Navigation : EXPO21XX > IOT AND INDUSTRY 4.0 21XX > H06: Smart Factory > RadioForce
  • Offer Profile
  • We provide professional M2M / IoT solutions from data acquisition through data collection to data transmission to host systems – preferably wirelessly. We advise you on your M2M / IoT projects, assist in the implementation and in the use of your system.In the increasing measure enterprises need a clear and above all real time steered information about processes and goods. These must be formed faster, more efficiently, more perfectly and cheaper than up to now. More and more branches like healthcare, supply companies, facility management, pharma, automotive have recognized already the advantages of the M2M/Iot technology and use this for their advantage and differ therefore from their competitors at home and abroad.
Product Portfolio
  • Case Studies - Full transparency of the rack park in electroplating thanks to the system solution with RFID!

  • Which chicken lays how many eggs?

    This task became a challenge. An organic farmer came with the desire to find a way to tell which chicken laid how many eggs. Before working out a solution, it was first necessary to understand how chickens "work" when laying eggs. Is it random egg-laying - no matter where or when - or does a chicken have a certain methodology? Here was the information from the organic farmer very important.

    Chickens usually lay their eggs in nests. These nests are prepared by the organic farmer and placed in the best possible place (dry with straw, etc.) and an important point was thus clarified. The organic farmer also wanted to ensure that the chickens could roam freely at all times, as free range farming requires.

    Transponder on the leg

    Finally, the organic farmer requested that the chicken should not be harmed by the technology used. First is the correct attachement of the transponder to the appropriate chicken, i. H. each chicken gets an RFID transponder (with a unique number). This data is stored in a database. In addition, data on the chicken can be stored, e.g. B. birthday, race, origin etc. A transponder was used here, which is attached to the legs of the chickens (similar to a pigeon ring). This ensured uniqueness without harming the chicken.

    The basic requirement was prepared and now it was time for the nests.

    Each nest has an RFID reader

    The nests were prepared so that there was a hole in the middle. The downward sloping nest ensured that the egg always rolled towards the hole. Below the hole was a small spring-loaded flap that gave down as soon as the egg arrived. At this moment, a switch activates the reader, which reads the chicken in the nest (or the transponder).

    A coming and going thanks to RFID

    The chickens came and went throughout the day and by the evening the organic farmer knew which chicken had laid how many eggs (or none). Of course, these readings only make sense if you carry them out over a longer period of time in order to obtain well-founded information. Another challenge was the desire to keep the chickens safe in the barn at night. It may be hard to believe, but there are still a large number of predators that hunt chickens at night.

    With the already existing tag on the legs of the chickens, you can control a flap with RFID, which monitors the entry of the chickens and locks a flap at a desired time. According to the wishes and requirements of the customer, RadioForce has developed a tailor-made solution that is unique in agriculture to date. The next challenge will definitely come and we are already looking forward to it!

    Animal breeding of the future today!

    Happy and healthy chickens in their natural environment. So chicken breeding should be operated taking into account a species-appropriate attitude.

    RFID technology meets animal husbandry. Technology used sensibly with a win-win situation for EVERYONE!

      • Further Case Studies

          • Full transparency of the rack park in electroplating thanks to the system solution with RFID!

          • Complete rack park management with RFID for small and medium-sized electroplating

            The special feature of this project was the linking of a manual process of storage and retrieval with a modern and transparent system solution. With a number of around 1,300 to 1,500 racks, warehouse management did not appear to be a major challenge. However, the downstream production process was considerably more complex than originally thought.

            The solution required the seamless monitoring of racks throughout the production process (including the galvanic processes).
            As with any process in which individual racks are to be recorded in order to be able to fulfill a clear assignment in the course of the process, the racks must be given an individual identification. This is achieved with unique numbers of the RFID transponders (tags).

          • Real-time component recognition in vehicle production - optimization with RFID!

          • Towing eye detected!

            Component recognition in vehicle production - optimization with RFID. Another complex problem in the automotive industry that required a smart solution.

            The task

            A component in the vehicle MUST be verifiably built/installed in the vehicle. In this case it was the ASÖ (towing eye). According to legal requirements, this must be installed in the vehicle when it leaves the factory.

            This check was currently carried out according to the 4-eyes principle. The installation was documented twice in writing on a control document. Nevertheless, it happened again and again that vehicles left the factory WITHOUT the ASÖ. In addition, a 4-eyes principle is complicated and expensive these days. A solution was therefore sought that would automatically check and electronically document without human intervention. This is where RFID technology comes into play.

          • Vehicle tracking in car dealership parking garage - location detection at floor level with RFID!

          • Vehicle tracking in car dealership parking garage - location detection at floor level with RFID

            Daily vehicle search with intensive time wasting due to lack of location information.

            The task

            The customer wanted a "rough" location information from RadioForce. KISS (keep it short and simple) was the motto. This means that the customer only wanted to know on which floor, underground car park or service point a specific vehicle is parked. Perfectly sufficient to reduce search times by around 85-90%. A win for all employees, the customer and ultimately the company.

            Solution development:

            This project began with the discussion of the problem and subsequent inspection of the different locations and corresponding initial evaluation of the reading points. Both entry and exit of the vehicle must be registered. This vehicle information is previously stored in a database with its individual ID. Thus, the tag (transponder) fulfills the uniqueness that is important to identify EVERY INDIVIDUAL vehicle.

          • Rapid tool and machine inventory / counting at exhibition, service and maintenance companies with RFID!

          • Rapid tool and machine inventory/counting at exhibition, service and maintenance companies with RFID!

            Always the same problem: The "on site" project has just been completed, you come back to the company and realize that you didn't bring tools, machines or other valuable equipment back with you.

            Wouldn't it be great to take a simple quick inventory before leaving the location in order to then take one or the other almost forgotten "part" with you and save yourself time, work and above all money?

            A booth builder approached us with this problem. Tools and other equipment are regularly left lying around after a job. A new purchase is always associated with effort and money.

          • Rescue Helicopter Mission: Is Everything We Need There?

          • Scenario: An accident on the freeway. In no time at all, a rescue helicopter is prepared for take-off. Two aspects are to be considered.

            1. Does the helicopter crew have everything they need for this mission?

            2. Once withdrawn, such a bet costs a mid-range five-digit sum!

            So you want to make sure you have everything you need on board. No time for a complex and time-consuming inventory before the start. How do you make sure everything is "on board".

          • Automotive decorative parts identification with RFID!

          • What is the status of my installed parts in the vehicle?

            Actually a simple question. However, the answer is far more complicated than one might think. The automotive industry is one of the industries that uses by far the latest technologies. Both in the vehicle itself and in the production of your vehicles.

            During the development of a vehicle, almost all components are tested in a test vehicle for the first time. Due to the development, there are always parts that do not correspond to the wishes of the automobile manufacturer. In order to be able to make an analysis, the manufacturer needs the right data for the installed parts.

            To date, the parts have been provided with a label on which the version and quality status of the part is provided on a barcode. The manufacturer has to read this barcode in order to then receive the corresponding data.

        • GPS tracker family including SIM card (EUROPA coverage) and WEB platform

        • GPS tracker family including SIM card (EUROPA coverage) and WEB platform.
          First COMPLETE GPS tracker solution with all required components (GPS tracker, SIM card (Europe) with variable tariffs and WEB portal (personalized) to quickly monitor goods, assets or other objects in real time.

          A GPS tracker uses the GPS The tracker family also offers special functions tailored to the applications (animal tracking, anti-theft protection, speeding or simple position information).
          Various alarms allow routes to be better planned, redirected or shortened. Direct interactive influence on the operational process (optimal use of time and money).
          Extremely simple installation. Can also be installed by non-professionals. Preconfigured packages can also be called up.

          Optimal solution for the fleet of all company sizes.
          The most important basic equipment of the Smart City / IOT concept. Real-time visibility control.

            • Realtime GPS Tracker

            • Simple and efficient monitoring and control of various assets. A selected range of GPS tracker products for simple and efficient detection and monitoring of people, goods or vehicles (motorcycles, cars, trucks, tractors, construction machinery or other vehicles).
                • RFO-RVT720 Relay Typ Tracker

                • The RFO-RVT720 looks like a relay but is actually a GPS locator. It can query the real-time location information of the device through the platform, mobile APP (Micodus) and SMS.

                  The device can be used normally in your country (all Europe) GSM band: 850/900/1.800/1.900 Mhz. Any other separately available.
                  The tracker can be controlled remotely. In consequence the fuel pump can be cut remotely in case of a stolen vehicle.

                • RFO-WEB Portal for all GPS Tracke

                • The RFO web portal has been designed in partnership with MiCODUS as a cloud based solution with a complete set of services designed for remote management, fleet tracking, asset tracking and a diverse set of vertical applications.

                  As an off-the-shelf turnkey solution, MiCODUS is a secure, open and scalable platform that plays an essential role in the optimization of resource utilization by enabling visibility and simplifying management.

                • RFO-CVT790 GNSS Vehicle Tracker

                • The RFO-CVT790 is an advanced 2 G version multifunctional GNSS tracker. It can query the real-time location information of the device through the platform, mobile APP (Micodus) and SMS.

                  The device can be used normally in your country (all Europe) GSM band: 850/900/1.800/1.900 Mhz. Any other separately available.
                  The tracker can be controlled remotely. In consequence the fuel pump can be cut remotely in case of a stolen vehicle.

                • RFO-AVT500 Autonomous Vehicle Tracker

                • The RFO-AVT500 is designed for logstic companies to track and trace shipments on third-party vehicles which do not allow full telematics product installations and require a battery powered product for easy installation and removal. It contains built-in sensors for recording temperature and light levels, making the product ideal for monitoring perishable goods such as fruits, vaccines and pharmaceuticals in cold chain logistics. Its large and recharchable battery allows the product to operate for ninety-five days while providing location updates in ten-minute intervals.
                • RFO-OVT22 OBD Connector Vehicle Tracker

                • The RFO-OVT22 is an easy plug & play OBD tracker with superior location, tracking, reporting, logging and security capabilities.

                  Utilizing the GSM and GPRS communication network along with GPS technology, it is an ideal solution for private cars, leased vehicles and/or large fleets.

                • RFO-OVT55 OBD Vehicle Tracker

                • The RFO-OVT55 is an easy plug & play OBD tracker with superior location, tracking, reporting, logging and security capabilities. Utilizing the 4 G LTE - 2 G GSM/GPRS communication network along with GPS technology, it is an ideal solution for private cars, leased vehicles and/or large fleets.

                  You simply connect it or remove it to/from the OBD interface in your car. While having activated the SIM card you can immediately connect to the web portal an start up track your vehicle as well as set up the requested parameters per vehicle.

                • RFO-APT935 Autonomous Animal Tracker

                • The RFO-APT935 is a GPS tracker which is designed for animals such as cows, sheeps, horses, large dogs or any other animal of mid/large size. It comes with a 3.000 mAh rechargeable battery which allows to operate for around 3 - 5 days under normal working mode. It is waterproof (IP 65) to ensure stable functionality even under very rough conditions.
                • RFO-APT70 Autonomous Animal Tracker

                • The RFO-OPT70 is a high quality GPS tracker with superior location, tracking, reporting, logging and security capabilities. Utilizing the GSM and GPRS communication network along with GPS technology, it is an ideal solution for bigger size animals (dogs, sheeps, goats or any other animals).
                • RFO-AAT90 Autonomous Asset Tracker

                • The RFO-AAT90 is designed for any type of assets which do not allow full telematics product installations and require a battery powered product for eay istallation and removal. It has a backup 3 000 mAh rechargable battery that allows the device to operate for around 5 days if the location update is made in 10 minutes intervals. With its high quality built-in microphone it can be used for remote voice monitoring or for SOS (using the panik button) to call for help under emergency situations.
                • RFO-CVT710

                • The RFO-CVT710 is a cost effective GPS Locator. It can query the real-time location information of the device through the platform, mobile APP (Micodus) and SMS. The device can be used normally in your country (All Europe) GSM band: 850/900/1800/1900 Mhz. Any other separately available. The Tracker can be controlled remotely. In consequence the fuel pump can be cut remotely in case of a stolen vehicle.
                • RFO WR02

                • Locate people inside and outside a building, alert the easily, give easily access to designated passes and communicate through a clear speech connection
                • RFO KF03

                • Locate people inside and outside a building, alert the easily, give easily access to designated passes and communicate through a clear speech connection.
              • Products M2M / IoT

              • M2M / IOT offers a variety of ways to optimize data, processes or workflows. It requires a competent analysis in order to use the right technology such as RFID, sensors, data collectors (repeater/ databridges) and data transmission (gateways/data transmitter) equipment. Here, factors such as functions, needed specifications, environmental conditions and application requirements have to be defined previously and/or analyzed upfront.DYNAMIC instead STATIC
                As a dynamic technology M2M / IoT provides the ability to keep changing data "up to date". The fact that each RFID tag or sensor own UID owns (Unique Identification No.) makes it unique and hence impossible confusion. Errors are avoided and optimizes the quality of the process.
                  • Tags/ RFID Transponder

                  • Tags are the starting point for a wireless identification. Whether activated by the reader (passive) or battery powered (active) they send the tag ID number to the reader.

                    Depending on type of the tag, additional information (temperature, humidity, switching states etc.) can be transmitted.
                      • Galvanic Tag - RFO-GLV9020

                      • The RFO-GLV9020 RFID Tag has an operating frequency of either 902-928 MHz (US) or 865-868 MHz (EU) and is based on the Alien Higgs-3 IC, which provides a max read range of up to 10.8 meters.
                        The industrial RFID tag AGX9020 is IP 68-rated, making it suitable for harsh outdoor industrial environments as well as exposure to water and contaminants.
                      • RF AT PWR415 - Active Ultra Long Range Tag (read range up to 400 m)

                      • The RFO AT PWR415 is a rugged active tag capable of tremendous performance while tracking assets in harsh environments.

                        Over-molded for maximum durability and providing flexible mounting options, the RFO AT PWR415 includes enough battery capacity for up to 5 years of duty in almost all applications. Radio communications penetrate snow/moisture and provide exceptional distance (up to 400 m).

                      • RF AT PWR50 - BAP Active Long Range Tag (read range up to 50 m)

                      • The RFO AT PWR50 utilizes the latest Battery Assisted Passive  technology and is a rugged tag capable of  exteme impact  resistance and tremendous performance.


                        Offering active tag read ranges (up to 50 m) on, off, or near metals, with passive tag  infrastructure costs, the RFO AT PWR50 is often deployed in outdoor heavy industrial environments anywhere in the world (up to 400 m).

                      • RFO-RECY 3318 UHF

                      • Recycable Tags protecting the enviroment

                        The RFO RECY Tag family is a recycable RFID Tag. Has no plastic substrate inside and it is 100% paper based.

                        Clean & green manufacturing through recyclability of the material. Another highlight of this Tag is the low carbon footprint.

                      • RFO-PCB MoM Tags

                      • Extreme durability
                        • Waterproof, and resistant to chemicals, vibration, shock and temperature fluctuations
                        Exceptional size-to-performance ratio
                        • Reliably read-write when mounted on metal objects from up to 2,5 m
                          Advanced technology
                        • UHF permits anti-collision capability and fast data rate communication.
                        • Special development for industrial and Offshore applications
                      • RFO-N217-Nail-Tag

                      • RFO-N217 is a unique nail-shaped uhf passive rfid tags that can easily be hammered into trees and wooden containers.

                        Nail tag RFO-N217 has rust resistance in wet and chemical environment as well as water and dust proof. When RFID Nail Tag RFO-N217 application in tree tracking,it can tell you the age of the tree in the forest, the fruiting rate of the fruit trees,and store all details of trees and wooden.

                      • RFO-HT1171

                      • RFO-HT1171 is a high temperature resistant flexible printed circuit (FPC) RFID inlay, it is small, light, thinner, high temperature resistance, flexible & soft, Long read range and Widely used for industrial equipment, industrial laundry system with high temperature resistant needed & washable products.
                      • RFO BTAC

                      • Smallest tags - embedded in tools, devices, medical instruments and more.

                        Small form factor - built into a confined space.

                        Exceptional long -lasting - resistant with extreme loads, dustproof and waterproof, resistant to chemicals, acids and extreme temperatures.

                        Versality - available in LF, HF and UHF and can be designed individually and adapted to application requirements.

                      • RF HT 225 - High Temperature UHF Tag (up to 225°C)

                      • Specification
                        Area of application

                        • Facility Management
                        • Asset Management

                        Product description

                        Extreme durability
                        • Waterproof, and resistant to chemicals, vibration, shock and temperature fluctuations

                        Exceptional size-to-performance ratio

                        • Reliably read-write when mounted on metal objects from up to 4 m

                        Advanced technology
                        • UHF permits anti-collision capability and fast data rate communication.
                      • RF HT 230 - High Temperature UHF Tag (up to 230°C)

                      • Specification
                        Area of application

                        • Facility Management
                        • Asset Management

                        Product description

                        Extreme durability
                        • Waterproof, and resistant to chemicals, vibration, shock and temperature fluctuations

                        Exceptional size-to-performance ratio

                        • Reliably read-write when mounted on metal objects from up to 2,5 m

                        Advanced technology

                        • UHF permits anti-collision capability and fast data rate communication.
                      • RF SF UHF Tag - High Temperature UHF Tag (up to 225°C)

                      • Specification
                        Area of application

                        • Facility Management
                        • Asset Management

                        Product description

                        Extreme durability
                        • Waterproof and resistant to chemicals, vibration, shock and temperature fluctuations

                        Exceptional size-to-performance ratio

                        • Reliably read-write when mounted on metal objects from up to 4 m
                        Advanced technology
                        • UHF permits anti-collision capability and fast data rate communication.
                      • RF NW01 Tag - Industrial UHF Tag (extremely robust) to be embedded into easily plugged into circular recesses

                      • Specification
                        Area of application

                        • Facility Management
                        • Asset Management

                        Product description

                        EPC UHF RFID Plug-In (Metal, Concrete, Wood) Tag


                        The AGX NW01 Tag is designed to facilitate quick embedding into metal, concrete or wood in industrial applications. The identification of assets in industrial environments can be extremely challenging because there is a risk the attached tags may be damaged or detached in the rugged environment they inhabit.

                        The AGX NW01 Tag's design not only protects the chip but also enables embedded RFID in a quick, convenient and efficient way. Thanks to its innovative design, the AGX NW01 Tag can be easily plugged into circular recesses on assets without the need to mess with epoxy.
                      • RF XXS01 AC Tag - Extra Small UHF Tag to be placed ON metal

                      • The RF XXS01 AC can be mounted on metal and will withstand repeated autoclave cycles. It is designed to meet FDA requirements and is an ideal solution for RFID enabling surgical instruments. The RF XXS01 AC is round and measures at 0.24 inches in diameter by 0.1 inches thick with a read distance of 5 feet (1,5 m). It is biocompatible to ensure safety in medical applications and have been tested to survive high heat in repeated autoclave cycles and industrial chemical washes that normally complicate the application of RFID devices
                      • RF XXS02 AC Tag - Extra Small UHF Tag to be placed ON metal

                      • The RF XXS02 AC Tag high performance RFID metal tag are designed to comply with FDA requirements for Unique Device Identification initiative for medical devices. The RF XXS02 AC enables automatic tracking for improved productivity and reduced risks in foreign object debris (FOD), infection control and product recalls.
                      • RF MIC2 AC Tag - Autoclave Resistant UHF Tag to be placed ON metal

                      • Specification
                        Area of application

                        • Facility Management
                        • Asset Management

                        Chemical sterilization for decontamination
                        Liquid chemical sterilants include glutaraldehyde, hydrogen peroxide, hydrogen peroxide-peracetic acid combinations, sodium hypochlorite, and peracetic acid. Pass

                      • RF MS AC Tag - Slim Titanium UHF Tag to be placed ON metal

                      • The RF MS AC Tag Label is a revolutionary RFID label (made out of Titanium) for smart tagging both metallic and non-metallic assets. Titanium is extremely flexible and has a low profile to fit small assets like smart phones and tablets.
                      • RFO MoM 100 Tag - Small UHF Tag to be placed ON metal

                      • Specification
                        Area of application

                        • Facility Management
                        • Asset Management
                        • Automotive
                        • Healthcare
                        • Industry
                        • Service and Maintenance

                        Related products
                        UHF Fix Reader

                        UHF Handheld Reader

                        UHF Smart PDA

                        Product description

                        RFO MoM 100 Label Tag (Mount on Metal)


                        The RFO MoM100 label is the first to market Global, small form factor, on metal label. Optimized for thermal barcode printers, the RFO MoM100 enables low cost and hassle-free RFID deployment.

                        The RFO MoM100 redefines the standard for consistency and reliability for tagging applications demanding a very small tag with Global capabilities.

                        Ultrathing form factor label providing on metal/liquides functionality. Supplied on a roll for hassle free printing.
                      • RFO MoM 150 Tag - UHF Tag to be placed ON metal

                      • The RFO MoM150 label is the first to market Global, small form factor, on metal label.

                        Optimized for thermal barcode printers, the RFO MoM150 enables low cost and hassle-free RFID deployment.

                        The RFO MoM150 redefines the standard for consistency and reliability for tagging applications demanding a very small tag with Global capabilities.

                      • RFO-CC4631

                      • Industrial construction Tag

                        The RFO-CC4631 is an rfid in construction tag designed to be mounted on metal and also embedded in concrete.

                        Especially used in building contructions

                        RFO-CC4631 rfid in construction embedded RFID tag can be used to uniquely identify building materials improving the management of construction processes.

                      • RFO-STM16

                      • Industrial equipment tracking Tag

                        Rugged 304 steel RFID metal Tags RFO-STM16 has been designed specifically for tagging objects under the most harsh environment.

                        Full metal jacket for most harsh environment

                        With its full metal jacket, it offers the best protection to the equipment tracking tags.

                        The RFID screw Tags RFO-STM16 can be used almost anywhere with no limitation whatsoever, and it is perfectly suitable for the oil and gas industry, as well as for tracking all kinds of outdoor equipments, and is able to resist high temperature and pressure.

                      • RFO-LU2556

                      • RFO-LU2556 are embedded RFID Tags with long read ranges of up to 9 meters on metals. Designed for heavy industry and outdoor applications in high temperature (up to 260°C) environment. The RFO-LU2556 features a high impact, water proof, durable encasement. High Temperature long read ranges RFID Tags RFO-LU2556 are excellent choice for tracking large assets in open storage environments, without the concern of a battery.
                      • RFO-LED2090

                      • RFO-LED2090L and RFO-LED2090M are RFID location tracking tags with LED indicator that can be turned on through RF command allowing quick and easy visual identification of a specific tag among several others.

                        RFID LED Tags RFO-LED2090L and RFO-LED2090M does not require any kind of maintenance and can be used in situations where batteries are not recommended

                      • RFO-DF10530

                      • Dual Frequency RFID Tag RFO-DF10530 are equipped with the EM4423 chip that combines two functionalities on one single die: the EPC technology used for long-range application purposes and the NFC technology used to exchange data in close proximity.

                        Both protocols may share a common, unique ID, Leveraging the IC's unique features, so the RFO-DF10530 can be read by an NFC smartphone and by an UHF RFID reader (mobile or fix).

                      • RFO-LU1540

                      • RFO-LU1540 is a rfid tag for high temperature with extreme read ranges of up to 6 meters on metal and 1.7 meters off metal.

                        Designed for heavy industry and outdoor applications, RFO-LU1540 features a high impact, water proof, durable encasement.

                        High Temperature RFID RFO-LU1540 is an excellent choice for tracking large assets in open storage environments, without the concern of a battery.

                      • RFO-BUTIV11 UHF

                      • The RFO-BUTIV11 is an RFID tag. The cover material is paper-based PVC.

                        Standard features :
                        • The frequency is 860 - 960MHz
                        • EPC: 96 bits / TID: 32 bits serialized
                        • The standard delivery format self-adhesive die-cut label (wet paper insert)
                        • 100% yield on standard rolls (bad tags have been replaced)
                        • Medium gloss face paper, suitable for thermal transfer printing with selected ribbons
                        • ISO 9001 and ISO 14001 certified
                      • RFO-LU2941

                      • RFO-LU2941 RFID Smart tag is specifically designed to be mounted on metal surface for industrial markets where critical and potentially hazardous situations require reliable identification of assets.

                        The RFO-LU2941 extreme temperature rfid tags can survive extreme temperature up to 300°C and other harsh elements such as high impact and caustic chemicals (Acid,Alkali etc).

                      • RFO-LU2962

                      • Application RFO-LU2962 RFID tag in car,you can find that it can withstand exposure to high temperatures (Withstand 300°С for 100 hours), chemicals, pressure and torsion, with uncompromised performance.

                        These RFO-LU2962 UHF RFID Tags are resistant to severe physical, mechanical, and thermal environments.

                        Currently, you can found RFO-LU2962 High Temperature Resistant with long reading range RFID Tag application in car,industrial tools, medical trays, heavy equipment, car and aerospace components, cargo containers, and even blade and rack servers.

                      • RFO-LU1542

                      • The RFO-LU1542 is a high temperature RFID tag optimized for for industrial environment and metal substrates. 

                        With a combined ability to survive high temperatures to 280°С for 50 minutes, 250°С for 150minutes and a rugged encapsulation, this UHF RFID tag is ready for deployment in a variety of applications without sacrificing read range performance.

                        The RFO-LU1542 high temperature tags is an ideal solution for applications where surviving excessive heat in a rugged environment is needed such as: healthcare sterilization processes, manufacturing, and automotive post-paint processesg application in car,industrial tools, medical trays, heavy equipment, car and aerospace components, cargo containers, and even blade and rack servers

                      • RFO-LU2220

                      • The RFO-LU2220 are RFID on metal tags designed to reliably perform in high temperature conditions. 

                        These RFID on metal tags offer robust performance at an attractive price point. constructed with high temperature material, it can endure temperatures of 280°С for 50 minutes, 250°С for 150minutes.

                        The RFO-LU2220 UHF on metal tags are EPC Class 1 Gen 2 and RoHS compliant and has an IP68 rating. The tags are available in frequencies for North America, Europe, Japan and more.

                      • RFO-LU1118

                      • The RFO-LU1118 is a rfid security tag that can be mounted by screws to metallic assets in high temperature environment. This high temperature durable RFID Screw tag is an excellent solution for a wide range of applications.

                        From tracking of surgical tools and trays, to process management in automotive manufacturing and identification of metallic assets in the oil and gas, construction and mining sectors.

                      • RFO MoM 400 Tag - UHF Tag to be placed ON metal. Read range up to 4 m

                      • Specification
                        Area of application

                        • Facility Management
                        • Asset Management
                        • Automotive
                        • Healthcare
                        • Industry
                        • Service and Maintenance

                        Related products
                        UHF Fix Reader

                        UHF Handheld Reader

                        UHF Smart PDA

                        Product description

                        RFO MoM 400 Label Tag (Mount on Metal)


                        The RFO MoM400 label is the first to market Global, small form factor, on metal label.

                        Optimized for thermal barcode printers, the RFO MoM400 enables low cost and hassle-free RFID deployment.

                        The RFO MoM400 redefines the standard for consistency and reliability for tagging applications demanding a very small tag with Global capabilities.

                        Ultrathing form factor label providing on metal/liquides functionality. Supplied on a roll for hassle free printing.
                      • RFO MoM 600 Tag - UHF Tag to be placed ON metal. Read range up to 6 m

                      • Specification
                        Area of application

                        • Facility Management
                        • Asset Management
                        • Automotive
                        • Healthcare
                        • Industry
                        • Service and Maintenance

                        Related products
                        UHF Fix Reader

                        UHF Handheld Reader

                        UHF Smart PDA

                        Product description

                        RFO MoM 600 Label Tag (Mount on Metal)


                        The RFO MoM600 label is the first to market Global, small form factor, on metal label.

                        Optimized for thermal barcode printers, the RFO MoM600 enables low cost and hassle-free RFID deployment.

                        The RFO MoM600 redefines the standard for consistency and reliability for tagging applications demanding a very small tag with Global capabilities.

                        Ultrathing form factor label providing on metal/liquides functionality. Supplied on a roll for hassle free printing.
                    • Handhelds/PDAs

                    • Small and mobile Smart handheld PDA to read and write RFID tags with optinal Auto-ID functions. These mobile and handy PDA are designed for reading and writing of RFID tags. In addition these devices can be equipped with Auto-ID options.

                      Rugged mobile computers to read and write RFID tags with optinal Auto-ID functions. A range of rugged mobile handhelds for reading and writing of RFID tags. These manufacturers habe been selected according to their their long experience as suppliers for RFID handhelds. These devices can be additionally equipped with Auto-ID options.
                        • RFO-TT2000 UHF

                        • The RFO-TT2000 with Integrated long-range RFID handheld reader brings a new level of efficiency and accuracy to inventory management, order fulfillment, cross-docking, and more. The integrated long-range antenna supports a best-in-class RFID read range, and coupled with high-performance ASIC radio technology, delivers higher throughput, so inventory counts can be accomplished more quickly and accurately.

                          Rugged but lightweight

                          With rugged design, the RFO-TT2000 is built for your semi-industrial environments, yet is lightweight with the right ergonomics for all-day comfort. And the large touchscreen, intelligentized keypad and Android OS deliver an intuitive and flexible platform for your RFID application needs today and tomorrow.

                        • RFO-TT400 UHF

                        • RFID brings a new level of efficiency to inventory and asset management, order fulfillment and more. To maximize productivity, you want to give your workers a device that provides a new level of comfort, task speed, ease of use and accuracy to your RFID applications.


                          Extremely light and handy

                          The RFO-TT400 handheld RFID reader delivers it all. The RFO-TT400 is one of the lightest devices in its class with the right ergonomics for all-day comfort. Superior RFID read performance and receiver sensitivity enable lightning fast capture of even the most challenging RFID tags.

                        • RFO-X6 (LF/HF) Data Recorder

                        • The ultra-rugged Android phablet with RFID (LF/HF)*

                          If you could take the high-visibility functionality of a tablet and the go-anywhere performance of a rugged handheld and combine them, you'd end up with one device that could take you through your workday with ease. Fortunately for you, this state-of-the-art solution already exists: it's the RFO-X6 ultra-rugged Android phablet. Optional LF (125-134,5kHz) or HF (13,56MHz) reader!

                        • RFO-X2 (LF/HF/UHF)

                        • Extremely robust PDA in smartphone format

                          The RFO-X2 mobile computer is a real all-in-one device. The handheld RFO-X2: a computer, a scanner, an RFID reader, a camera and a 4G/LTE phone. Packed in a robust and compact housing, it can also be used outdoors. The RFO-X2 has the handling of an Android smartphone.

                        • RFO-TT620 RFID

                        • The RFO-TT620 Handheld is embedded with Android 10.0, as pioneed in this industry. GMS certificated shall product high-standard security level togethter with ulitmate experience.

                          Industrial and Humanized Hardware Design

                          Industrial&humanized keypad design and tough 5.5 inch touch screen together with high resolution of 720*1440 display shall match high standards in logistics, express and retail.

                        • RFO-X41 (HF/UHF)

                        • The lightweight scanning powerhouse

                          It's a touchscreen world — but some applications still require a real numeric keypad. The rugged Nautiz X41 offers both. Running powerful Android 11, it comes with your choice of a 1D scanner or 2D imager, plus an 8-megapixel camera, NFC and generous storage. This rugged handheld captures data through capacitive touch gestures or physical buttons, and protects your information thanks to integrated security and communications features.

                        • RFO-AML HR250LF

                        • Powerful Lifestock USB/BT Reader

                          The all new RFO-LF AML-HR250 ISO11784/11785 RFID Handheld Reader is the perfect partner for the identification of EID tags and data transfer with USB and Bluetooth.

                          With a large Colour display, a directional keypad and an ergonomic but robust housing it is the right tool for everyday work on the farm. The new magnetic USB connection makes data transmission and charging easier than ever.

                        • RFO-AML HR600LF

                        • Powerful Lifestock USB/BT/WLAN Reader

                          The new RFO-LF AML-HR600 ISO11784/11785 RFID Handheld Reader sets a new standard for mobile data collection and connectivity with USB, Bluetooth and WLAN.

                          With a large Colour display, an alphanumeric keypad and an ergonomic but robust housing it is the right
                          tool for everyday work on the farm. The new magnetic USB connection makes data transmission and charging easier than ever. The bi-directional wireless data communication offers unique possibilities in combination with smartphones and wireless networks.

                        • RFO-CW95 HF/NFC

                        • High level of security with Android 12

                          The RFO-CW95 is a new powerful and extremely durable mobile computer with Android 12 operating system.

                          Octa-core processor and large memory

                          It comes with a powerful octa-core processor, optional large memory, 5.5 inch HD screen and removable 5000 mAh battery, the excellent configuration ensures highly efficient operation.

                          High security level

                          It supports optional barcode scanning, NFC, and front and rear cameras, and has an IP68 rating and 1.5 meter drop resistance (28 test runs).

                          This device is perfect for applications in retail, logistics, warehousing, electricity, finance, transportation, manufacturing, etc.

                      • Software

                      • With application software (application program or short application) Computer programs are referred to, which are used to manage a useful or desired functionality or support. They are the "solution of user needs." Examples of applications are: image editing, video editing, word processing, spreadsheet, specific business functions such as financial accounting, goods management etc.

                        However, now also partially desktop application software is called app , e.g. since the operating system Microsoft Windows 8 (Windows apps), which is used on both desktop PCs and tablet PCs, or Apple operating systems.

                        A special form of application software are web applications. These are accessed from the workstation or mobile device via a web browser and they run in the browser.
                          • RFO AquaCity SW - Management of remote reading metering devices

                          • Product description

                            Network and data management in one SW package


                            To achieve Aquacity system maximum performance a powerful software is needed that can manage the hardware network of remote reading devices as well as the information collected from the meters.

                            The software consists of 2 different blocks:

                            • Library and Service Machine, successfully manage communications with devices and meters.
                            • Online access WEB Interface, enables managing and making use of the data collected.

                            This software is specially designed to be installed on any server, without requiring big resources, and therefore optimizing costs of the AquaCity network exploitation. Each software block can be installed on different servers, and using the MSS+TxNCOM block the software can even be embedded in the client's software.
                          • RFO ITPS SW Evresys

                          • Tracking, geofencing and optimal security

                            Whether it's people or things, with Evresys you always know exactly where they are. With or without additional automatic features, Evresys saves you time, money and offers the reassuring security of being in control.

                            In industrial environments, the Evresys RTLS platform offers a wide range of innovative applications: Track & Trace, Geofencing and Lone Worker Protection ensure easier management of your assets and optimal safety for employees in the most challenging conditions.

                        • Fix Mounted Readers

                        • Fix installed UHF Reader

                          UHF reader for the installation at RFID gates or in combination with wall antennas or floor antennas. Read distance of 2 - 10 m. Communication via USB 2.0, standard Ethernet RJ45, GPRS or Wifi possible.

                          Either as pure reader or in combination with an integrated Linux processor board it allows local programming without additional external PC. GPRS or Wifi for simple data transmission optional.

                          Best for fix installations or as mobile solution e. g. charging of a truck, car transporter, mobile gates or sport events (Marathon etc.).
                            • RFO 1600 MI - Fix mounted 1600 mW UHF RFID Reader with integrated PC, WLAN, GPRS and 4 antenna connectors

                            • Specification
                              Area of application

                              • Facility Management
                              • Asset Management

                              Product description

                              UHF reader with integrated Linux CPU board


                              UHF reader for RFID gates in combination with wall or ground antennas. The integrated Linux CPU baord allows local programming without external computer.

                              GPRS or WLAN for easy data transfer

                              Read range of 2 - 10 m. Communication via USB 2.0, standard RJ45 Ethernet, GPRS or WLAN possible.
                            • RFO HC1500ETH - UHF RFID Reader with 1500 mW/4 antenna connectors and TCP/IP >10 m read range

                            • Specification
                              Area of application

                              • Facility Management
                              • Asset Management

                              Product description

                              Compact and powerful


                              The RFO HC1500ETH reader is an UHF multi protocol reader for long range applications (up to 10 m)*.

                              Power according to your needs

                              With programmable output power in 256 steps from 17 dBm to 32 dBm, the reader can detect tags up to 10 m of distance (depending on antenna and tag dimensions).

                              4 antenna connectors for various read points

                              The RFO HC1500ETH is ideal for customers who want to design their own RFID solution and require a long range RFID reader engine featuring up to 4 antennas.

                              ETSI certified

                              The RFO HC1500ETH is fully compliant to the European regulations ETSI EN 302 208 and ETSI EN 300 220 and supports Philips UCODE EPC 1.19, ISO 18000-6B, and EPC Class1 Gen2.
                              Stainless steel housing with IP66/67 protection class.

                              Made for healthcare application and sterile environment

                              The RFO HC1500ETH Reader was developed specifically for healthcare applications. The stainless steel housing meets the hygienic standards and is suitable to be used in this area with detergent.
                            • RFO HC1500ETH - UHF RFID Reader with 500 mW/1 antenna connector and TCP/IP >3 m read range

                            • Specification
                              Area of application

                              • Facility Management
                              • Cold Chain
                              • Asset Management
                              • Automotive
                              • Healthcare
                              • Industry
                              • Service and Maintenance

                              Product description

                              Compact and powerful


                              The RFO HC500ETH reader is an UHF multi protocol reader for long range applications (up to 3 m)*.

                              Power according to your needs

                              With programmable output power in 8 steps from 10 dBm to 27 dBm, the reader can detect tags up to 3 m of distance (depending on antenna and tag dimensions).

                              1 antenna connector for middle read range

                              The RFO HC500ETH is ideal for customers who require a middle read range RFID reader up to 3 m.

                              ETSI and FCC certified

                              The RFO HC500ETH complies with and can operate in both European and US regulatory environments and, due to its multiregional capabilities, it's ideal for integration in devices requiring compliance to different geographical regions.

                              Made for healthcare application and sterile environment

                              The RFO HC500ETH Reader was developed specifically for healthcare applications. The stainless steel housing meets the hygienic standards and is suitable to be used in this area with detergent.
                            • RFO 500USB - UHF RFID Reader with 500 mW/1 antenna connector and USB >3 m read range

                            • Specification
                              Area of application

                              • Facility Management
                              • Cold Chain
                              • Asset Management
                              • Automotive
                              • Industry
                              • Service and Maintenance

                              Product description

                              Compact and powerful


                              The RFO 500USB reader is an UHF multiregional compact reader for high performances UHF RFID applications.

                              Power according to your needs

                              With programmable output power in 8 steps from 10 dBm to 27 dBm, the reader can detect tags up to 3 m of distance (depending on antenna and tag dimensions).

                              1 antenna connector for middle read range

                              The RFO 500USB is ideal for customers who require a middle read range RFID reader up to 3 m.

                              ETSI and FCC certified

                              The RFO 500USB complies with and can operate in both European and US regulatory environments and, due to its multiregional capabilities, it's ideal for integration in devices requiring compliance to different geographical regions.
                            • RFO Gimly 500USB - Extremely compact UHF RFID Reader with 500 mW/1 antenna connector and USB >3 m read range

                            • Specification
                              Area of application

                              • Facility Management
                              • Cold Chain
                              • Asset Management
                              • Automotive
                              • Industry
                              • Service and Maintenance

                              Product description

                              Compact and powerful


                              The RFO Gimly 500USB reader is an UHF multiregional compact reader for high performances UHF RFID applications.

                              Power according to your needs

                              With programmable output power in 8 steps from 10 dBm to 27 dBm, the reader can detect tags up to 3 m of distance (depending on antenna and tag dimensions).

                              1 antenna connector for middle read range

                              The RFO Gimly 500USB is ideal for customers who require a middle read range RFID reader up to 3 m.
                            • RFO 1500RS - UHF RFID Reader with 1500 mW/4 antenna connectors and RS232 >10 m read range

                            • Specification
                              Area of application

                              • Facility Management
                              • Asset Management

                              Product description

                              Compact and powerful


                              The RFO 1500RS reader is an UHF multi protocol reader for long range applications (up to 10 m)*.

                              Power according to your needs

                              With programmable output power in 256 steps from 17 dBm to 32 dBm, the reader can detect tags up to 10 m of distance (depending on antenna and tag dimensions).

                              4 antenna connectors for various read points

                              The RFO 1500RS is ideal for customers who want to design their own RFID solution and require a long range RFID reader engine featuring up to 4 antennas.

                              ETSI certified

                              The RFO 1500RS is fully compliant to the European regulations ETSI EN 302 208 and ETSI EN 300 220 and supports Philips UCODE EPC 1.19, ISO 18000-6B, and EPC Class1 Gen2.
                            • RFO AIO1919 500ETH - UHF RFID Reader/Antenna combination with 500 mW and TCP/IP >3 m read range

                            • Specification
                              Area of application

                              • Facility Management
                              • Asset Management

                              Product description

                              Compact and powerful

                              The RFO AIO (All in One) 3030-1500ETH reader is an UHF multiregional compact reader with a circular polarized antenna (305 x 305 mm) for high performances UHF RFID applications.

                              Power according to your needs

                              With programmable output power in 256 steps from 17 dBm to 32 dBm, the reader can detect tags up to 10m of distance (depending on antenna and tag dimensions). 3 more antennas according to your needs can be connected.

                              Reading under most difficult circumstances

                              The radio frequency core of the module allows to achieve fast reading/writing and operation in dense reader and dense tag environments for top-class rated performances.

                              Ethernet or RS232 (optional)

                              Der RFO AIO 3030-1500ETH is delivered with a TCP/IP interface. On request it can be equipped with a RS232 interface.
                            • RFO AIO3030 1500ETH - UHF RFID Reader with 1500 mW/4 antenna connectors and TCP/IP >10 m read range

                            • Specification
                              Area of application

                              • Facility Management
                              • Cold Chain
                              • Asset Management
                              • Automotive
                              • Healthcare
                              • Industry
                              • Service and Maintenance

                              Product description

                              Compact and powerful


                              The RFO AIO (All in One) 1919-500ETH reader is an UHF multiregional compact reader with a circular polarized antenna (190 x 190 mm) for high performances UHF RFID applications.

                              Power according to your needs

                              With programmable output power in 8 steps from 10 dBm to 27 dBm, the reader can detect tags up to 3 m of distance (depending on tag dimensions).

                              Reading under most difficult circumstances

                              The radio frequency core of the module allows to achieve fast reading/writing and operation in dense reader and dense tag environments for top-class rated performances.

                              Ethernet or RS232 (optional)

                              Der RFO AIO 1919-500Eth is delivered with a TCP/IP interface. On request it can be equipped with a RS232 interface.
                            • RFO 1600 MI

                            • The RFO QT1400 is a compact long range RAIN RFID reader of the easy2read© product line, well suited for retail and warehousing installations.

                              31.5 dBm enough power for any application

                               The RFO QT1400 has 4 antenna ports capable of a 31.5 dBm maximum power enabling to build RAIN RFID portals for long range reading. Its slim form factor makes it easy to install even when limited space is available. It offers the Ethernet (PoE) and USB communication interface in order to simplify the installation both on large and single read point solutions. The Power over Ethernet capability permits to provide power and to communicate with the reader with a single cable

                            • RFO-LF AML FIX550

                            • Patented Autotuning function for simple integration

                              The new RFO-LF AML-FIX550 is much less sensitive against electrical interference and metal in the environment. In combination with the patented Autotuning function they offer a simple installation and more easy integration in all types of applications.

                              In addition to the standard RS232 and RS485 interfaces optional Ethernet and Bluetooth modules are offering the whole range of modern communication. An outstanding feature is the multiplexing of up to 8 Antennas with the optional multiplexing units.

                            • RFO-LF AML FIX650

                            • Polivalent connectivity Ethernet, Wi-Fi and Bluetooth

                              It offers a higher power output and therefore a longer read range and supports larger antenna panels. Another outstanding feature is the adjustable power output. With the RS232 and RS485 interfaces and the optional Ethernet, Wi-Fi and Bluetooth modules it offers the whole range of modern communication. The controller for the 4x and 8x multiplexers is already integrated and allows optional multiplexing units for up to 8 Antennas.

                            • RFO-AIO2020 UHF

                            • All in One Reader with up to 1000mW

                              The RFO AIO2020 adopts Impinj R2000 module, Max. power output is 30dbm.

                              Built-in narrow band 6dbi circular polarization antenna, reading distance up to 6 meters.

                              Highlights:
                              • Reading speed is 400tags/s
                              • Standard interfaces as RJ45, RS232, GPIO_IN*1, GPIO_OUT*2,meet different client's requirements.
                              • Standard power supply is 12V DC. Optional power supply is POE and 12VDC.
                              • Built-in hardware watchdog and interface protection circuit, suitable for complex industrial application environment.
                          • Sensors

                          • This technology is one of the basic elements of the M2M solutions. Sensors enable the capture/collection of values that can be measured. These values are converted into digital data and can then be electronically recorded and processed.

                            Various Sensors are used everywhere where the circumstances seem useful or where a dedicated (geography or infrastructure) or human intervention is not possible. The reasons and applications may diverse when to use sensors.
                              • RF WS TMP01 - Wireless Temperature Sensor uses a thermistor to accurately measure temperatures

                              • Specification
                                Area of application

                                • Facility Management

                                Product description

                                Wireless temperature sensors use a thermistor to accurately measure temperatures. These sensors are perfect for monitoring ambient temperatures around the sensors physical location. User customization allows you to set the frequency of readings and the ability to set thresholds for alerts via SMS text and/or email.
                              • RF WS HUM01 - Humidity Sensor allows you to monitor the relative humidity of greenhouses

                              • Specification
                                Area of application

                                • Facility Management

                                Product description

                                Humidity sensors allow you to monitor the relative humidity of the air within a room or enclosure. Ideal for monitoring humidity within greenhouses, industrial spaces, museums, saunas and humidors. They can also be used for residential applications such as controlling mold, mildew or dust mites.
                              • RF WS ACT01 - Acceleration Sensor for measurement of shock, vibration, inclination etc.

                              • Specification
                                Area of application

                                • Facility Management

                                Product description

                                Wireless acceleration sensor can be used in a variety of applications in the want to shock, vibration, tilt measure etc.

                                The wireless acceleration/tilt sensor is activated at a set time interval (defined by user) and converts acceleration measurements to in pitch and roll values (0 to 180 ° -> -180 ° to 0 °). The data is displayed in increments of 0.1 ° degree resolution.
                              • RF WS DRC01 - Wireless Dry Contact Sensor to detect contacts between 2 contact points

                              • Specification
                                Area of application

                                • Facility Management

                                Product description

                                Wireless dry contact sensors can be used to detect contact between two wired contact points. This sensor can be used with an external mechanical switch or a contact plate to alert the user via SMS text and/or email when the contacts touch or a switch is triggered.
                              • RF WS IMO01 - Wireless Motion Sensor uses an infrared sensing technology to detect objects

                              • Specification
                                Area of application

                                • Facility Management

                                Product description

                                Wireless motion sensors use an infrared sensing technology to accurately detect movements made by people/animals within 16.4 ft (5 m) range. User customization allows you to receive notifications by SMS text or email the instant motion is detected.
                              • RF WS OCL01 - Wireless Open/Closed sensor provides information on the status of doors, windows etc.

                              • Specification
                                Area of application

                                • Facility Management

                                Product description

                                Wireless open/closed sensors provide information on the status of doors, windows, cabinets etc. Know if a building or area is being accessed when it should not be, or if a door or window has been left open. Alerts can be setup to notify a user by SMS text, email or voice call if a door or window has been opened or left open.
                              • RF WS WDT01 - Wireless Water Sensor alerts you via SMS text and/or email when there is water detected

                              • Specification
                                Area of application

                                • Facility Management

                                Product description

                                Wireless water sensors alert you via SMS text and/or email when there is water detected, preventing potential property damage that results from flooding or leaks. Place this sensor anywhere flooding or faulty plumbing could cause a problem. This sensor can also be used to detect a lack of water, allowing you to know when a container is nearing empty.
                              • RF WS VME01 - Wireless Voltage Meter is capable of measuring the voltage of another device

                              • Specification
                                Area of application

                                • Facility Management

                                Product description

                                Wireless voltage meters are capable of measuring the voltage of another device, battery or sensor. This sensor is capable of measuring voltage up to 500 VAC/VDC by connecting the leads on the sensor to the positive and ground terminals of the device being measured.

                                Examples of interfacing devices include, but are not limited to: Strain Gauge, Pressure Transducer, RTD, Thermistor or Thermocouple, Piezo Electric sensors, Photoresistor, Industrial Accelerometer, any kind of variable resistor, any kind of sensor that outputs a voltage etc. If the device being measured is passive, the user must supply their own excitation voltage, as the Monnit sensor is really just a “voltage observer”.
                              • RFO SP 50 - Wireless Temparture/Humidity sensor for precise measuring

                              • Specification
                                Area of application

                                • Facility Management
                                • Cold Chain

                                Related products
                                • RFO DB 100
                                • RFO GW 3G

                                Product description

                                Wireless temperature and/or humidity sensor to accurately measure precise datas. This sensor is perfect for monitoring ambient temperatures and/or humidity around the sensors physical location. User customization allows you to set the frequency of readings and the ability to set thresholds for transmission to the server/application. Once the data has been received actions can be prepared.
                            • Data Bridges/Repeater

                            • Data Bridges/Repeater are used in the wireless sensor network infrastructure. Together with a gateway/data transmitter they create a multi hop mesh network that is completely autonomous.

                              In a multi hop mesh network data bridges/repeater can transmit messages to the gateway/data transmitter by forwarding messages to each other.

                              The data bridges/repeater enable an extension of the network range in case the wireless data loggers cannot communicate directly with the gateway/data transmitter because of range impediments.
                                • RFO DB 100 Data Bridge - Data Bridge/Repeater for extension of meshed networks

                                • Specification
                                  Area of application

                                  • Facility Management
                                  • Cold Chain
                                  • Asset Management

                                  Product description

                                  The RFO DB 100 Data Bridge is a data repeater in the wireless sensor network infrastructure. Together with an RFO GW 3G and the RFO SP100 create a network multi-hop network, which is operated completely autonomous.

                                  In a multi-hop mesh network data to and from the Briges Gatways can transmit and/or forward messages.

                                  The Data Bridges allow an extension of the network portion of the case, the sensors can not directly communicate with the gateway, due to geographical distances or obstructions. Several Databriges can be coupled in a row.

                                  Data transmission

                                  The network infrastructure is completely autonomous. The Data Bridge only requires a power supply. Umgebungsbedigungen within a facility or storage space to change. Freight movements by fork truck, truck loading and Entladestellenoder other operational barriers. The redundancy and flexibility of the network is ensured, as the infrastructure at any time is able unsupervised changes to cope.

                                  Applications

                                  Data Bridges / Repeaters are used together with gateways / Data Transmitter as a network interconnection. This infrastructure supports sensors / Data Collector used as wireless data logger. This allows the sensor data are forwarded within minutes of recording to transfer to the server.

                                  The RFO GW 3G is ideal for the pharmaceutical wholesalers and logistics companies that handle temperature-sensitive cargo. This network-compatible device can be installed and used with the sensors and Data Bridges inter alia in the following applications in combination :

                                  Real-time monitoring: The RFO DB 100 in conjunction with the RFO GW 3G Gateway is mainly used for real-time monitoring of static temperature controlled storage areas and facilities.


                                  The devices transmit the information from the sensors/Data Collector. These are fitted in the cold rooms or areas, and thus the data is directed to the Data Bridges/Repeaters and Gateways/Data Transmitter and further to the database/server in order to be used on the specific application.
                                • RFO RU 500 Data Bridge - Autonomous Data Bridge for extension of meshed networks

                                • Specification
                                  Area of application

                                  • Facility Management
                                  • Water Management
                                  • Smart Metering
                                  • Cold Chain
                                  • Asset Management

                                  Product description

                                  Autonomous with solar panels and rechargeable batteries


                                  The RFO RU500 allows connection to remote units in places with orographic difficulties, out of the network of meshed communication irrigation area.

                                  1. Monitoring of internal and supply parameters, temperature etc.
                                  2. Alarms associated with monitoring internal parameters
                                  3. Spontaneous alarm system with retries
                                  4. Reading and storage alarms
                                  5. Reading and event storage
                                  6. Update firmware remotely.

                                  Possible installation scenarios

                                  Metal mast 6 meters: It will be anchored to the chest or fire hydrant through clamps and will be the guide for wiring from the RF module batteries and sensors.
                                  Kit ABS material for housing the electronics remote. It is used as RF envelope.
                                  Support Plate Solar: Solar panels 5 W or 3 W.
                                  Battery Pack: Can be used for certain battery models rechargeable or lithium.
                                  Housing: This waterproof case is charged and the battery case necessary extensions to the remote communications conform to the configuration of the caskets.
                                • RFO LEP01 Data Bridge - Autonomous Data Bridge for extension of metering networks

                                • Specification
                                  Area of application

                                  • Facility Management
                                  • Smart Metering

                                  Related products
                                  • RFO GW04

                                  Product description

                                  Autonomous with solar panels and/or rechargeable batteries

                                  The RFO Line End Point (LEP01) is a communications device for data transmission in a radio network in the free ISM bands - Industrial, Scientific and Medical – 169 MHz, 433 MHz, 868 MHz or 915 MHz that allows to gather metering information from radio meters and bus cable meters.

                                  To provide a solution to needs associated to the reading and control of water meters, the AquaCity system integrates radio frequency modules with high sensitivity and low current consumption.

                                  The devices gather the readings directly from the meters, making use of different metering protocols adequate for each type of meter, encoding the information and sending it under AquaCity Gateway request.

                                  System functionality

                                  Stand alone intelligent devices with the capacity to obtain data from different types of water meters making use of different radio frequency protocols such as WAVENIS, WirelessMbus (UNE13575) or cable protocols such as UNE82326.
                                  • Intelligent communications management to accomplish 100 % of the readings programmed
                                  • Over 10 years lifetime with interchangeable batteries of great capacity, which allow total flexibility to the installation
                                  • Remote firmware upgrading
                                  • Automatic low battery detection and safe switching to standby system
                                  • Warnings associated to monitoring of internal parameters
                                  • Monitoring of different internal parameters such as battery level, schedule, temperature etc.
                                  • Reading and storage of warnings
                                  • Ultra low consumption device
                                  • Reading and storage of events
                                  • Masking of warnings
                                  • Possibility to customize the enclosure based on needs.
                                • RFO LEP02 LoRa Data Bridge - Autonomous Data Bridge with LoRa for metering networks

                                • Specification
                                  Area of application

                                  • Facility Management
                                  • Smart Metering

                                  Related products
                                  • RFO GW08

                                  Product description

                                  Autonomous with solar panels and/or rechargeable batteries

                                  The RFO Line End Point (LEP01) is a communications device for data transmission in a radio network in the free ISM bands - Industrial, Scientific and Medical – 169 MHz, 433 MHz, 868 MHz or 915 MHz with LoRa TM Modulation that allows to gather metering information from radio meters and bus cable meters.

                                  To provide a solution to needs associated to the reading and control of water meters, the AquaCity system integrates radio frequency modules with high sensitivity and low current consumption.

                                  The devices gather the readings directly from the meters, making use of different metering protocols adequate for each type of meter, encoding the information and sending it under AquaCity Gateway request.

                                  System functionality

                                  Stand alone intelligent devices with the capacity to obtain data from different types of water meters making use of different radio frequency protocols such as WAVENIS, Wireless Mbus (UNE13575) or cable protocols such as UNE82326.
                                  • Intelligent communications management to accomplish 100 % of the readings programmed
                                  • Over 10 years lifetime with interchangeable batteries of great capacity, which allow total flexibility to the installation
                                  • Remote firmware upgrading
                                  • Automatic low battery detection and safe switching to standby system
                                  • Warnings associated to monitoring of internal parameters
                                  • Monitoring of different internal parameters such as Battery level, schedule, temperature etc.
                                  • Reading and storage of warnings
                                  • Ultra low consumption device
                                  • Reading and storage of events
                                  • Masking of warnings
                                  • Possibility to customize the enclosure based on needs.
                              • Data collector

                              • A well selected range of DataCollector products for simple and efficient capture of RFID data.
                                  • RFO WRx Micro UHF

                                  • The RFO WR100 support the following operating system: iOS, Android, Windows, Linux in white or black housing.

                                    Small but lots of power

                                    The RFO WRx Micro is a newly-developed wearable UHF reader that enables read distance of 9m. By adapting the wrist strap or arm strap, it can be attached to a mobile phone, tablet and other devices by magnetic attachment.It features removable battery, performs data transmissionvia Type C USB and enables user information / interaction via Bluetooth coordinated with an APP or SDK.

                                  • RFO WR 100 UHF - Light and ergonomic wristband reader (UHF) with BT data transmission

                                  • Simple and fast!

                                    The AGX Speedy150 is a data collector compliant with UHF RFID ISO 18000-6C/EPC C1G2 standards.


                                    The AGX Speedy150 has an integrated antenna suited for short to medium range applications and, thanks to the Bluetooth® communication interface, it is a perfect UHF RFID add-on for any Bluetooth® enabled host such as a PC, a smartphone, a PDA or a tablet. The reader is compatible with Windows XP/7, Windows CE/Mobile, Android, iPhone and iPad.

                                  • RFO WRx Micro UHF

                                  • The RFO WRx Mini talks to everybody

                                    It features removable battery, performs data transmission via Type C USB, and enables user information interaction via Bluetooth coordinated with APP or SDK.

                                    The RFO WRx Mini is a newly-developed wearable UHF reader that enables read distance of 9m.

                                    It can be worn like a wrist watch

                                    By adapting wrist strap or arm strap, it can be attached to mobile phone, tablet and other devices by magnetic attachment.

                                • Watering Systems

                                • Autonomous or remotely managed irrigation system to control pumps including comprehensive error detection and the complete visualization of data.

                                  A professional irrigation automation system, ie an automated water supply, is professionally used in horticulture, vegetable cultivation and cultivation of ornamental plants, in open-air cultivations as well as under glass (greenhouses), in many plant cultivations. Also in the public area, in gardens, parks, in the greening of noise barriers.

                                  The automatic system has to decide whether water is needed, how much water is given and, if necessary, whether liquid fertilizer is to be distributed. For this purpose, sensors, timer and programs - adapted to the respective water distribution system - are combined in such a way that the plants grow optimally. At the same time, the water consumption is to be minimized and fertilization should be adapted to the actual needs of the plants.
                                      • RFO ICS 816 - Autonomous Irrigation Control System

                                      • Specification
                                        Area of application

                                        • Water Management
                                        • Industry

                                        Related products
                                        • RFO RU500 Data Bridge

                                        Product description

                                        The professional on irrigation automation


                                        The RFO ICS816 is the new irrigation control system which after many studies and tests exceeds limitations of current systems.
                                  • Gateways

                                  • The full range of all products consists of a wireless network infrastructure, including data bridges/repeater and gateways/data transmitters, in combination with intelligent sensors also called data collector.

                                    The Gateway is the central reading device which forms the wireless network infrastructure together with the data brigde/repeater.

                                    The Gateway controls directly or through the Repeater a completely autonomous multi-hop wireless mesh network.
                                      • RFO GW 3G Gateway - Gateway to transmit wireless collected data from sensors/RFID tags

                                      • Specification
                                        Area of application

                                        • Facility Management
                                        • Cold Chain
                                        • Asset Management

                                        Product description

                                        The RFO GW 3G Gateway is suitable for deployments where existing internet infrastructure is unavailable or not permitted.

                                        It provides ‘plug and play’ deployment requiring no experience or additional confi guration. The RFO GW 3G includes a modem that combines 3G and GPS. As a result, the RFO GW 3G functions as a stand-alone product requiring only a power source.

                                        Furthermore, the RFO GW 3G includes an internal back-up battery that allows for up to 72 hours operation when main power is not available.

                                        Data transmission

                                        Sensors wirelessly transmit their sensor data to the RFO GW 3G Gateway directly or via databridges/router that extend the range of wireless communication. From the RFO GW 3G, the sensor measurements are securely communicated to the central server web application using 3G communication. This enables an integrated real-time view on shipments and storage facilities.

                                        Applications

                                        The RFO GW 3G is ideally suited for pharmaceutical distributors and logistics companies that handle temperature-sensitive cargo. This network component can be installed and deployed in combination with the Sensors and Databridges for the following applications:

                                        Shipment monitoring: The RFO GW 3G will read-out the temperature information from the smartPoints that have been attached on the high-sensitive shipments.

                                        Facility monitoring: When placed inside storage facilities, the RFO GW 3G will ensure the continuous monitoring (humidity or temperature or both) of the facility.

                                        Vehicle monitoring: The RFO GW 3G can be placed inside vans or trailers together with sensors to continuously collect temperature information while in transit.
                                      • RFO GW 04 Gateway - Autonomous Gateway to transmit wireless (GFSK) collected data from water meters

                                      • Specification
                                        Area of application

                                        • Water Management
                                        • Smart Metering
                                        • Related products
                                        • RFO LEP 01

                                        Product description

                                        Autonomous due to solar panes and batteries


                                        The RFO Gateway (GW 04) is a communications device for data transmission in a radio network in the free ISM bands - Industrial, Scientific and Medical – 169 MHz, 433 MHz, 868 MHz or 915 MHz that allows data collection of readings made by the LEP devices.

                                        Using a GPRS access, this device can communicate in realtime with any device of the remote reading fixed network at any moment.

                                        This is possible due to the intelligent management of battery level and of communications, managing the IPs assigned by phone operators, which enables the devices to stay functional 100 % of the time.

                                        The battery and solar panel GW version integrates a very efficient charging regulator that keep the batteries in floating charge with as little light as that coming from a streetlight.

                                        System functionality
                                        • Can manage up to 2000 meters collecting the data obtained.
                                        • Can manage hour schedules for the readings programmed of the LEP devices using the ISM bands without additional communication charges.
                                        • Intelligent communications management to accomplish 100 % of the readings programmed.
                                        • Over 10 years life time thanks to solar panel, rechargeable batteries and high performance battery charger specially designed for this use.
                                        • Automatic low battery detection and safe switching to standby system.
                                        • Warnings associated to monitoring of internal parameters.
                                        • Monitoring of different internal parameters such as battery level, schedule, temperature etc.
                                        • Reading and storage of warnings
                                        • Reading and storage of events
                                        • Remote firmware upgrading
                                        • Masking of warnings
                                        • Possibility to customize the enclosure based on needs
                                        • Data encryptation
                                        • Ultra low consumption device.
                                      • RFO GW 08 LoRa TM Gateway - Autonomous Gateway to transmit wireless (LoRa TM) collected data from water meters

                                      • Specification
                                        Area of application

                                        • Water Management
                                        • Smart Metering
                                        • Related products
                                        • RFO LEP 02

                                        Product description

                                        Autonomous due to solar panes and batteries


                                        The RFO Gateway (GW 08) is a communications device for data transmission in a radio network in the free ISM bands - Industrial, Scientific and Medical – 169 MHz, 433 MHz, 868 MHz or 915 MHz with LoRaTM Modulation that allows data collection of readings made by the LEP devices.

                                        Using a GPRS access, this device can communicate in realtime with any device of the remote reading fixed network at any moment.

                                        This is possible due to the intelligent management of battery level and of communications, managing the IPs assigned by phone operators, which enables the devices to stay functional 100 % of the time.

                                        The battery and solar panel GW version integrates a very efficient charging regulator that keep the batteries in floating charge with as little light as that coming from a streetlight.

                                        System functionality
                                        • Can manage up to 2000 meters collecting the data obtained
                                        • Can manage hour schedules for the readings programmed of the LEP devices using the ISM bands without additional communication charges
                                        • Intelligent communications management to accomplish 100 % of the readings programmed
                                        • Over 10 years life time thanks to solar panel, rechargeable batteries and high performance battery charger specially designed for this use
                                        • Automatic low battery detection and safe switching to standby system
                                        • Warnings associated to monitoring of internal parameters
                                        • Monitoring of different internal parameters such as battery level, schedule, temperature etc.
                                        • Reading and storage of warnings
                                        • Reading and storage of events
                                        • Remote firmware upgrading
                                        • Masking of warnings
                                        • Possibility to customize the enclosure based on needs
                                        • Data encryptation
                                        • Ultra low consumption device
                                      • RFO BLEGW01

                                      • RFO-BLEGW01 Gateway with Ethernet, Wifi or LTE

                                        The Gateway locates BLE devices and allows you to receive alarms and status information from these devices.

                                        It is possible to realize a complete BLE network or to strengthen an existing BLE network.

                                        The gateway is easy to install. You simply mount it on the wall. It is also possible to place it on the wall, ceiling or profile of a suspended ceiling using the magnetic mounting kit.

                                      • RFO-BLEGW02

                                      • RFO-BLEGW02 Gateway with Ethernet and Wifi

                                        The Gateway locates BLE devices and allows you to receive alarms and status information from these devices.

                                        It is possible to realize a complete BLE network or to strengthen an existing BLE network.

                                        The gateway is easy to install. You simply mount it on the wall. It is also possible to place it on the wall, ceiling or profile of a suspended ceiling using the magnetic mounting kit.

                                    • Indoor Tracking & Positioning Systems

                                    • 2.4 GHz reader with Ethernet connection 4GHz or 5GHz for in-house localization of objects, goods and persons.

                                      A particularly flexible technology is the use of local radio cells as used in the Indoor Tracking & Positioning System (ITPS). Alternatively, this technology is also referred to as RTLS (Realtime Locating System).

                                      It can be combined with GPS Tracking so that it is valid for indoor AND outdoor Tracing & Tracking!

                                        • RFO-HCPC01

                                        • BLE Pull Cord Device

                                          Easy and fast installation in bathrooms or toilets

                                          EASE OF USE

                                          To alarm, the client or employee pulls the cord.

                                          The drawstring is easy to install. You can easily mount it and cables are not necessary.

                                          It is completely waterproof so it is not a problem if it gets wet.

                                        • RFO-HCWT01

                                        • BLE Wall Transmitter

                                          Easy and quick Alarm at a personal place

                                          EASE OF USE

                                          To alarm, the client or employee presses the alarm button. This is easy to press, which makes it also user-friendly for users with a reduced pressure force.

                                          The transmitter is easy to install. You can easily mount it and cables are not necessary.

                                        • RFO-HCTT01

                                        • BLE Table Transmitter

                                          Easy alert anywhere you want

                                          EASE OF USE

                                          To alarm, the client or employee only needs to touch the alarm button. This also makes it user-friendly for users with a reduced pressure force. When touched, the user receives feedback by means of a vibration function and an acoustic signal.

                                          You can use the transmitter as a mobile alarm button or mount it at a fixed location. For example on a table or wall.

                                        • RFO BC01

                                        • With this BLE BEACON you can easily track and locate assets such as tool cases, goods containers, forklifts and other high -quality devices.

                                          You can easily fix the BLE Beacon on the asset that you want to follow.

                                          It is possible to realize a complete BLE-Beacon network or to strengthen and extend an existing BLE-Beacon network.

                                        • RFO BC01

                                        • RFO-BC01 Request for quotation via email Related products BLE Gateway RFO-BLEGW01 BLE Gateway RFO-BLEGW02 ITPS SW Evresys Product description RFO-BC01 Healthcare BLE Beacon Simply follow your assets Ease of use With this beacon you can easily follow and localize assets such as wheelchairs, beds and other (medical) equipment. You can easily stick the beacon or screw it on the asset that you want to follow.

                                          It is possible to realize a complete BLE-Beacon network or to strengthen and extend an existing BLE-Beacon network.

                                        • RFO-AXXS-Control-System

                                        • Flexible control of the number of people in buildings

                                          With the AXXS Control System, you get flexible RFID monitoring to comply with official requirements for a defined number of people in objects and buildings.

                                          The AXXS Control System was designed in such a way that it can be used in different access situations. Thanks to the modularity of the individual components (PC, monitor and RFID reader), very slim solutions can be built that manage with a minimal number of devices and thus save your budget.

                                      • Tablet PCs

                                      • Mobile tablet PC in combination with RFID reader (LF, HF and UHF) is the best solution when a bigger display is needed in a mobile application.Touch monitors simplify the interactive data processing through easy operation and intuitive handling.
                                          • RFO Mesa 3 (Android)

                                          • The Mesa 3 Rugged Tablet running Android 9.0 offers powerful new functionality while retaining impressive features from the popular Mesa 2 Rugged Tablet. Its Octa-core Snapdragon processor by Qualcomm is ready to run even the most demanding field data collection application, and its rugged ergonomic design is ready to handle a long day on the job in some of the harshest environments out there. Ready to experience Juniper Rugged?
                                          • RFO CW80

                                          • The RFO TPC 8 Tablet PC is a robust and powerfully equipped Tablet PC. This robust Tablet PC with 8" touchscreen, high performance and low power consumption has an Intel® Atom™ Bay Trail quad-core processor integrated.

                                            With options such as a 1D/2D barcode scanner, magnetic card reader, chip card reader, RFID (LF/HF/UHF) and 13 MPixel camera, this robust device offers problem-free information gathering that can be forwarded immediately.

                                          • RFO 8X RFID

                                          • The RFO-8X can be equipped with any passive RFID technology. Thus, it leaves nothing to be desired, even in a modern industry! LF, HF and UHF can be integrated into the RFO-10X. The RFO-8X brings the expandability, modularity and versatility you would expect from a powerful device.
                                          • RFO 10X RFID

                                          • The RFO-10X can be equipped with any passive RFID technology. Thus, it leaves nothing to be desired, even in a modern industry! LF, HF and UHF can be integrated into the RFO-10X. The RFO-10X brings the expandability, modularity and versatility you would expect from a powerful device.
                                          • RFO RT8 RFID

                                          • The RFO-RT8 can be equipped with HF/NFC and as a separate device with UHF passive RFID technology. Thus, it leaves nothing to be desired, even in a modern industry! HF/NFC is integrated into the RFO-RT8. The RFO-RT8 brings the expandability, modularity and versatility you would expect from a powerful device.
                                          • RFO TPC8S RFID

                                          • The RFO-TPC8S Tablet PC with Android OS 10.0 is an industrial Tablet PC. Inside this compact Tablet PC with a sealing level of IP67 water/dust proof, 1.2 m drop survival, ergonomic design, over molding structure, extremely large internal 8000mAh battery and 8.0 inch tough Gorilla Glass 3 screen are all equipped to ensure performance.

                                            Fast 2.0GHz octa core processor 2GB RAM/16GB ROM or 4GB RAM/64 GB ROM and up to 256GB expansion are all designed to boost up experience level.

                                          • RFO RT10 RFID

                                          • For everything from information transfers to video streams

                                            The Qualcomm Snapdragon 480 5G is a long-life processor with series-defying performance for upgraded downtime while making the connections that count most.

                                            The largest and brightest screen on an Android Tablet. Small size and light weight.

                                          • RFO Mesa 3 (Windows 10)

                                          • The Mesa 3 Rugged Tablet running Android 9.0 offers powerful new functionality while retaining impressive features from the popular Mesa 2 Rugged Tablet. Its Octa-core Snapdragon processor by Qualcomm is ready to run even the most demanding field data collection application, and its rugged ergonomic design is ready to handle a long day on the job in some of the harshest environments out there. Ready to experience Juniper Rugged?
                                        • Accessories

                                        • Selected high quality accessories and options for different products or applications.
                                            • RFO PV230 (PolyVan)

                                            • Always on the spot: From incoming and outgoing goods to production over to mobile data collection.
                                              The PolyVan 230 is ideal for flexible data processing in logistics and industrial environments. Indipendent from the power supply system it allows the acquisition of goods and production data, as well as the printing of labels and documents onsite. This significantly reduces unneeded trips back and forth. The mobile workstation can acomodate - depending on the model - an industrial PC, barcode scanners, sensors, data bridges, gateways, RFID Reader/antennas or printers.
                                            • RFO Handheld & PDA Cases

                                            • Robust belt pouches and accessories for Casio, Cipherlab, Datalogic, Denso, Handheld, Honeywell, Intermec, LXE, M3, Motorola, Zebra, Newland, PSION, Symbol, Unitech, Zebra and other devices. With and without a pistol grip.

                                              Systematic scanner bags & GunGrip holsters

                                              Belts and holster bags for daily use in a rough and professional environment. Technically sophisticated, functional and robust with wearing comfort and shock protection.

                                            • RFO Handheld & PDA Cases

                                            • Handheld devices and PDAs can be worn on the body with this special harness. All 3 straps can be individually attached to the bag.

                                              The 3 straps can be adjusted to different sized carriers and hold the bag and device securely and reliably with anti-slip protection.

                                              This allows the device to be positioned ergonomically on the body. This harness can be attached to all standard bags from our range

                                            • Datalogic Belt bag & Cases

                                            • Robust belt bags and accessories for Datalogic ELF, Memor, Kyman, Scorpio und Falcon (with Grip).

                                              Leather and synthetic bags

                                              Belt and holster bags for everyday use in a harsh and professional environment. Technically sophisticated, functional and sturdy with comfort and impact protection.

                                            • RFO Universal Shoulder Holster

                                            • Robust shoulder holster and harness for Datalogic, Motorola, LXE, Intermec, Psion, Honeywell, Nordic-ID, tt netcom, ATID, Handheld Products, Cyperlab and many more.
                                          • Technologies M2M / IoT / RFID / GPS Tracking

                                          • "State of the art" M2M / IoT / GPS Tracking / RFID technologies - the starting point of a complete process chain!

                                            M2M / IoT / RFID / GPS Tracking solutions mainly consist of 2 basic concepts (data capture & data transmission).
                                            First you need technologies that can detect or cature data. This can be done with a variety of electronic devices were RFID and sensor technology are the basic technologies.

                                            The next technology results in data communication. Here we distinguish between the so-called Data Bridges/Repeater (devices which merge the data from the various data capture devices) and Data Transmitters (Repeater & Gateways). Collected data is then forwarded from the data transmitter, both wireless and wired, into the appropriate place (database management software). These data are now being used to make appropriate conclusions such as statistics, action plans, interventions, statements, remote adjustments etc.

                                              • Technologies

                                                  • RFID passive

                                                  • Passive tags will be activated from the Reader and will transmit their UID (Unique Identification No) back. Depending on the application, data can be read from the memory or written into it.
                                                  • RFID active

                                                  • Active tags have compared to passive tags the difference that they can SEND data in defined time intervals. Since they have an own power source (battery) they can reach very long read ranges which can go far beyond 100 m.
                                                  • Sensors passive

                                                  • Passive sensor technology allows data collection/detection at the moment of the query. This allows a data collection at a defined time. This is controlled by the system (server), which thus activates to the reader. This reads the data at the desired moment and redirects it to the server/database.

                                                    This technology allows a "real time" measurement and provides timely information about the state of the measured object/device. Due to the batteryless operation no consequential costs or failures due to lack of energy are possible.
                                                  • Sensoring active

                                                  • The difference between active and passive sensors is the battery powered technology of the active components for data collection / detection. This allows a data collection over a defined period of time. Thus conclusions can be drawn about the development of the measured data.

                                                    These can be very important to define / start appropriate decisions / actions. Furthermore, a battery-operated sensor also functions as a transmitter with considerably greater range than a passive sensor (without battery).
                                                  • Gateways

                                                  • The Data Transmitter / Gateway is the central data management device which forms the wireless network infrastructure together with the data brigde / repeater.
                                                  • Data Bridges/Repeater

                                                  • The data bridges/repeater enable an extension of the network range in case the wireless data loggers cannot communicate directly with the gateway/data transmitter because of range impediments.
                                                • Application Areas M2M / IoT

                                                • The M2M / IoT application areas are as different as the required data that is needed. As a rule, application areas are named and grouped according to the main theme.

                                                  Each M2M / IoT application has its own specific characteristics and priorities. The solution will refer and adapt to it and should allow to expand if needed. The products required in each case are designed for and matched exactly to it.
                                                    • Applications

                                                        • Facility Management

                                                        • Management of buildings, facilities and facility equipment.
                                                          Facility management, also called property management, refers to the management and management of buildings as well as their technical equipement and installations.

                                                          Facility Management (FM), as a secondary process, ensures long-term preservation or an increase in the assets of companies in the form of buildings, facilities and according equipement.

                                                          This includes technical, infrastructural and commercial tasks, such as monitoring of building services, organizing and commissioning of building services, preparation of tender documents for conversion and maintenance as well as procurement management for all commodities, from energy to the advertising medium.

                                                          Technologies and solutions (RFID, sensors, data transmission) with the task of monitoring and controlling these facilities are used in the context of globalized administration.
                                                        • Water Management

                                                        • Autonomous availability and subsequent distribution of water/fertilizer.
                                                          Autonomous or remote controlled system for supervision / controlling pumps, including comprehensive fault detection and complete visualization of data.

                                                          A professional irrigation automation system, ie an automated water supply, is professionally used in horticulture, vegetable cultivation and cultivation of ornamental plants, in open-air cultivations and under glass (greenhouses) in many plant cultivations. Also in the public area, in hunting gardens, parks, in the greening of noise barriers.

                                                          The automatic system has to decide whether water is needed, how much water is given and, if necessary, whether liquid fertilizer is to be distributed. For this purpose, sensors, time functions and programs - adapted to the respective water distribution system - are combined in such a way that the plants grow optimally. At the same time, the water consumption is to be minimized and fertilization should be adapted to the actual needs of the plants.
                                                        • Smart Metering

                                                        • Computer-aided measurement, determination and control of energy consumption and supply.
                                                          An intelligent water meter is a meter for water (also for energy, eg electricity or gas) which indicates the actual energy consumption and the actual usage time to the respective connected user and is integrated into a communication network.

                                                          For providers, the use of smart meters is interesting to adapt the provision to consumption. Remote-readable meters also make the annual read-out unnecessary, as the meter data can be electronically read out by the supplier.

                                                          In addition, the readings and also the settlements of several supply networks can be combined. The installation of communicative counters is of primary interest when electricity or gas meters, where a legal obligation exists, a corresponding infrastructure must be established, as well as the routine exchange of old meters.

                                                          Here, particularly wireless technology (RFID/sensor technology, data transmission) is required. This facilitates the installation and can thus be used in almost all conditions.
                                                        • Cold Chain

                                                        • Storage, transport and processing of temperature sensitive goods.
                                                          A cold chain is a temperature-controlled supply chain. An unbroken cold chain is an uninterrupted series of storage and distribution activities which maintain a given temperature range.

                                                          It is used to help extend and ensure the shelf life of products such as fresh agricultural products, seafood, frozen food, photographic film, chemicals, and pharmaceutical drugs or any type of temperature sensitive goods.

                                                          Such products, during transport and when in transient storage, are called cool cargo. To ensure that the needed conditions are given at all times wireless sensors are used. They collect the data and transmit them to the dedicated point(s) or store them for later use.
                                                        • Asset Management

                                                        • Timely inventory and freight management remotely with high-tech products. Manage assets safe

                                                          Examples of such assets are vehicles, containers, office inventory or tools. The goal of mobile solutions for asset management is to make assets available and, if necessary, to ensure the efficient use thereof.

                                                          For this reason, an asset management system includes locating the assets, their use and ensure their maintenance. From our daily life we ​​know how much time we spend with the search for personal belongings. This problem is far more complex in companies, which depend on many different assets and often the basis of a common use.

                                                          Employees waste a lot of time when searching for assets thus increased process costs arising e.g. if the right containers are not available, causing part can not be transported to the line and production for the assembly. Another example is improperly maintained tools that cause harm or even can lead to accidents.
                                                        • Automotive

                                                        • Process optimization through real-time data to increase quality and efficiency.
                                                          RFID and sensor technology have been used in the automotive environment for almost 20 years. In the course of the improvements to these technologies, manufacturers are beginning to use the use of RFID or sensor technology to improve the manufacturing process as well as to extend the functionality of the vehicles.

                                                          The scope of application covers, among other things, RFID / sensor technology using RF, the use of tire pressure monitoring systems and access and safety systems. Electronic toll systems and automatic vehicle identification are applications that are already in use.
                                                        • Healthcare

                                                        • Instruments Identification and optimization of sterilization rooms to the operating room.
                                                          Healthcare is differentiated. A distinction is made between outpatient and inpatient services provided by lawyers and dentists, hospitals and other service providers; A separate field is the supply of medicines.

                                                          M2M solutions are increasingly used in large as well as small hospitals and clinics. Instrument identification, patient management, product identification, access control or warehouse management are the typical processes that have been optimized for some time by means of electronic solutions and high-tech products.
                                                        • Industry

                                                        • Industrial applications require robust and long-lasting solutions.
                                                          Industrial applications are the application area by far which most solutions require. The entire range of M2M/IoT solutions can be used here due to the extremely many and varied requirements.

                                                          Whether locally or remotely, technical tools for monitoring, controlling and managing processes, goods, people or operations are particularly required.

                                                          Constant optimization and efficiency improvements are one of the challenges in day-to-day operations. New products, processes, materials and tasks demand fast reaction times and optimal utilization of the resources.

                                                          Sensors, RFID and data management are required to support the industry
                                                        • Indoor Track & Trace

                                                        • The kings discipline of building cleansing to find goods quickly and purposefully.
                                                          A particularly flexible technology is the use of local radio cells as used in the Indoor Tracking & Positioning System (ITPS). Alternatively, this technology is also referred to as RTLS (Realtime Locating System).

                                                          A system of transmitters and receivers is installed in the building so that the position can be determined directly. Recorded data is stored in a database and can be retrieved at any time.

                                                          The special feature of the ITPS is that it is not absolutely necessary to equip the entire building or the entire warehouse with the system, but only the relevant areas. This reduces the infrastructure costs and can be configured in such a way that only dedicated areas are monitored.
                                                        • Service and Maintenance

                                                        • Targeted and fast reaction through complete description of the situation.
                                                          An effective area of maintenance/service is now a significant success factor for many industries that offer an "on-site service".

                                                          Drivers for the integration of mobile solutions in this area are the dynamization of competition, cost pressure, plant safety and quality management. With RFID, sensor technology and data transmission solutions, this task area can be designed to be much more efficient and cost-effective.
                                                        • Security and Control

                                                        • Security at the highest level. Always online to check sensitive documents and data.
                                                          It's fast and secure - the new mobile handheld for police and/or security companies. Policemen can now use the handheld to retrieve data directly from police computers. This makes the search or a person check easier and does not take so long.

                                                          Until now, Policemen had to call the office in the case of a vehicle inspection, communicate the license plate to an employee and then wait until they were informed. Today, they can dial into the police server themselves via the Smart devcie and get the information they need in seconds.

                                                          The computer tells if the car is reported as stolen and to whom it belongs. In addition, the investigator finds out whether the holder is registered with the police and why. If he is known as an offender, the policeman can also take a photo of him. The technology also offers the possibility to communicate with the computers of other security authorities such as the Federal Criminal Police Office.