Navigation : EXPO21XX > IOT AND INDUSTRY 4.0 21XX > H06: Smart Factory > TECHNOSOFT
Videos
Loading the player ...
  • Offer Profile
  • Technosoft is a leading DSP motion control technology company specialized in digital motion control products and custom motion systems - intelligent servo drives and motors - based on MotionChipTM, a motion control dedicated DSP.

    Through embedded intelligence and easy high-level software programmability, Technosoft digital servo/stepper drives and motors offer ideal solutions for a large variety of applications ranging from medical, industrial, textile to semiconductors factory automation.
Product Portfolio
  • Intelligent Drives

  • Technosoft's iPOS line of intelligent drives is based on a new design concept that has resulted in cost-effective, compact, modular solutions to the position, speed and torque control of rotary or linear brushless, DC brush, and step motors. Designed to cover both low-volume and high-volume applications, the iPOS intelligent drives integrate all basic motor control functions and motion control features in a single module. With the development of the new iPOS intelligent drives family, Technosoft has also extended the concept of distributed motion control. Now you can split the motion application between the iPOS drives and the EtherCAT or CANopen master. Using TML (Technosoft's motion programming language), you can build complex motion applications locally, on each drive, leaving only the high level of motion application on the EtherCAT or CANopen master, and thus reducing the network master’s complexity. The master supervises the entire motion application, while the specific tasks are executed by the iPOS drives.
      • iPOS2401 MX-CAN 7-30V 0.9A 24W CANopen/TMLCAN

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 7 – 30 VDC / 7 – 40 VDC
        • Output current: 0.9 A continuous / peak
        • Communication via RS232, TMLCAN and CANopen interfaces
        • Modular plug-in modules with very high integration density
        • For soldering / plugging in with pin headers with a pitch of 2 mm
        • Size (L x W x H): 46.5 x 19.2 x 8.5 mm

        Product features
        • Standard 2-mm pitch header mating connectors
        • Sinusoidal (FOC) or trapezoidal (Hall-based) control of brushless motors
        • Open-loop or closed-loop control of 2-phase and 3-phase steppers
        • Various modes of operation: torque, speed or position control; position or speed profiles; reference: external analog, or sent via a communication bus
        • TML instruction set for the definition and execution of motion sequences
        • Standalone operation with stored motion sequences
        • Communication:
        • RS-232 serial
        • CAN-Bus 2.0B up to 1 Mbit/s, or CANopen
        • Digital and analog I/Os:
        • 5 digital inputs: 5-24 V, NPN (Enable, 2 limit switches and 2 general-purpose inputs)
        • 2 digital outputs: 5-24 V, 0.5 A, NPN open-collector (general-purpose)
        • 1 analog input: 12-bit, 0-5 V: Reference or general-purpose
        • Feedback devices supported:
        • Incremental quad encoder (single-ended, open collector and differential)
        • Easy configuration and programming with EasyMotion Studio software platform
        • Protection to over-current, short-circuit, earth fault, over- / under-voltage, I2t, control error
      • iPOS2401 MX-CAT 7-30V 0.9A 24W EtherCAT

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 7 – 30 VDC / 7 – 40 VDC
        • Output current: 0.9 A continuous / peak
        • Communication via RS232 or EtherCAT
        • Modular plug-in modules with very high integration density
        • For soldering / plugging in with pin headers with a pitch of 2 mm
        • Size (L x W x H): 46.5 x 19.2 x 8.5 mm

        Product features
        • CANopen similar drive
        • Standard 2-mm pitch header mating connectors
        • Sinusoidal (FOC) or trapezoidal (Hall-based) control of brushless motors
        • Open-loop or closed-loop control of 2-phase and 3-phase steppers
        • Various modes of operation: torque, speed or position control; position or speed profiles; reference: external analog, or sent via a communication bus
        • TML instruction set for the definition and execution of motion sequences
        • Standalone operation with stored motion sequences
        • Communication:
        • RS-232 serial
        • EtherCAT communication cycles down to 900 µs; CAN application protocol over EtherCAT (CoE)
        • Digital and analog I/Os:
        • 5 digital inputs: 5-24 V, NPN (Enable, 2 limit switches and 2 general-purpose inputs)
        • 2 digital outputs: 5-24 V, 0.5 A, NPN open-collector (general-purpose)
        • 1 analog input: 12-bit, 0-5 V: Reference or general-purpose
        • Feedback devices supported:
        • Incremental quad encoder (single-ended, open collector and differential)
        • Digital Hall sensors
        • Easy configuration and programming with EasyMotion Studio software platform
        • Protection to over-temperature, over-current, short-circuit, earth fault, over- / under-voltage, I2t, control error
      • iPOS3602 VX-CAN 9-36V 2A 75W CANopen/EtherCAT

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 9 – 36 VDC
        • Output current: 2 A continuous; 3.2 A peak current
        • Communication via RS232, CAN/CANopen (standard) or EtherCAT (optional)
        • PCIe plug-in module with very high integration density
        • Flexible integration on single or multi-axis motherboards
        • Size (L x W x H): 46.5 x 19.2 x 8.5 mm

        Product features
        • Standard PCIe 4x mating connectors
        • Sinusoidal (FOC) or trapezoidal (Hall-based) control of brushless motors
        • Open-loop or closed-loop control of 2-phase and 3-phase steppers
        • Various modes of operation: torque, speed or position control; position or speed profiles; reference: external analog, or sent via a communication bus
        • TML instruction set for the definition and execution of motion sequences
        • Standalone operation with stored motion sequences
        • RS-232 serial communication
        • CAN-Bus 2.0B up to 1 Mbit/s, or CANopen
        • EtherCAT communication via additional extension module (optional)
        • Digital and analog I/Os:
        • 5 digital inputs: 5-36 V, NPN (Enable, 2 limit switches and 2 general-purpose ones)
        • 4 digital outputs: 5-36 V, 0.5 A, NPN open-collector (Ready, Error, 2 general-purpose outputs)
        • 2 analog inputs: 12-bit, 0-5 V: Reference, Feedback or general-purpose
        • Feedback devices supported:
        • Incremental quad encoder (single-ended, open collector and differential)
        • Analog sine/cosine incremental encoder (differential 1 Vpp)
        • Digital and linear Hall sensors
        • Easy configuration and programming with EasyMotion Studio software platform
        • Protection to over-current, short-circuit, earth fault, over- / under-voltage, I2t, control error
      • iPOS3602 MX-CAN 9-36V 2A 75W CANopen/EtherCAT

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 9 – 36 VDC
        • Output current: 2 A continuous; 3.2 A peak current
        • Communication via RS232, CAN/CANopen (standard) or EtherCAT (optional)
        • For soldering / plugging in with pin headers with a pitch of 2.54 mm
        • Size (L x W x H): 55 x 26.4 x 13.1 mm

        Product features
        • Standard mating connectors
        • Sinusoidal (FOC) or trapezoidal (Hall-based) control of brushless motors
        • Open-loop or closed-loop control of 2-phase and 3-phase steppers
        • Various modes of operation: torque, speed or position control; position or speed profiles; reference: external analog, or sent via a communication bus
        • TML instruction set for the definition and execution of motion sequences
        • Standalone operation with stored motion sequences
        • Communication:
        • RS-232 serial
        • CAN-Bus 2.0B up to 1 Mbit/s, or CANopen
        • EtherCAT via additional extension module (optional)
        • Digital and analog I/Os:
        • 5 digital inputs: 5-36 V, NPN (Enable, 2 limit switches and 2 general-purpose ones)
        • 4 digital outputs: 5-36 V, 0.5 A, NPN open-collector (Ready, Error, 2 general-purpose outputs)
        • 1 analog input: 12-bit, 0-5 V: Reference or general-purpose
        • Feedback devices supported:
        • Incremental quad encoder (single-ended, open collector and differential)
        • Analog sine/cosine incremental encoder (differential 1 Vpp)
        • Digital and linear Hall sensors
        • Easy configuration and programming with EasyMotion Studio software platform
        • Protection to over-current, short-circuit, earth fault, over- / under-voltage, I2t, control error
      • iPOS3602 BX-CAN 9-36V 2A 75W CANopen/TMLCAN

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 9 – 36 VDC
        • Output current: 2 A continuous; 3.2 A peak current
        • Communication via RS232, TMLCAN and CANopen interfaces
        • Closed-frame design, with retractable connectors
        • Size (L x W x H): 80 x 55 x 16.3 mm

        Product features
        • CAN-Bus 2.0B up to 1 Mbit/s, or CANopen
        • Digital and analog I/Os:
        • 5 digital inputs: 5-36 V, NPN or PNP (Enable, 2 limit switches and 2 general-purpose ones)
        • 3 digital outputs: 5-36 V, 0.5 A, NPN open-collector (Ready, Error, 2 general-purpose outputs)
        • 1 analog input: 12-bit, 0-5 V: Reference, Feedback or general-purpose
        • Feedback devices supported:
        • Incremental quad encoder (single-ended, open collector and differential)
        • Analog sine/cosine incremental encoder (differential 1 Vpp)
        • Digital and linear Hall sensors
        • Easy configuration and programming with EasyMotion Studio software platform
        • Protection to over-current, short-circuit, earth fault, over- / under-voltage, I2t, control error
      • iPOS3602 HX-CAN 9-36V 2A 75W CANopen/TMLCAN

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 9 – 36 VDC
        • Output current: 2 A continuous; 3.2 A peak current
        • Communication via RS232, TMLCAN and CANopen interfaces
        • Closed-frame design with vertical retractable connectors
        • Size (L x W x H): 73 x 45 x 16 mm

        Product features
        • RS-232, up to 115200 baud rate
        • CAN-Bus, up to 1 Mbit, TMLCAN or CANopen (CiA 301, 305 & 402) protocols
        • Digital and analog I/Os:
        • 5 digital inputs: 5-36 V, NPN/PNP programmable
        • 4 digital outputs: 5-36 V, 0.5 A, NPN open-collector
        • 1 analog input: 12-bit, 0-5 V
        • Feedback devices:
        • Incremental quad encoder, RS-422 differential
        • Sine/cosine incremental encoder, 1 Vpp differential
        • Digital Hall sensors
        • Protection to over-current, short-circuit, earth fault, over- / under-voltage, I2t, control error
      • iPOS3604 BX-CAN 9-36V 4A 144W CANopen/TMLCAN

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 9 – 36 VDC
        • Output current: 4 A continuous; 10 A peak current
        • Communication via RS232, TMLCAN and CANopen interfaces
        • Closed-frame design, with retractable connectors
        • Size (L x W x H): 80 x 55 x 16.3 mm

        Product features
        • Sinusoidal (FOC) or trapezoidal (Hall-based) control of brushless motors
        • Open-loop or closed-loop control of 2-phase and 3-phase steppers
        • Various modes of operation: torque, speed or position control; position or speed profiles; reference: external analog, or sent via a communication bus
        • TML instruction set for the definition and execution of motion sequences
        • Standalone operation with stored motion sequences
        • RS-232 serial communication
        • CAN-Bus 2.0B up to 1 Mbit/s, or CANopen
        • Digital and analog I/Os:
        • 5 digital inputs, 5-36 V, PNP or NPN: Enable, 2 for limit switches, 2 general-purpose
        • 3 digital outputs, 5-36 V, 0.5 A,1.7 A peak, PNP: Ready, Error, general-purpose
        • 1 analog input: 12-bit, 0-5 V: Reference, Feedback or general purpose
        • Feedback devices supported:
        • Incremental quad encoder (single-ended, open collector and differential)
        • Analog sine/cosine incremental encoder (differential 1 Vpp)
        • Digital and linear Hall sensors
        • Easy configuration and programming with EasyMotion Studio software platform
        • Protection to over-current, short-circuit, earth fault, over- / under-voltage, I2t, control error
      • iPOS3604 HX-CAN 9-36V 4A 144W CANopen/TMLCAN

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 9 – 36 VDC
        • Output current: 4 A continuous; 10 A peak current
        • Communication via RS232, TMLCAN and CANopen interfaces
        • Closed-frame design with vertical retractable connectors
        • Size (L x W x H): 73 x 45 x 16 mm


        Product features

        A cost-effective universal solution for controlling DC motors, PMSM / BLDC motors, and stepper motors with a power of up to 144 W and a voltage of up to 36 V. Although very compact, an iPOS3604 HX contains all the necessary elements for an application: controller, output stage and PLC functionality in one unit.

        Electrical characteristics:

        • Supply voltage for logic / power: 9 - 36 VDC
        • Output current: 4 A continuous, 10 A peak current

        Motor types:

        • Brushless DC motors (BLDC, PMSM motors)
        • Brushed DC motors (DC motors)
        • Stepper motors (2- or 3-phase)
        • Voice coil actuators
        • Linear motors

        Feedback options:

        • Incremental encoder
        • SinCos 1Vpp
        • Digital Hall-sensors
        • Analog Hall-sensors

        Control:

        • Via CAN Bus, pulse and direction or analog/digital inputs
        • Autonomous execution of complex motion sequences stored in the nonvolatile memory of the drive.
      • iPOS3604 VX-CAN 9-36V 4A 144W CANopen/EtherCAT

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 9 – 36 VDC
        • Output current: 4 A continuous; 10 A peak current
        • Communication via RS232, CAN/CANopen (standard) or EtherCAT (optional)
        • PCIe plug-in module with very high integration density
        • Flexible integration on single or multi-axis motherboards
        • Size (L x W x H): 46.5 x 19.2 x 8.5 mm

        Product features
        • Standard PCIe 4x mating connectors
        • Sinusoidal (FOC) or trapezoidal (Hall-based) control of brushless motors
        • Open-loop or closed-loop control of 2-phase and 3-phase steppers
        • Various modes of operation: torque, speed or position control; position or speed profiles; reference: external analog, or sent via a communication bus
        • TML instruction set for the definition and execution of motion sequences
        • Standalone operation with stored motion sequences
        • RS-232 serial communication
        • CAN-Bus 2.0B up to 1 Mbit/s, or CANopen
        • EtherCAT communication via additional extension module (optional)
        • Digital and analog I/Os:
        • 5 digital inputs: 5-36 V, NPN (Enable, 2 limit switches and 2 general-purpose ones)
        • 4 digital outputs: 5-36 V, 0.5 A, NPN open-collector (Ready, Error, 2 general-purpose outputs)
        • 2 analog inputs: 12-bit, 0-5 V: Reference, Feedback or general-purpose
        • Feedback devices supported:
        • Incremental quad encoder (single-ended, open collector and differential)
        • Analog sine/cosine incremental encoder (differential 1 Vpp)
        • Digital and linear Hall sensors
        • Easy configuration and programming with EasyMotion Studio software platform
        • Protection to over-current, short-circuit, earth fault, over- / under-voltage, I2t, control error
      • iPOS3604 MX-CAN 9-36V 4A 144W CANopen/EtherCAT

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 9 – 36 VDC
        • Output current: 4 A continuous; 10 A peak current
        • Communication via RS232, CAN/CANopen (standard) or EtherCAT (optional)
        • For soldering / plugging in with pin headers with a pitch of 2.54 mm
        • Size (L x W x H): 55 x 26.4 x 13.1 mm

        Product features
        • EtherCAT via additional extension module (optional)
        • Digital and analog I/Os:
        • 5 digital inputs, 5-36V, NPN: Enable, 2 for limit switches, 2 general-purpose
        • 4 digital outputs, 5-36V, 0.5A, NPN O.C.: Ready, Error, 2 general-purpose
        • 1 analog input: 12-bit, 0-5V: Reference or general purpose
        • Feedback devices supported:
        • Incremental quad encoder (single-ended, open collector and differential)
        • Analog sine/cosine incremental encoder (differential 1 Vpp)
        • Digital and linear Hall sensors
        • Easy configuration and programming with EasyMotion Studio software platform
        • Protection to over-current, short-circuit, earth fault, over- / under-voltage, I2t, control error
      • iPOS4803P Microdrive EtherCAT

        • Intelligent, compact and freely programmable motor controller
        • Brushless rotary and linear motors, voice coils and DC brushed motors
        • Motor supply / logic supply: 7 – 48 VDC / 6 – 48 VDC
        • Output current: 3 A continuous; 15 A peak current
        • Communication via RS232, USB or EtherCAT
        • Size (L x W x H): 38.1 x 25 x 9.5 mm


        Product features

        The iPOS4803 is a family of fully digital intelligent servo drives, based on the latest DSP technology and they offer unprecedented drive performance combined with an embedded motion controller. Suitable for control of brushless DC, brushless AC (vector control) and DC brushed motors the iPOS4803 drives accept as position feedback incremental encoders, linear Hall sensors as well as absolute encoders such as SSI, BiSS-C, EnDAT, Tamagawa, Panasonic, Nikon and Sanyo Denki.

        Electrical characteristics:

        • Power supply:
                     Motor supply: 7 – 48 VDC
                     Logic supply: 6 – 48 VDC
        • Output current:
                     3 A continuous at 48V motor supply voltage
                     14 A peak current

        Motor types:

        • Brushless DC motors (BLDC, PMSM motors)
        • Brushed DC motors (DC motors)
        • Voice coil actuators
        • Linear and Torque motors
        • 3-Phase Stepper Motors
      • iPOS4803S Microdrive EtherCAT

        • Intelligent, compact and freely programmable motor controller
        • Brushless rotary and linear motors, voice coils and DC brushed motors
        • Motor supply / logic supply: 7 – 48 VDC / 6 – 48 VDC
        • Output current: 3 A RMS continuous; 14 A peak current
        • Communication via RS232, USB or EtherCAT
        • Size (L x W x H): 40.6 x 38.6 x 32.7 mm


        Product features

        The iPOS4803 is a family of fully digital intelligent servo drives, based on the latest DSP technology and they offer unprecedented drive performance combined with an embedded motion controller. Suitable for control of brushless DC, brushless AC (vector control) and DC brushed motors the iPOS4803 drives accept as position feedback incremental encoders, linear Hall sensors as well as absolute encoders such as SSI, BiSS-C, EnDAT, Tamagawa, Panasonic, Nikon and Sanyo Denki.

        Electrical characteristics:

        • Power supply:
                     Motor supply: 7 – 48 VDC
                     Logic supply: 6 – 48 VDC
        • Output current:
                     3 A continuous at 48V motor supply voltage
                     14 A peak current

        Motor types:

        • Brushless DC motors (BLDC, PMSM motors)
        • Brushed DC motors (DC motors)
        • Voice coil actuators
        • Linear and Torque motors
        • 3-Phase Stepper Motors
      • iPOS3604 HX-CAN 9-36V 4A 144W CANopen/TMLCAN

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 9 – 36 VDC
        • Output current: 4 A continuous; 10 A peak current
        • Communication via RS232, TMLCAN and CANopen interfaces
        • Closed-frame design with vertical retractable connectors
        • Size (L x W x H): 73 x 45 x 16 mm

        Product features
        • Sinusoidal (FOC) or trapezoidal (Hall-based) control of brushless motors
        • Open-loop or closed-loop control of 2-phase and 3-phase steppers
        • Position, speed and torque control
        • Motion modes: position and speed profiles; PVT & PT interpolated, electronic gearing and cam, external reference: analogue or sent via a communication bus
        • Motion programming via TML or via motion libraries
        • Standalone operation of complete motion programs stored in the drive's memory
        • Communication:
        • RS-232, up to 115200 baud rate
        • CAN-Bus, up to 1 Mbit, TMLCAN or CANopen (CiA 301, 305 & 402) protocols
        • Digital and analog I/Os:
        • 5 digital inputs: 5-36 V, NPN/PNP programmable
        • 4 digital outputs: 5-36 V, 0.5 A, NPN open-collector
        • 1 analog input: 12-bit, 0-5 V
        • Feedback devices:
        • Incremental quad encoder, RS-422 differential
        • Sine/cosine incremental encoder, 1 Vpp differential
        • Digital Hall sensors
        • Protection to over-current, short-circuit, earth fault, over- / under-voltage, I2t, control error
      • iPOS4808 VX-CAN 11-50V 8A 400W CANopen/EtherCAT

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 11 – 50 VDC / 12 – 36 VDC
        • Output current: 8 A continuous; 20 A peak current
        • Communication via RS232, CAN/CANopen (standard) or EtherCAT (optional)
        • Open-frame PCB with vertical plug-in design
        • Size (L x W x H): 56 x 44 x 6.9 mm

        Product features
        • Standard PCIe 8x mating connectors
        • Sinusoidal (FOC) or trapezoidal (Hall-based) control of brushless motors
        • Open-loop or closed-loop control of 2-phase and 3-phase steppers
        • Various modes of operation: torque, speed or position control; position or speed profiles; reference: external analog, or sent via a communication bus
        • TML instruction set for the definition and execution of motion sequences
        • Standalone operation with stored motion sequences
        • RS-232 serial communication
        • CAN-Bus 2.0B up to 1 Mbit/s, or CANopen
        • EtherCAT communication via additional extension module (optional)
        • Digital and analog I/Os:
        • 8 digital inputs: 5-36 V, NPN (Enable, 2 limit switches and 5 general-purpose ones)
        • 5 digital outputs: 5-36 V, 0.5 A, NPN open-collector (Ready, Error, 3 general-purpose ones)
        • 2 analog inputs: 12-bit, 0-5 V: Reference, Feedback or general-purpose
        • Feedback devices supported:
        • Incremental quad encoder (single-ended, open collector and differential)
        • Analog sine/cosine incremental encoder (differential 1 Vpp)
        • Digital and linear Hall sensors
        • Easy configuration and programming with EasyMotion Studio software platform
        • Protection to over-current, short-circuit, over- / under-voltage, I2t, control error
      • iPOS4808 MY-CAN 11-50V 8A 400W CANopen/TMLCAN

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 11 – 50 VDC / 12 – 36 VDC
        • Output current: 8 A continuous; 20 A peak current
        • Communication via RS232, TMLCAN and CANopen interfaces
        • For soldering / plugging in with pin headers with a grid dimension of 2.54 mm
        • Size (L x W x H): 60 x 43.6 x 12.4 mm

        Product features
        • Standard header 2.54 mm pitch connectors
        • Sinusoidal (FOC) or trapezoidal (Hall-based) control of brushless motors
        • Open-loop or closed-loop control of 2-phase and 3-phase steppers
        • Various modes of operation: torque, speed or position control; position or speed profiles; reference: external analog, or sent via communication bus
        • TML instruction set for the definition and execution of motion sequences
        • Connection to PC and PLC through different motion libraries (Linux, Delphi, Visual Basic, C ++, LabView, Siemens, B & R, Omron)
        • Standalone operation with stored motion sequences
        • RS-232 serial communication
        • CAN-Bus 2.0B up to 1 Mbit/s, or CANopen
        • EtherCAT communication available (on the -CAT- drive versions, see "Ordering Information")
        • Digital and analog I/Os:
        • 6 digital inputs: 5-36 V (2 limit switches and 4 general-purpose ones)
        • 5 digital outputs: 5-36 V, 0.5 A (Ready, Error, 3 general-purpose ones)
        • 2 analog inputs: 12-bit, 0-5 V: Reference, Feedback or general-purpose
        • Safety:
        • Drive enable circuit
        • With iPOS4808-CAN-STO and iPOS4808-CAT-STO versions: 2 safe torque-off inputs, safety integrity level (SIL3/Cat3/PLe) according to EN61800-5-1;-2/ EN61508-3;-4/ EN ISO 13849-1.
        • Feedback devices (dual-loop supported):
        • 1st Feedback:
        • Incremental quad encoder (single-ended, open collector and differential)
        • Analog sine/cosine incremental encoder (differential: 1 Vpp)
        • Digital and linear Hall sensors
        • 2nd Feedback:
        • Incremental quad encoder (differential)
        • Pulse & direction interface (differential)
        • BiSS / SSI encoder interface
        • 127 h/w selectable addresses through pin configuration
        • Easy configuration and programming with EasyMotion Studio software platform
        • Protection to over-current, short-circuit, over- / under-voltage, I2t, control error
      • iPOS4808 MY-STO 11-50V 8A 400W CANopen/TMLCAN

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 11 – 50 VDC / 12 – 36 VDC
        • Output current: 8 A continuous; 20 A peak current
        • Communication via RS232, TMLCAN and CANopen interfaces
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • For soldering / plugging in with pin headers with a grid dimension of 2.54 mm
        • Size (L x W x H): 60 x 43.6 x 22 mm

        Product features
        • Standard header 2.54 mm pitch connectors
        • Sinusoidal (FOC) or trapezoidal (Hall-based) control of brushless motors
        • Open-loop or closed-loop control of 2-phase and 3-phase steppers
        • Various modes of operation: torque, speed or position control; position or speed profiles; reference: external analog, or sent via communication bus
        • TML instruction set for the definition and execution of motion sequences
        • Connection to PC and PLC through different motion libraries (Linux, Delphi, Visual Basic, C ++, LabView, Siemens, B & R, Omron)
        • Standalone operation with stored motion sequences
        • RS-232 serial communication
        • CAN-Bus 2.0B up to 1 Mbit/s, or CANopen
        • EtherCAT communication available (on the -CAT- drive versions, see "Ordering Information")
        • Digital and analog I/Os:
        • 6 digital inputs: 5-36 V (2 limit switches and 4 general-purpose ones)
        • 5 digital outputs: 5-36 V, 0.5 A (Ready, Error, 3 general-purpose ones)
        • 2 analog inputs: 12-bit, 0-5 V: Reference, Feedback or general-purpose
        • Safety:
        • Drive enable circuit
        • With iPOS4808-CAN-STO and iPOS4808-CAT-STO versions: 2 safe torque-off inputs,
        • safety integrity level (SIL3/Cat3/PLe) according to
        • EN61800-5-1;-2/ EN61508-3;-4/ EN ISO 13849-1.
        • Feedback devices (dual-loop supported):
        • 1st Feedback:
        • Incremental quad encoder (single-ended, open collector and differential)
        • Analog sine/cosine incremental encoder (differential: 1 Vpp)
        • Digital and linear Hall sensors
        • 2nd Feedback:
        • Incremental quad encoder (differential)
        • Pulse & direction interface (differential)
        • BiSS / SSI encoder interface
        • 127 h/w selectable addresses through pin configuration
        • Easy configuration and programming with EasyMotion Studio software platform
        • Protection to over-current, short-circuit, over- / under-voltage, I2t, control error
      • iPOS4808 BX-CAN 11-50V 8A 400W CANopen/TMLCAN

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 11 – 50 VDC / 12 – 36 VDC
        • Output current: 8 A continuous; 20 A peak current
        • Communication via RS232, TMLCAN and CANopen interfaces
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Closed-frame design with retractable connectors
        • Size (L x W x H): 88.5 x 77 x 16.4 mm

        Product features
        • Sinusoidal (FOC) or trapezoidal (Hall-based) control of brushless motors
        • Open-loop or closed-loop control of 2-phase and 3-phase steppers
        • Various modes of operation: torque, speed or position control; position or speed profiles; cyclic synchronous position mode;
        • reference: external analog, or sent via a communication bus
        • TML instruction set for the definition and execution of motion sequences
        • Standalone operation with stored motion sequences
        • RS-232 serial communication
        • CAN-Bus 2.0B up to 1 Mbit/s, or CANopen (CiA 301v4.2 and 402v3.0) protocols
        • Separate Enable circuit (motor not powered when circuit is inactive)
        • Digital and analog I/Os:
        • 6 digital inputs: 5-36 V, NPN or PNP (Enable, 2 limit switches and 3 general-purpose ones)
        • 5 digital outputs: 5-36 V, 0.5 A, NPN open-collector (Ready, Error, 3 general-purpose ones)
        • 2 analog inputs: 12-bit, 0-5 V: Reference, Feedback or general-purpose
        • Feedback devices (dual-loop support):
        • 1st Feedback:
        • Incremental quad encoder (single-ended, open collector and differential)
        • Analog sine/cosine incremental encoder (differential 1 Vpp)
        • Digital and linear Hall sensors
        • 2nd Feedback (dual loop)/digital reference:
        • Incremental quad encoder or pulse & direction (differential)
        • SSI / BiSS* encoder interface
        • Easy configuration and programming with EasyMotion Studio software platform
        • Protection to over-current, short-circuit, over- / under-voltage, I2t, control error
      • iPOS4808 BX-CAT 11-50V 8A 400W EtherCAT

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 11 – 50 VDC / 12 – 36 VDC
        • Output current: 8 A continuous; 20 A peak current
        • Communication via RS232 or EtherCAT
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Closed-frame design with retractable connectors
        • Size (L x W x H): 88.5 x 77 x 16.4 mm

        Product features
        • Sinusoidal (FOC) or trapezoidal (Hall-based) control of brushless motors
        • Open-loop or closed-loop control of 2-phase and 3-phase steppers
        • Various modes of operation: torque, speed or position control; position or speed profiles; cyclic synchronous position mode;
        • reference: external analog, or sent via a communication bus
        • TML instruction set for the definition and execution of motion sequences
        • Standalone operation with stored motion sequences
        • RS-232 serial communication
        • EtherCAT: communication cycles down to 400 µs; CAN application protocol over EtherCAT (CoE)
        • Separate Enable circuit (motor not powered when circuit is inactive)
        • Digital and analog I/Os:
        • 6 digital inputs: 5-36 V, NPN or PNP (Enable, 2 limit switches and 3 general-purpose ones)
        • 5 digital outputs: 5-36 V, 0.5 A, NPN open-collector (Ready, Error, 3 general-purpose ones)
        • 2 analog inputs: 12-bit, 0-5 V: Reference, Feedback or general-purpose
        • Feedback devices (dual-loop support):
        • 1st Feedback:
        • Incremental quad encoder (single-ended, open collector and differential)
        • Analog sine/cosine incremental encoder (differential 1 Vpp)
        • Digital and linear Hall sensors
        • 2nd Feedback (dual loop)/digital reference:
        • Incremental quad encoder or pulse & direction (differential)
        • SSI / BiSS* encoder interface
        • Easy configuration and programming with EasyMotion Studio software platform
        • Protection to over-current, short-circuit, over- / under-voltage, I2t, control error
      • iPOS4810 MZ-CAN 11-50V 10A RMS 700W CAN/TMLCAN

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 10 A RMS continuous; 28 A RMS peak current
        • Communication via RS232, TMLCAN and CANopen interfaces
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Size (L x W x H): 64 x 43.6 x 13.7 mm


        Product features

        The iPOS481x is a family of fully digital intelligent servo drives, based on the latest DSP technology and they offer unprecedented drive performance combined with an embedded motion controller. All drives perform position, speed or torque control and work in single, multi-axis or stand-alone configurations. Thanks to the embedded motion controller, the iPOS481x drives combine controller, drive and PLC functionality in a single compact unit and are capable to execute complex motions without requiring intervention of an external motion controller.

        Electrical characteristics:

        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 10 A RMS continuous, 28 A RMS peak current

        Motor types:

        • Brushless DC motors (BLDC, PMSM motors)
        • Brushed DC motors (DC motors)
        • Stepper motors (2- or 3-phase)
        • Voice coil actuators
        • Linear motors
      • iPOS4810 MZ-CAT 11-50V 10A RMS 700W EtherCAT

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 10 A RMS continuous; 28 A RMS peak current
        • Communication via RS232 or EtherCAT
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Size (L x W x H): 64 x 43.6 x 13.7 mm


        Product features

        Programmable and flexible drive controller with integrated output stage, MotionChip ™ controller, I / O signals, EtherCAT interface, STO safety function and comprehensive support for motor technologies and encoder interfaces. The MZ module was specially developed for integration on a carrier board and offers an ideal solution for various applications with critical room conditions.

        Electrical characteristics:

        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 10 A RMS continuous; 28 A RMS peak current

        Motor types:

        • Brushless DC motors (BLDC, PMSM motors)
        • Brushed DC motors (DC motors)
        • Stepper motors (2- or 3-phase)
        • Voice coil actuators
        • Linear motors
      • iPOS4810 XZ-CAN 11-50V 10A RMS 700W CAN/TMLCAN

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 10 A RMS continuous; 28 A RMS peak current
        • Communication via RS232, TMLCAN and CANopen interfaces
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Size (L x W x H): 64 x 43.6 x 13.7 mm


        Product features

        The iPOS481x is a family of fully digital intelligent servo drives, based on the latest DSP technology and they offer unprecedented drive performance combined with an embedded motion controller. All drives perform position, speed or torque control and work in single, multi-axis or stand-alone configurations. Thanks to the embedded motion controller, the iPOS481x drives combine controller, drive and PLC functionality in a single compact unit and are capable to execute complex motions without requiring intervention of an external motion controller.

        Electrical characteristics:

        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 10 A RMS continuous, 28 A RMS peak current

        Motor types:

        • Brushless DC motors (BLDC, PMSM motors)
        • Brushed DC motors (DC motors)
        • Stepper motors (2- or 3-phase)
        • Voice coil actuators
        • Linear motors
      • iPOS4810 XZ-CAT 11-50V 10A RMS 700W EtherCAT

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 10 A RMS continuous; 28 A RMS peak current
        • Communication via RS232 or EtherCAT
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Size (L x W x H): 93 x 43.8 x 32 mm


        Product features

        The iPOS481x is a family of fully digital intelligent servo drives, based on the latest DSP technology and they offer unprecedented drive performance combined with an embedded motion controller. All drives perform position, speed or torque control and work in single, multi-axis or stand-alone configurations. Thanks to the embedded motion controller, the iPOS481x drives combine controller, drive and PLC functionality in a single compact unit and are capable to execute complex motions without requiring intervention of an external motion controller.

        Electrical characteristics:

        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 10 A RMS continuous, 28 A RMS peak current

        Motor types:

        • Brushless DC motors (BLDC, PMSM motors)
        • Brushed DC motors (DC motors)
        • Stepper motors (2- or 3-phase)
        • Voice coil actuators
        • Linear motors
      • iPOS4815 MZ-CAN 11-50V 15A RMS 1kW CAN/TMLCAN

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 15 A RMS continuous; 28 A RMS peak current
        • Communication via RS232, TMLCAN and CANopen interfaces
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Size (L x W x H): 64 x 43.6 x 13.7 mm


        Product features

        The iPOS481x is a family of fully digital intelligent servo drives, based on the latest DSP technology and they offer unprecedented drive performance combined with an embedded motion controller. All drives perform position, speed or torque control and work in single, multi-axis or stand-alone configurations. Thanks to the embedded motion controller, the iPOS481x drives combine controller, drive and PLC functionality in a single compact unit and are capable to execute complex motions without requiring intervention of an external motion controller.

        Electrical characteristics:

        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 10 A RMS continuous, 28 A RMS peak current

        Motor types:

        • Brushless DC motors (BLDC, PMSM motors)
        • Brushed DC motors (DC motors)
        • Stepper motors (2- or 3-phase)
        • Voice coil actuators
        • Linear motors
      • iPOS4815 MZ-CAT 11-50V 15A RMS 1kW EtherCAT

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 15 A RMS continuous; 28 A RMS peak current
        • Communication via RS232 or EtherCAT
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Size (L x W x H): 64 x 43.6 x 13.7 mm

         

        Product features

        Programmable and flexible drive controller with integrated output stage, MotionChip ™ controller, I / O signals, EtherCAT interface, STO safety function and comprehensive support for motor technologies and encoder interfaces. The MZ module was specially developed for integration on a carrier board and offers an ideal solution for various applications with critical room conditions.

        Electrical characteristics:

        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 15 A RMS continuous; 28 A RMS peak current

        Motor types:

        • Brushless DC motors (BLDC, PMSM motors)
        • Brushed DC motors (DC motors)
        • Stepper motors (2- or 3-phase)
        • Voice coil actuators
        • Linear motors
      • iPOS4815 XZ-CAN 11-50V 15A RMS 1kW CAN/TMLCAN

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 15 A RMS continuous; 28 A RMS peak current
        • Communication via RS232, TMLCAN and CANopen interfaces
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Size (L x W x H): 64 x 43.6 x 13.7 mm


        Product features

        The iPOS481x is a family of fully digital intelligent servo drives, based on the latest DSP technology and they offer unprecedented drive performance combined with an embedded motion controller. All drives perform position, speed or torque control and work in single, multi-axis or stand-alone configurations. Thanks to the embedded motion controller, the iPOS481x drives combine controller, drive and PLC functionality in a single compact unit and are capable to execute complex motions without requiring intervention of an external motion controller.

        Electrical characteristics:

        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 15 A RMS continuous, 28 A RMS peak current

        Motor types:

        • Brushless DC motors (BLDC, PMSM motors)
        • Brushed DC motors (DC motors)
        • Stepper motors (2- or 3-phase)
        • Voice coil actuators
        • Linear motors
      • iPOS4815 XZ-CAT 11-50V 15A RMS 1kW EtherCAT

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 15 A RMS continuous; 28 A RMS peak current
        • Communication via RS232 or EtherCAT
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Size (L x W x H): 93 x 43.8 x 32 mm


        Product features

        The iPOS481x is a family of fully digital intelligent servo drives, based on the latest DSP technology and they offer unprecedented drive performance combined with an embedded motion controller. All drives perform position, speed or torque control and work in single, multi-axis or stand-alone configurations. Thanks to the embedded motion controller, the iPOS481x drives combine controller, drive and PLC functionality in a single compact unit and are capable to execute complex motions without requiring intervention of an external motion controller.

        Electrical characteristics:

        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 15 A RMS continuous, 28 A RMS peak current

        Motor types:

        • Brushless DC motors (BLDC, PMSM motors)
        • Brushed DC motors (DC motors)
        • Stepper motors (2- or 3-phase)
        • Voice coil actuators
        • Linear motors
      • iPOS4850 BX-CAN 11-60V 50A 2.5kW CANopen/TMLCAN

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 11 – 60 VDC / 9 – 36 VDC
        • Output current: 50 A continuous; 90 A peak current
        • Supports various feedback options including Sin / Cos and absolute encoders
        • Communication via RS232, TMLCAN and CANopen interfaces
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Closed-frame design, with retractable connectors
        • Size (L x W x H): 139 x 93.9 x 24.6 mm

        Product features
        • Sinusoidal (FOC) or trapezoidal (Hall-based) control of brushless motors
        • Open-loop or closed-loop control of 3-phase steppers
        • Position, speed and torque control
        • Motion modes: position and speed profiles; PVT & PT interpolated, electronic gearing and cam, external reference: analogue or sent via a communication bus
        • Motion programming via TML (Technosoft Motion Language) or via motion libraries for Windows (VC / VB / Labview), Linux and various PLC
        • Standalone operation of complete motion programs stored in the drive memory
        • Communication:
        • RS-232, up to 115200 baud rate
        • CAN bus, up to 1 Mbit, with TMLCAN or CANopen (CiA 301, 305 & 402) protocols
        • Digital and analog I/Os:
        • 2 digital inputs: 7-36 V, PNP
        • 2 digital outputs: 5-36 V, 0.5 A, NPN open-collector
        • 3 analog inputs: 12-bit, 0-5 V
        • Solenoid driver for motor brake, 2A, commanded by OUT0
        • Safety:
        • 2 safe torque-off inputs, safety integrity level (SIL3/Cat3/PLe)
        • according to EN61800-5-1;-2/ EN61508-3;-4/ EN ISO 13849-1
        • Feedback devices (dual-loop supported):
        • 1st Feedback:
        • Incremental quad encoder, RS-422 differential
        • 2nd Feedback:
        • Incremental quad encoder, RS-422 differential
        • SSI, BiSS
        • Pulse & direction interface, RS-422 differential
        • 32 h/w selectable addresses through pin configuration
        • Easy configuration and programming with the EasyMotion Studio software platform
        • Protections: over-current, short-circuit, over-temperature, earth fault, over- / under-voltage, I2t, control error
      • iPOS8010 BX-CAN 11-80V 10A 800W CANopen/TMLCAN

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 11 – 80 VDC / 9 – 36 VDC
        • Output current: 10 A continuous; 20 A peak current
        • Supports various feedback options including Sin / Cos and absolute encoders
        • Communication via RS232, TMLCAN and CANopen interfaces
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Closed-frame design, with retractable connectors
        • Size (L x W x H): 139 x 94.2 x 24.5 mm

        Product features
        • Sinusoidal (FOC) or trapezoidal (Hall-based) control of brushless motors
        • Open-loop or closed-loop control of 2-phase and 3-phase steppers
        • Position, speed and torque control
        • Motion modes: position and speed profiles; PVT & PT interpolated, electronic gearing and cam, external reference: analog or sent via a communication bus
        • Motion programming via TML (Technosoft Motion Language) or via motion libraries for Windows (VC / VB / Labview), Linux and various PLC
        • Standalone operation of complete motion programs stored in the drive memory
        • Communication:
        • RS-232, up to 115200 baud rate
        • CAN bus, up to 1 Mbit, with TMLCAN or CANopen (CiA 301, 305 & 402) protocols
        • Digital and analog I/Os:
        • 4 digital inputs: 5-36 V, NPN/PNP programmable
        • 4 digital outputs: 5-36 V, 0.5 A, NPN open-collector
        • 2 analog inputs: 12-bit, 0-5 V
        • Safety:
        • With BA and BR versions: Drive enable circuit
        • With BX versions: 2 safe torque-off inputs, safety integrity level (SIL3/Cat3/PLe)
        • according to EN61800-5-1;-2/ EN61508-3;-4/ EN ISO 13849-1.
        • Feedback devices (dual-loop supported):
        • 1st Feedback:
        • Incremental quad encoder, RS-422 differential (BX & BA models)
        • Sine/cosine incremental encoder, 1 Vpp differential (BX & BA models)
        • Digital Hall sensors (BX & BA models)
        • Resolver (BR model)
        • Pulse & direction interface, RS-422 differential (BX & BA models)
        • 2nd Feedback:
        • Incremental quad encoder, RS-422 differential (all models)
        • Sine/cosine incremental encoder, 1 Vpp differential (BA model)
        • SSI, BiSS (BX & BA models)
        • EnDAT, Hiperface, Absolute A encoders (BA model)
        • Pulse & direction interface, RS-422 differential (BX model)
        • 127 h/w selectable addresses through pin configuration
        • Easy configuration and programming with the EasyMotion Studio software platform
        • Protections: over-current, short-circuit, earth fault, over- / under-voltage, I2t, control error
      • iPOS8010 BX-CAT 11-80V 10A 800W EtherCAT

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 11 – 80 VDC / 9 – 36 VDC
        • Output current: 10 A continuous; 20 A peak current
        • Supports various feedback options including Sin / Cos and absolute encoders
        • Communication via RS232 or EtherCAT
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Closed-frame design, with retractable connectors
        • Size (L x W x H): 139 x 94.2 x 24.5 mm

        Product features
        • Sinusoidal (FOC) or trapezoidal (Hall-based) control of brushless motors
        • Open-loop or closed-loop control of 2-phase and 3-phase steppers
        • Position, speed and torque control
        • Motion modes: position and speed profiles; PVT & PT interpolated, electronic gearing and cam, cyclic synchronous position, speed and torque
        • Motion programming via TML (Technosoft Motion Language)
        • Independent execution of complex motion functions stored in the drive memory
        • Communication:
        • RS-232, up to 115200 baud rate, for setup
        • EtherCAT with CoE protocol
        • Digital and analog I/Os:
        • 4 digital inputs: 5-36 V, NPN/PNP programmable
        • 4 digital outputs: 5-36 V, 0.5 A, NPN open-collector
        • 2 analog inputs: 12-bit, 0-5 V
        • Safety:
        • With BA and BR versions: Drive enable circuit
        • With BX versions: 2 safe torque-off inputs, safety integrity level (SIL3/Cat3/PLe)
        • according to EN61800-5-1;-2/ EN61508-3;-4/ EN ISO 13849-1.
        • Feedback devices (dual-loop supported):
        • 1st Feedback:
        • Incremental quad encoder, RS-422 differential (BX & BA models)
        • Sine/cosine incremental encoder, 1 Vpp differential (BX & BA models)
        • Digital Hall sensors (BX & BA models)
        • Resolver (BR model)
        • Pulse & direction interface, RS-422 differential (BX & BA models)
        • 2nd Feedback:
        • Incremental quad encoder, RS-422 differential (all models)
        • Sine/cosine incremental encoder, 1 Vpp differential (BA model)
        • SSI, BiSS (BX & BA models)
        • EnDAT, Hiperface, Absolute A encoders (BA model)
        • Pulse & direction interface, RS-422 differential (BX model)
        • 127 h/w selectable addresses through pin configuration
        • Easy configuration and programming with the EasyMotion Studio software platform
        • Protections: over-current, short-circuit, earth fault, over- / under-voltage, I2t, control error
      • iPOS8020 BX-CAN 11-80V 20A 1.6kW CANopen/TMLCAN

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 11 – 80 VDC / 9 – 36 VDC
        • Output current: 20 A continuous; 40 A peak current
        • Supports various feedback options including Sin / Cos and absolute encoders
        • Communication via RS232, TMLCAN and CANopen interfaces
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Closed-frame design, with retractable connectors
        • Size (L x W x H): 139 x 94.2 x 24.5 mm

        Product features
        • With BA and BR versions: Drive enable circuit
        • With BX versions: 2 safe torque-off inputs, safety integrity level (SIL3/Cat3/PLe)
        • according to EN61800-5-1;-2/ EN61508-3;-4/ EN ISO 13849-1.
        • Feedback devices (dual-loop supported):
        • 1st Feedback:
        • Incremental quad encoder, RS-422 differential (BX & BA models)
        • Sine/cosine incremental encoder, 1 Vpp differential (BX & BA models)
        • Digital Hall sensors (BX & BA models)
        • Resolver (BR model)
        • Pulse & direction interface, RS-422 differential (BX & BA models)
        • 2nd Feedback:
        • Incremental quad encoder, RS-422 differential (all models)
        • Sine/cosine incremental encoder, 1 Vpp differential (BA model)
        • SSI, BiSS (BX & BA models)
        • Pulse & direction interface, RS-422 differential (BX model)
        • 127 h/w selectable addresses through pin configuration
        • Easy configuration and programming with the EasyMotion Studio software platform
        • Protections: over-current, short-circuit, earth fault, over- / under-voltage, I2t, control error
      • iPOS8020 BX-CAT 11-80V 20A 1.6kW EtherCAT

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 11 – 80 VDC / 9 – 36 VDC
        • Output current: 20 A continuous; 40 A peak current
        • Supports various feedback options including Sin / Cos and absolute encoders
        • Communication via RS232 or EtherCAT
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Closed-frame design, with retractable connectors
        • Size (L x W x H): 139 x 94.2 x 24.5 mm

        Product features
        • Sinusoidal (FOC) or trapezoidal (Hall-based) control of brushless motors
        • Open-loop or closed-loop control of 2-phase and 3-phase steppers
        • Position, speed and torque control
        • Motion modes: position and speed profiles; PVT & PT interpolated, electronic gearing and cam, external reference: analogue or sent via a communication bus
        • Motion programming via TML (Technosoft Motion Language)
        • Communication:
        • RS-232, up to 115200 baud rate
        • EtherCAT with CoE protocols
        • Digital and analog I/Os:
        • 4 digital inputs: 5-36 V, NPN/PNP programmable
        • 4 digital outputs: 5-36 V, 0.5 A, NPN open-collector
        • 2 analog inputs: 12-bit, 0-5 V
        • Safety:
        • With BA and BR versions: Drive enable circuit
        • With BX versions: 2 safe torque-off inputs, safety integrity level (SIL3/Cat3/PLe)
        • according to EN61800-5-1;-2/ EN61508-3;-4/ EN ISO 13849-1.
        • Feedback devices (dual-loop supported):
        • 1st Feedback:
        • Incremental quad encoder, RS-422 differential (BX & BA models)
        • Sine/cosine incremental encoder, 1 Vpp differential (BX & BA models)
        • Digital Hall sensors (BX & BA models)
        • Resolver (BR model)
        • Pulse & direction interface, RS-422 differential (BX & BA models)
        • 2nd Feedback:
        • Incremental quad encoder, RS-422 differential (all models)
        • Sine/cosine incremental encoder, 1 Vpp differential (BA model)
        • SSI, BiSS (BX & BA models)
        • Pulse & direction interface, RS-422 differential (BX model)
        • 127 h/w selectable addresses through pin configuration
      • iPOS8015 BZ-CAT 11-80V 15A RMS 1.7kW EtherCAT

        • Intelligent, compact and freely programmable motor controller
          For brushless, DC brush and step motors
          Motor supply / logic supply / STO supply: 11 – 80 VDC / 9 – 36 VDC / 18-40VDC
          Output current: 15 A RMS continuous; 28 A RMS peak current
          Communication via RS232 or EtherCAT
          STO inputs with safety integrity level SIL3/Cat3/PLe
          Size (L x W x H): 139 x 94.2 x 24.5 mm


        Product features

        The iPOS8015 is a family of fully digital intelligent servo drives, based on the latest DSP technology and they offer unprecedented drive performance combined with an embedded motion controller.Programmable and flexible drive controller with integrated output stage, MotionChip ™ controller, I / O signals, EtherCAT interface, STO safety function and comprehensive support for motor technologies and encoder interfaces. The BZ module was specially developed for integration on a carrier board and offers an ideal solution for various applications with critical room conditions.

        Electrical characteristics:

        • Motor supply / logic supply: 11 – 80 VDC / 9 – 36 VDC
        • Output current: 21 A continuous, 43 A peak current

        Motor types:

        • Brushless DC motors (BLDC, PMSM motors)
        • Brushed DC motors (DC motors)
        • Stepper motors (2- or 3-phase)
        • Voice coil actuators
        • Linear motors
      • iMOTIONCUBE CAN 11-80V 20A 1.6kW CANopen/TMLCAN

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 11 – 80 VDC / 9 – 36 VDC
        • Output current: 20 A continuous; 40 A peak current
        • Supports various feedback options including Sin/Cos and absolute encoders
        • Communication via RS232, TMLCAN and CANopen interfaces
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Size (L x W x H): 60 x 40 x 28.2 mm

        Product features

        Ultra-compact and powerful servo controller with integrated MotionChip ™ controller, CAN / CANopen interface and STO safety function. Universal use thanks to the support of various motor technologies and feedback sensors. The extremely compact design enables easy integration in the smallest of spaces. Designed as a plug-in module (only 60 x 40 x 28.2 mm), the iMotionCube offers the ideal solution for critical room conditions.

        Electrical characteristics:

        • Motor supply / logic supply: 11 – 80 VDC / 9 – 36 VDC
        • Output current: 20 A continuous, 40 A peak current

        Motor types:

        • Brushless DC motors (BLDC, PMSM motors)
        • Brushed DC motors (DC motors)
        • Stepper motors (2- or 3-phase)
        • Voice coil actuators
        • Linear motors
      • iGVD71 CAN-STO 11-80V 100A 8KW CANopen/TMLCAN

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply / STO supply: 11 – 80 VDC / 9 – 36 VDC / 18 – 36 VDC
        • Output current: 100 A continuous; 140 A peak current
        • Supports various feedback options including incremental and absolute encoders
        • Communication via RS232, TMLCAN and CANopen interfaces
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Closed-frame design, with retractable connectors
        • Size (L x W x H): 104.2 x 95 x 47.1 mm

        Product features

        The iGVD71 is a compact high-performance controller that is optimally tailored to the requirements of battery-powered driverless transport systems (AGVs), autonomous mobile robots, and logistics systems. Thanks to the powerful embedded MotionChip ™ controller and the very flexible TML programming language, coordinated and synchronized motor/drive train movements, anti-slip control algorithms, or active torque distribution between the axes (torque biasing) can be implemented. IGVD71 is the ultimate solution for battery-powered mobile applications.

        Electrical characteristics:

        • Motor supply / logic supply / STO supply: 11 – 80 VDC / 9 – 36 VDC / 18 – 36 VDC
        • Output current: 100 A continuous, 140 A peak current

        Motor types:

        • Brushless DC motors (BLDC, PMSM motors)
        • Brushed DC motors (DC motors)
        • Voice coil actuators
        • Linear motors
      • IPOS360X SX MULTI-AXIS MOTION SYSTEM

        • Motion system with up to 4 iPOS360x VX-CAN drive controllers
        • For DC brushless, DC brush, stepper, linear, and voice coil motors
        • Power voltage: 9-36 VDC; Logic voltage: 7-36 VDC
        • Up to 4 A continuous, 10 A peak per drive
        • CAN communication between axes
        • RS-232 and Ethernet for setup
        • Size (L x W x H): 98 x 100.3 x 21.2 mm

        Product features
        • Compact (100.3 x 98 x 37 mm), ready-to-run solution for up to 4 axes.
        • Supply: motor/power: +9 to +36 Vdc; logic: +7 to +36 Vdc
        • Output current:
        • with iPOS3604: 4 A continuous (BLDC mode), 10 A peak current per axis
        • with iPOS3602: 2 A continuous (BLDC mode), 3.2 A peak current per axis
        • Communication: CAN-bus up to 1 Mb/s, RS-232 up to 115 k, and Ethernet 100 Mb/s
        • CAN-bus protocols: CANopen (CiA301 v4.2, DSP305 v2.2, DSP402 v3.0) or Technosoft’s TMLCAN, selectable through a jumper
        • Delivery options: from one to four iPOS3602 VX or iPOS3604 VX Intelligent Servo Drives, each offering:
        • High-performance control of rotary or linear brushless, DC brushed or step motors
        • Sinusoidal (FOC) or trapezoidal (Hall-based) control of brushless motors
        • Open-loop (up to 512 microsteps/step) or closed-loop control of 2-phase and
        • 3-phase steppers
        • Torque, speed or position control
        • Feedback options: incremental single-ended or RS-422 differential encoders, 1 Vpp sine/cosine encoders, digital or linear Hall sensors
        • Various modes of operation: position or speed profiles (trapezoidal or S-curve), interpolated (PT and PVT), external (pulse & direction, analogue), electronic gearing or camming (with master position sent via CANbus)
        • Powerful TML instruction set for definition / execution of motion sequences (TMLCAN protocol)
        • Standalone operation with stored motion sequences (TMLCAN protocol)
        • 5 digital inputs, 5-36 V (compatible with NPN outputs): Enable, 2 limit switches and 2 general-purpose ones
        • 3 digital outputs, 5-36 V, 0.2 A: Ready, Error, 1 general-purpose
        • 2 analog inputs, 12-bit, 0-5 V: Reference, Feedback or general-purpose
        • Feedback devices supported:
        • Incremental quad encoder (single-ended, open collector and differential)
        • Analog sine/cosine incremental encoder (differential 1 Vpp)
        • Digital and linear Hall sensors
        • Easy configuration and programming with EasyMotion Studio software platform
        • Protection to over-current, short-circuit, earth fault, over- / under-voltage, I2t, control error
      • iPOS360x SY-CAN 6-Axis Motion System CANopen/EtherCAT

        • Motion system with up to 6 iPOS360x VX-CAN drive controllers
        • For DC brushless, DC brush, stepper, linear, and voice coil motors
        • Power voltage: 9-36 VDC; Logic voltage: 7-36 VDC
        • Up to 4 A continuous, 10 A peak per drive
        • CAN/CANopen (CiA301, 305 & 402) or EtherCAT (CoE)
        • RS-232 and Ethernet for setup
        • Size (L x W x H): 160 x 122 x 22 mm

        Product features
        • Compact (160 x 122 x 37 mm), ready-to-run solution for up to 6 axes.
        • Supply: motor/power: +12 to +36 Vdc; logic: +12 to +36 Vdc
        • Output current:
        • with iPOS3604: 4 A continuous (BLDC mode), 10 A peak current per axis
        • with iPOS3602: 2 A continuous (BLDC mode), 3.2 A peak current per axis
        • Communication:
        • EtherCAT with CoE protocol (EtherCAT version)
        • CAN-bus up to 1 Mb/s (CAN version) with CANopen (CiA301, 305, 402) and Technosoft’s TMLCAN protocols, selectable through a jumper
        • RS-232 up to 115 k
        • Delivery options: from one to six iPOS3602 VX or iPOS3604 VX intelligent servo drives, each providing:
        • High-performance control of rotary or linear brushless, DC brushed or step motors
        • Sinusoidal (FOC) or trapezoidal (Hall-based) control of brushless motors
        • Open-loop (up to 256 microsteps/step) or closed-loop control of 2-phase and 3-phase steppers
        • Torque, speed or position control
        • Feedback options: incremental single-ended or RS-422 differential encoders, 1 Vpp sine/cosine encoders, digital or linear Hall sensors
        • Various modes of operation: position or speed profiles (trapezoidal or S-curve), interpolated (PT and PVT), external (pulse & direction, analog), electronic gearing or camming (with master position sent via CAN bus)
        • Powerful TML instruction set for definition / execution of motion sequences (TMLCAN protocol)
        • Standalone operation with stored motion sequences (TMLCAN protocol)
        • 5 digital inputs, 5-36 V (compatible with NPN outputs): Enable, 2 limit switches and 2 general-purpose ones
        • 3 digital outputs, 5-36 V, 0.2 A: Ready, Error, 1 general-purpose
        • 2 analog inputs, 12-bit, 0-5 V: reference, feedback or general-purpose
        • Feedback devices supported:
        • Incremental quad encoder (single-ended, open collector and differential)
        • Analog sine/cosine incremental encoder (differential 1 Vpp)
        • Digital and linear Hall sensors
        • Easy configuration and programming with the EasyMotion Studio software platform
        • Protection to over-current, short-circuit, earth fault, over- / under-voltage, I2t, control error
      • iPOS4803-SY Multi Axis System EtherCAT

        • Motion system with 3 or 4 iPOS4803S drive controllers
          Brushless rotary and linear motors, voice coils and DC brushed motors
          Motor supply / logic supply: 7 – 48 VDC / 6 – 48 VDC
          Output current (per drive): 3 A continuous; 14 A peak current
          EtherCAT communication between the drives
          Ethercat protocols: CoE, FoE and EoE
          Size (L x W x H): 94.8 x 84.8 x 28.1 mm

        Product features

        The iPOS4803-SY is a family of fully digital intelligent servo drives, based on the latest DSP technology and they offer unprecedented drive performance combined with an embedded motion controller. Suitable for control of brushless DC, brushless AC (vector control) and DC brushed motors the iPOS4803-SY Multi Axis System accept as position feedback incremental encoders, absolute encoders (SSI, BiSS-C, EnDAT, TAMAGAWA, Panasonic, Nikon, Sanyo Denki), digital and linear Hall signals. All drives perform position, speed or torque control and work in single, multi-axis or stand-alone configurations. Thanks to the embedded motion controller, the iPOS4803-SY Multi Axis System combine controller, drive and PLC functionality in a single compact unit and are capable to execute complex motions without requiring intervention of an external motion controller.

        Electrical characteristics:

        • Power supply:
                     Motor supply: 7 – 48 VDC
                     Logic supply: 6 – 48 VDC
        • Output current (per drive):
                     3 A continuous at 48V motor supply voltage
                     14 A peak current

        Motor types:

        • Brushless DC motors (BLDC, PMSM motors)
        • Brushed DC motors (DC motors)
        • Voice coil actuators
        • Linear and Torque motors
        • 3-Phase Stepper Motors
      • iPOS4808 SY-CAT 4-Axis Motion System EtherCAT

        • 4-axis motion system using iPOS4808 MY
        • For brushless, DC brush and step motors
        • 12-50 V motor supply, 12-36 V logic supply
        • 8 A continuous, 20 A peak current per axis
        • EtherCAT communication (CoE protocol)
        • RS-232 for setup
        • Size (L x W x H): 122.6 x 103.5 x 106.9 mm

        Product features
        • Compact (100 x 124 x 92 mm), ready-to-run solution for up to 4 axes
        • One supply connector: motor/power: +12 to +50 Vdc; logic: +12 to +36 Vdc
        • Output current: 8 A continuous, 20 A peak current per axis
        • Communication: EtherCAT with CoE protocol; RS232 for setup
        • Based on up to 4 iPOS4808 MY intelligent servo drives, each providing:
        • High-performance control of rotary or linear brushless, DC brushed or step motors
        • Sinusoidal (FOC) or trapezoidal (Hall-based) control of brushless motors
        • Open-loop (up to 512 microsteps/step) or closed-loop control of 2-phase and 3-phase steppers
        • Various modes of operation: Torque, speed or position control; position or speed profiles; cyclic synchronous position mode; reference: external analog, or sent via a communication bus
        • TML instruction set for the definition / execution of motion sequences
        • Standalone operation with stored motion sequences
        • Separate Enable circuit (motor not powered when circuit is inactive)
        • Digital and analog I/Os:
        • 6 digital inputs, 5-36 V, NPN or PNP (Enable, 2 limit switches and 3 general-purpose ones)
        • 5 digital outputs, 5-36 V, 0.5 A, NPN open-collector (Ready, Error, 3 general-purpose)
        • 2 analog inputs, 12-bit, 0-5 V: Reference, Feedback or general-purpose
        • Feedback devices (dual-loop support):
        • 1st Feedback:
        • Incremental quad encoder (single-ended, open collector and differential)
        • Analog sine/cosine incremental encoder (differential 1 Vpp)
        • Digital and linear Hall sensors
        • 2nd Feedback (dual loop)/digital reference:
        • Incremental quad encoder or pulse & direction (differential)
        • SSI / BiSS* encoder interface
        • Easy configuration and programming with EasyMotion Studio software platform
        • Protection to over-current, short-circuit, earth fault, over- / under-voltage, I2t, control error
      • iPOS4808 MY-STO 11-50V 8A 400W EtherCAT

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 11 – 50 VDC / 12 – 36 VDC
        • Output current: 8 A continuous; 20 A peak current
        • Communication via RS232 or EtherCAT
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • For soldering / plugging in with pin headers with a grid dimension of 2.54 mm
        • Size (L x W x H): 64 x 43.6 x 22 mm

        Product features
        Electrical characteristics:
        • Motor supply / logic supply: 11 – 50 VDC / 12 – 36 VDC
        • Output current: 8 A continuous, 20 A peak current
        Motor types:
        • Brushless DC motors (BLDC, PMSM motors)
        • Brushed DC motors (DC motors)
        • Stepper motors (2- or 3-phase)
        • Voice coil actuators
        • Linear motors
        Control:
        • Via EtherCAT Bus, pulse and direction or analog/digital inputs
        • Autonomous execution of complex motion sequences stored in the nonvolatile memory of the drive.
      • iMOTIONCUBE CAT 11-80V 20A 1.6kW EtherCAT

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply: 11 – 80 VDC / 9 – 36 VDC
        • Output current: 20 A continuous; 40 A peak current
        • Supports various feedback options including Sin/Cos and absolute encoders
        • Communication via RS232 or EtherCAT
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Size (L x W x H): 60 x 40 x 28.2 mm

        Product features
        Electrical characteristics:
        • Motor supply / logic supply: 11 – 80 VDC / 9 – 36 VDC
        •  Output current: 20 A continuous, 40 A peak current
        Motor types:
        • Brushless DC motors (BLDC, PMSM motors)
        • Brushed DC motors (DC motors)
        • Stepper motors (2- or 3-phase)     
        •  Voice coil actuators
        • Linear motors
        Control:
        • Via EtherCAT Bus, pulse and direction or analog/digital inputs
        • Autonomous execution of complex motion sequences stored in the nonvolatile memory of the drive.
      • iGVD71 CAN-STO 11-80V 100A 8KW CANopen/TMLCAN

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply / STO supply: 11 – 80 VDC / 9 – 36 VDC / 18 – 36 VDC
        • Output current: 100 A continuous; 140 A peak current
        • Supports various feedback options including Sin / Cos and absolute encoders
        • Communication via RS232, TMLCAN and CANopen interfaces
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Closed-frame design, with retractable connectors
        • Size (L x W x H): 104.2 x 95 x 47.1 mm

        Product features
        Electrical characteristics:
        • Motor supply / logic supply / STO supply: 11 – 80 VDC / 9 – 36 VDC / 18 – 36 VDC
        • Output current: 100 A continuous, 140 A peak current
        Motor types:
        • Brushless DC motors (BLDC, PMSM motors)     
        •  Brushed DC motors (DC motors)     
        •  Voice coil actuators     
        •  Linear motors
        Control:
        • Via CAN Bus, pulse and direction or analog/digital inputs
        • Autonomous execution of complex motion sequences stored in the nonvolatile memory of the drive.
      • iPOS4810 MZ-CAN 11-50V 10A RMS 700W CAN/TMLCAN

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 10 A RMS continuous; 28 A RMS peak current
        • Communication via RS232, TMLCAN and CANopen interfaces
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Size (L x W x H): 64 x 43.6 x 13.7 mm

        Product features
        Electrical characteristics:
        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 10 A RMS continuous, 28 A RMS peak curren
        Motor types:
        • Brushless DC motors (BLDC, PMSM motors)
        • Brushed DC motors (DC motors)
        • Stepper motors (2- or 3-phase)
        • Voice coil actuators
        • Linear motors
        Control:
        • Via EtherCAT Bus, pulse and direction or analog/digital inputs
        • Autonomous execution of complex motion sequences stored in the nonvolatile memory of the drive.
      • iPOS4810 MZ-CAT 11-50V 10A RMS 700W EtherCAT

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 10 A RMS continuous; 28 A RMS peak current
        • Communication via RS232 or EtherCAT
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Size (L x W x H): 64 x 43.6 x 13.7 mm

        Product features
        Electrical characteristics:
        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 10 A RMS continuous; 28 A RMS peak currentt
        Motor types:
        • Brushless DC motors (BLDC, PMSM motors)
        • Brushed DC motors (DC motors)
        • Stepper motors (2- or 3-phase)     
        •  Voice coil actuators
        • Linear motors
        Control:
        • Via EtherCAT Bus, pulse and direction or analog/digital inputs
        • Autonomous execution of complex motion sequences stored in the nonvolatile memory of the drive.
      • iPOS4810 XZ-CAN 11-50V 10A RMS 700W CAN/TMLCAN

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 10 A RMS continuous; 28 A RMS peak current
        • Communication via RS232, TMLCAN and CANopen interfaces
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Size (L x W x H): 64 x 43.6 x 13.7 mm

        Product features
        Electrical characteristics:
        •  Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 10 A RMS continuous, 28 A RMS peak current
        Motor types:
        • Brushless DC motors (BLDC, PMSM motors)     
        •  Brushed DC motors (DC motors)     
        • Stepper motors (2- or 3-phase)
        •  Voice coil actuators     
        •  Linear motors
        Control:
        • Via CAN Bus, pulse and direction or analog/digital inputs
        • Autonomous execution of complex motion sequences stored in the nonvolatile memory of the drive.
      • iPOS4810 XZ-CAT 11-50V 10A RMS 700W EtherCAT

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 10 A RMS continuous; 28 A RMS peak current
        • Communication via RS232 or EtherCAT
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Size (L x W x H): 93 x 43.8 x 32 mm

        Product features
        Electrical characteristics:
        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC     
        •  Output current: 10 A RMS continuous, 28 A RMS peak current
        Motor types:
        • Brushless DC motors (BLDC, PMSM motors)
        • Brushed DC motors (DC motors)
        • Stepper motors (2- or 3-phase)
        • Voice coil actuators
        • Linear motors
        Control:
        • Via EtherCAT Bus, pulse and direction or analog/digital inputs
        • Autonomous execution of complex motion sequences stored in the nonvolatile memory of the drive.
      • iPOS4815 MZ-CAN 11-50V 15A RMS 1kW CAN/TMLCAN

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 15 A RMS continuous; 28 A RMS peak current
        • Communication via RS232, TMLCAN and CANopen interfaces
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Size (L x W x H): 64 x 43.6 x 13.7 mm

        Product features
        Electrical characteristics:
        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 15 A RMS continuous, 28 A RMS peak current
        Motor types:
        • Brushless DC motors (BLDC, PMSM motors)
        • Brushed DC motors (DC motors)
        • Stepper motors (2- or 3-phase)     
        •  Voice coil actuators
        • Linear motors
        Control:
        • Via EtherCAT Bus, pulse and direction or analog/digital inputs
        • Autonomous execution of complex motion sequences stored in the nonvolatile memory of the drive.
      • iPOS4815 MZ-CAT 11-50V 15A RMS 1kW EtherCAT

        • Intelligent, compact and freely programmable motor controller
        • For brushless, DC brush and step motors
        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 15 A RMS continuous; 28 A RMS peak current
        • Communication via RS232 or EtherCAT
        • STO inputs with safety integrity level SIL3/Cat3/PLe
        • Size (L x W x H): 64 x 43.6 x 13.7 mm

        Product features
        Electrical characteristics:
        • Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC
        • Output current: 15 A RMS continuous; 28 A RMS peak current

        Motor types:
        • Brushless DC motors (BLDC, PMSM motors)     
        •  Brushed DC motors (DC motors)     
        • Stepper motors (2- or 3-phase)
        •  Voice coil actuators     
        •  Linear motors
        Control:
        • Via CAN Bus, pulse and direction or analog/digital inputs
        • Autonomous execution of complex motion sequences stored in the nonvolatile memory of the drive.
    • Intelligent Motors

    • The iMOT line of intelligent brushless and step motors combines an intelligent drive, a motor and a position sensor into a single unit. The result is a compact cost effective solution that translates motion commands received through a communication channel into mechanical motion.
        • iMOT172S XM-CAN 12-48V 300 mNm Stepper motor CANopen/TMLCAN

          • Stepper motor with embedded drive and motion controller
          • Stepper motor with an integrated freely programmable servo controller
          • High dynamics and efficiency through field-oriented control (FOC)
          • Operating voltage: 12 – 48 V / nominal torque: 300 mNm
          • Magnetic single-turn absolute encoder with 4096 I / rev. (12 bit)
          • Interface: CANopen / TMLCAN, RS232
          • Connector system: Molex Micro-Fit

          Product features
          • Intelligent step motor with embedded motion controller, drive and position feedback
          • Cost-effective positioning system, due to compactness and elimination of motor wiring
          • Continuous torque: 300 mNm at up to 1300 rpm
          • No-load speed: 1750 rpm at 48 V
          • Motion modes: position and speed profiles; PVT & PT interpolated, electronic gearing and cam, external reference: analogue or sent via a communication bus
          • Motion programming in TML (Technosoft Motion Language), or using motion libraries for PC or PLC
          • Standalone operation of complete motion programs stored in the drive's memory
          • Communication:
          • RS-232 up to 115 kbaud
          • CAN-Bus up to 1 Mbit, with TMLCAN or CANopen (CiA301, 305 & 402) protocols
          • Digital and analog I/Os:
          • 5 digital inputs: 5-36 V
          • 2 digital outputs: 0-5 V; 0.5 A
          • 1 analog input: 12-bit resolution, 0-5 V
          • Feedback devices: Integrated position sensor offering a resolution of 4096 counts / revolution
          • Programmable protections to: over-current, over-temperature, short-circuit, overvoltage, undervoltage, I2t, control error
        • IMOT17XS TM-CAN 300 MNM TMLCAN & CANOPEN

          • Stepper motor with embedded drive and motion controller
          • Stepper motor with an integrated freely programmable servo controller
          • High dynamics and efficiency through field-oriented control (FOC)
          • Operating voltage: 12 – 48 V / nominal torque: 300 mNm
          • Magnetic single-turn absolute encoder with 4096 I / rev. (12 bit)
          • Interface: CANopen / TMLCAN, RS232
          • Connector system: M8 / M12

          Product features
          • Intelligent step motor with embedded motion controller, drive and position feedback
          • Stepper turned into a true servo motor, due to the FOC and stepless technique by Technosoft
          • Cost-effective positioning system, due to compactness and elimination of motor wiring
          • Continuous torque: 300 mNm at up to 1300 rpm
          • No-load speed: 1750 rpm at 48 V
          • Motion modes: position and speed profiles; PVT & PT interpolated, electronic gearing and cam, external reference: analog, or sent via communication bus
          • Motion programming in TML (Technosoft Motion Language), or using motion libraries for PC or PLC
          • Standalone operation of complete motion programs stored in the drive's memory
          • Communication:
          • RS-232 up to 115 kbaud
          • CAN-Bus up to 1 Mbit, with TMLCAN or CANopen (CiA301, 305 & 402) protocols
          • Digital and analog I/Os:
          • 4 digital inputs: 5-36 V
          • 2 digital outputs: 0-5 V; 0.5 A
          • 1 analog input: 12-bit resolution, 0-5 V
          • Feedback devices: absolute single-turn integrated position sensor offering a resolution of 4096 counts / revolution
          • Programmable protections to: over-current, over-temperature, short-circuit, overvoltage, undervoltage, I2t, control error
        • iMOT172S TM-CAT 12-48V 300 mNm Stepper motor EtherCAT

          • Stepper motor with embedded drive and motion controller
          • Stepper motor with an integrated freely programmable servo controller
          • High dynamics and efficiency through field-oriented control (FOC)
          • Operating voltage: 12 – 48 V / nominal torque: 300 mNm
          • Magnetic single-turn absolute encoder with 4096 I / rev. (12 bit)
          • Interface: EtherCAT and RS232
          • Connector system: M8 / M12

          Product features
          • Intelligent step motor with embedded motion controller, drive and position feedback
          • Stepper turned into a true servo motor, due to the FOC and stepless technique by Technosoft
          • Cost-effective positioning system, due to compactness and elimination of motor wiring
          • Continuous torque: 300 mNm at up to 1300 rpm
          • No-load speed: 1750 rpm at 48 V
          • Motion modes: position and speed profiles; PVT & PT interpolated, electronic gearing and cam, external reference: analog, or sent via communication bus
          • Communication: EtherCAT with CAN application protocol over EtherCAT (CoE)
          • Digital and analog I/Os:
          • 4 digital inputs: 5-36 V
          • 2 digital outputs: 0-5 V; 0.5 A
          • 1 analog input: 12-bit resolution, 0-5 V
          • Feedback devices: absolute single-turn integrated position sensor offering a resolution of 4096 counts / revolution
          • Programmable protections to: over-current, over-temperature, short-circuit, overvoltage, undervoltage, I2t, control error
        • iMOT171B XM-CAN 12-48V 80 mNm Brushless motor CANopen/TMLCAN

          • Brushless motor with embedded drive and motion controller
          • Brushless motor with an integrated freely programmable servo controller
          • High dynamics and efficiency through field-oriented control (FOC)
          • Operating voltage: 12 – 48 V / nominal torque: 80 mNm
          • Magnetic single-turn absolute encoder with 4096 I / rev. (12 bit)
          • Interface: CANopen / TMLCAN, RS232
          • Connector system: Molex Micro-Fit

          Product features
          • Intelligent brushless servo motor with embedded motion controller, drive and position feedback
          • Cost-effective positioning system, due to compactness and elimination of motor wiring
          • Continuous torque at 3000 rpm: 100 mNm
          • Motion modes: position and speed profiles; PVT & PT interpolated, electronic gearing and cam, external reference (analogue, or sent via communication bus)
          • Motion programming in TML (Technosoft Motion Language), or using motion libraries for PC or PLC
          • Standalone operation of complete motion programs stored in the drive's memory
          • Communication:
          • RS-232 up to 115 kbaud
          • CAN-Bus up to 1Mbit, with TMLCAN or CANopen (CiA301, 305 & 402) protocols
          • Digital and analog I/Os:
          • 5 digital inputs: 5-36 V
          • 2 digital outputs: 0-5 V; 0,5 A
          • 1 analog input: 12-bit resolution, 0-5 V
          • Feedback devices: Integrated position sensor offering a resolution of 4096 counts / revolution
          • Programmable protections to: over-current, short-circuit, overvoltage, undervoltage, I2t, control error
        • iMOT171B TM-CAN 12-48V 80 mNm Brushless motor CANopen/TMLCAN

          • Brushless motor with embedded drive and motion controller
          • Brushless motor with an integrated freely programmable servo controller
          • High dynamics and efficiency through field-oriented control (FOC)
          • Operating voltage: 12 – 48 V / nominal torque: 80 mNm
          • Magnetic single-turn absolute encoder with 4096 I / rev. (12 bit)
          • Interface: CANopen / TMLCAN, RS232
          • Connector system: M8 / M12

          Product features
          • Fully digital intelligent brushless servo motor with embedded motion controller, drive and position feedback
          • Cost-effective positioning system, due to compactness and elimination of motor wiring
          • Continuous torque at 3000 rpm: 100 mNm
          • Motion modes: position and speed profiles; PVT & PT interpolated, electronic gearing and cam, external reference: analogue or sent via a communication bus
          • Motion programming in TML (Technosoft Motion Language), or using motion libraries for PC or PLC
          • Standalone operation of complete motion programs stored in the drive's memory
          • Communication: CAN-Bus up to 1 Mbit, with TMLCAN or CANopen (CiA301, 305 & 402) protocols
          • Digital and analog I/Os:
          • 4 digital inputs: 5-36 V
          • 3 digital outputs: 0-5 V; 0.5 A
          • 1 analog input: 12-bit resolution, 0-5 V
          • Standard M8 and M12 connectors for CANbus and I/Os
          • Feedback devices: Integrated position sensor offering a resolution of 4096 counts / revolution
          • Programmable protections to: over-current, short-circuit, overvoltage, undervoltage, I2t, control error
        • IMOT171B TM-CAT 100-300 MNM ETHERCAT

          • Brushless motor with embedded drive and motion controller
          • Brushless motor with an integrated freely programmable servo controller
          • High dynamics and efficiency through field-oriented control (FOC)
          • Operating voltage: 12 – 48 V / nominal torque: 80 mNm
          • Magnetic single-turn absolute encoder with 4096 I / rev. (12 bit)
          • Interface: EtherCAT, RS232
          • Connector system: M8 / M12

          Product features
          • Fully digital intelligent brushless servo motor with embedded motion controller, drive and position feedback
          • Cost-effective positioning system, due to compactness and elimination of motor wiring
          • Continuous torque at 3000 rpm: 300 mNm
          • Motion modes: position and speed profiles; PVT & PT interpolated, electronic gearing and cam, external reference: analogue or sent via a communication bus
          • Motion programming in TML (Technosoft Motion Language), or using motion libraries for PC or PLC
          • Standalone operation of complete motion programs stored in the drive's memory
          • Communication: EtherCAT with CAN application protocol over EtherCAT (CoE)
          • Digital and analog I/Os:
          • 4 digital inputs: 5-36 V
          • 3 digital outputs: 0-5 V; 0.5 A
          • 1 analog input: 12-bit resolution, 0-5 V
          • Standard M8 and M12 connectors for CANbus and I/Os
          • Feedback devices: Integrated position sensor offering a resolution of 4096 counts / revolution
          • Programmable protections to: over-current, short-circuit, overvoltage, undervoltage, I2t, control error
        • iMOT172B XM-CAN 12-48V 160 mNm Brushless motor CANopen/TMLCAN

          • Brushless motor with embedded drive and motion controller
          • Brushless motor with integrated freely programmable servo controller
          • High dynamics and efficiency through field-oriented control (FOC)
          • Operating voltage: 12 – 48 V / nominal torque: 160 mNm
          • Magnetic singleturn absolute encoder with 4096 I / rev. (12 bit)
          • Interface: CANopen / TMLCAN, RS232
          • Connector system: Molex Micro-Fit

          Product features
          Electrical characteristics:
          • Operating voltage: 12 - 48 VDC / nominal current: 3.1 A
          • Nominal torque: 160 mNm @ 4000 rpm
          Communication:
          •   RS232 - up to 115 Kbit/s
          •   CANopen - according to CiA profiles 301, 305 and 402     
          • TMLCAN - Technosoft proprietary CAN protocol
          Digital and analog inputs/outputs:
          • 5 digital inputs: 5-24 V, NPN or PNP configurable
          • 2 digital outputs: 5-24 V, 0.5 A, NPN Open-Collector
          • 1 analog input: 12 bit, 0-5 V
        • iMOT172B TM-CAN 12-48V 160 mNm Brushless motor CANopen/TMLCAN

          • Brushless motor with embedded drive and motion controller
          • Brushless motor with an integrated freely programmable servo controller
          • High dynamics and efficiency through field-oriented control (FOC)
          • Operating voltage: 12 – 48 V / nominal torque: 160 mNm
          • Magnetic single-turn absolute encoder with 4096 I / rev. (12 bit)
          • Interface: CANopen / TMLCAN, RS232
          • Connector system: M8 / M12

          Product features
          Electrical characteristics:
          • Operating voltage: 12 - 48 VDC / nominal current: 3.1 A
          • Nominal torque: 160 mNm @ 4000 rpm
          Communication:
          • RS232 - up to 115 Kbit/s
          • CANopen - according to CiA profiles 301, 305 and 402     
          • TMLCAN - Technosoft proprietary CAN protocol
          Digital and analog inputs/outputs:
          • 4 digital inputs: 5-24 V, NPN or PNP configurable     
          •  2 digital outputs: 5-24 V, 0.5 A, NPN Open-Collector
          • 1 analog input: 12 bit, 0-5 V
        • iMOT172B TM-CAT 12-48V 160 mNm Brushless motor EtherCAT

          • Brushless motor with embedded drive and motion controller
          • Brushless motor with integrated freely programmable servo controller
          • High dynamics and efficiency through field-oriented control (FOC)
          • Operating voltage: 12 – 48 V / nominal torque: 160 mNm
          • Magnetic singleturn absolute encoder with 4096 I / rev. (12 bit)
          • Interface: EtherCAT, RS232
          • Connector system: M8 / M12

          Product features
          Electrical characteristics:
          • Operating voltage: 12 - 48 VDC / nominal current: 3.1 A
          • Nominal torque: 160 mNm @ 4000 rpm
          Communication:
          • RS232 - up to 115 Kbit/s
          • EtherCAT - with CANopen over EtherCAT (CoE) protocol
          Digital and analog inputs/outputs:
          •   4 digital inputs: 5-24 V, NPN or PNP configurable
          • 2 digital outputs: 5-24 V, 0.5 A, NPN Open-Collector
          • 1 analog input: 12 bit, 0-5 V
        • iMOT173B XM-CAN 12-48V 240 mNm Brushless motor CANopen/TMLCAN

          • Brushless motor with embedded drive and motion controller
          • Brushless motor with integrated freely programmable servo controller
          • High dynamics and efficiency through field-oriented control (FOC)
          • Operating voltage: 12 – 48 V / nominal torque: 160 mNm
          • Magnetic singleturn absolute encoder with 4096 I / rev. (12 bit)
          • Interface: CANopen / TMLCAN, RS232
          • Connector system: Molex Micro-Fit

          Product features
          Electrical characteristics:
          • Operating voltage: 12 - 48 VDC / nominal current: 3.1 A
          • Nominal torque: 160 mNm @ 4000 rpm
          Communication:
          • RS232 - up to 115 Kbit/s
          • CANopen - according to CiA profiles 301, 305 and 402     
          • TMLCAN - Technosoft proprietary CAN protocol
          Digital and analog inputs/outputs:
          • 5 digital inputs: 5-24 V, NPN or PNP configurable
          • 2 digital outputs: 5-24 V, 0.5 A, NPN Open-Collector
          • 1 analog input: 12 bit, 0-5 V
        • iMOT173B TM-CAN 12-48V 240 mNm Brushless motor CANopen/TMLCAN

          • Brushless motor with embedded drive and motion controller
          • Brushless motor with an integrated freely programmable servo controller
          • High dynamics and efficiency through field-oriented control (FOC)
          • Operating voltage: 12 – 48 V / nominal torque: 160 mNm
          • Magnetic single-turn absolute encoder with 4096 I / rev. (12 bit)
          • Interface: CANopen / TMLCAN, RS232
          • Connector system: M8 / M12

          Product features
          Electrical characteristics:
          • Operating voltage: 12 - 48 VDC / nominal current: 3.6 A
          • Nominal torque: 240 mNm @ 4000 rpm
          Communication:
          • RS232 - up to 115 Kbit/s
          • CANopen - according to CiA profiles 301, 305 and 402     
          • TMLCAN - Technosoft proprietary CAN protocol
          Digital and analog inputs/outputs:
          • 4 digital inputs: 5-24 V, NPN or PNP configurable     
          • 2 digital outputs: 5-24 V, 0.5 A, NPN Open-Collector
          • 1 analog input: 12 bit, 0-5 V
        • iMOT173B TM-CAT 12-48V 240 mNm Brushless motor EtherCAT

          • Brushless motor with embedded drive and motion controller
          • Brushless motor with integrated freely programmable servo controller
          • High dynamics and efficiency through field-oriented control (FOC)
          • Operating voltage: 12 – 48 V / nominal torque: 160 mNm
          • Magnetic singleturn absolute encoder with 4096 I / rev. (12 bit)
          • Interface: EtherCAT, RS232
          • Connector system: M8 / M12

          Product features
          Electrical characteristics:
          • Operating voltage: 12 - 48 VDC / nominal current: 3.1 A
          • Nominal torque: 240 mNm @ 4000 rpm
          Communication:
          • RS232 - up to 115 Kbit/s
          • EtherCAT - with CANopen over EtherCAT (CoE) protocol
          Digital and analog inputs/outputs:
          • 4 digital inputs: 5-24 V, NPN or PNP configurable
          • 2 digital outputs: 5-24 V, 0.5 A, NPN Open-Collector
          • 1 analog input: 12 bit, 0-5 V
        • iMOT232S XM-CAN 12-48V 1.0 Nm Stepper motor CANopen/TMLCAN

          • Intelligent stepper, NEMA 23
          • Embedded drive and motion controller
          • Continuous torque: 1.5 Nm
          • Motor supply: 12.5-48 V; logic supply: 12.5-36 V
          • Integrated position sensor: 4096 counts/rev
          • Inputs: 5 digital, 1 analog. Outputs: 2 digital
          • TMLCAN & CANopen communication
          • Rectangular connectors

          Product features
          • Intelligent step motor with embedded motion controller, drive and position feedback
          • Cost-effective positioning system, due to compactness and elimination of motor wiring
          • Continuous torque: 1.5 Nm
          • Motion modes: position and speed profiles; PVT & PT interpolated, electronic gearing and cam, external reference: analogue or sent via a communication bus
          • Motion programming in TML (Technosoft Motion Language), or using motion libraries for PC or PLC
          • Standalone operation of complete motion programs stored in the drive's memory
          • Communication:
          • RS-232 up to 115 kbaud
          • CAN-Bus up to 1 Mbit, with TMLCAN or CANopen (CiA301 & 402) protocols
          • Digital and analog I/Os:
          • 5 digital inputs: 5-36 V
          • 2 digital outputs: 0-5 V; 0.5 A
          • 1 analog input: 12-bit resolution, 0-5 V
          • Feedback devices: Integrated position sensor offering a resolution of 4096 counts / revolution
          • Programmable protections to: over-current, over-temperature, short-circuit, overvoltage, undervoltage, I2t, control error
        • iMOT232S TM-CAN 12-48V 1.0 Nm Stepper motor CANopen/TMLCAN

          • Intelligent stepper, NEMA 23
          • Embedded drive and motion controller
          • Continuous torque: 1.5 Nm
          • Motor supply: 12.5-48 V; logic supply: 12.5-36 V
          • Integrated position sensor: 4096 counts/rev
          • Inputs: 4 digital, 1 analog. Outputs: 2 digital
          • TMLCAN & CANopen communication
          • Circular connectors, M8 and M12

          Product features
          • Intelligent step motor with embedded motion controller, drive and position feedback
          • Cost-effective positioning system, due to compactness and elimination of motor wiring
          • Continuous torque: 1.5 Nm
          • Motion modes: position and speed profiles; PVT & PT interpolated, electronic gearing and cam, external reference: analogue or sent via a communication bus
          • Motion programming in TML (Technosoft Motion Language), or using motion libraries for PC or PLC
          • Standalone operation of complete motion programs stored in the drive's memory
          • Communication:
          • RS-232 up to 115 kbaud
          • CAN-Bus up to 1 Mbit, with TMLCAN or CANopen (CiA301 & 402) protocols
          • Digital and analog I/Os:
          • 5 digital inputs: 5-36 V
          • 2 digital outputs: 0-5 V; 0.5 A
          • 1 analog input: 12-bit resolution, 0-5 V
          • Feedback devices: Integrated position sensor offering a resolution of 4096 counts / revolution
          • Programmable protections to: over-current, over-temperature, short-circuit, overvoltage, undervoltage, I2t, control error
        • IMOT232S TM-CAT 1.0-1.5 NM ETHERCAT

          • Intelligent stepper motor, NEMA 23
          • Embedded drive and motion controller
          • Continuous torque: 1.0mNm (iMOT232S)/1,5Nm (iMOT233S)
          • Motor supply: 12-48 V; logic supply: 12-36 V
          • Position sensor: 4096 counts/rev, absolute single-turn
          • Inputs: 4 digital, 1 analog. Outputs: 2 digital
          • Circular M8 and M12 connectors
          • EtherCAT communication with CoE protocol

          Product features
          • Intelligent step motor with embedded motion controller, drive and position feedback
          • Stepper turned into a true servo motor, due to the FOC and stepless technique by Technosoft
          • Cost-effective positioning system, due to compactness and elimination of motor wiring
          • Continuous torque: 1000 and 1600 mNm
          • No-load speed: 1400 and 750rpm at 48 V
          • Motion modes: position and speed profiles; PVT & PT interpolated, electronic gearing and cam, external reference: analog, or sent via communication bus
          • Communication: EtherCAT with CAN application protocol over EtherCAT (CoE)
          • Digital and analog I/Os:
          • 4 digital inputs: 5-36 V (PNP and NPN)
          • 2 digital outputs: 0-5 V; 0.5 A (PNP and NPN)
          • 1 analog input: 12-bit resolution, 0-5 V
          • Feedback devices: absolute single-turn integrated position sensor offering a resolution of 4096 counts / revolution
          • Programmable protections to: over-current, over-temperature, short-circuit, overvoltage, undervoltage, I2t, control error
        • iMOT233S XM-CAN 12-48V 1.6 Nm Stepper motor CANopen/TMLCAN

          • Stepper motor with embedded drive and motion controller
          • Stepper motor with an integrated freely programmable servo controller
          • High dynamics and efficiency through field-oriented control (FOC)
          • Operating voltage: 12 – 48 V / nominal torque: 1.6 Nm
          • Magnetic single-turn absolute encoder with 4096 I / rev. (12 bit)
          • Interface: CANopen / TMLCAN, RS232
          • Connector system: Molex Micro-Fit

          Product features
          Electrical characteristics:
          • Operating voltage: 12 - 48 VDC / nominal current: 2.8 A
          • Nominal torque: 1.6 Nm @ 750 rpm
          • No load speed: 1400 rpm @ 48 VDC
          Communication:
          • RS232 - up to 115 Kbit/s
          • CANopen - according to CiA profiles 301, 305 and 402     
          • TMLCAN - Technosoft proprietary CAN protocol
          Digital and analog inputs/outputs:
          • 5 digital inputs: 5-24 V, NPN or PNP configurable
          • 2 digital outputs: 5-24 V, 0.5 A, NPN Open-Collector
          • 1 analog input: 12 bit, 0-5 V
        • iMOT233S TM-CAN 12-48V 1.6 Nm Stepper motor CANopen/TMLCAN

          • Stepper motor with embedded drive and motion controller
          • Stepper motor with an integrated freely programmable servo controller
          • High dynamics and efficiency through field-oriented control (FOC)
          • Operating voltage: 12 – 48 V / nominal torque: 1.6 Nm
          • Magnetic single-turn absolute encoder with 4096 I / rev. (12 bit)
          • Interface: CANopen / TMLCAN, RS232
          • Connector system: M8 / M12

          Product features
          Electrical characteristics:
          • Operating voltage: 12 - 48 VDC / nominal current: 2.8 A
          • Nominal torque: 1.6 Nm @ 750 rpm     
          •  No load speed: 1400 rpm @ 48 VDC
          Communication:
          • RS232 - up to 115 Kbit/s
          • CANopen - according to CiA profiles 301, 305 and 402     
          • TMLCAN - Technosoft proprietary CAN protocol
          Digital and analog inputs/outputs:
          • 4 digital inputs: 5-24 V, NPN or PNP configurable     
          • 2 digital outputs: 5-24 V, 0.5 A, NPN Open-Collector
          • 1 analog input: 12 bit, 0-5 V
        • iMOT233S TM-CAT 12-48V 1.6 Nm Stepper motor EtherCAT

          • Stepper motor with embedded drive and motion controller
          • Stepper motor with an integrated freely programmable servo controller
          • High dynamics and efficiency through field-oriented control (FOC)
          • Operating voltage: 12 – 48 V / nominal torque: 1.6 Nm
          • Magnetic single-turn absolute encoder with 4096 I / rev. (12 bit)
          • Interface: EtherCAT, RS232
          • Connector system: M8 / M12

          Product features
          Electrical characteristics:
          • Operating voltage: 12 - 48 VDC / nominal current: 2.8 A
          • Nominal torque: 1.6 Nm @ 750 rpm     
          •  No load speed: 1400 rpm @ 48 VDC
          Communication:
          • RS232 - up to 115 Kbit/s
          • EtherCAT - with CANopen over EtherCAT (CoE) protocol
          Digital and analog inputs/outputs:
          • 4 digital inputs: 5-24 V, NPN or PNP configurable
          • 2 digital outputs: 5-24 V, 0.5 A, NPN Open-Collector
          • 1 analog input: 12 bit, 0-5 V
      • Micro Motors

          • Slotless Brushless DC Motors

          • Technosoft coreless DC motors have major advantages compared to traditional DC motors including high efficiency, low mechanical time, and very low inertia. Because the core it’s constructed without iron and mass it’s low, it has the ability to accelerated and decelerated more faster than any other DC motor. The absence of iron eliminates cogging and the coreless motor operates smoothly, even at low speeds. One of the advantages we offer to the customers is modularization because they can be equipped with gearhead, encoders, and drive to provide a complete solution for your needs. We managed to bring the performance you want at a low price. Motors specifications, assembly options and accessories can be found in the complete catalog of the micro motors
            • Smooth control
            • Small Size (Ø8, Ø10, Ø13, Ø16, Ø17 and Ø24 mm)
            • High Torque
            • High Speed
            • Modular design
            • No cogging torque
            • Low weight
            • Cost effective
              • TSU13026

              • Slotless BLDC Motor, F13mm, 2.8mNm, 20000rpm
              • TSU13038

              • Slotless BLDC Motor, F13mm, 5.5mNm, 20000rpm
              • TSU16036

              • Slotless BLDC Motor, Ø16mm, 9.4mNm, 14000rpm
              • TSH16056

              • Slotless BLDC Motor, F16mm, 13.2mNm, 46000rpm
              • TSU22048

              • Slotless BLDC Motor, F22mm, 33.1mNm, 17000rpm
              • TSH22045

              • Slotless BLDC Motor, F22mm, 21.2mNm, 37000rpm
              • TSH22060

              • Slotless BLDC Motor, F22mm, 33.8mNm, 36000rpm
            • Coreless Brushed DC Motors

            • Innovative and independent patented ironless motor winding design delivers high power in a compact size. The brushless motors are manufactured in two versions to match wide application requirements: the TSU version is dedicated to standard speed and torque applications, and the TSH models have been optimized for higher speeds. Furthermore, the motors exhibit low noise, low inertia, and short response time to satisfy any dynamic application. The stator of a typical brushless motor is constructed using slots and the stator winding is shaped around them, this technology is very known and the issues that come with it aren’t to be neglected. The main issue is cogging torque which is a challenge in applications that require fast response, fast acceleration, and smooth operation.
              • Ironless Winding
              • Small Size (Ø13, Ø16 and Ø22 mm)
              • High Torque
              • High Speed
              • Modular design
              • Long operational lifetime
              • Cost effective
              • Silent operation
                • TCU08017

                • Coreless Brushed DC Motor, Ø8mm, 0.6mNm, 5400rpm
                • TCU10017

                • Coreless Brushed DC Motor, Ø10mm, 0.71mNm, 5000rpm
                • TCU10025

                • Coreless Brushed DC Motor, Ø10mm, 1.63mNm, 6700rpm
                • TCU13020

                • Coreless Brushed DC Motor, Ø13mm, 1.83mNm, 8600rpm
                • TCU13028

                • Coreless Brushed DC Motor, Ø13mm, 3.48mNm, 7900rpm
                • TCU16025

                • Coreless Brushed DC Motor, Ø16mm, 2.23mNm, 8100rpm
                • TCU17025

                • Coreless Brushed DC Motor, Ø17mm, 3.89mNm, 8200rpm
                • TCU17035

                • Coreless Brushed DC Motor, Ø17mm, 7.72mNm, 9000rpm
                • TCU24032

                • Coreless Brushed DC Motor, Ø24mm, 10.92mNm, 8000rpm
              • Industries

              • The iMOT line of intelligent brushless and step motors combines an intelligent drive, a motor and a position sensor into a single unit. The result is a compact cost effective solution that translates motion commands received through a communication channel into mechanical motion.
                  • Medical

                  • Technosoft`s benchmark contributions with custom motion solutions are a part of leading medical applications such as:
                    • Clinical diagnosis
                    • Surgical instruments and robots
                    • Centrifugal pumps
                    • X-Ray Equipment
                    • Biomechatronics
                    • Ophthalmology equipment

                    When it comes to manufacturing components for the medical industry, a quality-controlled fabrication process is an absolute requirement for the series production and use of components. For this reason, our development team has focused intensively on expanding the process monitoring systems. Technosoft is certified according to ISO 9001:2008.
                  • Instrumentation & Optics

                  • Technosoft`s benchmark contributions with custom motion solutions are a part of leading instrumentation & optics applications such as:
                    • Digital microscopes
                    • Laser measuring systems
                    • Aerial view cameras
                    • Photometry
                    • Lens shaping and polishing
                    • Auto focus & auto zooming

                  • Robotics

                  • Motion control solutions for robotics
                    • Robots and cobots
                    • Exoskeletons
                    • Grippers
                    • Automated guided vehicles (AGVs)
                    • Warehouse automation
                  • Laboratory Automation

                  • Motion control solutions for laboratory automation
                    • Analysis equipment
                    • Pipetting
                    • Liquid handling systems
                  • Factory Automation

                  • Motion control solutions for factory automation
                    • Pick and place robots
                    • Cartesian robots
                    • Welding robots
                    • Printing equipment
                    • Bonding systems
                    • Laser marking
                    • Wafer inspection
                  • Semiconductor Equipment

                  • Motion control solutions for Semiconductor Equipment
                    • Flexible automation
                    • Atomic layer etching
                    • Trim and form
                    • Pick and place handler
                  • Packaging

                  • Motion control solutions for Packaging markets
                    • Bottling machines
                    • Labeling machines
                    • Gluing machines
                    • Package printing
                    • Material dosing
                  • Industrial Equipment

                  • Motion control solutions for
                    • Elevators
                    • Elevator doors
                    • Solar cells
                    • Hydraulic pumps
                    • Solar trackers
                    • Photo voltaic panels
                  • Textile

                  • Motion control solutions for Textile
                    • Weaving
                    • Warping
                    • Knitting
                    • Tufting
                    • Traverse control