Navigation : EXPO21XX > SENSORS & CONTROLS 21XX > H12: Metrology > BCM SENSOR
BCM SENSOR
  • Offer Profile
  • BCM SENSOR TECHNOLOGIES b.v.b.a. (BCM) is a manufacturer specialized in design and manufacture of wide range of sensors, from sensing elements to complete transducers and transmitters, which are used for strain/stress-, mass/load-, force/torque-, pressure/level- and temperature-measurements in industrial automation and process control.

    BCM SENSOR TECHNOLOGIES b.v.b.a. (BCM) is an ISO9001 certified company.
Product Portfolio
  • Pressure Measurement

      • Pressure Sensor Dies

          • SE101 Small-Size Absolute Pressure Sensor Dies

          • Pressure Range
            0~1bar, …, ~30bar
            Pressure Type
            absolute
            Non Linearity
            ±0.25%fs
          • SE102 High-Overload-Pressure Sensor Dies

          • Pressure Range
            0~0.4bar, …, ~8bar
            Pressure Type
            gauge, absolute
            Non Linearity
            ±0.15%fs
          • SE103 Sensor Dies For General Application

          • PSD pressure type
            absolute, gauge, sealed gauge
            PSD Non-linearity
            ±0.25%fs, ±0.5%fs
            Pressure Range (gauge)
            0~0.1bar, … , ~25bar
            Pressure Range (absolute, Sealed Gauge)
            0~1bar, …, ~600bar
          • SE105 Flip-Chip Pressure Sensor Dies

          • PSD pressure type
            absolute, gauge
            Pressure Range
            0~1bar, …, ~10bar
            Non Linearity
            up to ±0.2%fs
          • SE106 Sensor Dies For Flow Meter Application

          • Pressure Range
            0~0.2bar, …, ~10bar
            Pressure Type
            differential
            Non Linearity
            up to ±0.25%fs
        • Differential Pressure Transducers

            • 161M Differential Pressure Transducers With High Turndown Ratio

            • Pressure Range
              0~10mbar, …, ~40bar
              Pressure Type
              differential
              Static Pressure / Overload Pressure
              up to 160bar
              Output Signal
              20mV/V
              Accuracy
              up to ±0.05%fs
            • 218D Differential Pressure Transducers For Smart Valve Application

            • Pressure Range
              0~0.1bar, …, ~35 bar
              Pressure Type
              differential
              Static Pressure / Overload Pressure
              1000%fs (max. 100bar)
              Output Signal
              ≥4mV/V
              Accuracy
              0.5%fs
            • 157M Differential Pressure Transducers For Differential Pressure Transmitter Applications

            • Pressure Range
              0~60mbar, …, 5bar
              Pressure Type
              differential
              Static Pressure / Overload Pressure
              up to 100bar
              Output Signal
              ≥10pF, 4~20mA
              Accuracy
              up to ±0.25%fs
            • 160M Differential Pressure Transducers For Flow Meaurement

            • Pressure Range
              0~0.2bar, …, ~10bar
              Pressure Type
              differential
              Static Pressure / Overload Pressure
              up to 100bar
              Output Signal
              ≥10mV/V (≥25mV for range 0.2bar)
              Accuracy
              up to ±0.25%fs
            • 315M Differential Pressure Transducers For Differential Pressure Transmitter Applications

            • Pressure Range
              0~15mbar, …, ~68.9bar (differential)
              0~75mbar, …, ~413.7bar (gauge)
              0~374mbar, …, ~68.9bar (absolute)
              Pressure Type
              differential, gauge, absolute
              Static Pressure / Overload Pressure
              up to 520 bar
              Output Signal
              capacitance in pF, 4~20mA
              Accuracy
              up to ±0.2%fs
          • Differential Pressure Transmitters

              • 219D Differential Pressure Transmitters For Smart Valve Application

              • Pressure Range
                0~0.1 bar, …, ~35 bar
                Pressure Type
                differential
                Static Pressure / Overload Pressure
                1000%fs (max. 100bar)
                Output Signal
                4~20mA, 0~5Vdc
                Accuracy
                ±0.5%fs
              • 493D Differential Pressure Transmitters For Medical Applications

              • Pressure Range
                0~0.1 bar, …, ~1 bar
                Pressure Type
                differential
                Static Pressure / Overload Pressure
                300%fs
                Output Signal
                4~20mA, 1~5V, 1~10V, I2C
                Accuracy
                ±0.5%fs
              • 157T Differential Pressure Transmitters With Flange
                 

              • Pressure Range
                0~60mbar, …, ~5bar
                Pressure Type
                differential
                Static Pressure / Overload Pressure
                up to 100bar
                Output Signal
                4~20mA with HART protocol
                Accuracy
                up to ÷0.1%fs
              • 160T Differential Pressure Transmitters With Flange

              • Pressure Range
                0~0.4bar, …, ~10bar (differential)
                0~50bar, ~160bar (absolute)
                Pressure Type
                differential, absolute
                Static Pressure / Overload Pressure
                up to 160bar
                Output Signal
                4~20mA with HART protocol
                Accuracy
                up to ±0.2%fs
              • 315T Smart Differential Pressure Transmitters

              • Pressure Range
                0~15mbar, …, ~68.9bar (differential)
                0~75mbar, …, ~413.7bar (gauge)
                0~374mbar, …, ~68.9bar (absolute)
                Pressure Type
                differential, gauge, absolute
                Static Pressure / Overload Pressure
                up to 520bar
                Output Signal
                4~20 mA with HART protocol
                Accuracy
                up to 0.075%fs
            • Differential Pressure Sensors

                • 101B(A19D) Differential Pressure Sensors For Low Static Pressure Application

                • Pressure Range
                  0~0.1 bar, …, ~35 bar
                  Pressure Type
                  differential
                  Static Pressure / Overload Pressure
                  1000%fs (max. 100 bar)
                  Output Signal
                  4mV/V
                  Accuracy
                  up to ±0.25%fs
                • 115C Differential Pressure Sensors For High Static Pressure Application

                • Pressure Range
                  0~15mbar, …, ~68.9bar (differential)
                  0~75mbar, …, ~413.7bar (gauge)
                  0~374mbar, …, ~68.9bar (absolute)
                  Pressure Type
                  differential, gauge, absolute
                  Static Pressure / Overload Pressure
                  up to 520 bar
                  Output Signal
                  capacitance in pF, 4~20mA
                  Accuracy
                  up to ±0.2%fs
              • Electronic Pressure Switches

                  • 328S Electronic Pressure Switches

                  • Pressure Range
                    0~0.1bar, …, ~600bar
                    Pressure Type
                    gauge, absolute
                    Output Signal
                    relay output
                    Accuracy
                    up to ±0.25%fs
                  • EPS202 Electronic Pressure Switches With Display

                  • Pressure Range
                    0~0.1bar, …, ~600bar
                    Pressure Type
                    gauge
                    Output Signal
                    1, …, 4 relay output, 4~20mA available on request
                    Accuracy
                    up to ±0.25%fs
                • Pressure Sensors

                    • 500G Mono-Block Pressure Sensors
                       

                    • Pressure Range
                      0~5bar, …, ~8000bar
                      Pressure Type
                      gauge
                      Output Signal
                      ≥10, ≥ 5(for range ≥ 1000bar), 0.5~4.5V(ratiometric), 4~20mA, I2C, SPI
                      Accuracy
                      up to ±0.25%fs
                    • 301B Mono-Block Ceramic Pressure Sensors

                    • Pressure Range
                      0~2bar, …, ~400bar
                      Pressure Type
                      gauge
                      Output Signal
                      2.5mV/V(standard), 0.5~4.5Vdc(ratiometric), 4~20mA, I2C
                      Accuracy
                      up to ±0.5%fs
                    • 664F(A) Inner-Cavity Pressure Sensors

                    • Pressure Range
                      0~16bar, …, ~400bar
                      Pressure Type
                      gauge
                      Output Signal
                      1.2mV, 1.5mV, 2mV, option: 0.5~4.5 Vdc ratiometric, 4~20 mA, I2C
                      Accuracy
                      up to ±0.05%fs
                    • 664F(B) Flush-Diaphragm Pressure Sensors

                    • Pressure Range
                      0~16bar, …, ~400bar
                      Pressure Type
                      gauge
                      Output Signal
                      1.2mV, 1.5mV, 2mV, option: 0.5~4.5 Vdc ratiometric, 4~20 mA, I2C
                      Accuracy
                      up to ±0.05%fs
                    • 664F(C) Mono-Block Pressure Sensors

                    • Pressure Range
                      0~200bar, …, ~5000bar
                      Pressure Type
                      gauge
                      Output Signal
                      1.2mV, 1.5mV, 2mV, option: 0.5~4.5 Vdc ratiometric, 4~20 mA, I2C
                      Accuracy
                      up to ±0.05%fs
                    • 101B(A12.6L) Low-Profile Pressure Sensors

                    • Pressure Range
                      0~60psi, …, ~500psi
                      Pressure Type
                      gauge (standard), absolute, sealed gauge
                      Output Signal
                      50±2mV, option: 0.5~4.5Vdc ratiometric, I2C
                      Accuracy
                      up to ±0.25%fs
                    • 101B(A13H) Compact Pressure Sensors

                    • Pressure Range
                      0~10bar, …, ~1000bar (sealed gauge)
                      0~10bar, ~25bar, ~40bar (absolute)
                      Pressure Type
                      Sealed Gauge, Absolute
                      Output Signal
                      ≥100mV
                      Accuracy
                      up to ±0.25%fs
                    • 101B(A15G) Pressure Sensors
                       

                    • PS Non-linearity
                      ≤±0.25%fs, ≤±0.5%fs
                      Pressure Range
                      0~3.5bar, …, ~20bar (gauge)
                      0~3.5bar, …, ~20bar (absolute)
                      “0~35bar, …, 0~600bar (sealed gauge)
                      Pressure Type
                      gauge, absolute, sealed gauge
                      Output Signal
                      ≥100mV
                      Accuracy
                      up to ±0.25%fs
                    • 101B(A16G) Pressure Sensors
                       

                    • Pressure Range
                      -1~0bar, 0~1bar, …, ~600bar (gauge)
                      0~2.5bar, …, ~16bar (absolute)
                      0~10bar, …, ~250bar (sealed gauge)
                      Pressure Type
                      gauge, absolute, sealed gauge
                      Output Signal
                      ≥ 100mV
                      Accuracy
                      up to ±0.25%fs
                    • 101B(A19L) Compact Pressure Sensors

                    • Pressure Range
                      0~0.2bar, …, ~25bar (gauge)
                      0~0.35bar, …, ~25bar (absolute, sealed gauge)
                      Pressure Type
                      gauge, absolute, sealed gauge
                      Output Signal
                      ≥ 50mV (for range of 0.2bar≥28mV)
                      Accuracy
                      up to ±0.25%fs
                    • 101B(A19G) Pressure Sensors
                       

                    • Pressure Range
                      1~0bar, 0~0.1bar, …, ~35bar (gauge)
                      0~1bar, …, ~35bar (absolute)
                      0~70bar, …, ~600bar (sealed gauge)
                      Pressure Type
                      gauge, absolute, sealed gauge
                      Output Signal
                      ≥60mV, option: 0.5~4.5Vdc ratiometric, 4~20mA, I2C
                      Accuracy
                      up to ±0.25%fs
                    • 101B(F) Based On 101B(A19G) Flange-Mounting Pressure Sensors

                    • Pressure Range
                      -1~0bar, 0~0.1bar, …, 0~35bar (gauge)
                      0~1bar, …, ~35bar (absolute)
                      0~70bar, …, ~600bar (sealed gauge)
                      Pressure Type
                      gauge, absolute, sealed gauge
                      Output Signal
                      ≥ 60mV, option: 0.5~4.5Vdc ratiometric, 4~20mA, I2C
                      Accuracy
                      up to ±0.25%fs
                    • 101B(F) Based On 101B(A19L) Flange-Mounting Pressure Sensors

                    • Pressure Range
                      -1~0bar, 0~0.2bar, …, ~25bar (gauge)
                      0~0.35bar, …, ~25bar (absolute, sealed gauge)
                      Pressure Type
                      gauge, absolute, sealed gauge
                      Output Signal
                      ≥50mV,(for range of 0.2bar≥28mV)
                      Accuracy
                      up to ±0.25%fs
                    • 101B(B1) & 101B(B2) Flush Diaphragm Pressure Sensors

                    • Pressure Range
                      0~0.2bar, …, ~35bar (gauge)
                      0~0.7bar, …, 0~35bar (absolute)
                      0~35bar, ~70bar, ~100bar (sealed gauge)
                      Pressure Type
                      gauge, absolute, sealed gauge
                      Output Signal
                      ≥60mV, option: 0.5~4.5Vdc ratiometric, 4~20mA, I2C
                      Accuracy
                      up to ±0.25%fs
                    • 101B(C) Customized Housing Pressure Sensors

                    • Pressure Range
                      -1~0bar, 0~0.1bar, …, ~35bar (gauge)
                      0~1bar, …, ~35bar (absolute)
                      0~70bar, …, ~600bar (sealed gauge)
                      Pressure Type
                      gauge, absolute, sealed gauge
                      Output Signal
                      ≥60mV, option: 0.5~4.5Vdc ratiometric, 4~20mA, I2C
                      Accuracy
                      up to ±0.25%fs
                    • 112S Board Mounting Pressure Sensors

                    • Pressure Range
                      0~0.35bar, …, ~7bar (gauge)
                      0~1bar (absolute)
                      Pressure Type
                      gauge, absolute
                      Output Signal
                      60mV
                      Accuracy
                      ±0.3%fs
                    • 113S Plastic Housing Pressure Sensors

                    • Pressure Range
                      -0.7~+0.7psi, …, -13~+15psi (gauge for vacuum)
                      0~5psi, …, ~100psi (gauge)
                      0~15psi, …, ~150psi (absolute)
                      Pressure Type
                      gauge for vacuum, gauge, absolute
                      Output Signal
                      60mV(for range≥1.4psi)
                      Accuracy
                      ±0.5%fs
                    • 115S Hybrid Pressure Sensors
                       

                    • Pressure Range
                      0~0.025bar, …, ~7bar (differential)
                      0~0.2bar, …, 0~7bar (gauge)
                      0~1bar, …, ~7bar (absolute)
                      Pressure Type
                      differential, gauge, absolute
                      Output Signal
                      70mV
                      Accuracy
                      ±0.5%fs
                    • 357S To Housing Pressure Sensors
                       

                    • Pressure Range
                      0~0.05bar, …, ~10bar
                      Pressure Type
                      absolute, gauge, differential pressure
                      Output Signal
                      ≥15mV (range of 0.05bar), ≥30mV(ranges of 0.1bar), ≥50mV (ranges of 0.2bar and 0.25bar), ≥70mV (ranges ≥0.35bar)
                      Accuracy
                      up to ±0.1%fs
                  • Pressure Transducers & Transmitters

                      • 105C Pressure Transmitters For Automotive Industry And Refrigerator

                      • Pressure Range
                        0~1bar, …, ~400bar
                        Pressure Type
                        gauge
                        Output Signal
                        4~20mA, 0~5V, 0.5~4.5V (ratiometric)
                        Accuracy
                        up to ±0.5%fs
                      • 110S Precision Pressure Transducers For Gas Metering Application

                      • Pressure Range
                        0~2bar, …, ~80bar
                        Pressure Type
                        absolute, gauge
                        Output Signal
                        12mV/V
                        Accuracy
                        up to ±0.2%rdg, ±0.1%fs
                      • 131C Inner Cavity Pressure Transmitters For General Purpose

                      • Pressure Range
                        0~2bar, …, ~400bar
                        Pressure Type
                        gauge
                        Output Signal
                        4~20mA, 0.5~4.5V (ratiometric), 0~5V, 1~5V, I2C
                        Accuracy
                        up to ±0.5%fs
                      • 131F Inner Cavity Pressure Transmitters For General Purpose

                      • Pressure Range
                        0~16bar, …, ~600bar
                        Pressure Type
                        gauge
                        Output Signal
                        4~20mA, 0.5~4.5V (ratiometric), 0.5~5V, 0.5~10V
                        Accuracy
                        up to ±0.05%fs
                      • 131G Pressure Transmitters For General Purpose With Mono-Block Structure

                      • Pressure Range
                        0~5bar, …, ~600bar
                        Pressure Type
                        gauge, absolute, sealed gauge
                        Output Signal
                        4~20mA, 0.5~4.5V (ratiometric), 0~5V, 1~5V, I2C
                        Accuracy
                        up to ±0.5%fs
                      • 131S Inner Cavity Pressure Transmitters For General Purpose
                         

                      • Pressure Range
                        0~0.35bar, …, ~40bar (gauge)
                        0~1bar, …, ~40bar (absolute)
                        0~10bar, …, ~600bar (sealed gauge)
                        Pressure Type
                        gauge, absolute, sealed gauge
                        Output Signal
                        4~20mA, 0.5~4.5V (ratiometric), 0~5V, 1~5V, I2C
                        Accuracy
                        up to ±0.25%fs
                      • 132C Pressure Transmitters With Flush Diaphragm
                         

                      • Pressure Range
                        0~1bar, …, ~100bar
                        Pressure Type
                        gauge
                        Output Signal
                        4~20mA, 0.5~4.5V (ratiometric), 0.5~5V, 0.5~10V
                        Accuracy
                        ±0.5%fs
                      • 132F Pressure Transmitters With Flush Diaphragm
                         

                      • Pressure Range
                        0~16bar, …, ~400bar
                        Pressure Type
                        gauge
                        Output Signal
                        4~20mA, 0.5~4.5V (ratiometric), 0.5~5V, 0.5~10V
                        Accuracy
                        up to ±0.25%fs
                      • 132S Pressure Transmitters With Flush Diaphragm / Tri-Clamp Connection

                      • Pressure Range
                        0~1bar, …, ~25bar (gauge)
                        0~1bar, …, ~16bar (absolute)
                        0~10bar, …, ~160bar (sealed gauge)
                        Pressure Type
                        gauge, absolute, sealed gauge
                        Output Signal
                        4~20mA, 0.5~4.5V (ratiometric), 0.5~5V, 0.5~10V
                        Accuracy
                        ±0.5%fs
                      • 136C Pressure Transmitters

                         

                      • Pressure Range
                        0~0.5bar, …, ~300bar (gauge)
                        0~0.35bar, …, ~20bar (absolute)
                        Pressure Type
                        gauge, absolute
                        Output Signal
                        4~20mA with integrated 4-digit display
                        Accuracy
                        ±0.5%fs
                      • 136F Pressure Transmitters

                         

                      • Pressure Range
                        0~16bar, …, ~2000bar
                        Pressure Type
                        gauge
                        Output Signal
                        4~20mA, other output available on request
                        Accuracy
                        ±0.5%fs
                      • 136S Pressure Transmitters

                         

                      • Pressure Range
                        0~0.35bar, …, ~40bar (gauge)
                        0~1bar, …, ~40bar (absolute)
                        0~10bar, …, ~600bar (sealed gauge)
                        Pressure Type
                        gauge, absolute, sealed gauge
                        Output Signal
                        4~20mA with integrated 4-digit display
                        Accuracy
                        up to ±0.5%fs
                      • 215T Heavy-Duty Pressure Transmitters

                      • Pressure Range
                        0~15mbar, …, ~600bar (gauge)
                        0~40mbar, …, ~20bar (absolute)
                        Pressure Type
                        gauge, absolute
                        Output Signal
                        4~20mA, 4~20mA with HART protocol
                        Accuracy
                        up to ±0.2%fs
                      • 225T Heavy-Duty Pressure Transmitters

                      • Pressure Range
                        0~15mbar, …, 0~350bar, 0~420bar (gauge)
                        0~15mbar, …, ~100bar (absolute)
                        Pressure Type
                        gauge, absolute
                        Output Signal
                        4~20mA with HART protocol
                        Accuracy
                        up to ±0.2%fs
                      • 430S Low Gauge Pressure Transmitters

                      • Pressure Range
                        -30~+30mbar, …, -600~+600mbar
                        Pressure Type
                        gauge
                        Output Signal
                        4~20mA, 0.5~4.5Vdc (ratiometric), 0~5Vdc, 1~5Vdc, I2C
                        Accuracy
                        ±0.5%fs
                      • 433S Vacuum Transmitters
                         

                      • Pressure Range
                        0~400mbar, …, ~800mbar
                        Pressure Type
                        absolute
                        Output Signal
                        4~20mA, 0.5~4.5Vdc (ratiometric), 0~5V, 1~5V, I2C
                        Accuracy
                        ±0.5%fs
                      • 451S Low Pressure Transmitters With Display For Medical Application

                      • Pressure Range
                        0~0.2bar, …, ~10bar
                        Pressure Type
                        gauge
                        Output Signal
                        4~20mA, 0~5V
                        Accuracy
                        ±0.5%fs
                      • 720G High Pressure Transducers And Transmitters

                      • Pressure Range
                        0~200bar, …, ~8000bar
                        Pressure Type
                        gauge
                        Output Signal
                        10mV/V, 5mV/V (for range ≥ 1000bar), 4~20mA, 0~5V, 1~5V, I2C
                        Accuracy
                        ±0.5%fs, ±1%fs
                      • 722F High Gauge Pressure Transducers And Transmitters

                      • Pressure Range
                        0~200bar, …, ~5000bar
                        Pressure Type
                        gauge
                        Output Signal
                        4~20mA, 0.5~4.5Vdc (ratiometric), 0~5V, 1~5V, I2C
                        Accuracy
                        up to ±0.5%fs
                    • Level Measurement

                        • Liquid Level Transducers & Transmitters

                            • LV16 Mini-Diameter Submersible Liquid Level Transducers

                            • Measuring Range
                              0~5mH2O, …, ~100mH2O
                              Accuracy
                              ±0.5%fs
                              Pressure Type
                              gauge, absolute
                            • LV35 Liquid Level Transducers And Transmitters For Tank Applications In Chemical Industry

                            • Measuring Range
                              0~1mH2O, …, ~200mH2O
                              Accuracy
                              up to ±0.25%fs
                              Pressure Type
                              gauge
                            • LV36 Submersible Liquid Level Transmitters With Flush Diaphragm

                            • Measuring Range
                              0~1mH2O, …, ~200mH2O
                              Pressure Type
                              gauge, absolute
                              Accuracy
                              ±0.5%fs
                            • LV37 Liquid Level Transmitters With Display
                               

                            • Measuring Range
                              0~1mH2O, …, ~200mH2O
                              Pressure Type
                              gauge
                              Accuracy
                              up to ±0.25%fs
                            • LV38 Liquid Level Transmitters For Flange Mounting

                            • Measuring Range
                              0~1mH2O, …, ~200mH2O
                              Pressure Type
                              gauge
                              Accuracy
                              up to ±0.25%fs
                            • LV39 Liquid Level Transducers And Transmitters With Overvoltage Protection

                            • Measuring Range
                              0~1mH2O, …, ~200mH2O
                              Pressure Type
                              gauge
                              Accuracy
                              up to ±0.25%fs
                            • LV66(A)/LV66(B) Oil Level Transmitters

                            • Measuring Range
                              5~100mm, …, 5~1000mm (oil or other non-conductive liquid level)
                              Accuracy
                              up to ±0.3%fs
                          • Flow Measurement

                                  • TFS2000 Thermal Gas Flow Modules For Inline Gas Measurement

                                  • Measuring Range
                                    0~6m³/h
                                    Accuracy
                                    up to ±1.5%rdg
                                  • TFS2200 Thermal Gas Flow Modules For Residential Smart Gas Metering

                                  • Measuring Range
                                    0~6m³/h
                                    Accuracy
                                    up to ±1.5%rdg
                                  • Thermal Gas Flow Transmitters For Gas Flow Rate Measurement

                                  • Measuring Range
                                    0~1.2m³/h, …, ~12m³/h
                                    Accuracy
                                    up to ±1.5%rdg
                                • Strain Gauges

                                    • Metal Foil Strain Gauges for Transducer Application

                                        • Linear Strain Gauges

                                        • BCM SENSOR linear strain gauges are specially developed for manufacturing precision force transducers which employ bending beam working principle. For the purpose of this specific application, the linear strain gauges are temperature and creep compensated, and they can be either encapsulated or open-faced according to the requirement.
                                        • Shear Strain Gauges

                                        • BCM SENSOR shear strain gauges are specially developed for manufacturing precision force and torque transducers which employ shear beam working principle. For the purpose of this specific application, the shear strain gauges are temperature and creep compensated, and they can be either encapsulated or open-faced according to the requirement.
                                        • 90º Strain Gauges

                                        • BCM SENSOR 90° or T type strain gauges are specially developed for manufacturing column load cells which employ column working principle. For the purpose of this specific application, the 90° strain gauges are temperature and creep compensated, and they can be either encapsulated or open-faced according to the requirement.
                                        • Half-Bridge Strain Gauges

                                        • BCM SENSOR half-bridge strain gauges are specially developed for manufacturing precision force transducers which employ bending beam working principle. They are suitable for applications where the beam length is limited. For the purpose of this specific application, the half-bridge strain gauges are temperature and creep compensated, and they can be either encapsulated or open-faced according to the requirement.
                                        • Full-Bridge Strain Gauges

                                        • BCM SENSOR full-bridge strain gauges are specially developed for manufacturing precision force transducers which employ bending beam working principle. For the purpose of this specific application, the full-bridge strain gauges are temperature and creep compensated, and they can be either encapsulated or open-faced according to the requirement.
                                        • Diaphragm Strain Gauges

                                        • manufacturing precision force transducers. For the purpose of the specific application, the full-bridge strain gauges are temperature and creep compensated, and they can be either encapsulated or open-faced according to the requirement.
                                      • Semiconductor Strain Gauges / Bondable Resistors and Terminals

                                          • Semiconductor Strain Gauges

                                          • Gauge Type
                                            SN: without backing, SB: with backing
                                            Nominal Resistance
                                            15Ω, …, 1000Ω
                                            Backing Material
                                            modified epoxy resin, modified phenolic resin
                                            Working Temperature Range
                                            standard: -50~+85°C, available on request: -50~+150°C, -50~+250°C
                                            Gauge Factor
                                            80, …, 150
                                            Strain Limit
                                            6000µε
                                            Fatigue Life
                                            >2×106
                                          • Bondable Terminals

                                          • Resistor Type
                                            2 geometry of TCI-series and TCG-series
                                            Foil Alloy
                                            gold-plated copper (G)
                                            Backing Material
                                            polyimide resin (I), advanced polyimide (A), glass-fiber reinforced polyimide (G)
                                          • Bondable Compensation Resistors

                                          • Resistor Type
                                            resistors can be cut, with fixed resistance, can be rubbed, and can be short circuited
                                            Initial Resistance
                                            0.2Ω, …, 200Ω
                                            Maximum Or Minimum Resistance After Trim
                                            0.5Ω, …, 50Ω
                                            Backing Material
                                            modified phenolic resin (F), glass-fiber reinforced epoxy (E), laminated polyetherketone (B), polyimide resin (I), advanced polyimide (A), glass-fiber reinforced polyimide (G)
                                        • Adhesives

                                              • Adhesives

                                              • BCM are able to supply strain gauge adhesives, protective coatings and sealants that are useful and necessary in strain gauge applications.

                                                The specifications of those products can be found in the datasheet in Documentation. And there is also the procedure of bonding strain gauges.
                                          • Load Cells

                                              • Single Point Load Cells

                                                  • 1660 Single Point Load Cells

                                                  • Capacity
                                                    0.5kg, …, 25kg
                                                    Accuracy
                                                    ±0.02%fs
                                                    Max. Platform Size
                                                    200mm x200mm
                                                  • 1661 Single Point Load Cells

                                                  • Capacity
                                                    3kg, ..,, 50kg
                                                    Accuracy
                                                    ±0.03%fs, OIMLC3
                                                    Max. Platform Size
                                                    250mm x 350mm
                                                  • 1662 Single Point Load Cells

                                                  • Capacity
                                                    3kg, …, 30kg
                                                    Accuracy
                                                    ±0.02%fs
                                                    Max. Platform Size
                                                    250mm x 350mm
                                                  • 1663 Single Point Load Cells

                                                  • Capacity
                                                    20kg, …, 200kg
                                                    Accuracy
                                                    ±0.02%fs
                                                    Max. Platform Size
                                                    350mm x 400mm
                                                  • 1664 Single Point Load Cells

                                                  • Capacity
                                                    50kg, …, 500kg
                                                    Accuracy
                                                    ±0.02%fs, OIMLC3
                                                    Max. Platform Size
                                                    400mm x 400mm
                                                  • 1664(I) Single Point Load Cells

                                                  • Capacity
                                                    50kg, …, 500kg
                                                    Accuracy
                                                    ±0.02%fs
                                                    Max. Platform Size
                                                    450mm x 550mm
                                                  • 1665 Heavy Duty Single Point Load Cells

                                                  • Capacity
                                                    50kg, …, 700kg
                                                    Accuracy
                                                    ±0.02%fs, OIMLC3
                                                    Max. Platform Size
                                                    600mm x 600mm
                                                  • 1666 Heavy Duty Single Point Load Cells

                                                  • Capacity
                                                    50kg, …, 500kg
                                                    Accuracy
                                                    ±0.02%fs
                                                    Max. Platform Size
                                                    450mm x 450mm
                                                  • 1667 Single Point Load Cells

                                                  • Capacity
                                                    50kg, …, 2000kg
                                                    Accuracy
                                                    ±0.02%fs(standard), OIMLC3
                                                    Max. Platform Size
                                                    1200mm x 1200mm
                                                  • 1668 Single Point Load Cells

                                                  • Capacity
                                                    0.3kg, …, 5kg
                                                    Accuracy
                                                    ±0.02%fs
                                                    Max. Platform Size
                                                    200mm x 200mm
                                                  • 1668(S) Single Point Load Cells

                                                  • Capacity
                                                    0.2kg, …, 3kg
                                                    Accuracy
                                                    0.02%fs
                                                    Max. Platform Size
                                                    200mm x 200mm
                                                  • 1669 Single Point Load Cells

                                                  • Capacity
                                                    5kg, …, 30kg
                                                    Accuracy
                                                    0.02%fs
                                                    Max
                                                    . Platform Size
                                                    200mm x 200mm
                                                  • 166G/169G Single Point Load Cells

                                                  • Capacity
                                                    1kg, …, 100kg
                                                    Accuracy
                                                    ±0.05%fs
                                                    Max. Platform Size
                                                    180mm x 180mm
                                                  • 166H/169H Single Point Load Cells

                                                  • Capacity
                                                    0.3kg, …, 200kg
                                                    Accuracy
                                                    ±0.05%fs
                                                    Max. Platform Size
                                                    120mm x 120mm
                                                  • 166V Single Point Load Cells

                                                  • Capacity
                                                    3kg, …, 30kg
                                                    Accuracy
                                                    ±0.05%fs
                                                    Max. Platform Size
                                                    200mm x 200mm
                                                  • 166Z/169Z Single Point Load Cells

                                                  • Capacity
                                                    30kg, …, 200kg
                                                    Accuracy
                                                    ±0.02%fs
                                                    Max. Platform Size
                                                    180mm x 180mm
                                                • Shear Beam Load Cells

                                                    • 3417/3497 Single-Ended Shear Beam Load Cells

                                                    • Capacity
                                                      0.5t, …, 2t
                                                      Accuracy
                                                      ±0.02%fs
                                                    • 3418/3498 Single-Ended Shear Beam Load Cells

                                                    • Capacity
                                                      0.5t, …, 2t
                                                      Accuracy
                                                      ±0.02%fs
                                                    • 3418(I)/3498(I) Single-Ended Shear Beam Load Cells

                                                    • Capacity
                                                      0.5t, …, 10t
                                                      Accuracy
                                                      ±0.02%fs
                                                    • 3419/3499 Heavy Duty Single-Ended Shear Beam Load Cells

                                                    • Capacity
                                                      0.5t, …, 50t
                                                      Accuracy
                                                      ±0.02%fs, ±0.03%fs
                                                    • 3468 Aluminum Single-Ended Shear-Beam Load Cells

                                                    • Capacity
                                                      100kg, …, 1000kg
                                                      Accuracy
                                                      ±0.03%fs
                                                    • 3468(I) Aluminum Single-Ended Shear-Beam Load Cells

                                                    • Capacity
                                                      100kg, …, 1000kg
                                                      Accuracy
                                                      ±0.03%fs
                                                  • Compression & Tension Load Cells

                                                      • 1191 Miniature Compression Load Cells

                                                      • Capacity
                                                        0.1kN, …, 20kN
                                                        Accuracy
                                                        up to ±0.5%fs
                                                      • 1211/1291 Cylindrical Compression Load Cells

                                                      • Capacity
                                                        1t, …, 10t
                                                        Accuracy
                                                        up to ±0.1%fs
                                                      • 1311/1391 Shear-Web Compression Load Cells
                                                         

                                                      • Capacity
                                                        10klb, …, 200klb
                                                        Accuracy
                                                        up to ±0.02%fs
                                                      • 1312/1392 Shear-Web Compression And Tension Load Cells

                                                      • Capacity
                                                        2t, …, 300t
                                                        Accuracy
                                                        up to ±0.05%fs
                                                      • 1415 Fixable Compression Load Cells
                                                         

                                                      • Capacity
                                                        0.5t, …, 500t
                                                        Accuracy
                                                        up to ±0.05%fs
                                                      • 1416 Rocker Pin Compression Load Cells
                                                         

                                                      • Capacity
                                                        10t, …, 50t
                                                        Accuracy
                                                        ±0.05%fs
                                                      • 6918/6998 Compression & Tension Load Cells Of High Protection

                                                      • Capacity
                                                        0.5t, …, 30t
                                                        Accuracy
                                                        ±0.02%fs, OIMLC3
                                                    • Load Pins

                                                        • 5715/5795 Single-Ended Load Pins

                                                        • Capacity
                                                          10kN, …, 300kN
                                                          Accuracy
                                                          up to ±0.2%fs
                                                        • 5718/5798 Double Ended Load Pins

                                                        • Capacity
                                                          10kN, …, 800kN
                                                          Accuracy
                                                          up to ±0.2%fs
                                                        • 5719/5799 Double-Ended Load Pins

                                                        • Capacity
                                                          10kN, …, 1000kN
                                                          Accuracy
                                                          up to ±0.2%fs
                                                        • 6795 Hermetically Sealed Single-Ended Load Pins
                                                           

                                                        • Capacity
                                                          0.3t, …, 50t
                                                          Accuracy
                                                          up to ±1%fs
                                                        • 6798(A)/6798(B) Hermetically Sealed Double-Ended Load Pins

                                                        • Capacity
                                                          0.5t, …, 100t
                                                          Accuracy
                                                          up to ±0.5%fs
                                                      • Weighing Components

                                                          • JB (Type I, Type II) Load Cell Junction Boxes

                                                          • The JB (type I/type II) junction box is to realize the multiple load cells working together as one system.
                                                            This model features high precision, stability, and reliability. It has an aluminum cust with a plastic cover.
                                                          • JB (Type III) Load Cell Junction Boxes

                                                          • The JB (type III) junction box is to realize the multiple load cells working together as one system.
                                                            This model features high precision, stability, and reliability. It has various material available for the box.
                                                          • JB (Type IV) Load Cell Junction Boxes

                                                          • The JB (type IV) junction box is to realize the multiple load cells working together as one system.
                                                            This model features high precision, stability, and reliability. Its power supply and output signal can be adjustable on request. And its box is made from stainless steel.
                                                          • WD21 Weighing Indicators

                                                          • Model WD21 weighing indicator is a kind of general wighing indicator, which adopt excellent AD IC (the conversion speed > 50/s). It has internal 60,000 counts of resolution and many benefits such as easy to use, high precision, stability, credibility, zero balance adjustment and wide input signal range, upper and lower limit setting and alarm, peak test (option). The indicator can be easily implimented into different kinds of electronic scales which are built up from load cells, such as platform scales, ground scales, vehicle scales, and oil scales.


                                                            Display
                                                            5 digits LCD display
                                                        • Force Measurement

                                                            • Force Transducers

                                                                • 159A Miniature Single Bending Beam Force Transducers

                                                                • Capacity
                                                                  1.2N, …, 500N
                                                                  Accuracy
                                                                  up to ±0.1%fs
                                                                • 159B Miniature Single Bending Beam Force Transducers

                                                                • Capacity
                                                                  0.5kg, …, 30kg
                                                                  Accuracy
                                                                  ±0.1%fs
                                                                • 156K/159K Miniature Single Bending Beam Force Transducers

                                                                • Capacity
                                                                  7kg, …, 20kg
                                                                  Accuracy
                                                                  ±0.05%fs
                                                                • 1531 Ceramic Force Transducers

                                                                • Capacity
                                                                  0.1kg, …, 50kg
                                                                  Accuracy
                                                                  up to ±0.5%fs
                                                                • 2911 Tensile & Compression Force Transducers

                                                                • Capacity
                                                                  100kg, …, 1000kg
                                                                  Accuracy
                                                                  ±0.03%fs
                                                                • 2912 Tensile & Compression Force Transducers

                                                                • Capacity
                                                                  50kN, …, 300kN
                                                                  Accuracy
                                                                  ±0.1%fs
                                                                • 2965 Paddle Force Transducers

                                                                • Capacity
                                                                  500N, 1000N, 1500N
                                                                  Accuracy
                                                                  up to ±0.05%fs
                                                                • UF Compression And Tension Force Transducers

                                                                • Capacity
                                                                  1N, …, 2500N
                                                                  Accuracy
                                                                  up to ±0.1%fs
                                                                • UG Force Transducers With Overload Protection

                                                                • Capacity
                                                                  3N, …, 300N
                                                                  Accuracy
                                                                  up to ±0.1%fs
                                                              • Torque Measurement

                                                                  • Rotary Torque Transducers

                                                                      • 1811 Non-Contact Rotary Torque Transducers
                                                                         

                                                                      • Capacity
                                                                        5Nm, …, 300kNm
                                                                        Accuracy
                                                                        ±0.5%fs
                                                                        Max. Speed
                                                                        8000rpm
                                                                      • 1815 Non-Contact Rotary Torque Transducers
                                                                         

                                                                      • Capacity
                                                                        0.005Nm, …, 2Nm
                                                                        Accuracy
                                                                        ±0.5%fs
                                                                        Max. Speed
                                                                        4000rpm
                                                                      • 1816 Non-Contact Rotary Torque Transducers With Air Bearing

                                                                      • Capacity
                                                                        50Nm, …, 20kNm
                                                                        Accuracy
                                                                        ±0.5%fs
                                                                        Max. Speed
                                                                        10000rpm
                                                                    • Static Torque Transducers

                                                                        • 1911/1991 Static Torque Transducers

                                                                        • Capacity
                                                                          100Nm, …, 1kNm
                                                                          Accuracy
                                                                          up to ±0.1%fs
                                                                        • 1912/1992 Static Torque Transducers

                                                                        • Capacity
                                                                          30Nm, …, 300Nm
                                                                          Accuracy
                                                                          up to ±0.1%fs
                                                                        • 1913/1993 Static Torque Transducers

                                                                        • Capacity
                                                                          30Nm, …, 300Nm
                                                                          Accuracy
                                                                          up to ±0.1%fs
                                                                        • 1914/1994 Static Torque Transducers

                                                                        • Capacity
                                                                          10Nm, …, 200Nm
                                                                          Accuracy
                                                                          up to ±0.1%fs
                                                                        • 1915/1995 Static Torque Transducers

                                                                        • Capacity
                                                                          100lbin, …, 100kNm
                                                                          Accuracy
                                                                          up to ±0.2%fs
                                                                        • 1916/1996 Static Torque Transducers

                                                                        • Capacity
                                                                          200lbin, …, 100kNm
                                                                          Accuracy
                                                                          up to ±0.2%fs
                                                                      • Temperature Measurement

                                                                              • T3000 Resistance Temperature Transmitters

                                                                              • Measuring Range
                                                                                -200 ~ +800°C
                                                                                Output Signal
                                                                                4~20mA, resistance
                                                                                Accuracy
                                                                                ±0.15%fs
                                                                              • Bondable Thermal Resistors

                                                                              • Application
                                                                                AA series: surface temperature measurement
                                                                                XYZ series: friction-induced thermal strain measurement
                                                                                Measurement Accuracy
                                                                                ±0.5°C
                                                                                Metal Foil
                                                                                pure nickel
                                                                                Resistance (R0)
                                                                                AA series: 50Ω @0°C, 100Ω @0°C
                                                                                XYZ series: 2Ω @25°C, 3Ω @25°C, 5Ω @25°C
                                                                                Stability Of R0
                                                                                ±0.2Ω
                                                                                Working Temperature
                                                                                -60 ~ +160 °C (for polyimide resin backing),
                                                                                -160 ~ +200 °C (for advanced polyimide backing),
                                                                                -260 ~ +250 °C (for glass-fiber reinforced polyimide backing)
                                                                            • Instruments

                                                                                • Sensor Signal Conditioners

                                                                                    • A1 Sensor Signal Conditioners For One Sensor
                                                                                       

                                                                                    • Input Sensitivity
                                                                                      1mV/V, …, 12mV/V
                                                                                      Output Signal
                                                                                      4~20mA, 0~10mA, 0~5V, 0~10V
                                                                                      Accuracy
                                                                                      ±0.1%fs
                                                                                    • A2 Heavy Duty Signal Conditioners For One Sensor
                                                                                       

                                                                                    • Input Sensitivity
                                                                                      1mV/V, …, 12mV/V
                                                                                      Output Signal
                                                                                      4~20mA, 0~10mA, 0~20mV, 0~5V, 0~10V, -5~+5V
                                                                                      Accuracy
                                                                                      up to ±0.1%fs
                                                                                      Accuracy
                                                                                      up to ±0.1%fs
                                                                                    • A3 Heavy Duty Signal Conditioners For Four Sensors

                                                                                    • Input Sensitivity
                                                                                      1mV/V, …, 12mV/V
                                                                                      Output Signal
                                                                                      4~20mA, 0~10mA, 0~5V, 1~5V
                                                                                      Accuracy
                                                                                      up to ±0.1%fs