SEKO’s range of base mounted solenoid driven dosing pumps features new revolutionary electronic stroke length regulation. The range offers both constant and manually adjustable, proportional flow rates, which can be based on either an external analogue or digital pulse signal.
Built using premium materials Maxima comes as standard with a pump head made of PVDF offering superior chemical compatibility for industrial, waste water treatment and potable water applications.
Advanced design and manufacturing processes means SEKO's diaphragms are made of pure PTFE, ensuring compatibility with most chemicals. This also provides a superior life expectancy, which SEKO guarantees for 5 years, reducing operating costs.
The use of ceramic balls as standard improves the reliability of the pump and the chemical compatibility of the wetted parts. Maxima is supplied with a Stabilized Multi Power Supply 100 - 240 Vac 50/60 Hz offering reduced energy consumption.
Designed around a single outer casing, Maxima offers 5 pumps with common fixing points, allowing any selection of pumps to be quickly incorporated into pre-assembled skids.
Tekba is a digital solenoid driven dosing pump with mechanical stroke length regulation. It represents the best compromise between reliability, dosing precision, and ease of use and has been designed following the positive customer feedback SEKO has received on the Tekna Series.
The Tekba Series offers a modern and reliable product, a reference point in the base mounted dosing pump sector. Tekba benefits from a standard PVDF pump head and ceramic ball valve, providing pump longevity and compatibility with all principal water treatment applications. Diaphragms made from PTFE offer a superior life expectancy, guaranteed by SEKO for 5 years, making routine replacement no longer necessary.
Tekba comes with a Stabilized Multi Power Supply 100 - 240 Vac 50/60 Hz offering reduced energy consumption. The solenoid only draws the required power to activate the pump, based on the working conditions which brings improved pump efficiency as performance is not affected by power supply fluctuations.
Manual adjustment via the control dial on the front panel which comes with indication of the percentage of frequency (P%) and the number of Stroke (F), with level probe input.
Automatic control (Digital pulse signal input), it comes equipped with a status indicator, level control input and 2 different modes of dosage:
Automatic control (External analogue pulse signal) comes equipped with a status indicator, level control input, 2 different modes of dosage:
Tekna Series is the range of innovative wall mounted solenoid driven dosing pumps that SEKO has designed following many years of experience working with its customers worldwide. These multifunctional solenoid driven dosing pumps maintain outstanding precision and reliability, critical to any customer, characteristics synonymous with the SEKO name.
Using only premium materials in its manufacture, Tekna's pump head comes as standard in PVDF and with a ceramic ball valve. These features assure high performance for the chosen applications and improve the reliability of the pump assuring the chemical
compatibility of the wetted parts.
SEKO’s diaphragms are solid PTFE offering superior life expectancy and are guaranteed by SEKO for 5 years, making routine replacement no longer necessary. Tekna features reduced energy consumption thanks to a Stabilized Multi Power Supply 100 - 240 Vac 50/60 Hz.
Tekna is also available in ATEX standard compliant versions. This pump offers digital dosing with a constant or proportional flow rate, that is manually adjustable from 0 - 100% and has a level control input. Tekna ATEX comes as standard with a pump head in AISI 316. Optionally available are heads in PVDF, outer casing made in aluminium and with a manual priming valve.
Special versions available include
AKE200 5 l/h @ 8 bar
AKL101 1 - 6 l/d
AKS604 10 l/h @ 5 bar
ATL400 STD version
ATL400 Air conditioning version
TPG300 0.5 l/h @ 5 bar
SEKO’s entry level offering in motor driven pumps is the Spring series. Three sizes of mechanism and a wide selection of models with varying performance profiles allow the user to find the appropriate solution for almost any application, offering accurate metering even under fluctuating pressure conditions.
The result of SEKO’s dedication to innovation and a passion for measurement solutions and systems to meet increasingly complex and large customers' technical requirements, Kontrol provides high levels of measuring accuracy and control with simple functionality. Kontrol - Single, double, multi parameter controllers.
The range enables the operator to monitor key values to suit almost any application covering the following parameters:
Invikta is a series of micro-processor based solenoid driven dosing pumps. While Invikta may be the entry level to SEKO’s range of solenoid driven dosing pumps, it still brings with it great reliability, quality construction and flexibility in the number of applications where it can work, such as: OEMs, Swimming Pools, Car Wash, Cooling Towers, Reverse Osmosis Systems and many other applications.
As with the rest of SEKO’s products Invikta, uses premium materials in its manufacture. The pump head is optionally available in PVDF and but the ball valves are ceramic as standard further enforcing the reliability of the pump and assures the chemical compatibility with all the wetted parts. SEKO’s diaphragms are made of pure solid PTFE offering a superior life expectancy guaranteed by SEKO for 5 years, making routine replacement no longer necessary, making this essential pump a great entry point into the SEKO range.
Kompact is a simple and reliable range of micro-processor based wall mounted solenoid driven dosing pump. The range has been designed to provide a general solution to the most commonly found daily needs. The range features both constant and proportional flow rates managed through a manually adjustable control dial on the front panel.
Kompact, even in its basic variant, uses premium materials in its manufacture. The pump head comes as standard in PVDF-T, but can be optionally specified in natural PVDF and comes with a ceramic ball valve as standard improving the reliability of the pump over time and offers chemical compatibility of the wetted parts. SEKO’s diaphragms are made of pure solid PTFE offering a superior life expectancy guaranteed by SEKO for 5 years, making routine replacement no longer necessary.
SEKO’s latest product in the pump sector is KOSMO. A range of full motion electric motor-driven pumps aimed at delivering exceptional performance across a wide range of flow and pressure environments.
As with other models in SEKO’s range Kosmo MM1 can be used across a broad range of applications. The pump can handle flow rates of up to 530 l/h at pressures of up to 12 bar and at a maximum working temperature of 40℃.
Kosmo MM2 features the same distinctive specs of MM1 series, while the range provides higher dosing performance for the most demanding application. Constructed in hard wearing metal with a cast aluminium housing, Kosmo MM2 can handle the largest output with flow rates of up to 2,300 l/h, at pressures up to 10 bar and at a maximum working temperature of 40℃.
Suitable for a wide range of applications within water treatment but also outside of this arena, Kosmo can effectively be used in any of the following applications: potable water treatment: (injection of coagulants, flocculating agents, sodium hypochlorite, lime slurry, acid, bases, caustic soda, activated carbon, etc,); domestic or industrial waste water treatment, boiler feed water, cooling water; chemical treatment, electrolytic (electro-plating) treatments: addition of degreasing agents, cleaning agents, nickel electroplating and chemical nickel plating, copper plating, tinning etc.
SEKO’s Kronos peristaltic range ideally showcases the company’s product offering to the Cleaning and Hygiene, Water Treatment and Industrial process markets. Features include Stepper motors, that offer the ultimate in dosing accuracy and versatility for use in a wide range of potential applications. The range also provides advanced solutions for the OEM market.
Kronos' superior design principles allied to the use of a high quality stepper motors along with innovative electronic control systems brings accuracy of dosing down to 0.01% of its maximum flow rate. The dosing function is particularly accurate and reliable over time, while the stepper motor offers an extended lifetime and a superior quietness in operation (<35dB).
Peristaltic dosing pumps
Ware Series is the latest range of detergent and rinse aid dosing systems for mechanical warewash from SEKO. Designed with an eye also to its look, the new Ware Series reflects SEKO's take on modern design ethos, while featuring our trademark ease of use and practicality.
Designed to cover all common types of mechanical warewash machines, from under counter and glasswashers through to to hood and flight/tunnel washers, Ware Series features 3 roller heads for prolonged tube life, reshaped roller heads without edges to further prevent tube wear and to facilitate tube replacement whilst reducing any risk of injury to the technician.
WareDose is the new range of compact dosing systems for dosing detergent and rinse aid combined into professional warewash machines. Its easy installation and intuitive programming makes these products the best solution for small and medium size warewash machines, like hood and conveyor machines.
The new professional, clean SEKO look has a polished white casing and easy to open front cover which allows tool free tube replacement as the cover locks in the open position. The casing features integrated front keys and a robust hinge allowing the box to be opened without tools and the hinge keeps the front cover open giving easy and safe access for installation.
OPL Basic features SEKO’s design know how for easy installation, straightforward operation and with a low maintenance requirement. All of this plus of course, a design that ensures user safety and equipment reliability. The OPL Basic Series offers a wide range of single and/or two product timed systems for liquid and dry product applications for machines up to 25kg.
SEKO’s Smart range of Laundry dosing systems combines technological development in peristaltic systems, where SEKO is a world leader, with guaranteed reliability for the chemicals dosed in commercial laundry machines, both OPL and Industrial ones. The range is designed to cover machines from 25kg up to 100kg.
Nyva is a series of hydraulic diaphragm metering pumps designed to meet API 675 standards and suitable for applications that require very high precision. The range offers a wide range of wetted parts available to suit various applications. Furthermore, being fully compliant with the ATEX European Directive means that these pumps can also be installed in hazardous areas.
The Drain Series systems automatically meter exact amounts of chemical anytime of the day or night as desired, minimises waste. Drain Mini offers the entry point to the family, is compact in size and offers essential features. The Drain Plus allows up to 48 daily operations to be pre set. The unit can be optionally equipped with an empty product alarm and comes with an installation kit suitable for most typical installations.
Provides very easy and accurate timed dosing solutions using a programmable clock to control the pump. TM digital makes it possible to setup to 17 dosing periods throughout the week. The programmer can start the pump (in manual mode) or disconnect the pump from the clock signals.
SEKO's range of air operated double diaphragm pumps offers versatility and reliability of operation for all applications. DuoTek Food pneumatic double diaphragm pumps, have been designed for use in the transfer of products used in the food industry.
The Duotek Food Series pump's double diaphragm manufactured with materials that conform to FDA (EC 1935/2004); the parts in contact with the liquid are polished by electrolysis and the SS316 and PTFE are both suitable for food use.
These pumps can convey very high liquids viscosity and at temperatures up to 95 °.
SEKO's Duotek AODD pumps come in many sizes and choices of materials of construction. Almost every type of liquid from highly corrosive acids through high viscosity paints and adhesives, to food and drink products can be pumped.
The range covers everything from FDA (EC 1935/2004) Compliant pumps to ATEX Zone 1 and 2 versions. The range is 100% wet tested after final assembly including deadheading, priming, and sealing.
Thanks to its seal-less design, SEKO AODD pump can dry-run without damaging the pump or system. The pump can be fully submerged according to fluid compatibility.
JetNeat is composed from a spray gun with a quick connector and a venturi with a chemical tank built-in which can be applied at the exit of it. Connected to the water tap by a flexible hose, the trigger gun is able to rinse thanks to a freshwater powerful jet. Once the venturi is quick applied at the outlet of the gun, the Jet Neat can produce a mixing solution that can be sprayed or foamed based on the model and chemical used.
ProWash is a chemical spraying system that constantly and automatically mixes the right quantity of chemicals to clean and / or sanitize large areas in commercial kitchens, supermarket preparation or food industry plants.
ProWash's simple and rugged and design is fully compliant with HACCP regulations, and as a system helps reduce water and chemical waste thus preserving the environment and reducing operational costs. Using materials known for their robustness and chemical compatibility, ProWash features high performance suction for optimal operation in all working conditions with a working temperature of up to 60° C.
Designed specifically for manual warewash detergents and sink sanitizers, but can also be used for janitorial and commercial applications ProDose R assures accurate dosing as each push of the large dispensing button yields the same volume output every time. Fast and easy installation that doesn't require a drill, when replacing existing pumps, as the hole patterns on the smart bracket match most existing models. Easy mounting and removing with the smart mounting bracket.
ProDose-R features enhancements including a flexible spout, larger diameter fittings for highly viscous liquids and an improved stroke regulation. Its colour coded cap can be easily removed to allow access to the dosage setting mechanism.
Accurate dilution at the push of a button
ProMax and its ProMax C variant, offer the most intuitive and cost effective dispensing system available in the market today. Available in either 1 or 4 product versions, it features revolutionary patented hydrodynamic technology that set new industry standards of performance and reliability.
ProMax's modular design gives great flexibility for maximum versatility for Kitchens to Laundry, Janitorial services to Commercial Cleaning. It efficiently fills small, medium and large containers with accurately diluted use solutions from chemical concentrates
It offers outstanding space for personalized branding or customized communication without costly printing minimums and set up charges. The ProMax C version is certified by all the leading European water authorities.
As operators and end user consumers, we expect that the places where we eat, sleep, drink are clean and hygienic. Even more so those places where our food and drink is prepared on a large-scale basis. The importance of having the right chemical applied at the right dilution, in this arena is critical, especially when cleaning isn’t always performed by skilled staff. So, solutions that are simple to use and reliable are critical.
ProTwin is a cleaning and sanitizing station that automatically mixes and dispenses concentrated chemicals. With a clean, professional appearance it comes with a built-in hose storage. A detachable foam wand extends usage options.
SEKO's proportional doser provides a simple and reliable system for measuring a precise a concentrated chemical that needs to be dosed into water ready for use. Installed directly to a water supply, the doser does not require electricity using the water pressure instead. As water flows, it creates a vacuum, drawing chemical at the desired, pre set dilution rate mixing the two inside its chamber.
Once set, the dispenser does not require any intervention or external control as the dosage of the injected product is constant, and is strictly proportional to the volume of water passing through the metering unit, whatever the pressure and flow variations that may occur. The high accuracy of the dosage eliminates any risk of overdose.
SekureDose is the ideal “turn-key” solution for filling spray bottles or buckets to wash floors, counter tops or other hard washable surfaces and for sink filling for pot and pan washing. SekureDose offers easy installation and comes with an easy to maintain manual pump mechanism built into a robust, easy to clean chemical cabinet. It offers the ideal solution for use in places like hotels, restaurants, schools and offices.. Offering the same security in use and in design as the SekureMax system, its flexible, modular design makes it the perfect choice for difficult to access spaces.
As with all SEKO equipment, it offers practically tool free installation – quick and simple using the SEKO wall bracket system, and with an easy to maintain manual pump mechanism, that’s built into the robust, easy to clean chemical cabinet. As with the SekureMax and ProMax systems, SekureDose offers outstanding space for personalized branding or customised communications for promotional or training or health and safety messages without costly printing minimums and set up charges.
SekureMax is an evolutionary chemical cabinet incorporating many innovative features designed to assist management of transport and storage costs. SekureMax has been designed to offer the best compromise between accessibility and its total footprint whilst remaining easy to clean. Designed to be used especially with SEKO's ProMax system, SekureMax offers a neat, professional solution to chemical storage for any of SEKO's dilution/dosing systems.
SekureMax incorporates many innovative features designed to assist management of transport and storage costs, while guaranteeing secure and precise dilution of cleaning or disinfectant chemicals. It has been designed to ensure the best compromise between accessibility and ease of cleaning. The large front allows space for customized communication to promote either a brand or health and safety or usage instructions.
SEKO's ProFoam is a chemical foam generator that offers automatic mixing of chemical with water generating a thick creamy foam and is designed to offer outstanding performance in the cleaning and disinfection of vertical or difficult access surfaces.
ProMulticlean was developed to generate a rich foam for maximum contact time, whilst also reducing water and chemical waste thus preserving the environment and optimising operational costs.ProMulticlean has a foam, rinse and spray function for 2 chemicals and is designed to meet HACCP requirements and can work at up to 50° C with a water pressures of 2 – 6 bar . A backflow device is optionally available
ProFill is a chemical dispensing system that mixes constantly and automatically the right amount of chemicals to refill your Scrubber Dryer Machine by using a delivery gun. It has been also designed to be HACCP compliant, with a smooth, ergonomic and robust outer case.
ProFill Premium is a chemical dispensing system that mixes constantly and automatically the right amount of chemicals to refill your Scrubber Dryer Machine by using a delivery gun.
Designed with the busy cleaning operator in mind it is focused on simplicity in use quick to connect and easy to install, while helping reduce operational costs.
ProFill Tower is a High Flow chemical dispensing system that mixed constantly and automatically the right amount of chemical to refill your Scrubber Dryer Machine. With a connection direct to the water source, it provides a gravity fed solution where no electric power or compressed air needed. It has a reduced maintenance requirement thanks to the blue venturi insert which avoids having to disassembled whole system.
It offers a smart solution to refill scrubber dryer machines thanks to the plastic ball valve and the 2" discharge hose supported by 15 different dilutions can be easily chosen, using the colour coded tips.
Designed to spray acid chemicals or aggressive detergents in several sectors : transport, industry, institutions, agriculture
SEKO’s ProKlyn spray system has SEKO’s traditional simple and rugged design, making it easily accessible and reliable. Conceived to clean and disinfect by spraying detergent and disinfectant solutions onto floors and other washable surfaces, ProKlyn also helps in reducing water and chemical waste, minimising operational costs.
ProKlyn's brass venturi external body provides greater resistance and robustness, while its inner venturi is made of PP for high chemical compatibility. It’s also extractable and interchangeable, making for easy quick maintenance. It’s high performance suction guarantees optimal operation in all working conditions.
A simple, sturdy and economical HACCP compliant spray system, ProKlyn is available in one or two products with optional BA disconnector:
Automotive pre-spray system designed for a single product spraying pre-wash shampoos or detergents on cars, trucks and other such vehicles. It has been designed to HACCP basic requirements for possible food applications including food truck washing. One or two product models are available.
Pressurized mobile system for spraying with 24 or 50 litre models available with optional air compressor.
Maximum working pressure is 8 bar and is also available in stainless steel or coated variants.
Side Channel blowers are the first choice in many automation projects for applications requiring large volumes of clean, dry air at low pressures and vacuums. SEKO has sought to deliver a product that offers easy installation as with our other products but also offers low operating noise levels in a small light weight design with operational energy saving in mind.
Performance advantages include a new variable frequency drive that allows maximum performance of a common motor driven unit to be improved by 300%. The precision machine tool cutting, ensures the accuracy and quality, of the blower. All products go through a strict mechanical and electrical performance test, using PROE, UG, CAD and other computer aided design software and motion simulations that test all the design features prior to final manufacture.