Videos
Loading the player ...
  • Offer Profile
  • PIONEER IN CUSTOMER-ORIENTED PRODUCT DEVELOPMENT Sampo Rosenlew Ltd has been operating on the same plot at the heart of Pori for over 150 years. The roots of its industrial operations go back to 1853 when the family company Oy W. Rosenlew Ab was founded. Sampo Rosenlew was founded in 1991.

    Today the company is known worldwide for its high-quality combine harvesters and forestry machines.

    The manufacture of combine harvesters began in 1957. The company has delivered more than 50,000 combine harvesters to approximately 50 countries during 60 years. Its key market areas are the Nordic countries, Europe, North Africa and the CIS countries. More than 90 per cent of its products are exported.

Product Portfolio
  • Combine Harvesters

      • Comia

          • Comia C6

          • The Comia C6 is equipped with the same nice features in the cab as the other models in the series.
            The C6 has been equipped with a HD threshing cylinder, which rotates steadily in every situation. The threshing cylinder has eight rasp bars and the cylinder flanges are made of cast iron. Any possible peak loads easily go unnoticed in this efficient one-cylinder machine. The engine is a powerful, four-cylinder, 185 HP, Tier 5 engine. The grain tank has a capacity of 4,400 litres and the unloading height is 4 metres. Standard header size is 4.2 metres, but the combine can be equipped with cutting widths between 3.9 and 4.5 metres.
            • Cutting header
              4,2 m
            • Grain tank
              4 400 l
            • Engine
              4-cylinder 185 hp AGCO POWER Tier5
            • Air conditioning
              Standard
            • Threshing cylinder
              8-rasp bar HD
            • Unloading speed
              75 l/s
            • Straw walkers
              5 walkers
            • Straw chopper
              3 300 rpm
            • Front tires
              600/65R34
            • Rear tires
              420/65R20
          • COMIA C8

          • The C8 is super-efficient, thanks to its TS double cylinder system and large grain tank. The AVARA cab is filled with features that add to comfort.
            The COMIA C8 with its two threshing cylinders efficiently threshes any kind of grain. When compared to a single cylinder combine, the threshing efficiency is increased by more than 20%. The engine is a powerful six-cylinder, 210 HP, Tier 5 engine. The grain tank capacity is 5,400 liters to correlate with the harvester’s efficiency. Standard cutting header width is 4.5 metres, but the cutting width can be chosen between 4.2 and 4.8 metres.

            Double-cylinder systems have been used in SAMPO combine harvesters since 1996. The patented TS-system significantly increases threshing efficiency in Northern European conditions. The pre-threshing cylinder evens out the material flow and smoothens it before the threshing cylinder, where the threshing mainly takes place. Threshing efficiency is increased as the straw walkers have less work to do.
            • Cutting header
              4,5 m
            • Grain tank
              5 400 l
            • Engine
              6-cylinder 210 hp AGCO POWER Tier5
            • Air conditioning
              Yes
            • Pre-cylinder
              Yes
            • Threshing cylinder
              8-rasp bar HD
            • Unloading speed
              75 l/s
            • Straw walkers
              5 pcs
            • Straw chopper
              3 300 rpm
            • Front tires
              600/65R34
            • Takarenkaat
              420/65R20
          • COMIA C10

          • The quietest cab in its size class on the market. High-power straw chopper and cutting table side tilt as standard. These are just a few of the benefits the C10 offers.
            The C10 is equipped with one threshing cylinder and is the “first” harvester of the larger COMIA series. The efficient and steadily rotating HD threshing cylinder, with eight rasp bars, has been equipped with metal bars that are covered on the back. This ensures that dirt won’t get caught behind the rasp bar, and it simultaneously increases the efficiency of the flywheel effect. Large separation areas on the sieves and straw walkers make this model extremely efficient. The AVARA cab is excellently equipped and includes e.g., direct height control (DHC) for the header and electrically adjustable mirrors. Efficiency is further increased by the large grain tank, fast unloading speed and the unloading pipe with a high unloading height.
            • Cutting header
              5,1 m
            • Grain tank
              6000 l
            • Engine
              6-cylinder 238 hv AGCO POWER Tier5
            • Air conditioning
              Yes
            • Threshing cylinder
              8- rasp bar HD
            • Unloading speed
              100 l/s
            • Straw walkers
              6 pcs
            • Straw chopper
              3 800 rpm
            • Front tires
              650/65R38
            • Rear tires
              480/65R24
          • COMIA C12

          • The largest and most efficient straw walker harvester of our range is suitable for large areas. The C12, which is up to 20% more efficient than a single cylinder harvester, can handle anything.
            The C12 with its TS front cylinder system is the largest straw walker harvester of the COMIA series. The harvester has large separating surfaces and six straw walkers. Efficiency is guaranteed with a large grain tank of 7,600 litres and quick unloading at the speed of 100 l/s.

            The modern AVARA cab finishes off this harvester and ensures comfort during a long day of threshing. The cab is quiet and its features and controls are in a class of their own.
            • Cutting header
              5,7 m
            • Grain tank
              7 600 l
            • Engine
              6-cylinder 300 hp AGCO POWER Tier5
            • Air conditioning
              Yes
            • Pre-threshing cylinder
              Yes
            • Threshing cylinder
              8-rasp bar HD
            • Unloading speed
              100 l/s
            • Straw walkers
              6 pcs
            • Straw chopper
              3800 rpm
            • Front tires
              650/65R38
            • Rear tires
              480/65R24
          • COMIA C22 2ROTO

          • A SAMPO ROSENLEW hybrid model, in which straw walkers have been replaced with two rotors. Over 30% more threshing efficiency when compared to the C12 model.
            Combining the best elements of known threshing technology’s, the harvester will be called a Hybrid. The C22 2ROTO, is equipped with a TS front cylinder system and two rotors, is the most efficient harvester of the COMIA range. The harvester, has large separator surfaces, has two opposite spinning rotors that make the harvester more than 30% more capacity than a similar-sized straw walker machine. Threshing is achieved in the traditional way, but the rotors add separation capacity.

            The modern AVARA cab finishes off this harvester and ensures comfort during a long day of threshing. The cab is quiet and its features and controls are in a class of their own.
            • Cutting header
              6,9 m
            • Grain tank
              7 600 l
            • Engine
              6-cylinder 300 hv AGCO POWER Tier5
            • Air conditioning
              Yes
            • Pre-threshing cylinder
              Yes
            • Threshing cylinder
              8-rasp bar HD
            • Unloading speed
              100 l/s
            • Separation rotaries
              2 pcs
            • Straw chopper
              3800 rpm
            • Front tires
              800/65R32
            • Rear tires
              480/65R24
        • Verrato

              • Verrato V4

              • A good, basic and cost-effective alternative for farm work. A strong combine harvester with a frame and with tested technology.
                Verrato is an excellent choice, if you are looking for a cost-effective alternative for farm work. A strong combine harvester a with frame and with tested technology.

                The combine has been equipped with an eight-rasp-bar HD-threshing cylinder and four walkers. The 4-cylinder, 150 HP engine is very powerful and the transmission is hydrostatic. In the machine equipped with a SR-STD+ cab, you can mechanically engage the cutting header, thresher and the emptying of the grain tank.
                • Cutting header
                  3,9m
                • Grain tank
                  3 700 l
                • Engine
                  4 -cylinder 150 hv AGCOPower Tier5
                • Air conditioning
                  Not standard
                • Threshing cylinder
                  8-rasp bar HD
                • Unloading speed
                  55 l/s
                • Straw walkers
                  4 pcs
                • Straw chopper
                  3 300 rpm
                • Front tires
                  460/85R34
                • Rear tires 360/70R20
          • Series 2000

              • SR2000-series

              • The 2000-series has served farmers ́ needs indefatigably for more than a three decades. It can harvest any crop with the right setting, a true all-rounder.
                The 2000-series has served farmers ́ needs indefatigably for more than a three decades. The range has been sold throughout the world and threshed the most exotic species of plants. The feedback received from round the world has helped us develop our combines more versatile and reliable than ever. A host of appreciated properties are combined in this combine harvester – a wide cutting table and threshing unit, a good selection of different engines and a large grain tank.
                • Cutting header
                  3,45 -5,1 m
                • Grain tank
                  3300 - 4200 l
                • Engine
                  122-185 hp AGCO POWER engine
                • Air conditioning
                  No
                • Threshing cylinder
                  8-rasp bar HD
                • Unloading speed
                  55 l/s
                • Straw walkers
                  4-5 pcs
                • Straw chopper
                  available
                • Front tires
                  460/85R34
                • Rear tires
                  360/70R20
              • SR2010

              • The Sampo Rosenlew 2010 is specially designed for experimental fields and seed breeding.
                The Sampo Rosenlew 2010 is specially designed for experimental fields and seed breeding. With this in mind Sampo Rosenlew’s engineers have perfected every detail in the SR 2010 combine. The single most important factor in plot harvestingis to ensure that all the grains come from the intended plot.
                • Cutting header
                  1,5m, 2,0m, 2,3m
                • Grain tank
                  1700 l
                • Engine
                  73 hp VM Motori engine
                • Air conditioning
                  No
                • Threshing cylinder
                  7-rasp bar HD sealed
                • Straw walkers
                  3 pcs
                • Straw chopper
                  available
                • Front tires
                  12.4R24
                • Rear tires
                  11.5-15
            • Forest Machines

                • HR46x

                • The HR46x is the most reliable, environmentally-friendly and economical harvester for first thinning of young forests all around the world.
                  The HR46x was originally designed for the first thinning of young forests. The nearly 25-year-old machine concept has of course gone through a huge number of developments and has been improved in cooperation with clients. It still, however, follows and respects the original idea behind the machine. The HR46x is the most reliable, environmentally-friendly and economical harvester for first thinning of young forests all around the world.
                  • Typical weight
                    8000-9 500 kg
                  • Crane reach
                    7,1 m
                  • Crane lifting torque
                    55 kNm
                  • Engine
                    124 kW
                • HR86

                • For thinning old forests and final cutting, a midsized harvester. With high-quality and cost-effective, for professionals
                  The starting point of the design of the completely new machine type, the HR86 harvester, was to offer forestry professionals a machine for high-quality and cost-effective later thinning and final cutting done in varying and even demanding conditions. In our opinion, we have succeeded in this.
                  • Weight
                    21000 kg
                  • Crane reach
                    10,3 - 11,1 m
                  • Engine
                    195 kW
                • FR28

                • FR28 lightness, the large turning angle and many other features make it a technically and economically superior choice for thinning and harvesting on soft ground.
                  The FR28 forwarder is a special machine for thinning and for soft harvesting conditions. With its 10-tonne payload, it is well suited to be partnered with the SAMPO-ROSENLEW HR46x harvester. Its lightness, the large turning angle and many other features make it a technically and economically superior choice for thinning and harvesting on soft ground.
                  • Minimum weight
                    13 000 kg
                  • Load capacity
                    10 tn
                  • Crane reach
                    7,2 - 10m
                  • Engine
                    140 kW
                • FR48

                • The popularity of the FR28 forwarder quickly led to inquiries after a slightly larger machine. And so the FR48 forwarder was born. This FR28’s big brother has a payload of 12 ton.
                  The popularity of the FR28 forwarder quickly led to inquiries after a slightly larger machine. The clients wanted a machine they could use for later thinning that could also be used for regeneration felling.

                  And so the FR48 forwarder was born. This FR28’s big brother has a payload of 12 ton. The main concept is built around tried and tested solutions. The motor is the same Agco Power 49 LFTN diesel with 140 kW maximum power, the cab is the same; practically the whole front end of the machine is the same with the exceptions of the axles.
                  • Minimum weight
                    16 500 kg
                  • Load capacity
                    12 tn
                  • Crane reach
                    7,2 - 10m
                  • Engine
                    140 kW
                • FR68

                • The FR68 forwarder is a completely new machine model. The machine is meant for later thinnings and final cutting, where great capacity is required from the machine.
                  The FR68 forwarder is a completely new machine model. The machine is meant for later thinnings and final cutting, where great capacity is required from the machine. The nominal load capacity of the machine is 14 ton. The load space is easily modified, which makes the machine more usable in different conditions and with different load lengths. The FR68 has been designed to work alongside the SAMPO ROSENLEW FR68 harvester. Together they form a highly efficient and modern felling chain.
                  • Minimum weight
                    18 000 kg
                  • Load capacity
                    14 tn
                  • Crane reach
                    8 - 10m
                  • Engine
                    170 kW