Navigation : EXPO21XX > AUTOMATION 21XX > H11: Assembling Units > AUBO Robotics
Loading the player ...
  • Offer Profile
  • AUBO Robotics is dedicated to creating collaborative robots that are advanced human friendly robotic solutions to serve the small to midsize manufacturing sector. Our goal is to provide our clients with a robot designed to interact with a human worker within a defined workspace, user-friendly, and a cost-effective robotic system that is easy to implement.
Product Portfolio

      • Collaborative Robots

      • AUBO Robotics manufactures a lightweight intelligent collaborative six degree of freedom robot, the AUBO-i5. This robot arm was specially designed with important functions from the start, combining state of the art technology with user friendliness to make this a collaborative robot (Co-bot) for any application. Robotic automation is no longer out of range for small to midsize companies.
            • AUBO-i5

            • AUBO Robotics AUBO-i5 is a Collaborative operation industrial robot with certified safety functions, hand guide operation, and power and force limiting design type robot.


              • Weight 24 Kg
              • Footprint 172 mm diameter
              • Repeatability (+/- 0.05 mm)
              • Linear Velocity 2.8 m/s adjustable
              • Power Consumption 200 watts typical application
              • Materials Aluminum, Steel, Plastic
              • Ambient Humidity Normal 75% RH or less without frost
              • or dew, 85% RH short term
              • Ambient Temperature 0 to 45 degrees Celsius
              • IP Classification of Robot IP54
              • Programing Teach pendant with user interface, guide to teach,
              • ROS compatibility through an API
              • Communication CAN bus
              • Motor Type Harmonic drive 48 Volt
              • Installation Orientation Any Ceiling, Floor, Wall
        • Autonomous Mobile Robots

              • AUBO-JR2

              • Technical specifications

                • Dimensions 800X550X420mm
                • Weight 125 Kg
                • Payload 100 Kg
                • Speed 3 m/s
                • Enclosure class IP 54
                • Autonomy 8 h
                • Batteries LiFePO4 15Ah@48V
                • Traction motors 4x500W
                • Temperature range 0º to 45º C
                • Range Finders 10m / 20m (Optional)

                • Arm AUBO-I5
                • Weigth 24 Kg
                • Payload 5 Kg
                • Reach 924,5 mm

                • Gripper (Optional) WSG-50
                • Weight 1,15 Kg
                • Repeatability +-0,03
                • Stroke per finger 55 mm
          • Modular Robotic Joints

          • AUBO Robotics MRJ are independent modular joints and designed to work by them self or link them together.

            Open source modular joints, developed for academic teaching and scientific research providing a broad open source platform to help robot users quickly develop high-performance robots.

            The MRJ integrates the motor, harmonic drive, sensor, brake, and an optional encoder.
                • AUBO-MRJ Serials

                • Technical specifications MRJ060A-I - MRJ090A-II

                  • Diameter 60 mm - 90 mm
                  • Heigh 72.4 mm - 96.1 mm
                  • Weight 471 g - 1393 g
                  • Repeatability ± 0.5°

                  MRJ is a Joint Module which integrates BLDC, Motor Driver, Harmonic Drive, Sensors, Brake (Optional) and Encoder

            • Robotics Accessories

            • AUBO Robotics list of some approved peripheral robotics accessories that can help you make your robot more productive. Some Items are sold directly by AUBO while some are third party items and will be sold and serviced by other manufacturers. These items include simulation software tool for process simulation and optimization of automated offline planning and programming of robots. Software used for off-line programming (OLP), motion planning and support for bin-picking available. Force torque sensors to give an industrial robot a sense of touch, robotic vision camera, electric grippers, robotic tool changers, and more.
                • Software

                  • – Simulation Software AUTOMAPPPS offline is SW-tool for faster, easier robot offline programming. Automated collision avoidance, automated planning, WYSIWYG simulation and further support features speed up and facilitate robot programming.
                  • RobotLinker – Cloud-Computing, Internet-of-Things and Artificial Intelligence. An Innovative Connectivity Service and Disruptive Software Solution Provider for Robot Industry.
                  • SprutCAM – A single environment for the offline programming (OLP) of industrial robots. A single environment for the offline programming (OLP) of industrial robots. An efficient robot machining solution for the rapid creation of complex collision-free 3D movements in native 6 or more axes code (5 to 6 axis transformations are not required).
                • Vision

                  • Cognex- In-Sight 7000 – In-Sight 7000 is a full-featured, powerful vision system that performs fast, accurate inspections of a wide range of parts across all industries.
                  • Pickit- Pick-it is a smart automation product that guides your robot to pick and place a wide range of products in different applications. See Link for plug-in.
                  • Sick- Inspector PIM60 – Inspector is an intelligent vision solution in an easy-to-use sensor package.
                • Hardware

                  • ATI- Axia80 – Force/Torque Sensors : A low-cost six-axis sensor that maintains the quality and accuracy in all of ATI’s Force/Torque Sensor products.
                  • OptoForce – Force Torque Sensors
                  • Robotiq: – Electric Adaptive two jaw Grippers, Force Torque Sensor
                  • Vention: – Custom robot pedestals – “kit ready-to-assemble”
                  • RoboWorld: Protective robot covers – “For extreme environments” Part # 498-16097
                  • Murr Plastik: – Dress Kit – “kit ready-to-assemble” 1x FHS-Set AR5 83693482 and 1x FHS-SH 550 83693427