Navigation : EXPO21XX > MATERIAL HANDLING 21XX > H35: Sensors and Vision > Active Silicon
  • Offer Profile
  • Active Silicon, founded in 1988, designs and manufactures imaging products for the acquisition and processing of image data in a PC or embedded environment. Product areas include camera-end modules, frame grabbers and embedded vision systems, with application areas in manufacturing, life sciences, medical imaging, security and defense. All the products and technologies are developed in-house and owned by the company. For further details, visit www.activesilicon.com

Product Portfolio
  • Frame Grabbers

  • Active Silicon designs and manufactures a wide range of acquisition solutions based around leading-edge hardware technology and versatile software toolkits. Our frame grabber range includes acquisition solutions for CoaXPress, Camera Link and LVDS in different form factors. Operating system support includes 64-bit versions of Windows, Linux, and QNX.
      • FireBird Series

          • FireBird CoaXPress Frame Grabber (1xCXP6-2PE4L)

            • CoaXPress gives high-speed data, power and camera control all over a single cable.
            • Competitively priced to offer a real-time alternative to GigE Vision (NBASE-T) and USB3 Vision.
            • High performance with over 6 Gigabits/s acquisition rate.
            • ActiveDMA engine – acquisition with zero CPU usage.
            • Fast PCI Express 4-lane Gen2 interface.
            • Comprehensive I/O, including front panel I/O.
            • Supports PoCXP (Power over CoaXPress).
            • Micro-BNC connector.
            • Half-length low-profile PCI form-factor.
            • Supported by the proven ActiveSDK.
            • Low profile or full height bracket options available.
            • Full GenICam support (including GenTL Producer).
          • FireBird CoaXPress Frame Grabber (Quad CXP-6)

            • Quad input CoaXPress Frame Grabber.
            • Four CoaXPress links, each at 6.25 Gbps.
            • RISC based ActiveDMA engine gives zero CPU acquisition.
            • 8-lane Gen2 PCI Express interface.
            • Half-length PC format.
            • Windows and Linux support (32 bit & 64 bit support).
            • Certified compliant through the JIIA CoaXPress Product Certification Program.
            • Full GenICam support via GenTL Producer.
          • FireBird CoaXPress Frame Grabber (Dual CXP-6)

            • Dual input CoaXPress Frame Grabber.
            • Two CoaXPress links, each at 6.25 Gbps.
            • RISC based ActiveDMA engine gives zero CPU acquisition.
            • 8-lane Gen2 PCI Express interface.
            • Half-length PC format.
            • Windows and Linux support (32 bit & 64 bit).
            • Certified compliant through the JIIA CoaXPress Product Certification Program.
            • Full GenICam support via GenTL Producer.
          • FireBird Camera Link Frame Grabber (2xCLD-2PE8)

            • Supports the latest v2.0 Camera Link interface.
            • RISC based ActiveDMA engine gives zero CPU acquisition.
            • High speed PCI Express 8-lane Gen2 interface.
            • Comprehensive I/O.
            • Supports PoCL (Power over Camera Link).
            • Standard half-length PCI form factor.
            • Supported by the proven PHX software SDK.
            • Supports GenICam for CLProtocol and GenCP cameras.
            • Includes GenICam GenTL Producer.
          • FireBird Camera Link Frame Grabber (1xCLD-2PE4)

            • Supports the latest v2.0 Camera Link interface.
            • Comprehensive I/O.
            • Camera Link Mini connectors (HDR/SDR).
            • Supports PoCL (Power over Camera Link).
            • ActiveDMA technology guaranties zero CPU usage acquisition.
            • Standard half-length PCI form factor.
            • Supported by the proven PHX software SDK.
            • Supports GenICam for CLProtocol & GenCP cameras.
            • Includes GenICam GenTL Producer.
          • FireBird Camera Link Frame Grabber (1xCLD-2PE4L)

            • Supports the latest v2.0 Camera Link interface.
            • Half length PCI Express form-factor.
            • Low profile or full height bracket options available.
            • Camera Link mini connectors (HDR/SDR).
            • Supports PoCL (Power over Camera Link).
            • Comprehensive I/O.
            • RISC based ActiveDMA gives zero CPU usage acquisition.
            • Supported by the proven PHX SDK.
            • Supports GenICam for CLProtocol & GenCP cameras.
            • Includes GenICam GenTL Producer.
          • FireBird Camera Link Frame Grabber (2xCLM-2PE8)

            • Supports the latest v2.0 Camera Link interface.
            • RISC based ActiveDMA engine gives zero CPU acquisition.
            • High speed PCI Express 8-lane Gen2 interface.
            • Comprehensive I/O.
            • Supports PoCL (Power over Camera Link).
            • Standard half-length PCI form factor.
            • Supported by the proven PHX software SDK.
            • Supports GenICam for CLProtocol and GenCP cameras.
            • Includes GenICam GenTL Producer.
          • FireBird Camera Link 3U cPCI Serial Frame Grabber

            • Supports the latest v2.0 Camera Link interface.
            • Comprehensive I/O supporting standard FireBird I/O adapters.
            • Watchdog feature.
            • Standard Camera Link connectors (MDR).
            • Supports PoCL (Power over Camera Link).
            • RISC based ActiveDMA gives zero CPU usage acquisition.
            • 3U CompactPCI Serial form-factor.
            • Extended temperature operation.
            • Supported by the PHX Software Development Kit (SDK).
            • Supports GenICam for CLProtocol & GenCP cameras.
            • Includes GenICam GenTL Producer.
          • FireBird Quad USB 3.0 Host Controller

            • 4 x USB 3.0 compliant downstream ports.
            • Dual full USB 3.0 bandwidth architecture with each channel split into 2 x USB 3.0 ports.
            • Based on proven Renesas™ USB 3.0 Host Controller.
            • Compliant with USB 3.0 specification Rev.1.0 and Intel xHCI specification Rev. 1.0.
            • Support for USB3 Vision cameras.
            • Dedicated USB power supply allows for long cables.
            • Rugged PCIe/104 form-factor.
            • Universal operation: Type 1 or Type 2 hosts.
            • Supports stack up or stack down configurations.
            • Windows and Linux support.
        • Phoenix Series

            • Phoenix LVDS Frame Grabber (PE4)

              • 36 bit EIA-644 (LVDS) data, 4 bits for control.
              • 4 lane v1.1 PCI Express interface.
              • PCIe burst rates in excess of 750Mbytes/sec.
              • Supports digital areascan / linescan cameras.
              • Multi-tap & multi-channel camera formats, incl. line and pixel interleaved.
              • Maximum pixel clock of 75MHz.
              • PHX SDK supports various operating systems.
              • Bus mastering hardware control requires 0% CPU.
              • Dual channel serial port with both EIA-232 & EIA-644 signalling.
              • Opto-Isolated, TTL and EIA-644 I/O.
              • Utilises software configurable FPGA technology.
              • Common API allows seamless migration for existing Phoenix PCI users.
              • RoHS compliant.
            • Phoenix PCI/104e Camera Link Frame Grabber

              • Single Base, Dual Base or Medium CL Configurations.
              • PCI/104-Express form factor.
              • Universal board to operate in Type 1 or Type 2 host.
              • Single lane (x1) v1.1 PCI Express interface.
              • PCI Express burst rates in excess of 190Mbytes/sec.
              • Power over Camera Link with SafePower.
              • Supports digital areascan / linescan cameras.
              • Multi-tap & multi-channel camera formats, incl. line and pixel interleaved.
              • Maximum pixel clock of 66MHz.
              • Extended temperature operation.
              • PHX SDK supports various operating systems.
              • v2.0 Camera Link compliant.
              • Bus mastering hardware control without CPU intervention.
              • Dual channel serial port with EIA-644 signalling.
              • Supports Camera Link serial comms API.
              • Data Valid (DVAL) for slow data rate cameras.
              • Opto-Isolated, TTL and EIA-644 I/O.
              • Software configurable FPGA technology.
              • RoHS compliant.
            • Phoenix PMC Camera Link Frame Grabber

              • Base Camera Link Configuration.
              • PMC form factor (IEEE P1386.1 standard).
              • 32 bit 33MHz PCI support in 3.3V & 5V signalling environments.
              • Maximum PCI burst rate of 133Mbytes/sec.
              • Supports digital areascan / linescan cameras.
              • multi-tap & multi-channel camera formats, incl. line and pixel interleaved.
              • Maximum pixel clock of 40MHz.
              • Extended temperature operation.
              • PHX SDK supports various operating systems
              • v2.2 PCI and v1.1 Camera Link compliant.
              • Bus mastering hardware control with zero CPU.
              • Serial port with EIA-644 signalling.
              • Supports Camera Link serial comms API.
              • Implements Data Valid (DVAL).
              • Opto-Isolated, TTL and RS-422 I/O.
              • Software configurable FPGA technology.
            • Phoenix 3U cPCI Camera Link Frame Grabber

              • Single Base, Dual Base or Medium Camera Link Configurations.
              • 3U CompactPCI form factor.
              • Optional conduction cooled assembly.
              • 32 bit 66MHz PCI support in 3.3V signalling environments.
              • Maximum PCI burst rate of 266Mbytes/sec.
              • Supports digital areascan / linescan cameras.
              • Multi-tap & multi-channel camera formats, incl. line and pixel interleaved.
              • -40°C to +85°C extended temperature operation.
              • PHX SDK supports various operating systems.
              • v2.2 PCI and v1.2 Camera Link compliant.
              • Support for PoCL including SafePower.
              • Bus mastering hardware control with 0% CPU intervention.
              • Supports Camera Link serial comms API.
              • DVAL for slow data rate cameras.
              • Opto-Isolated, TTL and EIA-644 I/O.
              • Software configurable FPGA technology.
              • Optional rear panel I/O adapter available.
              • RoHS compliant.
            • Phoenix Camera Link Frame Grabber (D48-PE4H)

              • Single Base, Dual Base or Medium Camera Link Configurations.
              • Four lane (x4) v1.1 PCI Express interface.
              • PCI Express burst rates in excess of 750Mbytes/sec.
              • Supports Power over Camera Link with SafePower.
              • Supports digital areascan / linescan cameras.
              • Accepts multi-tap & multi-channel camera formats, including line and pixel interleaved.
              • Maximum pixel clock of 85MHz.
              • Software Development Kit (SDK) supports various operating systems for rapid integration.
              • v1.2 Camera Link compliant.
              • Bus mastering hardware control of scatter-gather requires 0% host CPU intervention.
              • Dual channel serial port with EIA-644 signalling.
              • Supports Camera Link serial comms API.
              • Implements Data Valid (DVAL) for slow data rate cameras.
              • Opto-Isolated, TTL and EIA-644 I/O.
              • RoHS compliant.
            • Phoenix Camera Link Frame Grabber (D24-PE1)

              • Base Camera Link Configuration.
              • Single lane (x1) v1.1 PCI Express interface.
              • PCI Express burst rates in excess of 190Mbytes/sec.
              • Supports Power over Camera Link with SafePower.
              • Multi-tap & multi-channel camera formats, incl. line and pixel interleaved.
              • Maximum pixel clock of 85MHz.
              • PHX SDK supports various operating systems.
              • v1.2 Camera Link compliant.
              • Hardware control of scatter-gather requiring 0% CPU.
              • Serial port with EIA-644 signalling, also accessible as a standard Windows COM port.
              • Supports Camera Link serial comms API.
              • Implements Data Valid (DVAL) for slow data rate cameras.
              • Opto-Isolated, TTL and EIA-644 I/O.
              • Utilises software configurable FPGA technology.
              • Common API allows seamless migration for existing Phoenix PCI users.
              • RoHS compliant.
          • Camera Interface Boards

          • Active Silicon offers a range of interface boards for AutoFocus-Zoom cameras from Tamron, Sony and others. The interface boards take data from the proprietary camera interface and format into industry standard interfaces such as 3G-SDI/HD-SDI, USB 3.0, HDMI and IP. All modules feature very low clock jitter and stable outputs over a wide temperature range and are suited to many applications in broadcast, medical, industrial, security and defense applications.
              • Harrier 3G-SDI Camera Interface Board (75 Ohm)

                • 3G-SDI and HD-SDI interface solution for the Tamron MP1010M-VC and MP1110M-VC cameras.
                • Simultaneous analog video output (PAL/NTSC) in 720p50/60 modes.
                • HD-VLCTM mode for long cable length applications.
                • Ultra-small micro-coax connector (75-Ohm connector).
                • For the MP1110M-VC camera all HD modes are supported, and for the MP1010M-VC all HD modes up to 1080i60/1080p30 are supported.
                • Compliant with SMPTE 274M and SMPTE 296M.
                • Video mode selection switches and built-in test pattern.
                • 3V CMOS/TTL (5V TTL compliant) serial UART comms port for camera control.
                • Interface board may be mounted on the side of the camera, replacing bracket (as shown in product photo).
              • HD-SDI digital interface kit for Sony FCB-EV7520A

                • HD-SDI interface solution for the Sony FCB-EV7520A camera.
                • Also compatible with other Sony FCB cameras of the EV-series.
                • Includes interface module, cables and mounting kit.
                • Uses the camera’s digital output to give optimum image quality.
                • Supports the following HD modes – 1080p at 25, 29.97 and 30Hz, 1080i at 50, 59.94 and 60Hz, 720p at 25, 29.97, 30, 50, 59.94 and 60Hz.
                • Compliant with SMPTE 274M and SMPTE 296M.
                • Video mode selection switches and built-in test pattern.
                • RS-232 communications port for camera control.
                • RoHS compliant.
              • HD-SDI digital interface kit for Sony FCB-EV Series

                • HD-SDI interface solution for the Sony FCB-EV series of cameras.
                • Includes interface module, cables and mounting kit.
                • Uses the camera’s digital output to give optimum image quality.
                • Supports the following HD modes – 1080p at 25, 29.97 and 30Hz, 1080i at 50, 59.94 and 60Hz, 720p at 25, 29.97, 30, 50, 59.94 and 60Hz.
                • Compliant with SMPTE 274M and SMPTE 296M.
                • Video mode selection switches and built-in test pattern.
                • RS-232 communications port for camera control.
                • RoHS compliant.
              • HD-SDI digital interface kit for Sony FCB-EH Series

                • HD-SDI Interfacing solution for the Sony FCB-EH series of cameras.
                • Includes interface board, cables and mounting kit.
                • Uses the camera’s digital output to give optimum image quality.
                • Supports all available HD modes – 1080p, 1080i (PsF), 720p at 25, 29.97, 30, 50, 59.94 and 60Hz.
                • Compliant with SMPTE 274M and SMPTE 296M.
                • Video mode selection switches and built-in test pattern.
                • RS-232 communications port for camera control.
                • Compatible with Active Silicon’s frame grabbers.
                • RoHS compliant.
              • HD-SDI digital interface kit for Sony FCB-EH3150

                • HD-SDI Interfacing solution for the Sony FCB-EH3150 camera.
                • Includes interface board, cables and mounting kit.
                • Uses the camera’s digital output to give optimum image quality.
                • Supports all available HD modes – 1080p, 1080i (PsF), 720p at 25, 29.97, 30, 50, 59.94 and 60Hz.
                • Compliant with SMPTE 274M and SMPTE 296M.
                • Video mode selection switches and built-in test pattern.
                • RS-232 communications port for camera control.
                • Compatible with Active Silicon’s frame grabbers.
                • RoHS compliant.
              • CoaXPress digital interface kit for Sony FCB-H11

                • Single coax solution for interfacing to Sony FCB-H11 or FCB-H10 block cameras.
                • Includes interface board, cables, and bracket.
                • Uses the digital output on the Sony FCB-H11 to give optimum image quality.
                • Supports all HD modes of the FCB-H11 – 1080i and 720p at 50Hz or 60Hz – in real time.
                • Single 2.5Gbps CoaXPress link.
                • Compatible with FireBird CoaXPress frame grabbers with support for various operating systems.
                • Compliant with CoaXPress-TD protocol.
                • RoHS compliant.
            • Embedded Systems

            • Active Silicon designs and manufactures custom embedded systems, often integrating our leading-edge image acquisition technology. Typically, units are designed for a specific OEM application often in the field of medical devices, industrial automation or remote monitoring. Systems are designed to meet various safety, quality and medical standards as appropriate, as well as being designed for long product life – retaining the same fit, form and function for many years.
                • USB3 Vision Processing Unit

                  • Custom COM Express based embedded PC in custom housing.
                  • Intel i7 processor – other options available.
                  • 4 channels of USB 3.0 inputs designed for “USB3 Vision”.
                  • 4 channels of 3G-SDI outputs.
                  • 1 x RS-232 port.
                  • Two internal SSD drives (M.2 SATA).
                  • Standard interfaces for development: 4 x USB 3.0, 1 x GigE, 1 x DisplayPort.
                  • PCIe/104 expansion slot.
                • COM Express Embedded System – LM01

                  • COM Express based embedded PC.
                  • Intel i7 processor – other options available.
                  • Option 4 channels of HD-SDI / 3G-SDI outputs.
                  • 1 x RS-232 port.
                  • Two SSD drives (M.2 SATA).
                  • Standard PC interfaces: 4 x USB 3.0, 1 x GigE, 1 x DisplayPort.
                  • PCIe/104 expansion slot.
                • COM Express Embedded System – CM07

                  • Custom COM Express based embedded PC.
                  • Intel i7 processor – other options available.
                  • 4 x USB3.
                  • 3 x GigE Network (1 supporting POE).
                  • 2 x SATA.
                  • 2 x CAN Bus.
                  • 2 x RS232.
                  • 2 x TTL UARTs.
                  • 1 x DisplayPort
                  • 1 x VGA
                  • PS/2 Keyboard and Mouse
                  • PCI/104-Express expansion slot.
                • Custom Embedded System – TC12

                  • Custom ARM based embedded PC.
                  • Dual DC motor controllers.
                  • 4 x RS-485 ports.
                  • 1 x GigE Network port.
                  • 1 x RS-232.
                  • 1 x custom I/O bus.
                  • Linux operating system.
                • Integrated Camera and Lighting Unit – VC2

                  • Custom controller based on Microchip PIC.
                  • Built-in LED lighting with controller.
                  • Integrated camera and lens.
                  • 1 x RS-232.
                  • 1 x custom bus with real-time signals.
                  • LEDs for operational and service feedback.
                • ETX Embedded System – TC06

                  • ETX processor module (low power Intel Celeron).
                  • Internal CompactFlash drive.
                  • 1 x VGA output.
                  • 2 x USB2.
                  • 1 x GigE network port.
                  • 1 x RS-232.
                  • 1 x RS-485 Motor Controller.
                  • Quadrature phase encoder input.
                  • 10 x Solenoid drive outputs.
                  • Analog image capture with strobe/lighting control.
                  • Keyswitch Service Override.
                  • 120/240 VAC operation.
                  • EN60950 / UL950 certified.
                • Optical Reader – ARH

                  • Standalone sensing device.
                  • Uses 2 x Microchip processors.
                  • 4 x custom sensors with custom lenses.
                  • 1 x RS-485 output.
                  • Machined from solid alloy with gold plated lid.
                  • 3 x LEDs for operational and service feedback.
                • Multi-channel Surveillance System

                  • Custom COM Express based embedded PC.
                  • 1 x DVI-I graphics output.
                  • 2 x GigE network ports.
                  • 2 x SATA ports.
                  • 4 x USB2.
                  • 8 x standard resolution analog video inputs.
                  • 2 x RS-232.
                  • 2 x RS-422.
                  • 1 x RS-485.
                  • 1 x CompactFlash slot.
                  • 3G modem.
                  • Housed unit for outdoor use.
                • COM Express Embedded System – CM04

                  • Custom COM Express based embedded PC.
                  • 1 x DVI-I graphics output.
                  • 2 x GigE network ports.
                  • 2 x SATA ports.
                  • 4 x USB2.
                  • 8 x standard resolution analog video inputs.
                  • 2 x RS-232.
                  • 2 x RS-422.
                  • 1 x RS-485.
                  • 1 x CompactFlash slot.
                • COM Express Embedded System – CM03

                  • Custom COM Express based embedded PC.
                  • 1 x DVI-I graphics output.
                  • 1 x DisplayPort output.
                  • 2 x GigE network ports.
                  • 2 x USB3 ports.
                  • 4 x USB2.
                  • 2 x SATA ports.
                  • 4 x General Purpose I/O lines.
                • Custom Video Streaming Server

                  • Custom embedded video streaming server.
                  • 4 x RS-170/CCIR standard resolution video inputs.
                  • 4 x GigE Ports.
                  • Integrated WiFi.
                  • 9-16V power supply.
                  • FAA certification for use in commercial passenger aircraft.
                • ETX Mini-Embedded System

                  • Custom ETX format embedded system.
                  • Range of low to medium power processor options.
                  • 2 x video inputs (RS-170/CCIR).
                  • 2 x RS-422 ports.
                  • 3 x RS-485 ports.
                  • 3 x Hall effect sensor inputs.
                  • 12 x programmable I/O.
                  • LCD panel driver.
                  • 1 x SATA ports.
                  • 1 x VGA, keyboard, mouse for development.
                • PC/104-Plus Embedded Video Server

                  • Custom embedded video streaming server.
                  • 4 x RS-170/CCIR standard resolution video inputs.
                  • 1 x GigE Port.
                  • Integrated WiFi.
                  • 9-16V power supply.
                  • FAA certification for use in commercial passenger aircraft.
              • Software

              • Active Silicon offers a range of software to support its vision hardware products across several operating systems. There are also drivers for 3rd party machine vision and scientific imaging packages as well as Twain and NetMeeting support. Independent of the hardware we have a variety of other image processing tools such as JPEG and wavelet compression and patented vision algorithms.
                  • ActiveCapture

                  • ActiveCapture is the front-end software for Active Silicon FireBird frame grabbers. It allows the user to access and control cameras and frame grabbers in a clear and intuitive way. It provides a simple and easy way to configure the hardware system, allowing control of various image acquisition features such as triggering, image resolution, etc.

                    • Optimized image acquisition and display.
                    • GenICam application for CoaXPress and Camera Link cameras.
                    • Also for use with non-GenICam Camera Link cameras.
                    • GenICam feature browser and GenTL acquisition control.
                    • Comprehensive image display features such as zoom and color sampler.
                    • Image sequence capture and playback.
                    • High bit-depth color and greyscale histogram functions.
                    • Command line utility for direct register access to the camera for low-level debugging.
                    • Supports TIFF & JPEG image file formats.
                  • ActiveSDK Software Development Kit

                  • Imaging SDK for FireBird frame grabbers

                    • Supports Camera Link and CoaXPress camera interfaces.
                    • Comprehensive library functions and documentation.
                    • Supported environments include 64-bit Windows and Linux as well as macOS and QNX.
                    • Common API across all supported operating systems.
                    • Comprehensive suite of C, C++ and C# example applications with full source code.
                    • GenICam and NVIDIA GPUDirect for Video examples provided.
                    • Libraries are supplied as Windows dynamic link libraries (.dll), Linux shared object (.so) libraries and macOS Frameworks.
                  • LFG Software Development Kit

                  • Imaging SDK for Analog Frame Grabber
                    • SDK support for Active Silicon’s LFG frame grabbers.
                    • Designed for OEM integration.
                    • Supports various operating systems.
                    • Licence for TMG Imaging Library included.
                  • GenICam Support

                    • GenTL Producer for FireBird CoaXPress and Camera Link frame grabbers.
                    • Compatible with CLProtocol and GenCP cameras.
                    • Develop hardware independent applications.
                    • Easily migrate from GigE Vision or USB3 Vision applications to high speed Camera Link and CoaXPress solutions.
                    • Confidence Test application provided to check that the system is GenICam ready.
                    • Fully featured GenICam Consumer application (“ASDemo”) provided.
                  • GPUDirect for Video

                    • Supported GPUs: Quadro; GRID; Tesla; click here for full list.
                    • Operating system – Windows 7/8/10 64 bit or Linux 64-bit.
                    • Supporting API – CUDA, OpenCL™, OpenGL®, DirectX®.
                    • NVIDIA cards offer from 8 to over 5000 CUDA Cores, offering a range of processing power.
                  • DirectGMA

                    • Supported GPUs: FirePro W™ W5x00 and above; FirePro™S series.
                    • Operating system – Windows 7/8/10 64‑bit or Linux 64-bit.
                    • Supporting API – OpenCL™, OpenGL®, DirectX®.
                    • AMD graphic cards support STREAM technology, which uses OpenCL cross-platform programming standard.
                  • LabVIEW Driver

                    • Compatible with all FireBird interface cards.
                    • Access to frame grabber functionality from within LabVIEW.
                    • Easy snap/grab of images.
                    • Provides interface to frame grabber SDK.
                  • Frame Grabber Drivers for Cognex VisionPro®

                    • All FireBird Camera Link and CoaXPress frame grabbers supported.
                    • Selected Phoenix Camera Link, HD-SDI and LVDS frame grabbers supported.
                  • Third Party Applications

                    • Adaptive Vision Studio and Library (Adaptive Vision)
                    • Common Vision Blox (Stemmer Imaging)
                    • EyeMotion (See Fast Technologies)
                    • HALCON (MVTec)
                    • M3 (Metlogix)
                    • nVISION (di-soric Imaging)
                    • Streampix (Norpix)