-contacting: - analogue: rotating magnetic field over hall-sensor - digital: reed technique. Short circuit-proof with analogue version (short circuit duration: unlimited). J2 has a 6/8/10 or 12 PIN Molex 5557 connector, alternatives on request. Please use the button "productfinder" for defining one of these products.

            • Compact design J6

            • The angular operating range is ±25° (±20°). The operating principle is non-contacting: – analogue: rotating magnetic field over hall-sensor – discrete output: reed technique. Short circuit-proof with analogue version (short circuit duration: unlimited). The J6 has a 6/8/10 or 12 PIN Molex 5557 connector. The actuating force can be adapted according to the handle. The static loading capacity (max. 150 mm from the point of rotation) is 750 N in the x and y axis, and 500 N in the z axis. Mechanical life: 8x106 operations equates 2x106 elobau cycles

            • CAN Box

            • CAN electronic module for J4 and J5 (J6 and other applications on request!)

          • Thumbwheel

                • Illuminated thumbwheel 175DT

                • 3-colour illumination The illumination is provided optionally via 3 LEDs or a multi-colour LED for the centre position. For example, the multi-colour LED maintains its illuminated colour until a signal position change occurs. Illuminated colours: - Optionally red, green, white, yellow, orange or blue - Red, green or blue with a multi-colour LED

                • Thumb wheel 151DT01

                • operating voltage 4,5 - 5,5 VDC
                  operating current max. 15 mA
                  output voltage 0,5 - 4,5 V DC ratiom. analogue
                  neutral position 2,5 V DC
                  load resistance > 20K-Ohm
                  temperature range -25…+85°C
                  protection class IP 67 DIN EN 60529

            • Push button switches

                • Push button switches with Super-Seal connector 145...AB

                • It is possible to have the button top printed with symbols. Please specify symbol and colour, when ordering. protection class connector fitted: IP 20 switch chamber: IP 67 button top: IP 64

                • Push button switches with Deutsch connector 145...AE

                • It is possible to have the button top printed with symbols. Please specify symbol and colour, when ordering. protection class connector fitted: IP 20 switch chamber: IP 67 button top: IP 64

                • Micro push button switches with thread M12/with LED 145MT..A/..B

                • It is possible to have the button top printed with symbols. Please specify symbol and colour, when ordering.

                • Micro push button switches with latching detent 145MT..D/..E

                • It is possible to have the button top printed with symbols. Please specify symbol and colour, when ordering.

                • illuminated PTO 151 PTO

                • Illuminated colours and other actuator colours on request.

                • Nano push button

                • Other arrangements available on request. Please enquire. It is possible to have the button top printed with symbols. Please specify symbol and colour, when ordering. (symbol Ø 10 mm)

                • Double push button

                • It is possible to have the button top printed with symbols. Please specify symbol and colour, when ordering.

                  protection class
                  connector fitted: IP 67
                  switch chamber: IP 67
                  button top: IP 64

                • Micro-rocker-switch

                • It is possible to have the button top printed with symbols. Please specify symbol and colour, when ordering. protection class connector fitted: IP 67 switch chamber: IP 67 button top: IP 64

              • Hand throttle

                    • operating voltage 4,5 - 5,5 VDC
                      operating current max. 15 mA
                      output voltage 0,5 - 4,5 V DC ratiom. analogue
                      load resistance > 20K-Ohm
                      temperature range -25…+85°C
                      protection class IP 67 DIN EN 60529

                • Steering Column Switch

                    • Lever switch

                    • switching voltage 48 V
                      switching current 0,5 A
                      switching power 10 W/10 VA
                      contact form 3 x N.0.
                      load resistance > 20K-Ohm
                      continuous current 300 mA
                      temperature range -30…+75 °C

                    • Universal switches Shuttle Lever

                    • temperature range storage temperature: 40...+85°
                      protection class (IEC 529) IP 67 DIN EN 60529
                      switching voltage 48 V
                      switching current max. 0.5 A
                      switching power max. 10 W

                    • Universal switches with two switching levels

                    • temperature range -30°C…+80°C
                      protection class (IEC 529) IP 54

                    • Steering column switch

                    • Thanks to its compact design and integrated mounting bracket, the steering column switch is ­well-suited for installation directly on the steering column. This steering column switch is used in agricultural vehicles, construction machinery and automotive work machines. The technology used has been proven for decades, is extremely sturdy and durable even under tough working conditions.

                  • Plunger Operated Switches

                      • With AMP-Super-Seal 2-pole black 144002

                      • switching voltage max. 48 V
                        switching current 0,3 A
                        switching power 10/12 W/VA
                        contact form N.O.
                        continuous current 300 mA
                        protection class connection fitted IP 67
                        protection class switch IP 67
                        temperature range -25…+130°C

                      • With Metri Pack 144015

                      • switching voltage max. 48 V
                        switching current 0,5 A
                        switching power 10/12 W/VA
                        contact form N.O.
                        continuous current 300 mA
                        protection class connection fitted IP 67
                        protection class switch IP 67
                        temperature range -34…+100°C

                      • With AMP-Super-Seal 2-pole blue 144016

                      • switching voltage max. 48 V
                        switching current 0,5 A
                        switching power 10/10 W/VA
                        contact form N.O.
                        continuous current 300 mA
                        protection class connection fitted IP 67
                        protection class switch IP 67
                        temperature range -30…+120°C

                      • With cable connection Metri-Pack_Delphi 144521

                      • switching voltage max. 48 V
                        switching current 0,5 A
                        switching power 5/5 W/VA
                        contact form N.C.
                        continuous current 200 mA
                        protection class connection fitted IP 00
                        protection class switch IP 67
                        temperature range -25…+85°C

                    • Float switches for fuel

                        • Float switch for fuel or hydraulic oil 298

                        • The elobau float switch 298... monitors the fill levels in water, hydraulic oil and fuel tanks. Thanks to its sturdy construction, up to lengths of 1200 mm, one-sided mounting without end support is sufficient.

                        • Float switch with fuel feed & return 351TEG..0

                        • This float switch is equipped with extraction and
                          return pipes and is perfectly suited for use in fuel and
                          water tanks. The float switch 351 TEG is mounted simply to the tank with the coupling ring. The aeration and
                          de-aeration of the vehicle tank can also be performed by the float switch.

                        • Float switch with fuel feed & return 351TEA

                        • Thanks to the extraction and return pipes, the float switch is well suited for use in fuel and water tanks. The float switch can be mounted simply to the tank with the coupling ring. The aeration and de-aeration of the vehicle tank can also be performed by the 361 TEA.

                        • Float switch for SCR systems 351ADBU

                        • This float switch was specially developed for SCR exhaust technology. The necessary urea is only stable in a defined temperature range. This is why this float switch features an additional circuit which enables connection to an external heating and cooling circuit system. The tank content can therefore be kept in a stable state without additional piping.

                      • Tilt sensor

                            • Tilt sensor – single axis / two axis

                            • Whether at the platform of a lifting ramp or the fork tree of a stacker, even with difficult installation conditions the new, mercury-free tilt switches N3/N4 of elobau gives an easy handling.

                            • Thumb wheel 151DT01

                            • Please use the button `productfinder` for defining one of these products.

                        • Angle sensors

                            • Angle sensor with plain or ball bearing 424A..A

                            • General information: The angular measuring range is between 30° and 120°. The measuring principle is non-contacting (rotating magnetic field over hall-sensor). The system is short circuit-proof (with unlimited short circuit duration). The angle sensor is equipped with a 3-PIN AMP Superseal 1.5 plug. There is no mechanical stop. EMC standards for motor industry (DIN 40839; testing impulses 1, 2, 3a/b; interference withstand 200 V/m). Housing material: PBT. * with operating voltage: 10 V < 250, 30 V < 1250
                              Please use the button `productfinder` for defining one of these products.

                            • Angle sensor with redundancy 424R

                            • The angular measuring range is between 30° and 120°. The measuring principle is noncontacting (rotating magnetic field over hallsensor). The system is short circuit-proof (with unlimited short circuit duration). There is no mechanical stop.
                              The angle sensor meets automotive industry EMC standards (DIN 40 839 testing impulses 1, 2 , 3a/b; interference immunity 200 V/m; burst 2 kV).
                              Please use the button `productfinder` for defining one of these products.

                            • Axial angle sensor 424Z

                            • General information The angular measuring range is between 20° and 120°. The measuring principle is noncontacting (rotating magnetic field over hallsensor). The system is short circuit-proof (with unlimited short circuit duration). There is a mechanical stop at approx. 180°. The angle sensor meets motor industry EMC standards (DIN 40 839 testing impulses 1, 2, 3a/b; interference withstand 200 V/m; burst 2 kV). The rotary axle is in a plastic bearing. Therefore, no force must act on the rotary axle, i.e. no levers are permitted.

                            • Angle sensor 360° (optional 2. output) 424D

                            • Angle sensor 360° General information: The angular measuring range is between 20° and 359°. The measuring principle is non-contacting (rotating magnetic field over hall-sensor). The system is short circuit-proof (with unlimited short circuit duration). There is no mechanical stop. EMC standards for motor industry (DIN 40839; testing impulses 1, 2, 3a/b; interference withstand 200 V/m). Housing material: PBT.
                              Please use the button `productfinder` for defining one of these products.

                          • Machine Safety

                          • Safeguard your processes and protect your employees! The machine safety product line offers an entire range of functions from reliable detection to signal evaluation and transmission to the machine control.
                            The magnetically-actuated safety sensors enable covered installation with high switching distances and offset values. In addition, the risk of manipulation is significantly limited. For small machines, a compact, space-saving system is available – this consists of a safety sensor with integrated evaluation electronics. The safety guard lockings prevent guard doors from opening or restarting when the danger zone is open. The machine safety product line is rounded off with E-stop buttons, standstill monitors as well as interfaces for input and output extension.

                              • Configurable safety system

                                  • eloFlex 471EFR

                                  • Configurable safety assessment unit with max. 4 independent safety inputs (2-channel) and 4 safety outputs (2-channel) as well as 4 control outputs. The internal logic link is configured specifically for each customer.

                                  • eloProg - the modular safety solution

                                  • For enhanced safety with the highest possible flexibility.

                                  • Speed-Monitor for machines and drives

                                  • The motion detector is used for monitoring motion to ensure safe setup operation. Its function also allows safe access to the machine room after the machine has been idle.

                                • Safety Control Units

                                    • For 2/16 sensors 46311.B2

                                    • A maximum of 16 sensors may be used with an interconnection system. We recommend for the sensors the use of elobau interface units 363 V99 / 363.97

                                    • For 4/32 sensors 462121H

                                    • A maximum of 32 sensors may be used with an interconnection system. We recommend the use of elobau interface units 363 098.

                                    • For 2/16 sensors 47011.B1

                                    • A maximum of 16 sensors may be used with an interconnection system. We recommend for the sensors the use of elobau interface units 363 V99 / 363.97

                                    • For 4/32 sensors 471M41H31

                                    • A maximum of 32 sensors may be used with an interconnection system. We recommend the use of elobau interface units 363 V98 / 364 .97.

                                  • Safety Sensors

                                      • Sensor with control contact and stainless steel housing

                                        • with PVC cable
                                        • UL- and FDA-approval (food safe)

                                      • 30420000SH/VH for sensors 171... and 120272/V62

                                      • Hygiene magnet meets CEN/TC 153/HN 108E

                                    • Safety locking device

                                        • Straight design

                                        • Closed-circuit current principle: guard locking by spring force. Release by applying voltage to the interlocking solenoid.
                                          Open-circuit current principle: guard locking by applying voltage to the interlocking solenoid. Release by spring force.

                                        • insertion funnel ZA0S

                                        • If an insertion funnel is used, even inexactly positioned actuators are inserted reliably in the actuating head due to the large opening aperture, thus protecting the safety switch against mechanical influences. The insertion funnel can only be used in conjunction with an actuator for insertion funnel.

                                        • Lockout bar for guard locking ZE0S

                                        • Lockout bar to prevent the unintentional closing of a safety guard. For safeguarding the lockout bar, there are 3 drilled holes available, each with a diameter of Ø 7,2 mm. The locking dunction is given with a bolt diameter of 4,5 mm to 7,0 mm. For blocking the actuating head, the lockout bar must be inserted in opened postion into the actuating head. Subsequently the slide is inserted into the actuating head until the drilled holes overlap.

                                        • Pivot for supporting release ZL

                                        • Pivot different closing / individuell key of 0° to 180°

                                      • Emergency-Stop-push-button

                                          • NHT04S

                                          • Emergency-stop-push-button with a illuminated blocking protection collar and key release

                                          • contact element for Emergency-stop-push-button

                                          • contact element with 2 N/C / failure protection / illumination KE20SFB

                                        • Interface for input extension unit control

                                            • 363V99

                                            • Interface for 8 sensors for safety control units 47011.B1 / 46311.B1. / 471EFR

                                            • 363V97

                                            • nterface for input extension, can be used up to PL "d" (category 3) in accordance with

                                            • 364097

                                            • Interface for 4 sensors with control output for safety control unit 471 M

                                          • Cable sets & Accessories

                                              • Round connector M8 4-pole K04.00

                                              • Suitable for all sensors with 4-pole round connector with thread M8

                                              • Round connector M12 4-pole K14.00

                                              • Suitable for all sensors with 4-pole round connector with thread M12

                                              • 35104. Anti-tamper mounting screws

                                              • To prevent the unauthorized removal of the sensor and magnet fixing screws, we recommend the use of our socket head inserts.

                                            • Level measurement

                                                • Miniatures and broken finger switches

                                                    • 204KS compression grommet

                                                    • switching voltage max. 250 V
                                                      switching current 1 A
                                                      switching power max. 50/50 W/VA
                                                      protection class IP 67
                                                      contact form N.O. or N.C.
                                                      material PP
                                                      temperature range -25…+105°C
                                                      connection M12 - 4-pol. or PVC cable

                                                    • 207KSD

                                                    • switching voltage max. 250 V switching current 1 A switching power max. 50/50 W/VA protection class IP 67 contact form N.O. or N.C. material PP temperature range -25…+105°C

                                                  • Bulk material switch and level indicators

                                                      • 119DA

                                                      • Bulk material switch with cable output.
                                                        Suitable for products which pile up in a conical shape

                                                      • Level indicator 36028..K

                                                      • Circular instrument - Switching points must be specified when ordering. Please use the button `productfinder` for defining one of these products.

                                                    • Proximity Switches

                                                        • 123

                                                        • switching voltage max. 250 V switching current 3 A switching power max.100/100 W/VA protection class IP 67 contact form N.O. temperature range -25…+75°C

                                                        • 114010 distance ≤ 4mm

                                                        • switching voltage max. 48 V AC/DC switching current max. 0,5 A switching power max. 10/10 W/VA protection class IP 67 contact form N.O. temperature range -25…+75°C

                                                        • 140

                                                        • switching voltage max. 48 V
                                                          switching current max. 0,5 A
                                                          switching power max. 3/3 W/VA
                                                          protection class IP 67
                                                          contact form C.O.
                                                          temperature range -25…+75°C

                                                        • 1405

                                                        • switching voltage max. 48 V AC/DC
                                                          switching current max. 0,5 A
                                                          switching power max. 10/10 W/VA
                                                          protection class IP 67
                                                          contact form N.O.
                                                          temperature range -25…+75°C

                                                      • ATEX-Components

                                                          • Proximity switch 6100....0

                                                          • approved to RL 94/9 (ATEX) Before installing this sensor, please read the instruction „proximity switch series 6“ and the operation manual. * only with shielded cable Please use the button `productfinder` for defining one of these products.

                                                          • Cylindrical proximity switch 6200.0..0

                                                          • approved to RL 94/9 (ATEX) Before installing this sensor, please read the instruction „proximity switch series 6“ and the operation manual. Switches must be installed in a way being protected against shocks greater than 4 Joules. * only with shielded cable
                                                            Please use the button `productfinder` for defining one of these products.

                                                          • Cylindrical proximity switch 6500....0

                                                          • approved to RL 94/9 (ATEX) Bitte beachten Sie vor der Verwendung der Sensoren die Betriebsanleitung „Näherungsschalter Serie 6“.Before installing this sensor, please read the instruction „proximity switch series 6“ and the operation manual. * only with shielded cable
                                                            Please use the button "productfinder" for defining one of these products.

                                                          • Cylindrical proximity switch 6503.0..0

                                                          • approved to RL 94/9 (ATEX) Before installing this sensor, please read the instruction „proximity switch series 6“ and the operation manual. Please use the button "productfinder" for defining one of these products.