Videos
Loading the player ...
  • Offer Profile
  • Our activities are characterized by two essential features: the economic benefit for our customers and the sustainable use of our environment.

    JENZ is optimally positioned to allow you to use the energy potential of trendsetting raw materials with an increased value. We produce ecologically compatible, high-quality machines for the recycling of biomass serving a sustainable and resources-saving energy generation.
    An active process culture with the ability for continuous improvement indicates the basis for the strength of our company– based on employees showing high efforts and assuming full responsibility for every step and every action.

    And as the human being is our most precious asset, we challenge and support our employees within the scope of their abilities. We respect ethic principles and cultural differences and we condemn every type of racism and hostility to foreigners.
Product Portfolio
  • Mobile Chipper

      • Hybrid technology and truck

          • HEM 922 DQ-Truck hybrid

          • Application
            • shrubs and standing timber up to approx. 800 mm diameter
            • ideal machine for thick standing timber
            • chipping in continuous operation
            • large deployment radius

            Specifics
            • compact 4-axle HGV
            • hybrid technology for highest efficiency: chipper drive via high-powered add-on motor and blower drive via HGV motor
            • extremely high throughput rate large draw-in makes processing of bulky material and thick trunks easier extremely
            • large screen area for best chipping quality
            • enormous screen basket cover swivel capability for optimal accessibility of rotor and screen basket changing without tools
            • 80 km/h top speed

            Short Facts

            Performance
            • Max.diameter hardwood (in cm) 60
            • Max.diameter softwood (in cm) 80
            • Output approx. (in srm) 430

            Main drive
            • Diesel engine CAT C18; MAN, Euro 6c
            • Electric motor - (in kW/PS) 571/776 368/500

            Weight (without crane)
            • Weight basic model (in kg) 32000
            • Permitted total weight (in kg) 35000

            Measurements transport position
            • Length (in mm) 10130
            • Width (in mm) 2550
            • Height (in mm) 4000
          • HEM 922 DQ Cobra hybrid

          • Application
            • shrubs and standing timber up to approx. 800 mm diameter
            • ideal machine for thick standing timber
            • chipping in continuous operation
            • large deployment radius

            Specifics
            • pivoting driver's cab for best overview
            • compact 4-axle HGV 8x6-4 with self-steering axle for extreme off-road capability and high manoeuvrability
            • relocation of HGV on job site also possible with driver's cab pivoted and elevated and with full carrier vehicle towing power
            • Vario-flex control system for infinitely variable pre-selectable rotor speed
            • hybrid technology for highest efficiency: chipper drive via high-powered add-on motor and via HGV motor
            • large draw-in makes processing of bulky material and thick trunks easier
            • extremely high throughput rate
            • extremely large screen area for best chipping quality
            • less fines content in chippings and lower wear costs due to hydraulic blower
            • loading to the front over driver's cab possible
            • enormous screen basket cover swivel capability for optimal accessibility of rotor and screen basket changing without tools
            • 80 km/h top speed

            Short Facts

            Performance
            • Max.diameter hardwood (in cm) 60
            • Max.diameter softwood (in cm) 80
            • Output approx. (in srm) 430

            Main drive
            • Diesel engine CAT C18; MAN, Euro 6c
            • Electric motor - (in kW/PS) 571/776 368/500

            Weight (without crane)
            • Weight basic model (in kg) 32500
            • Permitted total weight (in kg) 35000

            Measurements transport position
            • Length (in mm) 10560
            • Width (in mm) 2550
            • Height (in mm) 3985
          • HEM 841 DQ-Truck hybrid

          • Application
            • shrubs and standing timber up to approx. 800 mm diameter
            • ideal machine for thick standing timber
            • chipping in continuous operation
            • large deployment radius

            Specifics
            • compact 4-axle HGV 8x6-4 with self-steering axle for extreme off-road capability and high manoeuvrability
            • Vario-flex control system for infinitely variable pre-selectable rotor speed
            • hybrid technology for highest efficiency: chipper drive via high-powered add-on motor and via HGV motorlarge draw-in makes processing of bulky material and thick trunks easier
            • extremely high throughput rate
            • extremely large screen area for best chipping quality
            • less fines content in chippings and lower wear costs due to hydraulic blower
            • loading to the front over driver's cab possible
            • enormous screen basket cover swivel capability for optimal accessibility of rotor and screen basket changing without tools
            • 80 km/h top speed

            Short Facts

            Performance
            • Max.diameter hardwood (in cm) 60
            • Max.diameter softwood (in cm) 80
            • Output approx. (in srm) 500

            Main drive
            • Diesel engine CAT C18; MAN, Euro 6c
            • Electric motor - (in kW/PS) 571/776 368/500

            Weight (without crane)
            • Weight basic model (in kg) 34000
            • Permitted axle load (in kg) 35000
            • Permitted total weight (in kg) 35000

            Measurements transport position
            • Length (in mm) 10610
            • Width (in mm) 2550
            • Height (in mm) 4000
        • Chippertruck

            • HEM 583 R-Truck

            • Application
              • shrubs and standing timber up to approx. 560 mm diameter
              • ideal for working in restricted spaces
              • large deployment radius

              Specifics
              • Unsurpassed driving comfort through automatic transmission
              • Driving forward without declutching due to chopping- optimized drive train
              • Innovative chipper operation through easy2 machine control
              • Overloading on both sides by centric blower
              • Because professionals pay attention to detail - user friendly options combined in an attractively priced additional package, including
              • Professional tool system
              • Professional light package "easyLight"
              • Camera system 2-fold support at the rear
              • Roof air conditioner
              • Combined cooler
              • CFA2
              • Ancestor system

              Short Facts

              Performance
              • Max.diameter hardwood (in cm) 45
              • Max.diameter softwood (in cm) 56
              • Output approx. (in srm) 240

              Main drive
              • Diesel engine MAN, Euro 6d
              • Electric motor - (in kW/PS) 375/510

              Weight (without crane)
              • Weight basic model (in kg) 25000
              • Permitted axle load (in kg) 25000
              • Permitted total weight (in kg) 25000

              Measurements transport position
              • Length (in mm) 7700
              • Width (in mm) 2550
              • Height (in mm) 4000
            • HEM 583 R Cobra

            • Application
              • shrubs and standing timber up to approx. 560 mm diameter
              • alternative to tractor with power takeoff shaft chipper
              • ideal machine for medium to large jobs
              • ideal for working in restricted spaces
              • large deployment radius

              Specifics
              • Unsurpassed driving comfort through automatic transmission
              • Driving forward without declutching due to chopping- optimized drive train
              • Innovative chipper operation through easy2 machine control
              • Overloading on both sides by centric blower
              • Because professionals pay attention to detail - user friendly options combined in an attractively priced additional package, including
              • Professional tool system
              • Professional light package "easyLight"
              • Camera system
              • Combined cooler
              • CFA2
              • Ancestor system

              Short Facts

              Performance
              • Max.diameter hardwood (in cm) 45
              • Max.diameter softwood (in cm) 56
              • Output approx. (in srm) 240

              Main drive
              • Diesel engine MAN, Euro 6d
              • Electric motor - (in kW/PS) 375/510

              Weight (without crane)
              • Weight basic model (in kg) 26500
              • Permitted axle load (in kg) 26500
              • Permitted total weight (in kg) 26500

              Measurements transport position
              • Length (in mm) 8044
              • Width (in mm) 2550
              • Height (in mm) 4000
            • HEM 593 R-Truck

            • Application
              • shrubs and standing timber up to approx. 560 mm diameter
              • ideal for working in restricted spaces
              • large deployment radius

              Specifics
              • Unsurpassed driving comfort through automatic transmission
              • Driving forward without declutching due to chopping- optimized drive train
              • Innovative chipper operation through easy2 machine control
              • Overloading on both sides by centric blower
              • Because professionals pay attention to detail - user friendly options combined in an attractively priced additional package, including
              • Professional tool system Professional light package "easyLight"
              • Camera system
              • 2-fold support at the rear Roof air conditioner
              • Combined cooler
              • CFA2 Ancestor system

              Short Facts

              Performance
              • Max.diameter hardwood (in cm) 45
              • Max.diameter softwood (in cm) 56
              • Output approx. (in srm) 270

              Main drive
              • Diesel engine MAN, Euro 6d
              • Electric motor - (in kW/PS) 375/510

              Weight (without crane)

              • Weight basic model (in kg) 25800
              • Permitted axle load (in kg) 25800
              • Permitted total weight (in kg) 25800

              Measurements transport position
              • Length (in mm) 7700
              • Width (in mm) 2550
              • Height (in mm) 4000
          • Biomass processor

              • Diesel motor and semi-trailer

                    • BA 965 DXL

                    • Application
                      • Machine for universal application
                      • extremely high throughput
                      • composting (grass cutting, bio-waste)
                      • trunk wood, roots, scrap wood
                      • substrate regrinding

                      Specifics
                      • very efficient machine
                      • Varioflex control for economic operation
                      • Easy system for simple tool change by just one person
                      • IPS Impact protection system long conveyor intake for continuous material flow
                      • transport with all semi-trailer tractors

                      Short Facts

                      Performance
                      • Green waste 330
                      • Bark 350
                      • Scrap wood 230
                      • Household waste 280

                      Main drive
                      • Diesel engine CAT-Motor
                      • Electric motor - (in kW/PS) 571 / 776

                      Weight

                      • Weight basic model (in kg) 26300
                      • Permitted axle load (in kg) 24000
                      • Permitted total weight (in kg) 10000
                      • Permitted total weight (in kg) 34000

                      Measurements transport position
                      • Length (in mm) 7700
                      • Width (in mm) 2550
                      • Height (in mm) 4000
                • Diesel motor 2-axes-chassis 1.31

                    • BA 615 D

                    • Application
                      • specialist for composting (grass cutting, bio-waste) and substrate regrinding in biogas plants
                      • shredding of scrap wood and roots possible depending on material constitution (not for permanent use)

                      Specifics
                      • Smallest and lightest JENZ biomass processor
                      • Low weight of less than 11.5 t
                      • Low insertion height for comfortable loading
                      • Easy system for simple tool change using only one person
                      • IPS impact protection and reversible fan for reduced maintenance

                      Short Facts

                      Performance
                      • Green waste 140
                      • Bark 180
                      • Scrap wood 120

                      Main drive
                      • Diesel engine CAT-Motor - C7.1 ACERT - EU V
                      • Power (in kW/PS) 225 / 306

                      Weight

                      • Weight basic model (in kg) 11500
                      • Permitted axle load (in kg) 14000
                      • Permitted total weight (in kg) 1000
                      • Permitted total weight (in kg) 15000

                      Measurements transport position
                      • Length (in mm) 9720
                      • Width (in mm) 2550
                      • Height (in mm) 3620
                    • BA 916 D

                    • Application
                      • specialist for composting (garden cuttings, organic waste) and substrate fine crushing in Biogas facilities
                      • shredding of scrap wood and roots possible depending on material constitution (not for permanent use)

                      Specifics
                      • outfeed belt can be swivelled to the side for considerably easier maintenance access
                      • low weight of less than 18 t
                      • Long, lowered belt hopper for simplified feeding
                      • aggressive upper draw-in roller for better draw-in behaviour
                      • extremly high throughput due to especially large Screen area
                      • NEW: innovative easy2 machine Control incl. unique Driver assistance systems
                      • NEW: Professional tool system
                      • NEW: High-speed draw-in

                      Short Facts

                      Performance
                      • Green waste 280
                      • Bark 280
                      • Scrap wood 170

                      Main drive
                      • Diesel engine Mercedes Benz OM 471 LA Abgasstufe V
                      • Power (in kW/PS) 390 / 530

                      Weight

                      • Weight basic model (in kg) 10280
                      • Permitted axle load (in kg) 18000
                      • Permitted total weight (in kg) 1000
                      • Permitted total weight (in kg) 19000

                      Measurements transport position
                      • Length (in mm) 9720
                      • Width (in mm) 2550
                      • Height (in mm) 3970
                  • Further products

                      • Turning and mixing machine & Regrinder

                            • NZ 1600

                            • Application
                              • regrinding scrap wood and other organic waste
                              • downstream machine for slow-running crushing units with high capacity

                              Specifics
                              • Driven by electronic engine
                              • material discharge via conveyor belt or outfeed auger
                              • large screening surface for best chip quality
                              • serial watering system avoids formation of dust
                              • individual installation in all plants
                              • also available as semi-mobile design (hook-lift) with diesel engine

                              Short Facts

                              Performance
                              • Scrap wood 25

                              Main drive
                              • Electric motor ✓
                              • Power (in kW/PS) 200 kW

                              Weight

                              • Weight basic model (in kg) 14000

                              Measurements transport position
                              • Length (in mm) 3400
                              • Width (in mm) 3500
                              • Height (in mm) 5150
                        • WoodCracker

                            • CL 190

                            • Application
                              • Fast harvest of small trees and bushes
                              • Small wood areas, rough terrain, hill areas, swamplands
                              • Harvest of short rotation plantations
                              • Landscape maintenance

                              Specifics
                              • optional cylinder swivel mechanism 2 x 48°
                              • optional autospeed
                              • Compact construction
                              • simple attachment to different excavators

                              short facts
                              • (in mm) 685
                              • (in kg) 210-310
                              • (in t) 2,5-7,5
                              • (in l/min) 50
                              • (in bar) 250
                            • CL 260

                            • Application
                              • Fast harvest of small trees and bushes
                              • Small wood areas, rough terrain, hill areas, swamplands
                              • Harvest of short rotation plantations
                              • Landscape maintenance

                              Specifics
                              • optional collective function
                              • optional cylinder swivel mechanism 2 x 48°
                              • Compact construction
                              • simple attachment to different excavators

                              short facts
                              • (in mm) 760
                              • (in kg) 350 - 630
                              • (in t) 6 - 14
                              • (in l/min) 100
                              • (in bar) 270
                            • C 250

                            • Application
                              • thinning
                              • landscape preservation
                              • felling of problematic trees
                              • harvest of fuel wood plantations
                              • to be used with base vehicles of up to 15 tons operating weight

                              Specifics
                              • optional collective function
                              • optional cylinder swivel mechanism 2 x 48°
                              • optional swiveling device Tiltator: endlessly rotatable
                              • replaceable cutting edge made of high-strength steel
                              • Compact construction
                              • simple attachment to different excavators

                              short facts
                              • (in mm) 760
                              • (in kg) 350 - 630
                              • (in t) 6 - 14
                              • (in l/min) 100
                              • (in bar) 270
                          • Technology and Innovation

                              • Professional Line Package

                              • "Chippertruck 2.1 -Professional Line" builds on absolute user-friendliness
                                Professional Line signifies an additional package. Basically, the idea is to set the machine up to make it as user-friendly as possible. In other words: The driver's everyday problems were analyzed and specific solutions developed.

                                The package is extensive and contains a range of different options. For example, the easyLight premium lighting package provides perfect lighting for the entire machine. We also added the professional tool system with its practical swivelling toolbox and ergonomic access together with the additional rear support. The cone splitter can also be ordered in addition to the professional line package depending on the machine type. This makes a combination of centric blower and add-on splitter possible as well.

                                A lot has happened to the controller as well. For example the package containsthe CFA2, which is the new draw-in regulator for our mobile chippers. Overallwe have carried out more than 30 major and minor modifications to the machine controller. For example, the machine can now start producing the first chippings less than 50 seconds after reaching the chipping location. That doesn't just make life easier for the driver, but it also increases the efficiency of the machine thanks to reduced setup time. The idea is to make the machine as efficient as possible durnig use. It shall be ready for action quickly, easy to operate and to maintain and, of course, flexible.
                              • GFA / CFA / CFA2

                              • GFA - system ("Grinder Feed Assistant")
                                In the biomass processor sector, the new GFA System(“Grinder Feed Assistant”) is now in use. In this case, sensors detect both the rotor speed and the drawin speed and match these two parameters optimally to the shredder operation. This enables the highest-possible throughput performances to be achieved when processing garden cuttings, organic waste and bark through a consistent high engine workload thanks to the new GFA system. Unproductive stopping of the draw-in can be almost completely avoided.

                                CFA - system ("Chipper Feed Assistant")
                                All JENZ chippers with easy2 controlling its are now fitted with the innovative CFA System (“Chipper Feed Assistant”). This system allows the draw-in speed to regulate itself via the rotor speed with the aim of optimum woodchipping quality. The drawin speed is adapted so that reversing is avoided, but the pre-grip remains almost constant despite this. If the rotor speed decreases, the draw-in speed decreases as well and the engine can remain continually at its maximum torque in ideal cases. Unnecessary reversing or stopping of the draw-in, which loads the drive engine, can be almost completely avoided and this leads to an evenly high and engine-caring workload.

                                CFA2 - system
                                The CFA system has been further developed to become the CFA2 System in order to relieve the load on the driver and maximise throughput. In this case to drawin speed does not regulate itself via the rotor speed but additionally via the top roller.
                              • easy2 controller

                              • The machine controller is the command centre of the machine, and therefore represents the interface between human and machine. The new easy2 controller is the successor of the previous easygreen controller. It consists of a touch display, the easy2TOUCH in addition to an additional operating element called the easy2SELECT Joystick. In the vehicle variation with the Cobra cabin version, the operating system has been extended with an additional operating console, the easy2CONTROL.

                                The easy2TOUCH display is the machine's command centre. Here, settings can be made by tapping the screen or using special pens/gloves. All functions which can be operated using the easy2TOUCH display can also be set using the easy2SELECT joystick. The operator can arrange settings to his requirements in a range of display menus. Limit values can be defined or special user profiles can be created in the configuration menus. Display menus enable representation of display instruments.

                                Furthermore, the easy2 controller contains fundamental new functions for the support of repeating operations. This includes the new setup/breakdown assistant with which the mobile chipper is ready for deployment even more quickly on site as well as the forward drive assistant which enables rapid relocation of the machine along the material.