UNAX® (UNited AXis) is a superior CNC control to coordinate linear and rotative motions. With a RJ45 cable UNAX® is directly connected to the XENAX® servo controllers. The servo controller XENAX® can control LINAX® linear axes or rotative servo motors.

State controller with axis observer and motor
communication
The state controller with axis observer in the new XENAX® Xvi servo controller ensures high stiffness, quiet running and maximum precision. The XENAX® Xvi servo controller communicates via I2C-bus with the connected LINAX® linear motor axis. The data are directly read from the memory of the linear motor. For this reason, the controller knows the motor parameters, like force constant, inductance, number of pole pairs, etc. Within these parameters, an automatic setup of the state controller will be done.

XENAX® Xvo 50V5 OEM is a very compact open frame servo controller with Ethernet TCP/IP interface. The integrated web server contains the graphical user interface WebMotion. Implementation and parameterization take place on the Web Browser.

The XENAX® Xvo servo controller is also available without Ethernet and Webserver. Programming is then possible with the connectable "Cable Webserver". With this simple
version the controller could be used for example as a pulse- / direction module to realize a 1:1 upgrade
from stepper motor axis to servo- or LINAX® linear axis.

XENAX® Xv 50V6 is a compact servo controller with Ethernet TCP/IP interface. The integrated web server
contains the graphical user interface WebMotion. Implementation and parameterization take place on the Web Browser. The integrated motor output stage works with vector oriented rotating field control.

Sv 72V10 is a compact thousand fold proven servo controller. It can be operated using a simple VT100
terminal or an emulation VT100. WinMotion is the available graphical user interface. The powerful
integrated motor output stage works purely digitally with high efficiency.

Ultra compact linear axis with linear motor, integrated precise guidance and measurement system. The patented mono-block construction allows the most compact dimensions and leads to a high mechanical stiffness.

Linear axis with linear motor, integrated precise guidance and measurement system. The patented
mono-block construction allows the most compact dimensions and leads to a high mechanical stiffness.

A compact linear axis with integrated linear motor and measurement system. With a precise two-row
Minirail ball recirculation guideway system and a high mechanical stiffness.

U = Universal: These axes are real ‘all-rounders’. There are three mounting possibilities: mounting to slide, to the ground plate or on the front face. Also interesting are the four long holes right through the sliding carriage. For example, this allows the direct back to back mounting of two Lxu slides, which is
ideal for X-Z handling. In a vertical orientation, an integrated weight compensation unit is available. The air pressure coupling is inside the 90° ‘rotatable’ connector case.

S = Shuttle: As the name implies, the Lxs shuttle series are basis axes for long strokes up to 1200mm. Of particular importance is the wide body construction with recessed linear motor, through which the height is reduced to just 38mm. The widely spaced guiding rails are able to withstand high moments of force.

The St 50V4 is a compact stepper motor controller for 2 phase stepper motors and 2 phase reluctance
linear motors. Micro-step mode up to 1/64 step. With WinMotion a graphical user interface is available.

3 phase brushless servo motor with robust fully shielded connector plugs. Incremental encoder with 1024
impulses, thereby giving 4096 counter points per rotation for the servo controller.