Advantages:
Advantages:
The LGP 800's sensor is based on the principle of Tunable Diode Laser Spectroscopy (TDLS). This method determines the concentration from a measured absorption of the gas in question, for example methane. The source of the radiation is a laser diode, which is why TDLS is classed as a laser spectroscopy technique. The laser measuring cell thus measures methane exclusively. There is no interference from other gases. The LGP 800 is also optimised with regard to electricity usage. With a maximum power consumption of 20 A, the system can be operated from a standard car battery. This means that electric vehicles can also be used.
With three external outputs, a rotating warning light or a siren, for example, can also be connected via the SeCuRi® SAT software.The LaserGasPatroller is a vehicle-based solution for the economical network inspection of underground gas pipes. Gas leaks are detected when the laser-based measuring system LGP 800 is driven over the gas pipes. The LGP 800 is operated by the SeCuRi® SA software system. SeCuRi® SAT is the world's most sophisticated documentation system for pipe network inspection.
Principle
Natural gas (methane CH4) is a light gas which escapes from a leak in a gas pipe and diffuses through the soil to the road surface. As the LaserGasPatroller drives over the gas pipe, it draws in a sample, which is transferred to the LGP 800 measuring system and analysed. Leaks are detected and automatically recorded by the SeCuRi® SATsoftware.
Once you have worked with the EX-TEC® PM 400, you won’t want to put it down. The device with non-slip, rubberised housing fits securely in your hand. Thanks to the high-contrast screen with razor-sharp display, it is easy to read, even in bright sunlight. You can access all device functions via the handy 4-key control panel (2 arrow keys, menu key, Enter key). Another plus point for ease of use: the separate on/off key does not perform any other function.
With all extras fitted, the EX-TEC® PM 400 can detect up to four different types of gas. Optional sensors are fitted in the factory before delivery. A selection function allows you to specify the calibration for various flammable gases.
Advantages:
Features
The test sets to gas concentration measuring and gas warning devices of the EX-TEC PM 5xx/400 series.
The test sets ATS 503 and ATS 501 can be used to carry out device inspections and adjustments to gas concentration measuring devices EX-TEC® PM 580, 550, 500 and 400 reliably and extremely efficiently.
The ATS test set can be operated in three modes:
If the test set is operated in Automatic operating mode, all the device inspections that are due will be performed automatically as soon as a device is inserted into the test set that is switched on. Only the device condition subtest must be completed manually by the user. If the Timer operating mode is selected, the device inspections start at a freely adjustable time.
If a measuring device fails the device inspection, adjustment can also be carried out automatically from the test set in these two operating modes.
In the Manual operating mode, the user starts the device inspection by pressing the key. The device inspection can be performed in two variants for the gas warning range: using a test gas and time-saving bump test or with an indication accuracy test.
The SeCorrPhon AC 200 is a multifunctional leak detector offering three functions in one: prelocation, pinpointing and correlation. The clever combination of these processes in one system allows you to confidently locate the leak regardless of the ambient conditions. With just a few finger strokes, you can quickly and easily switch between the various applications.
The user interface of the SeCorrPhon AC 200 is clearly and logically laid out. There are many extra functions available for complex location scenarios.
The high quality piezo microphones with frequency response optimised especially for leak detection and the digital signal processing offer outstanding acoustic properties. Thanks to the excellent sound quality and minimisation of sound interference, you can reliably identify and locate leaks even if the sound intensity of the leak is weak or there is significant ambient noise.
At the touch of a button the SeCorrPhon AC 200 will apply tailored filters to the current noises and will automatically select the appropriate frequency ranges. Alternatively, you can set manual filter limits according to your individual hearing and select frequency ranges which accentuate the leak noise. This allows you to concentrate fully on the leak without any sound interference.
In addition, you have the option of recording leak noises with the integrated audio player and comparing them with each other. You can use these recordings for training or demonstration purposes or to create a noise database, allowing you to better evaluate leak noises on site.
All-in-one device: prelocation, pinpointing and correlation. The clever combination of these methods in one system allows you to confidently locate the exact source of the leak regardless of the ambient conditions.
The SeCorrPhon AC 200 is recommended for all users undertaking professional leak detection because it can handle any everyday location scenario. It can easily measure different pipe sections, pipe materials, diameters and pipe lengths.
With acoustic leak detection, the current sound intensity is displayed as a graph and as a numeric value on the large and clear 5.7 inch receiver display. Alongside, you can see the previous values for better comparison as well as the current frequency analysis of the noise.
The sophisticated firmware of the SeCorrPhon AC 200 means that the measurement sequence is almost fully automatic. Once the pipeline data has been entered and the measurement started, all other steps are performed without the intervention of the operator. The measured noises are constantly analysed in the background and the optimal filter settings selected.
The SeCorrPhon AC 200 guides the user through the various applications with instructions. This means that even users with less experience and occasional users can use the device with confidence.
The SeCorrPhon AC 200 independently optimises the measuring results by automatically selecting appropriate filters – without the user having to intervene. However, the filters can also be set manually.
One special feature of the correlator is its results-oriented, user-friendly on-screen display of the measuring results. Concrete information about the position of the leak is highlighted, instead of having to interpret complex curves. The quality of the calculations shown in the display provides the user with constant information about how reliable the measurement is. Thanks to the results-oriented view, the user can immediately implement further steps, e.g. confirm the location by acoustic means.
Flexible use
Thanks to the high protection class (IP67) of the AQUAPHON® A 200 receiver, you’ll always be on the safe side, even in extreme environmental conditions. The receiver is impervious to dirt, dust and moisture. The TM 200 touch microphone used for prelocation can even be used continuously under water (IP68).
The symmetrical housing of the AQUAPHON® A 200 receiver, means that it can be operated by both right-handed and left-handed users with ease.
You can see everything at a glance: The clear 5.7 inch receiver display shows the current acoustic intensity both in a graph and as a numeric value. Alongside, you can see the previous values for comparison purposes, as well as the current frequency analysis of the noise.
A full charge of the integrated Li-Ion rechargeable battery in the AQUAPHON® A 200 receiver, F6 wireless headphones and TS 200 carrying rod is enough for a full day’s work.
Work effortlessly and ergonomically. The TS 200 carrying rod with its balanced, ergonomic design fits snugly into your hand. The flexible carrying system for the receiver with two cross belts can be adjusted individually and enables various carrying positions.
AQUAPHON® is a first-class water leak detection system. Professional prelocation and the precise pinpointing of leaks is ensured by the A 150 receiver together with the well-established microphone technology from the AQUAPHON® A 200 system, which has proved its worth countless times. Connected via high-end microphones and wireless headphones, this device impresses with its brilliant reproduction quality. The display offers support by visualising the noise for reliable and differentiated evaluation.
Small, light and handy, – the receiver wins over customers with its clever, compact design and maximum comfort when carrying. Thanks to adjustable filters and automatic frequency scanning, frequency ranges can be individually adapted to the user's hearing, influences from sound interference minimised and sound quality optimised for reliable evaluation of the leakage situation.
This complete package solution based on the AQUAPHON® and FERROPHON® series offers the detection professional a range of possibilities for precisely pinpointing pipelines and leaks in buildings. The package includes an AQUAPHON® AF 50 receiver and FERROPHON® FG 50 generator. A sturdy case offers sufficient space to safely store the system components and can even be used to charge an FG 50 generator, an AF 50 receiver and headphones at the same time.
In addition to a version with cable headphones, the SDR version with wireless headphones is available. Sewerin Digital Radio (SDR) offers sound transmission of the same quality as with a cable connection. Eliminating the cable increases working comfort significantly. The headphones and the device are automatically connected by bidirectional radio when switched on.
FeaturesThe SeCorrPhon AC 200 is a multifunctional leak detector offering three functions in one: prelocation, pinpointing and correlation. The clever combination of these processes in one system allows you to confidently locate the leak regardless of the ambient conditions. With just a few finger strokes, you can quickly and easily switch between the various applications.
Professional
The user interface of the SeCorrPhon AC 200 is clearly and logically laid out. There are many extra functions available for complex location scenarios.
The high quality piezo microphones with frequency response optimised especially for leak detection and the digital signal processing offer outstanding acoustic properties. Thanks to the excellent sound quality and minimisation of sound interference, you can reliably identify and locate leaks even if the sound intensity of the leak is weak or there is significant ambient noise.
At the touch of a button the SeCorrPhon AC 200 will apply tailored filters to the current noises and will automatically select the appropriate frequency ranges. Alternatively, you can set manual filter limits according to your individual hearing and select frequency ranges which accentuate the leak noise. This allows you to concentrate fully on the leak without any sound interference.
In addition, you have the option of recording leak noises with the integrated audio player and comparing them with each other. You can use these recordings for training or demonstration purposes or to create a noise database, allowing you to better evaluate leak noises on site.
Flexible
All-in-one device: prelocation, pinpointing and correlation. The clever combination of these methods in one system allows you to confidently locate the exact source of the leak regardless of the ambient conditions.
The SeCorrPhon AC 200 is recommended for all users undertaking professional leak detection because it can handle any everyday location scenario. It can easily measure different pipe sections, pipe materials, diameters and pipe lengths.
With acoustic leak detection, the current sound intensity is displayed as a graph and as a numeric value on the large and clear 5.7 inch receiver display. Alongside, you can see the previous values for better comparison as well as the current frequency analysis of the noise.
Intelligent
The sophisticated firmware of the SeCorrPhon AC 200 means that the measurement sequence is almost fully automatic. Once the pipeline data has been entered and the measurement started, all other steps are performed without the intervention of the operator. The measured noises are constantly analysed in the background and the optimal filter settings selected.
The SeCorrPhon AC 200 guides the user through the various applications with instructions. This means that even users with less experience and occasional users can use the device with confidence.
The SeCorrPhon AC 200 independently optimises the measuring results by automatically selecting appropriate filters – without the user having to intervene. However, the filters can also be set manually.
One special feature of the correlator is its results-oriented, user-friendly on-screen display of the measuring results. Concrete information about the position of the leak is highlighted, instead of having to interpret complex curves. The quality of the calculations shown in the display provides the user with constant information about how reliable the measurement is. Thanks to the results-oriented view, the user can immediately implement further steps, e.g. confirm the location by acoustic means.
Reliably and accurately pinpoint leaks
Professional: The SeCorr® C 200 is a state-of-the-art, portable high-performance correlator, which enables leaks in underground pipelines to be located reliably, quickly and accurately to allow excavation to begin. Its user interface is clearly and logically laid out. There are many extra functions available for complex location scenarios.
Flexible: The SeCorr® C 200 is recommended for all users undertaking professional leak detection because it can handle any everyday location scenario. It can easily measure different pipe sections, pipe materials, diameters and pipe lengths.
Intelligent: The sophisticated firmware of the SeCorr® C 200 means that the measurement sequence is almost fully automatic. Once the pipeline data has been entered and the measurement started, all other steps are performed without the intervention of the operator. The measured noises are constantly analysed in the background and the optimal filter settings selected.
A new dimension in pipe location
Locating underground pipelines and cables is a matter of precision. The more accurate the measurement, the lower the risk of digging up the wrong spot. Performance, practical handling and simple operation are just as important for fast and efficient work. Likewise, reliability, versatility and a sturdy design are also essential for obtaining measuring safely in difficult conditions and inaccessible environments. The UT 9200, UT 9100 and UT 930 systems are up to any locating task.
The unique UtiliTrac system sets new standards in locating underground pipelines.
Its balanced design and intuitive single button operation ensure comfortable and effortless work over longer periods of time.
The UtiliTrac can be folded to the length of your forearm and transported in the system case. This case also holds the generator. Weighing less than 7 kg in total, the UtiliTrac is ideal for field use.