Navigation : EXPO21XX > TEXTILE 21XX > H15: Finishing machines > Carù
  • Offer Profile
  • Started in 1961 as a mechanical workshop for textile’s machines spare parts and gradually begins to produce machines to cut, brush and finishing corduroy, thus satisfying the specific requirements of the numerous corduroy manufacturers of the area

    With more than 40 year old of experience, Caru’ have occupied a position of first importance in mechanical textile field all over the world.
Product Portfolio
  • CLEANING MACHINES

      • Air Brush

      • The " AIR BRUSH COMPACT" is a small and efficient cleaning machine easily applicable to any machine when one or more traditional brushes don't clean effectively the fabric.
        This machine has been planned to be a combination of brushes and air-blades, which allow the simultaneous removal of all the process scraps and dust inside the fabric.
        Two sets of brushes and air-blades, act at the same time on the front and the back of the fabric.
      • Brush Compact

      • The "BRUSH COMPACT" is a small and efficient cleaning machine easily applicable to any machine when one or more traditional brushes don't clean effectively the fabric.
        The brushe is working near the exhaust hood blade, keeping always the same distant and efficiency; after two suction blades are placed before the exit of the fabric.
        The two sets of brushes, and the two sets of suction blades act at the same time on the front and the back of the fabric.
         
      • Sp200

      • BRUSHING CLEANING SP-200

        The SP–200 brushing is a small and efficient cleaning machine easily applicable to any other machine where request.
        Two brushes are working at the same time
        on the front and on the back of the fabric
        to assure the maximun efficiency.
        The kind of brushes depends from
        the type of fabric processed.
        The small dimension let it to be suitable for different applications.

        The external suction unit is made up of an electric fan connected through flexible pipes to the filter or to other existing system.
      • Spc200

      • Special design of this machine, togheter with the use of special conductive nylon brushes
        makes the SPC-4 unique on its field.
        Excellent on flocked fabrics but also on any kind of sintetic material where the traditional brushes
        can not reach any result.
      • Pc5- Pc10

      • Both these machines are recommended for all fabric cleaning operations,
        where the traditional brushes don't obtain positive effects.
      • Carpet cleaning

      • New carpet cleaning machine with belt-brushes;

        one or double side cleaning
    • VELVET AND CORDUROY FINISHING MACHINES

        • Grinding m/c

        • This machine allow to to resharp the corduroy cutting knives after their use of several meters on the cutting machine.
          The grinding machine is fully automatic, using three diamond covered grinding stones that rotating at high speed let's obtain a perfect
          sharpness of the cutting edge of the round-blade;
          this kind of sharpness is more durable and give a better cut quality.
          On the machine can be adjusted the diameter of the blade and the angle of the cutting edges;
        • Corduroy Cutting m/c Avant Garde

        • The cutting machine "Cord AvantGarde" has been specifically plannedf and realize for the continuous cutting of corduroy.
          The standard model has a working width of 1890mm in a table width of 2000mm.
          Some PATENTS protect the innovations introduced which have made the cutting machine " Cord Avant Garde" the most technocologically advanced machine.
           
        • Velvet Cutting m/c

        • Cutting machine
          for cuttin plain velvet;
          this machine is using a single cutting knife.
          The "Velvet cutting machine" is delivered single or double for the simultaneous and indipendent process of one or two fabric rolls.
        • Dry brushing

        • New corduroy brushing machines for dry process ANR2;
          (new PATENT system with double brush belts)
          This brushing machine is required to form and comb the corduroy ribs after been cutted;
          mainly used after wet brushing process that is the most important step to form quality ribs.
        • Wet brushing

        • New brushing machines for wet corduroy brushing process;
          (new PATENT system with double belts).
          This machine is the result of more than 40 years of experience in the specific field of corduroy and velvet finishing.
          The quality of the processed fabric is excellent, especially considering that the corduroy ribs are formed at high speed.
          This brushing machine is equipped with a fabric impregnating system made up of water blades which help to make the ribs swell, and puts them in the best possible conditions to be brushed;
          This system reduce the required washing bathes that are necessary before the wet brushing process.
          The water used inside the machine is recicle by the means of a rotary filter system, that remove the scraps from the water.
        • Corduroy Waxing Glazing m/c

        • CORDUROY WAXING AND GLAZING MACHINE "C4"
          for the laying of wax or glazing chemicals or water-repellent products.
          with:
          - waxing group for cold or hot wax composed of one stainless steel container heated by electricity, one
          steam heated coating cylinder, one reverse metering roll and cloth pressing cylinder
          - glazing group composed of two chrome-plated big cylinder of 320 mm diameter, heated by steam,
          and 4 glazing cylinders covered with wool felt of 175 mm diameter
          - automatic passage of seam cloth with opening and closing of glazing rollers.
          - N°.2 cleaning brushes for the right and reverse side of the cloth, placed at the outlet of the machine.
      • SUEDING MACHINES

          • Easy-brush - UNICA

          • The NEW sueding & brushing machine EASYBRUSH "UNICA" can use abrasive brushes or sueding rollers
            covered with emery, paper or diamond. The machine can be use in combination giving special range of different effects
            Brushes or sueding rollers which rotate at a variable speed lets to obtain excellent sueding results
            both on knitted and on woven fabrics.
            This machine is characterised by its high sueding efficiency due to a considerable number of contact-points and adjustments.
            Right and reverse side of the fabric can be processed on one passage.
          • Magica

          • SUEDING MACHINE MAGICA S4
            "MAGICA" is a UNIVERSAL SUEDING MACHINE planned and manufactured to obtain with a mix between different grains of
            abrasive bands and abrasive brushes the complete range of sueding and brushing effects.
            This machine due to its strong energy is mostly used on home textile.

            "SINGLE SUEDE/ROLL EFFECT"
            Thick and low nap.
            Obtainable until now with a sueding machine working by contact.

            "TRADITIONAL SUEDING EFFECT"
            Less thick and high nap according to the grain of the abrasive on the sueding rollers or to the grain of the abrasive brushes.
          • AS4 wet sueding

          • The AS4 is a sueding machine that is caracterized by an high versatily
            because lets suede both on wet and dry condition;

            This machine is using four light weight composite carbon fibre roller, that assure a perfect balance and high resistence.
            On this machine is possible to use waterproof emery cloth or diamond tape to cover all the sueding rollers.
             
          • S330 Pattern sueding

          • The sueding machine S330 is made up of one sueding roller
            which is contrasted to a roller covered with rubber.

            This machine can suede woven, knit fabric and other materials as non wovens, denim, outwear, swimwear, sportwear, lingerie,
            used also in home textile and automotive fields.
            as imitation leather and nonwoven fabric so as to obtain finished products of excellent quality.

            Particular is the possibility to make sueded drawings on fabric;
            infact, this possibility is called PATTERN SUEDING,
            that is by means of a rubber roller that has been engraved with drawings
            which has to be reproduced on the fabric surface.
        • EQUIPMENT, ACCESSORIES & abrasive

            • Abrasive emery & brushes

            • MERY PAPERS
              high quality traditional
              emery paper available
            • Brush cutter

            • The ultimate brush-cutting machine
              to cut bristles of abrasive brushes.
              The cutter is designed to cut abrasive
              brushes both in nylon and ceramic.
              Heavy duty steel-mild body
              dramatically reduces vibration and
              noise, improving both cut consistency and cutter life.
              Micrometric adjustment, easy and
              accurate depth calibration.
            • Non stop conveyor belt

            • Non stop conveyor belt to install before or after any continuous machines line;
              this system give the possibility to change the inlet batch without to stop
              the entire machine line.
            • Seam detector

            • For detect any kind of seam.
              Sensivity adjustable.
            • Pneumatic brake

            • PNEUMATIC BRAKE TO USE ON A-FRAME FOR FABRIC TENSION CONTROL
              Max brake torque 500Nm
              Working air pressure 0-6 bar
              Weight 17Kg
              Dimension 320 x 172 x h 420 mm
            • Centering rollers

            • PNEUMATIC CENTERING DEVICE
              This device is usefull to control the inlet of any machine where is required
              a perfect and constant allineament of the fabric to the machine.
            • Guides, knives & spacers

            • Knives for corduroy cutting machine:

              Bright Steel, Blu Steel, Stainless steel knife 102 x 76,2 x 0,2mm
              Bright Steel, Blu Steel, Stainless steel knife 108 x 76,2 x 0,2mm
            • Composite carbon fiber rollers

            • Carbon is one of the most important elements on earth in that the entire organic, animal and vegetable world is based on the chemistry of its composites. Even though it is only present in low percentages in the earth's crust at approx.
          • LASER MACHINES

                • 3D LASER ROLLER ENGRAVING

                • This machine has been design to achieve the engraving of different patterns on rubber rollers;
                  The laser engraving machine has two main parts: a laser source and a controller unit system.
                  The beam emitted from the laser allows the controller to trace patterns onto the surface of the roller. The controller (computer) controls the direction, intensity, speed of movement, and spread of the laser beam aimed at the surface. The surface material is vaporized during laser engraving, ventilation through the use of blowers and a vacuum pump that are required to remove the fumes arising from this process, and for removal of debris on the surface to allow the laser to continue engraving.
                  The New 3D laser engraving gives excellent results on both rubber and elastomeric coatings using in textile,
                  rotogravure cylinders, flexographic and embossing rollers.
            • WOOL BRUSHING MACHINES

                • Wool dry brushing m/c - C6

                • DRY BRUSHING MACHINE TO FINISHING SHEARING WOOL;
                  WITH 8 CROSS BRUSHES ON THE BOTTOM OF THE MACHINE, DIVIDED IN TWO ROWS AND 4 BELTS BRUSHES ON THE TOP OF THE MACHINE, WORKING IN TWO VERTICAL ROWS IN OPPOSITE DIRECTION.
                • Wool wet brushing m/c Str

                • WET WOOL ROTARY BRUSHING MACHINE.
              • RAISING MACHINES

                    • RAISING MACHINES

                    • For woven and knitting fabric with one or two drums
                      SINGLE AND DOUBLE DRUMS RAISING MACHINES WITH 24 -30-36 OR 24 RAISING ROLLERS EACH.
                      RAISING ROLLERS MADE IN CARBON FIBRE TUBE, DRIVEN BY TWO SETS OF THREE V-BELTS EACH.
                      FABRIC TENSION CONTROL BY LOAD CELLS.
                • Shearing m/c

                      • Shearing m/c

                      • This machine can shearing a wide range of fabrics,
                        from worsteds to terry towel to high pile faux fur to automotive items.
                        natural and synthetic fibres as well as for raised and woven velvets, knitted velvet, Raschel, needle felt, flocked fabric.