FELLA
Videos
Loading the player ...
- Offer Profile
- The name FELLA has been a byword for innovative agricultural machinery from Franconia for over 90 years. FELLA-Werke GmbH of Feucht near Nuremberg currently holds a top position in the demanding crop harvesting machinery sector. With a comprehensive range of drum and disc mower units, tedders and rakes, FELLA is in an excellent position to enjoy sustainable growth on the world market.
Product Portfolio
Drum mowers
- Powerful, robust and reliable: RADON drum mowers are outstandingly suitable for the efficient recovery of high-quality forage, even under the most difficult of conditions. A precise cut and a high forage flow rate ensure that forage is optimally deposited in a loose yet compact swath. Even with large volumes of forage, RADON drum mowers can mow quickly without blockages. These mowers are available in a rear- or front-mounted attachment version.
Front-mounted oscillating linkage
-
Working width: 2.55 m – 3.26 m
Optimum ground adaptation by mounting the mower unit at the centre of gravity
Smooth running thanks to Gleason spiral toothing
Built for the toughest of applications with a power train supported at numerous points 
RADON 270 FP
-
Working width approx.: 2.55 m
1. Neat swath positioning between the tractor wheels thanks to a standard swath guiding assembly.
2. The compact attachment to the tractor with suspension mounting on the tractor side provides load relief for the tractor and machine.
Optimum ground adaptation by mounting the mower unit at the centre of gravity
Smooth running thanks to Gleason spiral toothing
Built for the toughest of applications with a power train supported at numerous points
RADON 2940 FP-V - 3340 FP-V
-
Working width approx.: 2.86 m – 3.26 m
1. Excellent accessibility for cleaning and maintenance work through a wide opening protective cover.
2. Easy adjustment to different working conditions thanks to cutting-height adjustment and central adjustment of the swath discs
Optimum ground adaptation by mounting the mower unit at the centre of gravity
Smooth running thanks to Gleason spiral toothing
Built for the toughest of applications with a power train supported at numerous points
Front-mounted headstock with trailing linkage
-
Working width: 3.06 m
Extremely low-drag thanks to towing point positioned well towards the front
Optimum ground adaptation thanks to large pendulum travel
Built for the toughest of applications with a power train supported at numerous points RADON 310 FZ
-
Working width approx.: 3.06 m
1. Minimal impact on the ground and economical on fuel thanks to the towing point in front of the mower unit. "Pulling is easier than pushing"
2. The overhead frame allows the mower unit great pivot travel and optimal ground adaptation.
Extremely low-drag thanks to towing point positioned well towards the front
Optimum ground adaptation thanks to large pivot travel
Built for the toughest of applications with a power train supported at numerous points
Rear-mounted side attachment
-
Working width: 1.85 m – 2.20 m
Adjustable contact pressure with spring relief
Easy handling and foldable protective sheets for good accessibility
Built for the toughest of applications with a power train supported at numerous points RADON 187 - 225
-
Working width approx.: 1.85 m – 2.20 m
1. Robust drum mower without the necessary hydraulic outlets, with four mowing drums which run in pairs and neat swath positioning.
2. Side-attached mower unit with warp-resistant frame for a long service life.
Adjustable contact pressure with spring relief
Easy handling and foldable protective sheets for good accessibility
Built for the toughest of applications with a power train supported at numerous points
Rear-mounted middle attachment
-
Working width: 3.06 m
Excellent ground adaptation thanks to middle hitch attachment
Floating cut thanks to the TurboLift system
Built for the toughest of applications with a power train supported at numerous points RADON 310 TL
-
Working width approx.: 3.06 m
1. With the hydropneumatic cutter bar relief system TurboLift System (TL) the contact pressure can be adjusted infinitely variably and adapted to different usage conditions.
2. The mower unit mounted at the centre of gravity ensures excellent ground adaptation.
Excellent ground adaptation thanks to middle hitch attachment
Floating cut thanks to the TurboLift system
Built for the toughest of applications with a power train supported at numerous points
Disc mowers
- Professional, powerful and cost-effective – these are the distinguishing features of RAMOS disc mowers from FELLA. They are ideal for use in all regions and in all harvesting conditions. The recovery of high-quality and clean forage is ensured by the precise cut. A durable design goes without saying in just the same way as the low maintenance requirements.
Front-mounted compact linkage
-
Working width: 2.05 m – 2.50 m
Specialists for alpine terrain
Short, compact attachment to the tractor
Lightweight construction RAMOS 260 FK - 210 FK-S
-
Working width approx.: 2.05 m – 2.50 m
1. Rigid headstock with short, compact attachment and a centre of gravity near to the tractor for optimum efficiency on slopes.
2. The alpine front-mounted mowers can be combined with many tractors thanks to the standard 540 and 1000 rpm as well as clockwise and anti-clockwise rotation.
Work safely on alpine terrain thanks to the short, compact headstock and high-quality lightweight design
Centre of gravity very close to the tractor for optimum efficiency on slopes
Perfect quality of cut thanks to the cutter bar with compact angular gear
Front-mounted oscillating linkage
-
Working width: 2.50 m – 3.00 m
Front mowers with oscillating linkage for optimum ground adaptation in a lateral direction
Short, compact attachment to the tractor 
RAMOS 260 FP - 310 FP-K
-
Working width approx.: 2.50 m – 3.00 m
1. Can be combined with many tractors thanks to the standard 540 and 1000 rpm as well as clockwise and anti-clockwise rotation.
2. The FP-S variant with hydraulic lateral movement makes neat mowing on slopes and with twin tyres possible.
310 FP-K variant with shortened headstock for better ground adaptation and tractor-side spring relief
Compact attachment to the tractor
Optimum ground adaptation by hitching the mower unit at the centre of gravity
Perfect quality of cut thanks to the cutter bar with compact angular gear
RAMOS 3060 FP - 3060 FP-RC
-
Working width approx.: 3.00 m
1. Features such as the integrated blade box and the retainer for the quick-change blade system key make the mower incredibly easy to use. In addition, the mower can optionally be used with a hydraulic side guard folding system, a design which reduces set-up and take-down times.
2. The compact oscillating linkage with optimal ground adaptation minimises both the impact on sward quality and the tractor's fuel consumption.
The quick-change blade system, storage facilities for both spare blades and the quick-change blade system key, plus the 180° folding range of the side guards, make the mowers easier to use
Optimum ground adaptation by hitching the mower unit at the centre of gravity
Sophisticated design
Front-mounted headstock with trailing linkage
-
Working width: 3.00 m
Three-dimensional sensing of the ground contours
Hydraulic side shift for harvesting without losses
Perfect for operating in mower combinations RAMOS 310 FZ - 310 FZ-RC
-
Working width approx.: 3.00 m
1. Minimal impact on the ground and economical on fuel thanks to the towing point in front of the mower unit. "Pulling is easier than pushing"
2. The overhead frame allows the mower unit great pivot travel and optimum ground adaptation.
Extremely low-drag thanks to towing point positioned well towards the front
Optimum ground adaptation thanks to large pivot travel
Perfect quality of cut thanks to the cutter bar with compact angular gear
Rear-mounted side attachment
-
Working width: 1.66 m – 3.50 m
Rear mowers for the medium power class
Versatile – can be used with or without a conditioner
Ease of handling
Extremely low-drag and maintenance-friendly 
RAMOS 210 - 350
-
Working width approx.: 2.05 m – 3.50 m
1. Mower unit with side attachment and controlled kinematic lifting mechanism for a high lifting height on headlands and large slope angle of the cutter bar
2. With the effective tine rotor conditioner (KC) and roller conditioner (RC), which can be retrofitted at any time, the mowers can be adapted to a wide range of usage conditions.
Rear-mounted mower for the medium power class, flexible with conditioner
Easy handling and foldable protective sheets for good accessibility
Perfect quality of cut thanks to the cutter bar with compact angular gear
RAMOS 168 InLine - 288 InLine
-
Working width approx.: 1.66 m – 2.82 m
1. Easy access for cleaning and maintenance (e.g. quick blade change system) thanks to a protective sheet which folds on both sides.
2. The spring-loaded impact guard system offers optimum protection if an obstruction is encountered when driving.
Light and robust construction ideal for smaller tractors
Easy handling and foldable protective sheets for good accessibility
Extremely flat cutter bar with spur gear drive
RAMOS 2460 ISL - 2870 ISL
-
Working width approx.: 2.42 m – 2.82 m
1. Easy access for cleaning and maintenance (e.g. quick blade change system) thanks to a protective sheet which folds on both sides.
2. The spring-loaded impact guard system offers optimum protection if an obstruction is encountered when driving.
Light and robust construction ideal for smaller tractors
Easy handling and foldable protective sheets for good accessibility
Extremely flat cutter bar with spur gear drive
Rear-mounted middle attachment
-
Working width: 2.60 m – 4.50 m
FELLA high-performance rear-mounted mowers with middle attachment
Articulated shaft drive
Hydropneumatic cutter bar suspension system
TurboLift for a floating cut 
RAMOS 3060 TL - 4590 TL
-
Working width approx.: 3.00 m – 4.50 m
1. With the hydropneumatic cutter bar suspension system – TurboLift System (TL) – the contact pressure can be adjusted infinitely variably and adapted to different usage conditions.
2. Optimum stability and guidance of the cutter bar thanks to the patented slide track.
Mower hitched in the middle with integrated slide track
Floating cut thanks to the TurboLift system
Perfect quality of cut thanks to the cutter bar with compact angular gear
RAMOS 3060 TL-KC - 3570 TL-KC
-
Working width approx.: 3.00 m – 3.50 m
1. With the hydropneumatic cutter bar suspension system TurboLift System (TL) the contact pressure can be adjusted infinitely variably and adapted to different usage conditions.
2. With the effective tine rotor conditioner (KC) and roller conditioner (RC), the mowers can be adapted to a wide range of usage conditions.
Mower hitched in the middle with integrated slide track
Floating cut thanks to the TurboLift system
Perfect quality of cut thanks to the cutter bar with compact angular gear
RAMOS 2650 TLX - 3670 TLX
-
Working width approx.: 2.60 m – 3.60 m
1. The new RAMOS TLX series combines TurboLift technology for optimised ground contour following with a transportation folding system at the machine's centre of gravity (119°).
2. A whole host of practical features have been included to make harvesting easier and to make controlling your machinery more convenient.
Premium mower with central attachment point and robust spur gear drive
X-folding at the machine's centre of gravity (119°)
Wide pivot travel for optimal ground adaptation
RAMOS 2650 TLX-KC - 3670 TLX-KC
-
Working width approx.: 2.60 m – 3.60 m
1. The new RAMOS TLX series combines TurboLift technology for optimised ground contour following with a transportation folding system at the machine's centre of gravity (119°).
2. The use of a conditioner allows you to obtain high-quality forage more quickly, since it speeds up moisture loss from plants.
Premium mower with central attachment point and robust spur gear drive
X-folding at the machine's centre of gravity (117-120°, depending on the working width)
Wide pivot travel for optimal ground adaptation
Mower combination
-
Working width: 8.30 m – 9.30 m
High-performance mower combinations for large area use
The professional butterfly mowers, with their large working widths, are perfect for use on large farms and for contractors RAMOS 911 TL - 991 TL-KC
-
Working width approx.: 8.30 m – 9.30 m
1. With the hydropneumatic cutter bar suspension system – TurboLift System (TL) – the contact pressure can be adjusted infinitely variably and adapted to different usage conditions.
2. "SafetySwing" impact guard which enables each mower unit to dodge an obstacle independently of the other mower units, and thus protects the sward.
High-performance mower combinations for large area use
The professional butterfly mowers, with their large working widths, are perfect for use on large farms and for contractors
Mower combination with conveyor belt
-
Working width: 8.30 m – 9.30 m
Perfect for use on large farms and for contractors
Powerful alternatives to self-propelled machines
Extremely low-drag and cost-effective
With conditioner and swath gathering for optimum forage quality RAMOS 8312 TL-RCB - RAMOS 9314 TL-KCB
-
Working width approx.: 8.30 m – 9.30 m
1. Operation of all mower functions by means of ISOBUS, such as single lift and conveyor belt operation, enables maximum relief for the operator.
2. Optimum swath gathering even in large quantities of forage thanks to the FELLA beMOVE conveyor belt with integrated hydraulic lateral movement.
Work process automation with ISOBUS control system
Optimum swath gathering with the FELLA beMOVE conveyor belt
Perfect quality of cut thanks to the cutter bar with compact angular gear
Trailed – with transport chassis
-
Working width: 3.50 m
Versatile, trailed mower
Good flexibility of the mower with centrally pivoted drawbar, which can be pivoted to the left and right at the rear of the tractor 
RAMOS 3575 Trans-RC - 3575 Trans-KC
-
Working width approx.: 3.50 m
1. Good flexibility of the mower with centrally pivoted drawbar, which can be pivoted to the left and right at the rear of the tractor.
2. Ample freedom of movement of the mower unit in the working position thanks to improved trailed cutter bar hitch attachment.
Extremely low-drag
Optimum ease of operation
Perfect quality of cut thanks to the cutter bar with compact angular gear
RAMOS 313 Trans-KC - RAMOS 313 Trans-RC
-
1. Good flexibility of the mower with centrally pivoted drawbar, which can be
pivoted to the left and right at the rear of the tractor.
2. Minimal impact on the ground and economical on fuel thanks to the towing point in front of the mower unit. "Pulling is easier than pushing"
Extremely low-drag
Centrally pivoted drawbar
Perfect quality of cut thanks to the cutter bar with compact angular gear
Conditioners
- The quicker way to better forage: When used in combination with a FELLA front-mounted mower, the two FELLA conditioners – the TAURUS 275 D and the TAURUS 285 D – are perfectly suited for efficient forage harvesting, particularly on alpine terrain. This means that the user can achieve rapidly dried, high-quality forage both safely and quickly.
Conditioners for the three-point attachment
-
Conditioning: The quicker way to better forage
Well-suited to use on alpine terrain
Perfectly suited to combinations with front-mounted mower 
TAURUS 275 D
-
1.Rear three-point conditioner for combined use with a front-mounted mower, in particular in alpine terrain.
2. Outstanding conditioning quality thanks to the interaction between the flexible tines and adjustable counter-comb.
The quick way to dry forage
More effective than ever thanks to the larger rotor diameter
Perfect in combination with a RAMOS front-mounted mower
TAURUS 285 D
-
1. Rear three-point conditioner in modern design and with a large rotor diameter for combined use with a front-mounted mower, in particular in alpine terrain.
2. Outstanding conditioning quality through the interaction of flexible tines, adjustable counter-comb and chequered plate in the conditioner hood.
The quick way to dry forage
More effective than ever thanks to the larger rotor diameter
Perfect in combination with a RAMOS front-mounted mower
Mowers with conditioners
-
Standard equipment for numerous mowers, can be retrofitted on some further models
Shortened fermentation process
Disintegration losses and forage contamination are reduced to a minimum
Decisive advantage in adverse weather conditions
Lower costs
Better forage quality 
RC roller conditioners
-
WHY CHOOSE AN RC ROLLER CONDITIONER?
Gummiwalzen print gr2016 1000px
When using the roller conditioner, the hard stalks are squeezed through the rubber rolls and the delicate, nutrient-rich leaves are protected. The specially developed interlocking rubber profile elements ensure intensive but gentle conditioning of legumes and other leafy forage types.
CAN BE ADAPTED TO VARIOUS CONDITIONS
042 Prozessgrafik Rollenaufbereiter COMP v002 1000px
The contact pressure of the rubber profile elements can be adjusted to suit various forage and weather conditions. A spring-loaded foreign body protection is fitted as standard in the conditioner. The conditioner is driven using universal joints and is secured against overload using a shear bolt – a simple but reliable drive concept.
KC tine-rotor conditioners
-
WHY CHOOSE A TINE-ROTOR CONDITIONER?
The spring tine rotor and the four-position adjustable conditioning comb produce a wavy forage structure permeable to air, the result of a number of interacting tools which open the top layer of the leaves, thus facilitating the drainage of water. Through intensive air circulation, moisture loss is accelerated and the dissipation of ground moisture which may be present is encouraged.
CAN BE ADAPTED TO VARIOUS CONDITIONS
The Super C flexible tines are fitted as standard with loss protection and they are extremely resistant to foreign objects in the forage. Due to the preparation intensity, which can be easily adjusted using a counter-comb, a costly adjustment to the speed using a separate gearbox is not necessary. This saves weight, reduces the maintenance effort and ultimately saves money.
Tedders
- The wide range of SANOS tedders from FELLA features optimum mixing of the forage and an excellent spread. From alpine tedders for use in the mountains to professional tedders with transport chassis for use on large farms, FELLA has the perfect tedder for all terrains and for every intended use. The expertise it has gathered in tedder technology since 1932 is currently reflected in the design and reliability of the SANOS product group.
Three-point attachment – alpine
-
Working width: 4.00 m – 5.70 m
Specialists for alpine terrain
Lightweight construction
Ease of handling SANOS 401 DS - 601 DN
-
Working width approx.: 4.00 m – 5.70 m
1. Work safely even on hillsides, thanks to the short headstock and high-quality lightweight design.
2. Synchronous rotor lifting as standard to ensure even folding of the rotors in any position.
The quick way to dry forage
Optimised for Alpine terrain thanks to lightweight design
Perfect in combination with a RAMOS front-mounted mower
Three-point attachment – with follow-up device
-
Working width: 4.50 m – 8.60 m
Allrounders in the tedder range
Versatile
Very high quality of work SANOS 4504 DN - 8608 DN
-
Working width approx.: 4.50 m – 8.60 m
1. The patented low towing point with optimal ground contour ensures very good trailing behaviour and prevents running into the back of the tractor when travelling downhill.
2. Synchronous rotor lifting as standard to ensure even folding of the rotors in any position.
All-rounders in the tedder range
Versatile
Very high quality of work
With transport chassis
-
Working width: 7.70 m – 12.70 m
Rapid and safe transport
Compact on the road, wide out in the field
Large working widths 
SANOS 11008 Trans - 13010 Trans
-
Working width approx.: 10.20 m – 12.70 m
1. Quiet driving behaviour on the road and low weight load from the machine to the tractor thanks to wide transport chassis.
2. Optimised ground adaptation, even on uneven ground, since the transport wheels simultaneously function as contact wheels. Headland lifting means the tedder remains extremely agile even in small areas.
Large working widths with a compact design
Highly manoeuvrable thanks to headland raising system
Super C-tines
SANOS 901 Trans - 800 Trans
-
Working width approx.: 7.70 m – 8.60 m
1. Quiet driving behaviour on the road and low weight load from the machine to the tractor thanks to the wide transport chassis
2. The standard edge spreading device prevents forage losses at the edge of the field
Large working widths with a compact design
Weight is distributed optimally by the transport chassis
Super C-tines
Trailed
-
Working width: 10.20 m – 15.00 m
Classics amongst tedders
Wide range of working widths
Excellent ground adaptation 
SANOS 1100 Hydro - 1300 Hydro
-
Working width approx.: 10.20 m – 12.70 m
1. Low weight load from the machine to the tractor thanks to coupling to a linkage drawbar, adjustable drawbar or hitch hook
2. The standard edge spreading device on both sides prevents forage losses at the edge of the field
Specialists for alpine terrain
Maximum visibility of the rake is possible with front mounting
Durable FELLA rake head with enclosed design
SANOS 1550 Hydro
-
Working width approx.: 15.00 m
Maximum possible working widths with simultaneously low weight load to the tractor
High operating comfort thanks to the continuously variable adjustment of the working height via the double-acting hydraulic cylinder
Large working widths with low power consumption
Weight is distributed optimally by the trailed design
Super C-tines
Rakes
- Robust construction, ease of operation and outstanding raking quality – all JURAS rakes from FELLA boast these qualities. From single-rotor rakes for alpine use to professional four-rotor rakes for contractors, the product range from FELLA has a tedder for every intended use. FELLA has combined its years of experience with the latest knowledge and used this to develop a large range of products with practical benefits for users.
Single rotor – rigid headstock
-
Working width: 3.40 m – 3.60 m
Specially developed single-rotor rakes for use in alpine terrain
Work safely even on hillsides, thanks to the short headstock and high-quality lightweight design
Universally usable as a rear-mounted or front-mounted machine JURAS 301 DS - 351 DS
-
Working width approx.: 3.40 m – 3.60 m
1. Work safely even on hillsides, thanks to the short headstock and high-quality lightweight design.
2. Universally usable as a rear-mounted or front-mounted machine with optimum visibility of the working machine without first driving over the forage.
Specialists for alpine terrain
Best view of the rake is possible with front-mounting
Durable FELLA rake head with enclosed design
Single rotor – with follow-up device
-
Working width: 3.40 m – 4.50 m
Single-rotor rake with large working range
Excellent raking quality and optimum swath formation due to tangentially arranged support arms
Three-point attachment with follow-up device for optimum performance on the field JURAS 301 DN - 456 DN
-
Working width approx.: 3.40 m – 4.50 m
1. Work safely even on hillsides, thanks to the short headstock and high-quality lightweight design.
2. Universally usable as a rear-mounted or front-mounted machine with optimum visibility of the working machine without first driving over the forage.
DN three-point headstock with follow-up device as standard
Neat raking thanks to a wide variety of possible settings
Durable FELLA rake head with enclosed design
Single rotor – trailed
-
Working width: 4.50 m
Trailed single-rotor rake with large working width for small tractors
Very easy attachment via tractor linkage drawbar or hitch
Neat raking JURAS 456 T
-
Working width approx.: 4.50 m
1. Best raking quality and optimum swath formation of the rake head with precise setting options and tangentially arranged rotor arms.
2. Hitching to the linkage drawbar or adjustable drawbar is possible.
Towing bar attachment
Trailed single-rotor rake with large working width for small tractors
Durable FELLA rake head with enclosed design
Dual rotor – lateral windrow deposition – trailed
-
Working width: 6.30 m
Single and double-swath deposition both possible
Neat raking, even on demanding terrain
Low power requirement
Transport width, without converting, less than 3 m JURAS 1502
-
Working width approx.: 6.30 m
1. The cardanic rotor suspension and the twistable frame ensure optimum ground adaptation in all directions and thus also neat raking work.
2. Work flexibly thanks to infinitely variable hydraulic working width adjustment.
Lightweight machine: Working widths even with small tractors
High flexibility thanks to hydraulically adjustable working width
Durable FELLA rake head with enclosed design
Dual rotor – lateral windrow deposition – with transport chassis
-
Working width: 5.75 m – 7.80 m
Dual-rotor side rake, with transport chassis for swathing large, individual swaths or two small, individual swaths
Exact steering behaviour and high stability with steerGUARD rotating shaft steering system
Neat forage transfer and swath formation 
JURAS 1452 - 1603
-
Working width approx.: 5.75 m – 6.60 m
1. Precise steering behaviour and high stability with SteerGUARD, the rotating shaft steering with steering shaft located within the frame.
2. The cardanic rotor suspension ensures optimum ground adaptation in all directions and thus also neat raking work.
Can be adapted to the forage volume using single- or double-swath positioning
Precise SteerGUARD steering system
Durable FELLA rake head with enclosed design
JURAS 7850 - 7850 PRO
-
Working width approx.: 7.80 m
1. Exact steering behaviour and high stability with SteerGUARD on the rotating shaft steering with steering shaft located within the frame.
2. Maximum ground clearance in headland position with CamControl for hydraulic adjustment of the cam track when raising the rotors.
Precise SteerGUARD steering system
CamControl – Can drive over large swaths without difficulty
Maintenance-free rotor arm mounting
Dual rotor – central windrow deposition
-
Working width: 5.80 m – 10.00 m
Dual-rotor rake with variable working and swath width
Optimum swath positioning for the perfect utilisation of the following machines
Low centre of gravity, excellent driving behaviour 
JURAS 671 - 8055 PRO
-
Working width approx.: 5.80 m – 8.00 m
1. Exact steering behaviour and high stability with SteerGUARD on the rotating shaft steering with steering shaft located within the frame.
2. The cardanic rotor suspension ensures optimum ground adaptation in all directions and thus also neat raking work.
3. JURAS 8055 PRO: Quiet running of the machine even under extreme usage conditions thanks to large tyres with standard tandem axle and rigid twin leading wheel.
Optimum ground adaptation thanks to cardanic rotor suspension
Precise SteerGUARD steering system
Durable FELLA rake head with enclosed design
JURAS 10065 - 10065 PRO
-
Working width approx.: 8.80 m – 10.00 m
1. Exact steering behaviour and high stability with SteerGUARD on the rotating shaft steering with steering shaft located within the frame.
2. Infinitely variable hydraulically adjustable working and swath width adjustment with scale for reading out the working width.
Hydraulic working width/swath width adjustment
Precise SteerGUARD steering system
Maintenance-free rotor arm mounting
Four-rotor – central windrow deposition
-
Working width: 12.50 m – 14.00 m
Four-rotor rake with variable working and swath width for large area use
Optimum swath positioning for the perfect utilisation of the following machines
Low centre of gravity, excellent driving behaviour 
JURAS 4000 - 12545 PRO
-
Working width approx.: 12.50 m
1. The cardanic rotor suspension in all four rotors ensures optimum ground adaptation in all directions and thus also neat raking work.
2. Exact swathing even at the end of the field with sequential control as standard as well as synchronous rotor lifting.
Hydraulic working width/swath width adjustment
Performance and low drag in one machine
Durable FELLA rake head with enclosed design
JURAS 14055 PRO
-
Working width approx.: 14.00 m
1. This implement is designed to work faster while picking up forage just as neatly as its predecessor and operating with the same working width as its predecessor – this means more high-quality forage in less time.
2. With a working width of up to 14.00 metres, swath widths of up to 2.60 metres, a rotor diameter of 3.60 metres and 13 tine arms per rotor, it really holds its own against the competition.
Compact transport height of less than 4 metres
Full automation and exact performance data
Operating concept that is tailored perfectly to the needs of contractors
