- Offer Profile
- KELLER Pressure headquartered in Winterthur (Switzerland), is Europe’s leading manufacturer of isolated pressure transducers and transmitters. The company, which has a global workforce of around 450 employees, was founded in 1974 by Hannes W. Keller, a graduate in physics and the inventor of the integrated silicon measuring cell. The entire value creation, from production of the individual parts and calibration of the sensor through to the final inspection of the finished products, takes place at the headquarters in Winterthur. All KELLER Pressure products are therefore “Made in Switzerland”.
Visit us on:
Pressure Transducers
- Encapsulated piezoresistive pressure transducers for absolute and gauge pressure measurement are KELLER Pressure's core competence and lie at the heart of all KELLER Pressure products for end users. They have proved their worth millions of times over and are a reliable base for any measuring system. Transducers can be adjusted and optimised according to your needs.
OEM Pressure Transducers
Series 10L
-
The pressure transducers of the 10L series have a robust housing made of stainless steel, giving them optimum long-term stability for a range of OEM applications. The metal diaphragm is welded on front-flush and gap-free, separating off the piezoresistive pressure sensor, which is made of silicon, from the measuring medium. Every pressure transducer is measured over the entire pressure and temperature profile and is supplied with a detailed calibration sheet.
Specifications
- Pressure Ranges: 0...0,1 to 0...200 bar
- Accuracy: ±0,25 %FS
- Long Term Stability: ±0,15 %FS
- Dimensions: ø 19 mm x 15 mm
- Temperature Range: -40...125 °C
Series 9L
-
The pressure transducers of the 9L series have a compact, robust housing made of stainless steel, giving them outstanding long-term stability for a range of OEM applications. The metal diaphragm is welded on front-flush and gap-free, separating off the piezoresistive pressure sensor, which is made of silicon, from the measuring medium. Every pressure transducer is measured over the entire pressure and temperature profile and is supplied with a detailed calibration sheet.
Specifications
- Pressure Ranges: 0...0,2 to 0...200 bar
- Accuracy: ±0,25 %FS
- Long Term Stability: ±0,2 %FS
- Dimensions: ø 19 mm x 5 mm
- Temperature Range: -40...125 °C
Series 9FL
-
The pressure transducers of the 9FL series have a compact, robust housing made of stainless steel, giving them outstanding long-term stability for a range of OEM applications. The metal diaphragm is welded on front-flush and gap-free, separating off the piezoresistive pressure sensor, which is made of silicon, from the measuring medium. The additional flange on the housing means that it can be welded to another housing, or an axial seal can be used. Every pressure transducer is measured over the entire pressure and temperature profile and is supplied with a detailed calibration sheet.
Specifications
- Pressure Ranges: 0...0,2 to 0...200 bar
- Accuracy: ±0,25 %FS
- Long Term Stability: ±0,2 %FS
- Dimensions: ø 17 mm x 5,5 mm
- Temperature Range: -40...125 °C
Series 7L
-
The pressure transducers of the 7L series have a compact, robust housing made of stainless steel, giving them excellent long-term stability for a range of OEM applications. The metal diaphragm is welded on front-flush and gap-free, separating off the piezoresistive pressure sensor, which is made of silicon, from the measuring medium. Every pressure transducer is measured over the entire pressure and temperature profile and is supplied with a detailed calibration sheet.
Specifications
- Pressure Ranges: 0...5 to 0...200 bar
- Accuracy: ±0,5 %FS
- Long Term Stability: ±0,25 %FS
- Dimensions: ø 15 mm x 5 mm
- Temperature Range: -20...100 °C
Series 4L
-
Series 3 L…10 L are a new generation of transducers from KELLER which feature smaller capsule dimensions and a crevice-free diaphragms. KELLER’s expertise in laser welding very thin materials enables the production of a line of transducers with a crevice-free media interface while improving on performance and long-term stability.
Each transducer undergoes extensive automated testing and is supplied with calibration data which includes sensitivity, linearity, initial zero offset and thermal effects over the compensated temperature range. This provides the user with the information required to ensure performance within specifications.
Specifications
- Pressure Ranges: 0…10 to 0…200 bar
- Accuracy: ±0,5 %FS
- Long Term Stability: ±0,5 %FS
- Dimensions: ø 11 mm x 4,2 mm
- Temperature Range: -10...80 °C
OEM High-Pressure Transducers
Series 7LHP
-
The high-pressure transducers of the 7LHP series have a robust housing made of stainless steel, giving them optimum long-term stability for a range of OEM applications. The metal diaphragm is welded on front-flush and gap-free, separating off the piezoresistive pressure sensor, which is made of silicon, from the measuring medium. Every pressure transducer is measured over the entire pressure and temperature profile and is supplied with a detailed calibration sheet.
Specifications
- Pressure Ranges: 0…100 to 0…2000 bar
- Accuracy: ±0,5 %FS
- Long Term Stability: ±0,25 %FS
- Dimensions: ø 15 mm x 8 mm
- Temperature Range: -55…180 °C
- Material: Steel 1.4435, Inconel 718, Titanium
Series 6LHP
-
The high-pressure transducers of the 6LHP series have a robust housing made of stainless steel, giving them optimum long-term stability for a range of OEM applications. The metal diaphragm is welded on front-flush and gap-free, separating off the piezoresistive pressure sensor, which is made of silicon, from the measuring medium. Every pressure transducer is measured over the entire pressure and temperature profile and is supplied with a detailed calibration sheet.
Specifications
- Pressure Ranges:0…100 to 0…2000 bar
- Accuracy: ±0,5 %FS
- Long Term Stability: ±0,25 %FS
- Dimensions: ø 13 mm x 8 mm
- Temperature Range: -40…150 °C
- Material: Steel 1.4435, Hastelloy C-276, Inconel 718
Series 10LHP
-
The high-pressure transducers of the 10LHP series have a robust housing made of stainless steel, giving them optimum long-term stability for a range of OEM applications. The metal diaphragm is welded on front-flush and gap-free, separating off the piezoresistive pressure sensor, which is made of silicon, from the measuring medium. Every pressure transducer is measured over the entire pressure and temperature profile and is supplied with a detailed calibration sheet.
Specifications
- Pressure Ranges: 0...200 to 0...1000 bar
- Accuracy: ±0,25 %FS
- Material: Steel 1.4435
- Dimensions: ø 19 mm x 15 mm
- Temperature Range: -20...100 °C
OEM Differential Pressure Transducers
Series PD-10L
-
The pressure transducers of the PD-10L series have been developed to measure differential pressure. These OEM pressure transducers have a single silicon diaphragm in their interior, which is pressurised from both sides and measures the pressure difference directly. This design enables them to measure tiny pressure differences even at an extremely high line pressure.
Specifications
- Pressure Ranges : 0…0,1 to 0…30 bar
- Line Pressure: 200 bar
- Accuracy: ±0,25 %FS
- Long Term Stability: ±0,15 %FS
- Dimensions: ø 19 mm x 26 mm
- Temperature Range: -40...125 °C
Series PD-10LHP
-
The pressure transducers of the PD-10LHP series have been developed to measure differential pressure. These OEM pressure transducers have a single silicon diaphragm in their interior, which is pressurised from both sides and measures the pressure difference directly. This design enables them to measure tiny pressure differences even at an extremely high line pressure.
Specifications
- Pressure Ranges : 0…0,1 to 0…30 bar
- Line Pressure: 600 bar
- Accuracy: ±0,25 %FS
- Long Term Stability: ±0,15 %FS
- Dimensions: ø 19 mm x 26 mm
- Temperature Range: -40...125 °C
OEM Pressure Transducers with Thread
Series 20
-
The pressure transducers of the 20 series with threaded connection offer high long-term stability and overload resistance as well as optimised temperature behaviour. The compact, robust stainless steel housing without internal seals is suitable for various OEM applications. Each pressure transducer is calibrated via pressure and temperature and supplied with a detailed calibration sheet.
Specifications
- Pressure Ranges: 0…5 to 0…600 bar
- Accuracy: ±0,5 %FS
- Pressure Connection: G1/4, 1/4-18NPT
- Dimensions: HEX19 x 32mm
- Temperature Range:-10…80 °C
Series 6
-
The pressure transducers of the 20S series with threaded connection offer high long-term stability and overload resistance as well as optimised temperature behaviour. The compact stainless steel housing without internal seals is suitable for various OEM applications. Each pressure transducer is calibrated via pressure and temperature and supplied with a detailed calibration sheet.
Specifications
- Pressure Ranges: 0…0,3 to 0…1000 bar
- Accuracy: ±0,25 %FS
- Pressure Connection: G1/4, 1/4-18NPT
- Dimensions: HEX22 x 34mm
- Temperature Range: -10...80 °C
Series 13
-
The series 13 pressure transducers have internal water cooling and are suitable for use in media temperatures of up to 350 °C. Typical applications include superheated steam circuits, engine test benches or chemical process monitoring.
Specifications
- Pressure Ranges: 0…10 to 0…1000 bar
- Accuracy: ±0,5 %FS
- Pressure Connection: M14 x 1,2
- Dimensions: ø 28 mm x 48 mm
- Temperature Range: 20...350 °C
OEM Pressure Transducers Special Designs
Series 3L
-
The pressure transducers of the 3L series have a small and compact design, making them ideally suited to OEM applications with limited installation space. The metal diaphragm is welded on front-flush and gap-free, separating off the piezoresistive pressure sensor, which is made of silicon, from the measuring medium. Every pressure transducer is measured over the entire pressure and temperature profile and is supplied with a detailed calibration sheet.
Specifications
- Pressure Ranges : 0...20 to 0...200
- Accuracy: ±0,5 %FS
- Long Term Stability: ±0,5 %FS
- Dimensions: ø 9,5 mm x 4,2 mm
- Temperature Range: 20...30 °C
Series 6L
-
The pressure transducers of the 6L series have a small and compact design, making them ideally suited to OEM applications with limited installation space. The metal diaphragm is welded on front-flush and gap-free, separating off the piezoresistive pressure sensor, which is made of silicon, from the measuring medium. Every pressure transducer is measured over the entire pressure and temperature profile and is supplied with a detailed calibration sheet.
Specifications
- Pressure Ranges : 0...10 to 0...200
- Accuracy: ±0,5 %FS
- Long Term Stability: ±0,35 %FS
- Dimensions: ø 13 mm x 4,5 mm
- Temperature Range: -10...80 °C
Series 8L
-
The pressure transducers of the 8L series have a compact, robust housing made of stainless steel, giving them excellent long-term stability for a range of OEM applications. The metal diaphragm is welded on front-flush and gap-free, separating off the piezoresistive pressure sensor, which is made of silicon, from the measuring medium. Every pressure transducer is measured over the entire pressure and temperature profile and is supplied with a detailed calibration sheet.
Specifications
- Pressure Ranges : 0…0,2 to 0…200 bar
- Accuracy: ±0,5 %FS
- Long Term Stability: ±0,2 %FS
- Dimensions: ø 17 mm x 7 mm
- Temperature Range: -40...125 °C
Miniature Pressure Transducers without Oil Filling
Series M5
-
The miniature pressure transducer M5 takes its name from the fine M5 thread at the sensor head that makes it possible to take measurements in places which are difficult to access and in narrow pipelines. Together with its ability to measure media at temperatures of up to 180 °C in a dynamic range from 0 to 50 kHz, this makes it ideally suited to measurements on engine test benches.
Specifications
- Pressure Ranges : 0...3 to 0...30 bar
- Accuracy: ±0,3 %FS
- Pressure Connection: M5 x 0.5 thread
- Dimensions: ø 6,2 mm x 40 mm
- Temperature Range: -50...180 °C
Series 2Mi
-
These low-cost miniature pressure transducers have been specially developed for very rapid hydrodynamic and aerodynamic in situ pressure measurements. The 2Mi sensors are available in a variety of housing designs and can simply be stuck on at the desired location. Despite its miniature design, the sensor chip is protected against external influences by a steel housing and a silicone elastomer coating. It can also be used in liquids.
Specifications
- Pressure Ranges : 0…1 to 0…400 bar
- Accuracy: ±0,5 %FS
- Pressure Connection: Elastomer coating
- Dimensions: ø 4,5 mm x 3 mm
- Temperature Range: -20...80 °C
Catheters
-
These medical catheters for applications in urology, cardiology and gastroenterology are compatible with common monitor systems. A range of sizes (4F to 8F) and a modular design make it possible to construct all manner of sequences of measuring cells and lumen openings.
Specifications
- Pressure Ranges : -0,5…0,5 bar
- Accuracy: ±0,5 %FS
- Pressure Connection: 4F / 5F / 6F / 8F
- Dimensions: ø 1,33…2,67 mm
- Temperature Range: 20...40 °C
Tip sensors
-
These miniature pressure probes are designed for measuring the flow and dynamic pressure of liquids and gases in pipelines. With diameters between 1,32 mm and 2,64 mm and a flexible yet robust cable, these probes can also be used in narrow ducts at depths of several metres.
Specifications
- Pressure Ranges : 0…1 to 0…5 bar
- Accuracy: ±0,5 %FS
- Pressure Connection: 4F / 5F / 6F / 8F
- Dimensions: ø 1,33…2,67 mm
- Temperature Range: 20...40 °C
Pressure Transmitters
- Pressure transmitters are sensors that use additional electronics to compensate for linearity deviations and temperature errors, outputting measurement results as standardised signals. Every transmitter is measured over the entire pressure and temperature profile and compared to the desired signal span.
Standard Pressure Transmitters
Series 21C
-
The pressure transmitters of the 21C series with ratiometric 0,5...4,5V output combine chip-in-oil measuring cells with conventional electrical connections and pressure connections, making them ideal for industrial use. The transmitters are extremely resistant to environmental influences and deliver accurate measurement results over a temperature range of -40 °C to 125 °C.
Specifications
- Pressure Ranges : 0…2 to 0…1000 bar
- Accuracy: ±0,25 %FS
- Total Error Band: ±1,5 %FS @ -10…80 °C
- Interfaces: 0,5…4,5V ratiom.
- Temperature Range: - 40...125 °C
Series 21Y
-
The pressure transmitters of the 21Y series have no internal seal and a high insulation voltage of 300 VDC, and are extremely resistant to environmental influences. The sophisticated compensation circuit makes it possible to specify a narrow total error band. A wide range of pressure connections and electrical connections are available to choose from.
Specifications
- Pressure Ranges : 0…2 to 0…1000 bar
- Accuracy: ±0,5 %FS
- Total Error Band: ±1,5 %FS @ -10…80 °C
- Interfaces:4…20 mA, 0…10V
- Temperature Range: - 40...100 °C
Series 23SY
-
The pressure transmitters of the 23SY series are designed for elevated requirements in industrial applications. Thanks to its modular concept, this series is highly flexible and makes it possible to realise customer-specific requirements in very little time. The sophisticated compensation circuit makes it possible to specify a narrow total error band.
Specifications
- Pressure Ranges : 0…0,1 to 0…1000 bar
- Accuracy: ±0,25 %FS
- Total Error Band: ±0,7 %FS @ -10…80 °C
- Interfaces: 4…20 mA, 0…10 V
- Temperature Range: - 40...100 °C
Series 33X
-
The pressure transmitters of the 33X series use digital compensation with a mathematical model to achieve exceptional accuracy of 0,05 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. Additional measurements and selections can optionally be used to achieve a precision (and also, if calibrated in an accredited test laboratory, an accuracy) of 0,01 %FS. In addition to the digital RS485 interface, the X-line transmitters have a rangeable, analog current or voltage output.
Specifications
- Pressure Ranges : 0…0,3 to 0…1000 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,1 %FS @ -10…80 °C
- Interfaces: RS485, 4…20 mA, 0…10 V
- Temperature Range: - 40...120 °C
Series 23SX
-
In the 23SX series high-precision pressure transmitters, temperature dependencies and non-linearity are precisely compensated for by means of a mathematical model in the microcontroller. In addition to the RS485 interface with Modbus RTU protocol, there is also the option of outputting the measurement results as a scalable analogue signal via the integrated D/A converter. The fully welded construction without internal seals is suitable for dynamic applications. Only stainless steel is in contact with the media.
Specifications
- Pressure Ranges : 0…0,16 to 0…1000 bar
- Accuracy: ±0,1 %FS
- Total Error Band: ±0,25 %FS @ -10…80 °C
- Interfaces: RS485, 4…20 mA, 0…10 V
- Temperature Range: - -40…125 °C
Series 21PY
-
The compact pressure transmitters of the 21PY series with 0,5...4,5V output have a diameter of just 15 mm and weigh in at less than 20 g. The sophisticated compensation circuit makes it possible to specify a narrow total error band.
Specifications
- Pressure Ranges : 0…10 to 0…600 bar
- Accuracy: ±0,25 %FS
- Total Error Band: ±0,7 %FS @ -10…80 °C
- Interfaces: 0,5…4,5 V
- Temperature Range: - 20...100 °C
- Special characteristics: Small and lightweight
- Homologation: none
Series 41X
-
The capacitive pressure transmitters of the 41X series are designed for measuring relative pressure values in the mbar and µbar range. They use digital compensation with a mathematical model to achieve an accuracy of 0,1 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. In addition to the digital RS485 interface, the X-line transmitters have a rangeable analog current or voltage output.
Specifications
- Pressure Ranges : 0…0,03 to 0…0,3 bar
- Accuracy: ±0,1 %FS
- Total Error Band: ±0,2 %FS @ 10…50 °C
- Interfaces: RS485, 4…20 mA, 0…10V
- Temperature Range: -20…80 °C
IO-Link and CANopen Pressure Transmitters
Series 21Zio
-
The compact pressure transmitters of the 21Zio series can be used both as a pressure measuring instrument and as a pressure switch. Thanks to the universal IO-Link interface according to IEC 61131-9, the sensor is flexible and easily and quickly integrable into intelligent automation and other systems. The switching functions and other parameters can be called up and configured directly via IO-Link. In this way, machine downtimes are reduced to a minimum and personnel are relieved.
Specifications
- Pressure Ranges :0…4 to 0…1000 bar
- Accuracy: ±0,5 %FS
- Total Error Band: ±1,5 %FS @ -10…80 °C
- Interfaces: IO-Link
- Temperature Range: --40…125 °C °C
Series 23SXc
-
In the 23SXc series high-precision pressure transmitters, temperature dependencies and non-linearity are precisely compensated for by means of a mathematical model in the microcontroller. With the CANopen interface, KELLER offers a highly accurate pressure transmitter that is optimally suited for a wide variety of automation solutions. The fully welded construction without internal seals is suitable for dynamic applications. Only stainless steel is in contact with the media.
Specifications
- Pressure Ranges : 0…0,16 to 0…1000 bar
- Accuracy: ±0,1 %FS
- Total Error Band: ±0,25 %FS @ -10…80 °C
- Interfaces: CANopen
- Temperature Range: - -40…125 °C
Front-Flush Pressure Transmitters
Series 25Y
-
The pressure transmitters of the 25Y series with a front-flush separating diaphragm are designed for elevated requirements in industrial applications and are supplied with a G1/2" male pressure port. Thanks to its modular concept, this series is highly flexible and makes it possible to realise customer-specific requirements in very little time. The sophisticated compensation circuit makes it possible to specify a narrow total error band.
Specifications
- Pressure Ranges : 0…0,5 to 0…1000 bar
- Accuracy: ±0,25 %FS
- Total Error Band: ±0,7 %FS @ -10…80 °C
- Interfaces: 4…20 mA, 0…10 V
- Temperature Range: - 40...100 °C
- Intrinsic safety: Series 25YEi
Series 35X
-
The front-flush pressure transmitters of the 35X series use digital compensation with a mathematical model to achieve exceptional accuracy of 0,05 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. In addition to the digital RS485 interface, the X-line transmitters have a rangeable, analog current or voltage output.
Specifications
- Pressure Ranges : 0…0,3 to 0…1000 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,1 %FS @ -10…80 °C
- Interfaces: RS485, 4…20 mA, 0…10 V
- Temperature Range: - 40...120 °C
Series 35XHT
-
The pressure transmitters of the 35XHT series are suitable for use in media temperatures up to 150 °C and can therefore be used in bioreactors and autoclaves that have to be sterilised regularly. They use digital compensation with a mathematical model to achieve an accuracy of 0,15 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. In addition to the digital RS485 interface, the X-line transmitters have a rangeable, analog current or voltage output. The standard model of the 35XHT series has an Ingold fitting as pressure connection.
Specifications
- Pressure Ranges : 0…1 to 0…30 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,15 %FS @ 20…200 °C
- Interfaces: RS485, 4…20 mA, 0…10 V
- Temperature Range: - 20...150 °C
Series 35XHTC
-
The high-temperature pressure transmitters of the 35XHTC series can be used at media temperatures of up to 300 °C. The remote electronics are designed for temperatures of up to 120 °C. They use digital compensation with a mathematical model to achieve an accuracy of 0,5 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. In addition to the digital RS485 interface, the X-line transmitters have a rangeable, analog current or voltage output. The standard model of the 35XHTC series has a G1/2 thread as pressure connection.
Specifications
- Pressure Ranges : 0…3 to 0…1000 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,5 %FS @ -10…80 °C
- Interfaces :RS485, 4…20 mA, 0…10 V
- Temperature Range: 0...300 °C
Series 35XHTT
-
The pressure transmitters of the 35XHTT series are suitable for use in media temperatures up to 150 °C and can therefore be used in bioreactors and autoclaves that have to be sterilised regularly. They use digital compensation with a mathematical model to achieve an accuracy of 0,15 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. The standard model of the 35XHTT series has a G1/2 thread as pressure connection.
Specifications
- Pressure Ranges : 0…1 to 0…30 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,15 %FS @ 20…120 °C
- Interfaces: RS485, 4…20 mA, 0…10 V
- Temperature Range: -20…150 °C
High-Temperature Pressure Transmitters
Series M5HB
-
The ultra-fast M5HB pressure transmitter can process pressure changes with a bandwidth of 50 kHz. This is achieved by means of the continuous analog signal that is adjusted by a digital circuit in real time and is amplified to a standardised 0...10V signal. The miniature sensor head with a fine M5 thread can withstand temperatures of up to 180 °C, is overload-proof up to a magnitude of five times the measuring range, and is also resistant to vibrations.
Specifications
- Pressure Ranges : 0…3 to 0…30 bar
- Accuracy: ±0,1 %FS
- Total Error Band: ±0,5 %FS @ -20…125 °C
- Interfaces : 0…10 V
- Temperature Range: -40…180 °C
Series M8coolHB
-
The ultra-fast M8coolHB pressure transmitter can process pressure changes with a bandwidth of 50 kHz. This is achieved by means of the continuous analog signal that is adjusted by a digital circuit in real time and is amplified to a standardised 0...10V signal. The miniature sensor head with a fine M8 thread can withstand temperatures of up to 1000 °C with suitable cooling, is overload-proof up to a magnitude of five times the measuring range, and is also resistant to vibrations.
Specifications
- Pressure Ranges : 0…3 to 0…30 bar
- Accuracy: ±0,1 %FS
- Total Error Band: ±1,0 %FS @ -40…180 °C
- Interfaces : 0…10 V
- Temperature Range: -50…1000 °C
Series 35XHTC
-
The high-temperature pressure transmitters of the 35XHTC series can be used at media temperatures of up to 300 °C. The remote electronics are designed for temperatures of up to 120 °C. They use digital compensation with a mathematical model to achieve an accuracy of 0,5 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. In addition to the digital RS485 interface, the X-line transmitters have a rangeable, analog current or voltage output. The standard model of the 35XHTC series has a G1/2 thread as pressure connection.
Specifications
- Pressure Ranges : 0…3 to 0…1000 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,5 %FS @ -10…80 °C
- Interfaces :RS485, 4…20 mA, 0…10 V
- Temperature Range: 0...300 °C
Series 9LC
-
The pressure transmitters of the 9LC series use the chip-in-oil technology developed by KELLER Pressure, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy C-276. The transmitters are extremely resistant to environmental influences and deliver compensated measurement results as an analog, ratiometric 0,5...4,5V output signal over a wide temperature range.
Specifications
- Pressure Ranges : 0…1 to 0…1000 bar
- Accuracy: ±0,25 %FS
- Total Error Band: ±0,8 %FS @ -10…80 °C
- Interfaces: 0,5…4,5V ratiom.
- Temperature Range: - 40...150 °C
Series 35XHT
-
The pressure transmitters of the 35XHT series are suitable for use in media temperatures up to 150 °C and can therefore be used in bioreactors and autoclaves that have to be sterilised regularly. They use digital compensation with a mathematical model to achieve an accuracy of 0,15 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. In addition to the digital RS485 interface, the X-line transmitters have a rangeable, analog current or voltage output. The standard model of the 35XHT series has an Ingold fitting as pressure connection.
Specifications
- Pressure Ranges : 0…1 to 0…30 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,15 %FS @ 20…200 °C
- Interfaces: RS485, 4…20 mA, 0…10 V
- Temperature Range: - 20...150 °C
Series 35XHTT
-
The pressure transmitters of the 35XHTT series are suitable for use in media temperatures up to 150 °C and can therefore be used in bioreactors and autoclaves that have to be sterilised regularly. They use digital compensation with a mathematical model to achieve an accuracy of 0,15 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. The standard model of the 35XHTT series has a G1/2 thread as pressure connection.
Specifications
- Pressure Ranges : 0…1 to 0…30 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,15 %FS @ 20…120 °C
- Interfaces: RS485, 4…20 mA, 0…10 V
- Temperature Range: -20…150 °C
Differential Pressure Transmitters
Series PD-33X
-
The differential pressure transmitters of the PD-33X series are suitable for 'wet/wet' applications. They have a single silicon diaphragm in their interior, which is pressurised from both sides and measures the pressure difference directly. This design enables them to measure small pressure differences even at an extremely high line pressure. The transmitters use digital compensation with a mathematical model to achieve exceptional accuracy of 0,05 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band.
Specifications
- Pressure Ranges : 0…0,3 to 0…30 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,1 %FS @-10…80 °C
- Line pressure: 200 bar / 600 bar
- Interfaces: RS485, 4…20 mA, 0…10 V
- Special characteristics: Classic 'wet/wet'
Series PD-39X
-
The differential pressure transmitters of the PD-39X series measure the pressure difference indirectly using two absolute pressure sensors. The dual-sensor design with numerical differential formation also outputs the line pressure values via the digital RS485 interface and guarantees a high overload resistance. The additional analog current or voltage output is primarily used to output the differential pressure range, which is freely rangeable within the line pressure range.
Specifications
- Pressure Ranges : 0…0,3 to 0…30 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,1 %FS @-10…80 °C
- Line pressure: 0…3 to 0…300 bar
- Interfaces: RS485, 4…20 mA, 0…10 V
- Special characteristics: Line pressure measurement
Series PRD-33X
-
The differential pressure transmitters of the PRD-33X series are designed for accurate measurements in low pressure ranges with very high overload on both sides. In addition to the differential pressure sensor, which may only be exposed to gases at its rear face, the devices have an additional absolute pressure sensor that measures the line pressure. Both measured values are output via the digital RS485 interface and are the ideal basis for cryogenic tank monitoring.
Specifications
- Pressure Ranges : 0…0,35 to 0…3 bar
- Accuracy: ±0,1 %FS
- Total Error Band: ± 0,3 %FS @ -30…60 °C
- Line pressure: 0…40 bar
- Interfaces: RS485
- Special characteristics: Line pressure measurement
Series PD-41X
-
The capacitive pressure transmitters of the PD-41X series are designed for measuring differential pressure values in the mbar and µbar range. They use digital compensation with a mathematical model to achieve an accuracy of 0,1 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. In addition to the digital RS485 interface, the X-line transmitters have a rangeable analog current or voltage output.
Specifications
- Pressure Ranges : 0…0,03 to 0…0,3 bar
- Accuracy: ±0,1 %FS
- Total Error Band: ± 0,2 %FS @ 10…50 °C
- Line pressure: 2 bar
- Interfaces: RS485, 4…20 mA, 0…10 V
- Special characteristics: Capacitive sensor
Automotive Pressure Transmitters
Series 22M
-
The pressure transmitters of the 22M series with brass housing were designed to be a reliable solution for automotive and industrial applications. They are homologated and can be used, for instance, to measure the content of the gas tank in bivalent vehicles.
Specifications
- Pressure Ranges : 0…5 to 0…250 bar
- Total Error Band: ±2,0 %FS @ 0…80 °C
- Interfaces: 0,5…4,5 V ratiom., 4...20 mA
- Special characteristics: Brass
- Homologation: E4-110R, E4-10R
Series 22DT
-
The 22DT series has been specially developed for use in bivalent vehicles (volume flow measurement when running on natural gas) and is homologated for the automotive industry. However, it also has other industrial applications. The NTC or PT temperature sensor located directly beneath the steel diaphragm reacts more quickly to temperature changes thanks to its special design. The pressure transmitters are protected against electromagnetic fields up to 200 V/m and output the measured values as a ratiometric 0,5...4,5V analog signal. The connections of the temperature sensor are fed out directly.
Specifications
- Pressure Ranges : 0…14 bar
- Total Error Band: ±2,0 %FS @ 0…90 °C
- Interfaces: 0,5…4,5 V ratiom.
- Special characteristics: With temperature sensor
- Homologation: E4-110R, E4-10R
Series 21PY
-
The compact pressure transmitters of the 21PY series with 0,5...4,5V output have a diameter of just 15 mm and weigh in at less than 20 g. The sophisticated compensation circuit makes it possible to specify a narrow total error band.
Specifications
- Pressure Ranges : 0…10 to 0…600 bar
- Accuracy: ±0,25 %FS
- Total Error Band: ±0,7 %FS @ -10…80 °C
- Interfaces: 0,5...4,5 V
- Temperature Range: - 20...100 °C
- Special characteristics: Small and lightweight
- Homologation: none
Series 21PHB
-
The highly dynamic and compact 21PHB pressure transmitter is suitable for use in liquids and gases, and can process pressure changes with a bandwidth of 20 kHz. This is achieved by means of the continuous analog signal that is adjusted by a digital circuit in real time and is amplified to a standardised 0...10V signal. The miniature sensor head with a fine M6 thread can withstand temperatures of up to 100 °C and is overload-proof up to a magnitude of four times the measuring range.
Specifications
- Pressure Ranges : 0…10 to 0…600 bar
- Total Error Band: ±0,5%FS @ -10…80 °C
- Interfaces: 0…10 V
- Special characteristics: 20kHz bandwidth
- Homologation: none
Series 22S
-
The pressure transmitters of the 22S series were designed for use in automotive and industrial applications. They are homologated and every one of their elements has been configured for optimum reliability. In this steel version of the 22 series, all parts that come into contact with media are made of stainless steel (AISI 316L).
Specifications
- Pressure Ranges : 0…5 to 0…250 bar
- Total Error Band: ±2,0 %FS @ 0…80 °C
- Interfaces: 0,5…4,5 V ratiom., 4...20 mA
- Special characteristics: Steel 316L
- Homologation: none
Intrinsically Safe Pressure Transmitters
Series 23SY-Ei
-
The pressure transmitters of the 23SY-Ei series are designed for elevated requirements in industrial applications. Thanks to its modular concept, this series is highly flexible and makes it possible to realise customer-specific requirements in very little time. The sophisticated compensation circuit makes it possible to specify a narrow total error band.
Specifications
- Pressure Ranges : 0…0,1 to 0…1000 bar
- Accuracy: ±0,25 %FS
- Total Error Band: ±0,7 %FS @ -10…80 °C
- Interfaces: 4…20 mA, 0…10 V
- Temperature Range: - 40...100 °C
Series 25Y-Ei
-
The pressure transmitters of the 25Y-Ei series with a front-flush separating diaphragm are designed for elevated requirements in industrial applications and are supplied with a G1/2" male pressure port. Thanks to its modular concept, this series is highly flexible and makes it possible to realise customer-specific requirements in very little time. The sophisticated compensation circuit makes it possible to specify a narrow total error band.
Specifications
- Pressure Ranges : 0…0,5 to 0…1000 bar
- Accuracy: ±0,25 %FS
- Total Error Band: ±0,7 %FS @ -10…80 °C
- Interfaces: 4…20 mA, 0…10 V
- Temperature Range: - 40...100 °C
Series 33X-Ei
-
The pressure transmitters of the 33X-Ei series use digital compensation with a mathematical model to achieve exceptional accuracy of 0,05 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. Additional measurements and selections can optionally be used to achieve a precision (and also, if calibrated in an accredited test laboratory, an accuracy) of 0,01 %FS. In addition to the digital RS485 interface, the X-line transmitters have a rangeable, analog current or voltage output.
Specifications
- Pressure Ranges : 0…0,3 to 0…1000 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,1 %FS @ -10…80 °C
- Interfaces: RS485, 4…20 mA, 0…10 V
- Temperature Range: - 40...120 °C
Series 35X-Ei
-
The front-flush pressure transmitters of the 35X-Ei series use digital compensation with a mathematical model to achieve exceptional accuracy of 0,05 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. In addition to the digital RS485 interface, the X-line transmitters have a rangeable, analog current or voltage output.
Specifications
- Pressure Ranges : 0…0,3 to 0…1000 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,1 %FS @ -10…80 °C
- Interfaces: RS485, 4…20 mA, 0…10 V
- Temperature Range: - 40...120 °C
Series PD-33X-Ei
-
The differential pressure transmitters of the PD-33X-Ei series are suitable for 'wet/wet' applications. They have a single silicon diaphragm in their interior, which is pressurised from both sides and measures the pressure difference directly. This design enables them to measure small pressure differences even at an extremely high line pressure. The transmitters use digital compensation with a mathematical model to achieve exceptional accuracy of 0,05 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. Intrinsically safe – suitable for use in explosive atmospheres.
Specifications
- Pressure Ranges : 0…0,3 to 0…30 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,1 %FS @-10…80 °C
- Line pressure: 200 bar / 600 bar
- Interfaces: RS485, 4…20 mA, 0…10 V
- Special characteristics: Classic 'wet/wet'
Series PD-39X-Ei
-
The differential pressure transmitters of the PD-39X-Ei series measure the pressure difference indirectly using two absolute pressure sensors. The dual-sensor design with numerical differential formation also outputs the line pressure values via the digital RS485 interface and guarantees a high overload resistance. The additional analog current or voltage output is primarily used to output the differential pressure range, which is freely rangeable within the line pressure range.
Specifications
- Pressure Ranges : 0…0,3 to 0…30 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,1 %FS @-10…80 °C
- Line pressure: 0…3 to 0…300 bar
- Interfaces: RS485, 4…20 mA, 0…10 V
- Special characteristics: Line pressure measurement
Series 41X-Ei
-
The capacitive pressure transmitters of the 41X-Ei series are designed for measuring relative pressure values in the mbar and µbar range. They use digital compensation with a mathematical model to achieve an accuracy of 0,1 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. In addition to the digital RS485 interface, the X-line transmitters have a rangeable analog current or voltage output.
Specifications
- Pressure Ranges : 0…0,03 to 0…0,3 bar
- Accuracy: ±0,1 %FS
- Total Error Band: ±0,2 %FS @ 10…50 °C
- Interfaces: RS485, 4…20 mA, 0…10V
- Temperature Range: -20…80 °C
Flame Proof Pressure Transmitters
Series 33X-Ed
-
The pressure transmitters of the 33X-Ed series use digital compensation with a mathematical model to achieve exceptional accuracy of 0,05 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. Additional measurements and selections can optionally be used to achieve a precision (and also, if calibrated in an accredited test laboratory, an accuracy) of 0,01 %FS. In addition to the digital RS485 interface, the X-line transmitters have a rangeable, analog current or voltage output. Pressure-proof housing – suitable for use in explosive atmospheres.
Specifications
- Pressure Ranges : 0…0,3 to 0…1000 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,1 %FS @ -10…80 °C
- Interfaces: RS485, 4…20 mA, 0…10 V
- Temperature Range: - 40...120 °C
Series 35X
-
The front-flush pressure transmitters of the 35X-Ed series use digital compensation with a mathematical model to achieve exceptional accuracy of 0,05 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. In addition to the digital RS485 interface, the X-line transmitters have a rangeable, analog current or voltage output.
Specifications
- Pressure Ranges : 0…0,3 to 0…1000 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,1 %FS @ -10…80 °C
- Interfaces: RS485, 4…20 mA, 0…10 V
- Temperature Range: - 40...120 °C
Series 23-Ed
-
The series 23-Ed pressure transmitters are designed for industrial applications and are based on the highly stable pressure transducers of the 10L series and a fully analog circuit. Thanks to its modular concept, this series can be flexibly adapted to customer-specific pressure connections and connector plugs.
Specifications
- Pressure Ranges : 0…0,2 to 0…1000 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±4,0 %FS @ -10…80 °C
- Interfaces: 4…20 mA, 0…10 V
- Temperature Range: - 40...100 °C
Series 25-Ed
-
The series 25-Ed pressure transmitters with a front-flush separating diaphragm are designed for industrial applications and are supplied with a G1/2" or G3/4" male pressure port. They are based on a fully analog circuit. Pressure-proof housing – suitable for use in explosive atmospheres.
Specifications
- Pressure Ranges : 0…0,5 to 0…1000 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±4,0 %FS @ -10…80 °C
- Interfaces: 4…20 mA, 0…10 V
- Temperature Range: - 40...100 °C
OEM Pressure Transmitters
Series 4LC
-
The pressure transmitters of the 4LD series use the chip-in-oil technology developed by KELLER Pressure, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions.
Specifications
- Pressure Ranges: 0…10 to 0…200 bar
- Accuracy: ±0,25 %FS
- Total Error Band: ±1,0 %FS @ 0…50 °C
- Interfaces: 0,5…4,5 V ratiom.
- Dimensions: ø 11 mm x 4,2 mm
Series 7LD
-
The pressure transmitters of the 7LD series use the chip-in-oil technology developed by KELLER Pressure, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions.
Specifications
- Pressure Ranges: 0…3 to 0…200 bar
- Accuracy: ±0,15 %FS
- Total Error Band: ±0,7 %FS @ -10…80 °C
- Interfaces: I2C
- Dimensions: ø 15 mm x 5 mm
Series 9FLC
-
The 9FLC series is a special version of the 9LC pressure transmitter. The flanged housing can be mounted using an O-ring or welded on. As with all C-line products, the chip-in-oil technology developed by KELLER Pressure is used here, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy. The transmitters are extremely resistant to environmental influences and deliver highly accurate measurement results as an analog, ratiometric 0,5...4,5V output signal over a temperature range of -40 °C to 150 °C.
Specifications
- Pressure Ranges: 0…1 to 0…50 bar
- Accuracy: ±0,25 %FS
- Total Error Band: ±0,8 %FS @ -10…80 °C
- Interfaces: 0,5…4,5 V ratiom.
- Dimensions: ø 17 mm x 5,5 mm
Series 9LD
-
The pressure transmitters of the 9LD series use the chip-in-oil technology developed by KELLER Pressure, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions.
Specifications
- Pressure Ranges: 0…1 to 0…200 bar
- Accuracy: ±0,15 %FS
- Total Error Band: ± ±0,7 %FS @ -10…80 °C
- Interfaces: I2C
- Temperature Range: - 40...110 °C
- Dimensions: ø 19 mm x 5 mm
Series 4LD
-
The pressure transmitters of the 4LD series use the chip-in-oil technology developed by KELLER Pressure, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions.
Specifications
- Pressure Ranges: 0…3 to 0…200 bar
- Accuracy: ±0,15 %FS
- Total Error Band: ±0,7 %FS @ 0…50 °C
- Interfaces: I2C
- Dimensions: ø 11 mm x 4,2 mm
Series 7LC
-
The pressure transmitters of the 4LC series use the chip-in-oil developed by KELLER Pressure, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy. The transmitters are extremely resistant to environmental influences and deliver compensated measurement results as an analog, ratiometric 0,5...4,5V output signal over a wide temperature range.
Specifications
- Pressure Ranges: 0…2 to 0…200 bar
- Accuracy: ±0,25 %FS
- Total Error Band: ±1,0 %FS @ -10…80 °C
- Interfaces: 0,5…4,5 V ratiom.
- Dimensions: ø 15 mm x 5 mm
Series 9FLD
-
The 9FLD series is a special version of the 9LD pressure transmitter. The flanged housing can be mounted using an O-ring or welded on. As with all D-line products, the chip-in-oil technology developed by KELLER is used here, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy.The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions.
Specifications
- Pressure Ranges: 0…1 to 0…30 bar
- Accuracy: ±0,15 %FS
- Total Error Band: ±0,7 %FS @ -10…80 °C
- Interfaces: I2C
- Dimensions: ø 17 mm x 5,5 mm
Series 9LC
-
The pressure transmitters of the 9LC series use the chip-in-oil developed by KELLER Pressure, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy. The transmitters are extremely resistant to environmental influences and deliver compensated measurement results as an analog, ratiometric 0,5...4,5V output signal over a wide temperature range.
Specifications
- Pressure Ranges: 0…1 to 0…200 bar
- Accuracy: ±0,25 %FS
- Total Error Band: ±0,8 %FS @ -10…80 °C
- Interfaces: 0,5…4,5 V ratiom.
- Dimensions: ø 19 mm x 5 mm
Series 8LC
-
The pressure transmitters of the 8LC series use the chip-in-oil developed by KELLER Pressure, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy. The transmitters are extremely resistant to environmental influences and deliver compensated measurement results as an analog, ratiometric 0,5...4,5V output signal over a wide temperature range.
Specifications
- Pressure Ranges: 0…1 to 0…200 bar
- Accuracy: ±0,25 %FS
- Total Error Band: ±0,8 %FS @ -10…80 °C
- Interfaces: 0,5…4,5 V ratiom.
- Dimensions: ø 17 mm x 7 mm
Series 10LX
-
The OEM pressure transmitters of the 10LX series by KELLER are a combination of a pressure transducer from the Series 10L and the tried and tested X-line electronics. Both temperature dependence and non-linearity are precisely compensated for in the microcontroller by means of a mathematical model, thereby achieving the highest degree of accuracy. The 10LX owes its versatility to its compact design and robust stainless steel housing, which mean it can be used in a wide range of OEM applications.
Specifications
- Pressure Ranges: 0…0,3 to 0…200 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,1 %FS @ -10…80 °C
- Interfaces: RS485, 4…20 mA, 0…10 V
- Dimensions: ? 19mm x 57…96 mm
OEM High-Pressure Transmitters
Series 6LHPC
-
The high-pressure transmitters of the 6LHPC series use the chip-in-oil technology developed by KELLER Pressure, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Inconel. The transmitters are extremely resistant to environmental influences and deliver compensated measurement results as an analog, ratiometric 0,5...4,5V output signal over a wide temperature range.
Specifications
- Pressure Ranges: 0…200 to 0…1000 bar
- Accuracy: ±0,25 %FS
- Total Error Band: ±0,8 %FS @ -10…80 °C
- Interfaces: 0,5…4,5V ratiom.
- Dimensions: ø 13 mm x 8 mm
Series 7LHPC
-
The high-pressure transmitters of the 7LHPC series use the chip-in-oil technology developed by KELLER Pressure, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Inconel. The transmitters are extremely resistant to environmental influences and deliver compensated measurement results as an analog, ratiometric 0,5...4,5V output signal over a wide temperature range.
Specifications
- Pressure Ranges: 0…200 to 0…1000 bar
- Accuracy: ±0,25 %FS
- Total Error Band: ±0,8 %FS @ -10…80 °C
- Interfaces: 0,5...4,5V ratiom.
- Dimensions: ø 15 mm x 8 mm
Series 6LHPD
-
The pressure transmitters of the 6LHPD series for high pressure applications use the chip-in-oil technology developed by KELLER Pressure, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Inconel. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions.
Specifications
- Pressure Ranges: 0…400 to 0…1000 bar
- Accuracy: ±0,15 %FS
- Total Error Band: ±1,0 %FS @ -10…80 °C
- Interfaces: I2C
- Dimensions: ø 13 mm x 8 mm
Series 7LHPD
-
The pressure transmitters of the 7LHPD series for high pressure applications use the chip-in-oil technology developed by KELLER Pressure, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Inconel. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions.
Specifications
- Pressure Ranges: 0…400 to 0…1000 bar
- Accuracy: ±0,15 %FS
- Total Error Band: ±1,0 %FS @ -10…80 °C
- Interfaces: I2C
- Dimensions: ø 15 mm x 8 mm
- Intrinsic safety: Series 7LDEi
Intrinsically Safe OEM Pressure Transmitters
Series 4LD-Ei
-
The pressure transmitters of the 4LD-Ei series use the chip-in-oil technology developed by KELLER Pressure, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions. Intrinsically safe – suitable for use in explosive atmospheres.
Specifications
- Pressure Ranges: 0…3 to 0…200 bar
- Accuracy: ±0,15 %FS
- Total Error Band: ±0,7 %FS @ 0…50 °C
- Interfaces: I2C
- Dimensions: ø 11 mm x 4,2 mm
Series 6LHPD-Ei
-
The pressure transmitters of the 6LHPD-Ei series for high pressure applications use the chip-in-oil technology developed by KELLER Pressure, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Inconel. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions.
Specifications
- Pressure Ranges: 0…400 to 0…1000 bar
- Accuracy: ±0,15 %FS
- Total Error Band: ±1,0 %FS @ -10…80 °C
- Interfaces: I2C
- Dimensions: ø 13 mm x 8 mm
Series 7LD-Ei
-
The pressure transmitters of the 7LD-Ei series use the chip-in-oil technology developed by KELLER Pressure, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions.
Specifications
- Pressure Ranges: 0…3 to 0…200 bar
- Accuracy: ±0,15 %FS
- Total Error Band: ±0,7 %FS @ -10…80 °C
- Interfaces: I2C
- Dimensions: ø 15 mm x 5 mm
Series 7LHPD-Ei
-
The pressure transmitters of the 7LHPD-Ei series for high pressure applications use the chip-in-oil technology developed by KELLER Pressure, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Inconel. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions.
Specifications
- Pressure Ranges: 0…400 to 0…1000 bar
- Accuracy: ±0,q5 %FS
- Total Error Band: ±1,0 %FS @ -10…80 °C
- Interfaces: I2C
- Dimensions: ø 15 mm x 8 mm
Series 9LD-Ei
-
The pressure transmitters of the 9LD-Ei series use the chip-in-oil technology developed by KELLER Pressure, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions.
Specifications
- Pressure Ranges: 0…1 to 0…200 bar
- Accuracy: ±0,15 %FS
- Total Error Band: ±0,7 %FS @ -10…80 °C
- Interfaces: I2C
- Temperature Range: - 40...110 °C
- Dimensions: ø 19 mm x 5 mm
Series 9FLD-Ei
-
The 9FLD-Ei series is a special version of the 9LD-Ei pressure transmitter. The flanged housing can be mounted using an O-ring or welded on. As with all D-line products, the chip-in-oil technology developed by KELLER Pressure is used here, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy.The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions.
Specifications
- Pressure Ranges: 0…1 to 0…30 bar
- Accuracy: ±0,15 %FS
- Total Error Band: ±0,7 %FS @ -10…80 °C
- Interfaces: I2C
- Dimensions: ø 17 mm x 5,5 mm
Analog Pressure Transmitters
Series 23
-
The series 23 pressure transmitters are designed for industrial applications and are based on the highly stable pressure transducers of the 10L series and a fully analog circuit. Thanks to its modular concept, this series can be flexibly adapted to customer-specific pressure connections and connector plugs.
Specifications
- Pressure Ranges : 0…0,2 to 0…1000 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±4,0 %FS @ -10…80 °C
- Interfaces: 4…20 mA, 0…10 V
- Temperature Range: - 40...100 °C
- Pressure-resistant encapsulation: Serie 23Ed
Series 25
-
The series 25 pressure transmitters with a front-flush separating diaphragm are designed for industrial applications and are supplied with a G1/2" or G3/4" male pressure port. They are based on a fully analog circuit.
Specifications
- Pressure Ranges : 0…0,5 to 0…1000 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±4,0 %FS @ -10…80 °C
- Interfaces: 4…20 mA, 0…10 V
- Temperature Range: - 40...100 °C
Series PD-23
-
The differential pressure transmitters of the PD-23 series are designed for industrial applications and are supplied with a G1/4 internal thread as standard. They are based on a fully analog circuit. The PD-23 transmitters have a single silicon diaphragm in their interior, which is pressurised from both sides and measures the pressure difference directly. This design enables them to measure tiny pressure differences even at an extremely high line pressure.
Specifications
- Pressure Ranges : 0…0,2 to 0…20 bar
- Accuracy: ±0,5 %FS
- Total Error Band: ±4,0 %FS @ -10…80 °C
- Line pressure: 200 bar
- Interfaces: 4…20 mA, 0…10 V
- Temperature Range -40…100 °C
- Special characteristics: Classic 'wet/wet'
Level Probes
- Submersible probes for level and fill measurement. With a special design and cable and housing materials that have been chosen for compatibility with their surroundings, these probes can be used in a wide range of liquids.
Standard Level Probes
Series 36XW
-
In the high-precision level sensors of the 36XW series, the temperature dependence and nonlinearity are precisely compensated for in the microcontroller by means of a mathematical model. In addition to the RS485 interface, the measurement results can also be output via the integrated D/A converter as a rangeable analog signal. Extended lightning protection is also available as an option.
Specifications
- Pressure Ranges : 0…0,3 to 0…30 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,1 %FS @ 0…50 °C
- Interfaces : RS485, 4…20 mA, 0…10 V
- Special characteristics: Optimum accuracy
Series 26Y
-
The level sensors of the 26Y series are budget-friendly, but still offer high accuracy and excellent long-term stability. They are available in versions for absolute or relative pressure. With a start-up time of just 5 ms, the Y line is ideally suited to data logger applications.
Specifications
- Pressure Ranges : 0…0,1 to 0…10 bar
- Accuracy: ±0,25 %FS
- Total Error Band: ±0,5 %FS @ 0…50 °C
- Interfaces : 4…20 mA, 0…10 V
- Special characteristics: Compact design
Series 36KyX
-
The 36KyX series was specially developed for brackish water and sewage applications. It is equipped with a non-fouling Kynar separating diaphragm, which combines the anti-adhesion properties of PTFE with outstanding hardness and abrasion resistance. This level sensors design can be readily installed in harsh environments, eliminating the need for bulky, costly protective equipment. In addition to the RS485 interface, the measurement results can also be output via the integrated D/A converter as a rangeable analog signal.
Specifications
- Pressure Ranges : 0…1 to 0…10 bar
- Accuracy: ±0,3 %FS
- Total Error Band: ±0,5 %FS @ 0…50 °C
- Interfaces : RS485, 4…20 mA, 0…10 V
- Special characteristics: Plastic diaphragm
Series 46X
-
The level sensors of the 46X series combine a ceramic measuring cell for very low measuring ranges on the mbar scale with microprocessor electronics for compensating for temperature dependence and nonlinearity. In addition to the digital RS485 interface, the sensors also have a rangeable analog output.
Specifications
- Pressure Ranges : 0…0,03 to 0…0,3 bar
- Accuracy: ±0,1 %FS
- Total Error Band: ±0,2 %FS @ 10…50 °C
- Interfaces : RS485, 4…20 mA, 0…10 V
- Special characteristics: Ceramic measuring cell
Series 36XiW
-
The high-precision level sensors of the 36XiW series measure with ultra-high accuracy and resolution. Temperature dependence and nonlinearity are precisely compensated for in the microprocessor by means of a mathematical model. They can be supplied with either an RS485 or SDI-12 interface. In addition to the pressure sensor for the level measurement, it is also possible to integrate a Pt1000 that is calibrated to ±0,1 °C from 0...50 °C. Extended lightning protection comes as standard with the SDI-12 interface and is available as an option for the RS485 interface.
Specifications
- Pressure Ranges : 0…1 to 0…10 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,1 %FS @ 0…50 °C
- Interfaces : RS485, SDI-12
- Special characteristics: Maximum resolution
Series 36XS
-
With a small diameter of just 16 mm, these level sensors are ideally suited to use in small spaces, such as narrow monitoring pipes. The measurement results can be read out via the 4...20 mA output or the RS485 interface. Extended lightning protection is integrated as standard.
Specifications
- Pressure Ranges : 0…1 to 0…30 bar
- Accuracy: ±0,3 %FS
- Total Error Band: ±0,5 %FS @ 0…50 °C
- Interfaces : RS485, 4…20 mA, 0…10 V
- Special characteristics: Plastic diaphragm
Series 26W
-
The level sensors of the 26W series were developed for level measurements in bodies of water, but can also be used in fuel tanks or monitoring pipes. They are based on the highly stable and extensively tested relative pressure transducer of the 10L series and a fully analog circuit. For highly aggressive media, separating diaphragms and housing parts are available in special materials such as Hastelloy or Inconel instead of stainless steel.
Specifications
- Pressure Ranges : 0…0,2 to 0…20 bar
- Accuracy: ±0,5 %FS
- Total Error Band: ±1,25 %FS @ 0…50 °C
- Interfaces : 4…20 mA, 0…10 V
- Special characteristics: Analog only
Intrinsically Safe Level Probes
Series 26Y-Ei
-
The level sensors of the 26Y-Ei series are budget-friendly, but still offer high accuracy and excellent long-term stability. They are available in versions for absolute or relative pressure. With a start-up time of just 5 ms, the Y line is ideally suited to data logger applications.
Intrinsically safe – suitable for use in explosive atmospheres.Specifications
- Pressure Ranges : 0…0,1 to 0…10 bar
- Accuracy: ±0,25 %FS
- Total Error Band: ±0,5 %FS @ 0…50 °C
- Interfaces : 4…20 mA, 0…10 V
- Special characteristics: Compact design
Series 36XW-Ei
-
In the high-precision level pressure transmitters of the 36XW-Ei series, the temperature dependence and nonlinearity are precisely compensated for in the microcontroller by means of a mathematical model. In addition to the RS485 interface, the measurement results can also be output via the integrated D/A converter as a rangeable analog signal. Extended lightning protection is also available as an option.
Intrinsically safe – suitable for use in explosive atmospheres.Specifications
- Pressure Ranges : 0…0,3 to 0…30 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,1 %FS @ 0…50 °C
- Interfaces : RS485, 4…20 mA, 0…10 V
- Special characteristics: Optimum accuracy
Series 46X-Ei
-
The level sensors of the 46X-Ei series combine a ceramic measuring cell for very low measuring ranges on the mbar scale with microprocessor electronics for compensating for temperature dependence and nonlinearity. In addition to the digital RS485 interface, the sensors also have a rangeable analog output.
Intrinsically safe – suitable for use in explosive atmospheres.Specifications
- Pressure Ranges : 0…0,03 to 0…0,3 bar
- Accuracy: ±0,1 %FS
- Total Error Band: ±0,2 %FS @ 10…50 °C
- Interfaces : RS485, 4…20 mA, 0…10 V
- Special characteristics: Ceramic measuring cell
Multi-Parameter Probes
Series 36XiW-CTD
-
The high-precision multi-parameter probes of the 36XiW-CTD series measure conductivity and temperature as well as pressure, along with the depth of bodies of water. Temperature dependence and nonlinearity are precisely compensated for in the microcontroller by means of a mathematical model. The integrated Pt1000 achieves an accuracy of ±0,1 °C, and the conductivity can be measured at ± 2,5% of the selected range (0,2 / 2 / 20 / 200 mS/cm). The sensors can be supplied with either an RS485 or SDI-12 interface. Extended lightning protection comes as standard with the SDI-12 and is available as an option for the RS485 interface.
Specifications
- Pressure Ranges : 0…0,3 to 0…30 bar
- Accuracy: ±0,05 %FS
- Total Error Band: 0,1 %FS @ 0…50 °C
- Interfaces : RS485, SDI-12
- Special characteristics: Additional conductivity measurement
Data Loggers
- A variety of data logger designs for recording the pressure and temperature profile. Depending on the system, the data is read out via a plug connection or via remote transfer.
Level Loggers
DCX-22
-
The DCX-22 data loggers achieve greater measurement accuracy than loggers with a smaller diameter. Thanks to their long-life battery, they can keep measuring the water level, water pressure and temperature for years (up to 10 years at a rate of one measurement per hour). The data logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.
Specifications
- Pressure Ranges : 0…0,3 to 0…30 bar
- Total Error Band: 0,1 %FS @ 0…50 °C
- Reading capacity: 57'000 measuring points
- Dimensions : ø 22 mm
- Special characteristics: Also available in ECO design
DCX-22AA
-
The DCX-22AA data loggers compensate for changes in air pressure by means of a separate, water-tight absolute pressure sensor with a stainless steel separating diaphragm. Unlike gauge pressure systems with a capillary tube, this system is completely resistant to moisture and can therefore be immersed. Thanks to their long-life battery, they can keep measuring the water level, water pressure and temperature for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.
Specifications
- Pressure Ranges : 0…5 to 0…10 mH2O
- Total Error Band: ±0,1 %FS @ -10…40 °C
- Reading capacity: 57'000 measuring points
- Dimensions : ø 22 mm
- Special characteristics: With integrated barometer
DCX-22-ECO
-
The DCX-22-ECO data loggers are a cost-effective alternative to the highly accurate DCX-22 loggers and are only available in the cable-free «cigar» design. Thanks to their long-life battery, they can keep measuring the water level, water pressure and temperature for years (up to 10 years at a rate of one measurement per hour). The data logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.
Specifications
- Pressure Ranges : 0…10 to 0…100 mH2O
- Total Error Band: ±0,25 %FS @ -10…40 °C
- Reading capacity: 114'000 measuring points
- Dimensions : ø 22 mm
- Special characteristics: With USB interface
DCX-16
-
The DCX-16 data loggers have a diameter of just 16 mm and can be used in tight spaces. Thanks to their long-life battery, they can keep measuring the water level, water pressure and temperature for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.
Specifications
- Pressure Ranges : 0…10 to 0…100 mH2O
- Total Error Band: ±0,1 %FS @ -10…40 °C
- Reading capacity: 57'000 measuring points
- Dimensions : ø 16 mm
- Special characteristics: Slender design
DCX-25PVDF
-
The DCX-25PVDF data loggers have been specially designed for use in aggressive liquids such as brackish water and sewage. The housing is made of polyvinylidene fluoride and the installed pressure transducer is available in Hastelloy C-276 or titanium 6AL-4V. Thanks to their long-life battery, they can keep measuring the water level, water pressure and temperature for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.
Specifications
- Pressure Ranges : 0…10 to 0…100 mH2O
- Total Error Band: ±0,1 %FS @ -10…40 °C
- Reading capacity: 57'000 measuring points
- Dimensions : ø 25 mm
- Special characteristics: Special plastic housing
DCX-38
-
The DCX-38 data loggers are designed for water level measurements with a high resolution in the mbar range. They can detect water levels with a total error band of just 1 mm (measuring range 0,5 m water column, compensated temperature range -10...40 °C). Thanks to their long-life battery, they can keep measuring the water level, water pressure and temperature for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, converted into fill levels or other units, and exported.
Specifications
- Pressure Ranges : 0…0,5 to 0…3mH2O
- Total Error Band: ±0,2 %FS @ -10…40 °C
- Reading capacity: 57'000 measuring points
- Dimensions : ø 38 mm
- Special characteristics: Capacitive sensor
Multi-Parameter Loggers
DCX-22-CTD
-
The DCX-22-CTD data loggers measure conductivity and temperature as well as pressure, along with the depth of bodies of water. The integrated Pt1000 achieves an accuracy of ±0,1 °C, and the conductivity can be measured at ± 2,5% of the selected range (0,2 / 2 / 20 / 200 mS/cm). Thanks to their long-life battery, they can keep recording measurement results for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.
Specifications
- Pressure Ranges : 0…10 to 0…100 mH2O
- Total Error Band: ± 0,1%FS @ -10…40 °C
- Reading capacity: 114'000 measuring points
- Dimensions : ø 22 mm
- Special characteristics: Additional conductivity measurement
DCX-22AA-CTD
-
The DCX-22AA-CTD data loggers measure conductivity and temperature as well as pressure, along with the depth of bodies of water. They compensate for the air pressure using an additional, water-tight absolute pressure sensor with a stainless steel separating diaphragm. Unlike gauge pressure systems with a capillary tube, this system is completely resistant to moisture and can therefore be immersed. Thanks to their long-life battery, they can keep recording measurement results for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.
Specifications
- Pressure Ranges : 0…10 to 0…100 mH2O
- Total Error Band: ±0,1 %FS @ -10…40 °C
- Reading capacity: 114'000 measuring points
- Dimensions : ø 22 mm
- Special characteristics: Additional conductivity measurement
Pressure Loggers
LEO-Record
-
The high-accuracy LEO-Record digital manometers can record pressure and temperature autonomously for long periods thanks to their memory function. The data logger can be connected to a computer via the RS485 interface for configuration and for reading out the recorded data. The current pressure value can be displayed in a wide variety of units of pressure. Power is supplied by a high-quality 3,6 V lithium battery.
Specifications
- Pressure Ranges : -1…3 to 0…1000 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,1 %FS @ 0…50 °C
- Interfaces: RS485
- Special characteristics: Measured value recording
- Display : 5-digit LCD display
- Reading capacity: 57'000 measuring points
LEO5
-
The LEO5 digital manometers combine a range of functions from other KELLER Pressure manometers in a water-tight stainless steel housing. They can detect pressure peaks with a measurement interval of 5 kHz and record all measurements. Current measured values and saved data can be read out via the USB connection. The pressure values can be shown on the extra-large display in a wide range of units of pressure, which are either pre-programmed or configured by the user.
Specifications
- Pressure Ranges : -1…1 to 0…1000 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,1 %FS @ 0…50 °C
- Interfaces: USB
- Special characteristics: All-rounder
- Display : 5-digit LCD display
- Reading capacity: 56'000 measuring points
21DC-RFID
-
The series 21DC RFID combines the digital and extremely robust D-line pressure transmitters and data logger electronics with an RFID interface. The built-in battery has a lifespan of 5 to 10 years. The pressure and temperature values are each saved as a pair of numbers in the memory. Instantaneous values and saved data can still be read if the battery is flat, because power is supplied by the reader.
Specifications
- Pressure Ranges : 0…3 to 0…1000 bar
- Accuracy: ±0,15 %FS
- Total Error Band: ±0,7 %FS @ -10…80 °C
- Interfaces: RFID
- Special characteristics: Data logger with battery
- Reading capacity: 32'000 measuring points
Remote Transmission Units with Data Logger
ADT1-Tube
-
The remote data transmission unit ADT1-Tube is encased in a robust, stainless steel housing, which is ideally suited to installation in 2" monitoring pipes. The LoRa module, which can be configured on a country-specific basis, establishes a connection with the Internet and makes it possible to collect measurement data in a low-cost and energy-saving manner. These autonomous devices can be linked with digital level sensors and pressure transmitters in the KELLER Pressure D and X product lines. With three conventional, high-quality AA batteries, the system can operate autonomously for up to 5 years. The LoRaWAN provider can be selected freely or an in-house or open source infrastructure and associated services can be used. The easiest and most convenient way to access the collected data at the end of the transmission chain is via PressureSuite Cloud from KELLER Pressure.
Specifications
- Electrical Connection : LoRa
- Sensor Interfaces: RS485, I2C
- Battery life: Up tp 5 years
- Dimensions: ø 43 mm x 165 mm
- Special characteristics: For 2" monitoring pipes
ADT1-Box
-
The remote data transmission unit ADT1-Box is encased in a robust, water-tight plastic housing. The LoRa module, which can be configured on a country-specific basis, establishes a connection with the Internet and makes it possible to collect measurement data in a low-cost and energy-saving manner. These autonomous devices can be linked with digital level sensors and pressure transmitters in the KELLER Pressure D and X product lines. With three conventional, high-quality AA batteries, the system can operate autonomously for up to 5 years. The LoRaWAN provider can be selected freely or an in-house or open source infrastructure and associated services can be used. The easiest and most convenient way to access the collected data at the end of the transmission chain is via PressureSuite Cloud from KELLER Pressure.
Specifications
- Electrical Connection : LoRa
- Sensor Interfaces: RS485, I2C
- Battery life: Up tp 5 years
- Dimensions: ø 162 x 82 x 54 mm
- Special characteristics: For wall installation
ARC1-Tube
-
The remote data transmission unit ARC1-Tube with logger function is encased in a robust, stainless steel housing, which is ideally suited to installation in 2" monitoring pipes. This unit records measurements made by external sensors (e.g. a level sensor) and periodically transmits the collected data via 2G, 3G, 4G or LoRaWAN. The high-performance battery and sophisticated power management enable autonomous operation for up to 10 years. KELLER Pressure provides a range of licence-free software solutions for configuration and data processing. The easiest and most convenient way to access the collected data is via PressureSuite Cloud.
Specifications
- Electrical Connection : 2G / 3G / 4G / LoRa
- Sensor Interfaces: RS485, SDI-12, analog, digital
- Battery life: Up to 10 years
- Dimensions: ø 48 mm x 330 mm
- Special characteristics: For 2" monitoring pipes
- Battery: Lithium / DD / 3.9 V / 35 Ah
- Reading capacity: 56'000
ARC1-Box
-
The remote data transmission unit ARC1-Box with logger function is encased in a robust, water-tight aluminium housing. This unit records measurements made by external sensors (e.g. a level sensor) and periodically transmits the collected data via 2G, 3G, 4G or LoRaWAN. The high-performance battery and sophisticated power management enable autonomous operation for up to 10 years. KELLER Pressure provides a range of licence-free software solutions for configuration and data processing. The easiest and most convenient way to access the collected data is via PressureSuite Cloud.
Specifications
- Electrical Connection : 2G / 3G / 4G / LoRa
- Sensor Interfaces: RS485, SDI-12, analog, digital
- Battery life: Up to 10 years
- Dimensions: 200 x 100 x 81 mm
- Special characteristics: For wall installation
ARC1-Box-SB
-
The remote data transmission unit ARC1-Box-SB with logger function is equipped with safety barriers and, in combination with intrinsically safe transmitters, it is suitable for use in hazardous applications. The unit is encased in a robust, water-tight aluminium housing. It records measurements made by external sensors (e.g. a level sensor) and periodically transmits the collected data via 2G, 3G, 4G or LoRaWAN. The high-performance battery and sophisticated power management enable autonomous operation for up to 10 years. KELLER Pressure provides a range of licence-free software solutions for configuration and data processing. The easiest and most convenient way to access the collected data is via PressureSuite Cloud.
Specifications
- Electrical Connection : 2G / 3G / 4G / LoRa
- Sensor Interfaces: RS485, SDI-12, analog, digital
- Battery life: Up to 10 years
- Dimensions: 180 x 180 x 72 mm
- Special characteristics: For intrinsically safe transmitters
Digital Pressure Gauges
- High-quality digital manometers with easily readable displays and practical additional functions. Display units for use with KELLER Pressure transmitters or for processing standard signals from other sources.
Digital Pressure Gauges
LEX1
-
The high precision of the LEX1 digital manometers makes them ideally suited to calibration and test applications. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. Power is supplied by a conventional CR2430 coin cell battery (provided).
Specifications
- Pressure Ranges : 0…0,03 to 0…1000 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,05 %FS @ 0…50 °C
- Interfaces: RS485
- Special characteristics: Precision of up to 0,01 %FS
- Display : 5-digit LCD display
LEO1
-
The LEO1 digital manometers have a measuring interval of 5000 individual measurements per second, which allows them to record fast pressure peaks. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. Power is supplied by a conventional CR2430 coin cell battery (provided).
Specifications
- Pressure Ranges : -1…3 to 0…1000 bar
- Accuracy: ±0,1 %FS
- Total Error Band: ±0,2 %FS @ 0…50 °C
- Interfaces: none
- Special characteristics: Peak recording
- Display : 4-digit LCD display
LEO2
-
The compact LEO2 digital manometers are budget-friendly and provide high accuracy. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. The swivel adapter allows the device to be optimally positioned. Power is supplied by a conventional CR2430 coin cell battery (provided).
Specifications
- Pressure Ranges : 0…4 to 0…700 bar
- Accuracy: ±0,1 %FS
- Total Error Band: ±0,2 %FS @ 0…50 °C
- Interfaces: none
- Special characteristics: Compact and precise
- Display : 4-digit LCD display
ECO2
-
The compact ECO2 digital manometers are budget-friendly and provide a good resolution. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. The swivel adapter allows the device to be optimally positioned. Power is supplied by a conventional CR2430 coin cell battery (provided).
Specifications
- Pressure Ranges : 0…31 to 0…300 bar
- Accuracy: ±0,5 %FS
- Total Error Band: ±1,0 %FS @ 0…50 °C
- Interfaces: none
- Special characteristics: Compact and economical
- Display : 4-digit LCD display
LEO5
-
The LEO5 digital manometers combine a range of functions from other KELLER Pressure manometers in a water-tight stainless steel housing. They can detect pressure peaks with a measurement interval of 5 kHz and record all measurements. Current measured values and saved data can be read out via the USB connection. The pressure values can be shown on the extra-large display in a wide range of units of pressure, which are either pre-programmed or configured by the user.
Specifications
- Pressure Ranges : -1…1 to 0…1000 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,1 %FS @ 0…50 °C
- Interfaces: USB
- Special characteristics: All-rounder
- Display : 5-digit LCD display
- Reading capacity: 56'000 measuring points
LEO-Record
-
The high-accuracy LEO-Record digital manometers can record pressure and temperature autonomously for long periods thanks to their memory function. The data logger can be connected to a computer via the RS485 interface for configuration and for reading out the recorded data. The current pressure value can be displayed in a wide variety of units of pressure. Power is supplied by a high-quality 3,6 V lithium battery.
Specifications
- Pressure Ranges : -1…3 to 0…1000 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,1 %FS @ 0…50 °C
- Interfaces: RS485
- Special characteristics: Measured value recording
- Display : 5-digit LCD display
- Reading capacity: 57'000 measuring points
LEO3
-
The LEO3 digital manometers also output the pressure values as an analog signal for display purposes and have an RS485 interface for integration in bus systems and communication with computers. The current 4...20 mA measured value is shown on the display at the same time as the pressure value. The minimum or maximum value since the last reset can also be displayed at the touch of a button. Power is supplied directly via the 4...20 mA circuit.
Specifications
- Pressure Ranges : -1…3 to 0…1000 bar
- Accuracy: ±0,1 %FS
- Total Error Band: ±0,2 %FS @ 0…50 °C
- Interfaces: RS485, 4…20 mA
- Special characteristics: 4…20 mA output
- Display : 4-digit LCD display
Intrinsically Safe Digital Pressure Gauges
LEX1-Ei
-
The high precision of the LEX1-Ei digital manometers makes them ideally suited to calibration and test applications. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. Power is supplied by a conventional CR2430 coin cell battery (provided).
Intrinsically safe – suitable for use in explosive atmospheres.Specifications
- Pressure Ranges : 0…0,03 to 0…1000 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,05 %FS @ 0…50 °C
- Interfaces: RS485
- Special characteristics: Precision of up to 0,01 %FS
- Display : 5-digit LCD display
LEO-Record-Ei
-
The high-accuracy LEO-Record-Ei digital manometers can record pressure and temperature autonomously for long periods thanks to their memory function. The data logger can be connected to a computer via the RS485 interface for configuration and for reading out the recorded data. The current pressure value can be displayed in a wide variety of units of pressure. Power is supplied by a high-quality 3,6 V lithium battery.
Intrinsically safe – suitable for use in explosive atmospheres.Specifications
- Pressure Ranges : -1…3 to 0…1000 bar
- Accuracy: ±0,05 %FS
- Total Error Band: ±0,1 %FS @ 0…50 °C
- Interfaces: RS485
- Special characteristics: Measured value recording
- Display : 5-digit LCD display
- Reading capacity: 57'000 measuring points
LEO1-Ei
-
The LEO1-Ei digital manometers have a measuring interval of 5000 individual measurements per second, which allows them to record fast pressure peaks. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. Power is supplied by a conventional CR2430 coin cell battery (provided).
Intrinsically safe – suitable for use in explosive atmospheres.Specifications
- Pressure Ranges : -1…3 to 0…1000 bar
- Accuracy: ±0,1 %FS
- Total Error Band: ±0,2 %FS @ 0…50 °C
- Interfaces: none
- Special characteristics: Peak recording
- Display : 4-digit LCD display
LEO2-Ei
-
The compact LEO2-Ei digital manometers are budget-friendly and provide high accuracy. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. The swivel adapter allows the device to be optimally positioned. Power is supplied by a conventional CR2430 coin cell battery (provided).
Intrinsically safe – suitable for use in explosive atmospheres.Specifications
- Pressure Ranges : 0…4 to 0…700 bar
- Accuracy: ±0,1 %FS
- Total Error Band: ±0,2 %FS @ 0…50 °C
- Interfaces: none
- Special characteristics: Compact and precise
- Display : 4-digit LCD display
ECO2-Ei
-
The compact ECO2-Ei digital manometers are budget-friendly and provide a good resolution. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. The swivel adapter allows the device to be optimally positioned. Power is supplied by a conventional CR2430 coin cell battery (provided).
Intrinsically safe – suitable for use in explosive atmospheres.Specifications
- Pressure Ranges : -1…30 to 0…300 bar
- Accuracy: ±0,5 %FS
- Total Error Band: ±1,0 %FS @ 0…50 °C
- Interfaces: none
- Special characteristics: Compact and economical
- Display : 4-digit LCD display
Digital Pressure Gauges DaVinci Line
dV2
-
digital manometers in the dV2 series from KELLER Pressure have versatile configuration options, with a max/min and zero function. The integrated microcontroller makes it possible to achieve [Genauigkeit|accuracies]] of up to 0,1 %FS. Larger unit quantities can also be programmed with tailored device functions in preparation for their subsequent use. The dV2 manometers are available with a range of housing designs and process connections, and can also be obtained as an OEM module.
Specifications
- Pressure Ranges : -1…3 to 0…700 bar
- Accuracy: ±0,1 %FS
- Total Error Band: ±0,1 %FS @ 10…40 °C
- Special characteristics: Also available as OEM module
- Interfaces: none
- Display : 5-digit LCD display
dV2cool
-
The dV2cool has been specially developed for monitoring activities at coolant filling stations. The vapour pressure curves of five different coolants are saved in the device and can be selected at the touch of a button: R22, R12, R507, R404a, R134a. Other coolants can be configured upon request. With just one press of a button, the LCD switches between the temperature and pressure display, which can be provided in bar/°C or PSI/°F.
Specifications
- Pressure Ranges : -1…40 to -1…80 bar
- Accuracy: ±0,1 %FS
- Total Error Band: ±0,1 %FS @ 0…50 °C
- Special characteristics: Stored vapour pressure curves
- Interfaces: none
- Display : 5-digit LCD display
dV2-PS
-
The dV2-PS pressure switches with display screen are, in principle, a manometer with two programmable switch outputs. The switches can be programmed independently as normally closed or normally open at a range of switching points with a window or hysteresis function. This is done either directly using the two operating buttons, or via the RS485 interface and an interface converter on a computer. The digitally compensated measurement signal achieves an accuracy of 0,1 %FS and the data can be displayed in bar, MPA or PSI, or read out via the interface.
Specifications
- Pressure Ranges : 0…4 to 0…700 bar
- Accuracy: ±0,1 %FS
- Total Error Band: ±0,1 %FS @ 0…50 °C
- Special characteristics: Programmable pressure switch
- Interfaces: RS485, 2x switch output
- Display : 5-digit LCD display
Indicators
dV22-PP
-
The dV22-PP programming unit displays the current measured value from series PA-22-PS pressure switches and configures their switch outputs. In addition to setting the switching points – with a window if necessary – and the hysteresis function, it can also be used to change the pressure switch from normally closed to normally open operation and vice versa.
Specifications
- Sensor Interfaces : Fits to PA-22-PS
- Display : 5-digit LCD display
- Interfaces: RS485, 2x switch output
- Special characteristics: Programming unit for PA-22PS
Wireless Solutions
- Devices for measuring and transmitting pressure values via wireless interfaces such as LoRa, Bluetooth, 2G, 3G, 4G and RFID. Alarm notifications, switch outputs and additional extras round out the range of functions on offer.
Remote Transmission Units
ADT1-Tube
-
The remote data transmission unit ADT1-Tube is encased in a robust, stainless steel housing, which is ideally suited to installation in 2" monitoring pipes. The LoRa module, which can be configured on a country-specific basis, establishes a connection with the Internet and makes it possible to collect measurement data in a low-cost and energy-saving manner. These autonomous devices can be linked with digital level sensors and pressure transmitters in the KELLER Pressure Pressure D and X product lines. With three conventional, high-quality AA batteries, the system can operate autonomously for up to 5 years. The LoRaWAN provider can be selected freely or an in-house or open source infrastructure and associated services can be used. The easiest and most convenient way to access the collected data at the end of the transmission chain is via PressureSuite Cloud from KELLER Pressure.
Specifications
- Electrical Connection : LoRa
- Sensor Interfaces: RS485, I2C
- Battery life: Up tp 5 years
- Dimensions: ø 43 mm x 165 mm
- Special characteristics: For 2" monitoring pipes
ADT1-Box
-
The remote data transmission unit ADT1-Box is encased in a robust, water-tight plastic housing. The LoRa module, which can be configured on a country-specific basis, establishes a connection with the Internet and makes it possible to collect measurement data in a low-cost and energy-saving manner. These autonomous devices can be linked with digital level sensors and pressure transmitters in the KELLER Pressure D and X product lines. With three conventional, high-quality AA batteries, the system can operate autonomously for up to 5 years. The LoRaWAN provider can be selected freely or an in-house or open source infrastructure and associated services can be used. The easiest and most convenient way to access the collected data at the end of the transmission chain is via PressureSuite Cloud from KELLER Pressure.
Specifications
- Electrical Connection : LoRa
- Sensor Interfaces: RS485, I2C
- Battery life: Up tp 5 years
- Dimensions: ø 162 x 82 x 54 mm
- Special characteristics: For wall installation
ARC1-Tube
-
The remote data transmission unit ARC1-Tube with logger function is encased in a robust, stainless steel housing, which is ideally suited to installation in 2" monitoring pipes. This unit records measurements made by external sensors (e.g. a level sensor) and periodically transmits the collected data via 2G, 3G, 4G or LoRaWAN. The high-performance battery and sophisticated power management enable autonomous operation for up to 10 years. KELLER Pressure provides a range of licence-free software solutions for configuration and data processing. The easiest and most convenient way to access the collected data is via PressureSuite Cloud.
Specifications
- Electrical Connection : 2G / 3G / 4G / LoRa
- Sensor Interfaces: RS485, SDI-12, analog, digital
- Battery life: Up to 10 years
- Dimensions: ø 48 mm x 330 mm
- Special characteristics: For 2" monitoring pipes
- Battery: Lithium / DD / 3.9 V / 35 Ah
- Reading capacity: 56'000
ARC1-Box
-
The remote data transmission unit ARC1-Box with logger function is encased in a robust, water-tight aluminium housing. This unit records measurements made by external sensors (e.g. a level sensor) and periodically transmits the collected data via 2G, 3G, 4G or LoRaWAN. The high-performance battery and sophisticated power management enable autonomous operation for up to 10 years. KELLER Pressure provides a range of licence-free software solutions for configuration and data processing. The easiest and most convenient way to access the collected data is via PressureSuite Cloud.
Specifications
- Electrical Connection : 2G / 3G / 4G / LoRa
- Sensor Interfaces: RS485, SDI-12, analog, digital
- Battery life: Up to 10 years
- Dimensions: 200 x 100 x 81 mm
- Special characteristics: For wall installation
ARC1-Box-SB
-
The remote data transmission unit ARC1-Box-SB with logger function is equipped with safety barriers and, in combination with intrinsically safe transmitters, it is suitable for use in hazardous applications. The unit is encased in a robust, water-tight aluminium housing. It records measurements made by external sensors (e.g. a level sensor) and periodically transmits the collected data via 2G, 3G, 4G or LoRaWAN. The high-performance battery and sophisticated power management enable autonomous operation for up to 10 years. KELLER Pressure Pressure provides a range of licence-free software solutions for configuration and data processing. The easiest and most convenient way to access the collected data is via PressureSuite Cloud.
Specifications
- Electrical Connection : 2G / 3G / 4G / LoRa
- Sensor Interfaces: RS485, SDI-12, analog, digital
- Battery life: Up to 10 years
- Dimensions: 180 x 180 x 72 mm
- Special characteristics: For intrinsically safe transmitters
Bluetooth
K-114BT
-
The K-114BT interface converters enable communication between KELLER Pressure devices with an RS485 interface and a computer via Bluetooth and USB.
Specifications
- Interfaces : USB, Bluetooth classic
- Sensor Interfaces: RS485, 0…150 mA, 0…12 V
- Sensor power supply: 15 VDC
- Display : Status-LED
- Special characteristics: Rechargeable battery
- Pressure Ranges : Corresponds to connected device
- Accuracy: Corresponds to connected device
RFID
21D-RFID
-
The compact pressure transponders consist of a digital, extremely robust D-line pressure transmitter and a passive RFID module. They obtain their power from the reader and therefore do not require a power connection or battery replacement. The 21D RFID transponders are therefore perfect for convenient on-side reading of instantaneous values, e.g. during inspection tours or safety checks on large vehicles.
Specifications
- Pressure Ranges : 0…3 to 0…1000 bar
- Accuracy: ±0,15 %FS
- Total Error Band :±0,7 %FS @ -10…80 °C
- Reading capacity: none
- Special characteristics: Pressure transponder (passive)
21DC-RFID
-
The series 21DC RFID combines the digital and extremely robust D-line pressure transmitters and data logger electronics with an RFID interface. The built-in battery has a lifespan of 5 to 10 years. The pressure and temperature values are each saved as a pair of numbers in the memory. Instantaneous values and saved data can still be read if the battery is flat, because power is supplied by the reader.
Specifications
- Pressure Ranges : …3 to 0…1000 bar
- Accuracy: ±0,15 %FS
- Total Error Band :±0,7 %FS @ -10…80 °C
- Interfaces : RFID
- Reading capacity: 32'000 measurement pairs
- Special characteristics: Data logger with battery
Custom Solutions
- Wherever pressure sensors are needed, a solution can normally be found in the KELLER Pressure standard product catalog. However, there are often great benefits to optimising a product specifically for integration and use in existing complete systems. In addition to outwardly identifiable components such as housing parts or plugs, this also includes the inner workings of the sensor. We produce a large number of individual parts in-house and establish close working relationships with our suppliers, enabling us to make a wide variety of modifications with ease.
Measuring ranges & performance
- First of all, we define the basic sensor specifications such as overall measuring range, accuracy, calibration to specific measuring points and units of pressure, or scaling of the output signal. Products with a digital signal output have additional factors that also need to be determined, such as sampling rate or signal resolution. The values defined at this stage form the starting point for selecting components.
Perfectly tuned to the ambient conditions
- Another crucial requirement is taking the ambient conditions into consideration. Not only does this increase the service life of the sensor, it is also an essential prerequisite for correct measurements. If the pressurised system operates with a large overpressure or with dynamic loads, the sensor design must be optimised for these particular demands. With some applications or neighbouring system parts, there is a risk of signal distortion or component failure due to vibration or shock. Temperature also has a major impact on all materials and their resistance. Complications can be caused not just by extreme temperature values but also by rapid changes in temperature. Another equally important factor is chemical resistance. The materials used for housings and seals must be carefully selected, otherwise they risk being damaged by aggressive measuring media. External factors such as petrol fumes, UV radiation, salt water or even microorganisms can also cause problems. It is therefore essential that all relevant factors be considered. Of course, even finely tuned designs still have limits, and additional protective measures may be needed.
Mechanical design
- When designing a sensor, all the above points must be taken into consideration. A device's performance is heavily influenced by the sensor design, from the choice of sensor chip and coupling medium through to the materials and production techniques used. In addition, customers may have particular requests concerning shape and size, pressure connections and so on. And of course, any specific requirements pertaining to the area of application must be complied with, along with all the applicable legal regulations and standards.
Electronics & configuration
- The main function of the electronics is to prepare the measurement signal, as well as possibly to save it and output it via a suitable interface. Customers can also request that application-specific calculations be integrated in the firmware, or ask for special device and software configurations. Once again, there are other requirements that depend on the environment, such as extended lightning protection, EMC or explosion protection. Intrinsically safe products can also be specially configured to match the parameters of the customer's overall system.
Electrical interfaces & connections
- Digital interfaces can be configured for specific communication protocols, or modified to suit the customer's needs. Meanwhile, analog interfaces also continue to play a vital role in sensor technology. KELLER Pressure is highly experienced in developing application-specific solutions based on both of these principles, including devices with light wave and frequency outputs. For electrical connections, the necessary plugs can be integrated into the design, while cable outlets can be specified by the customer.
Labelling
- In addition to customer logos, it is also possible to have functional markings applied to the product, either by means of laser inscription or by printing information on labels. These may include part codes, serial numbers, data matrix codes or guide marks. Customers can also specify a colour-coding scheme for the connecting wires. For consumer products such as manometers, a personalised design that includes the customer's logo can be applied to the front panel.
