Hirata Engineering Europe
Loading the player ...
- From stand-alone robot to entire customized system –
your way to your solution
Hirata has not only offered stand alone
robots since 1978, but also conveyors, feeders and entire suitable robotized
We create optimum automatic systems for your needs providing full technical
and engineering support. We are planning, designing and building the system.
Finally our automation experts are ready to install the system and to teach
Do you have a current project for automation – don’t hesitate to contact us.
For some typical requirement we have semi-standardized solutions like
soldering robots, palletizer and insertion robots for odd shaped
Feed in and feed out of unmachined and machined housing
parts of mobile phones
- Do you have a task of palletising or depalletising,
which you want to automize?
Our palletiser can work with different tray types as deep drawn or foam
plastic material or sheet metal. We are offering the entire Engineering
including robot technology, grippers and other feeders.
||2 x AR-S270
|Tray feeder model:
||400 mm x 300 mm
||plastics, deep drawn, 0,7 mm thick
||3.0s each work piece
The system consists out of two tray feeders and two SCARA robots. The
tray feeders are linked together with a conveyor of the pile of empty trays.
Additionally the tray feeder is equipped with buffer segments in order to
increase the buffer capacity.
The deep draw trays are made out of very thin material which pose a great
challenge. Because the trays cannot be fixed by form fit but it have to be
fixed through vacuum grippers.
||400 mm x 300 mm, 540 mm x 360 mm
||plastics, deep drawn, 1,2 mm thick
||2,8s each workpiece
The system consists of a twin tray feeder and a SCARA robot between.
Each feeder is designed for a certain tray size because the tray size of the
raw parts is 400 mm x 300 mm and the try size of the finished parts is 540
mm x 360 mm. Furthermore the system is equipped with a vision system to
correct the place positions of the robot at the work piece conveyor.
Automated measurement within production
- System specifications
|Tray feeder model:
||400 mm x 300 mm
||deep drawn plastic
||16s each work piece
The robot handles the work piece and places it into the test jig. During
testing the robot places the tested work piece into the tray and picks up a
new untested piece.
- One of our main application area is Assembly. Basically we are specialize to handle work pieces with a volume of 100 mm x 100 mm x 100 mm and a weight of less then 5 kg. The cycle time of one piece handling is within 2 to 30 s and the accuracy of insertion is +/- 0.05 mm.
Adhesive bonding and Adhesive potting
- In case of dispensing of adhesive we differ between
Potting and bonding/Beading. For both processes we are offering solutions
for 1K and 2K material and are using well known dispenser makers.
For poisitioning the dispenser head we are using Cartesian robots because of
high path accuracy and higher payload. Also piping from pump to dispenser is
much easier then other robot mechanism.
Measurement and Testing
- An important process is measurement and testing within
production. You can handle either the work piece by robot to bring it to the
test equipment or robot can carry the probe and bring it to the work piece.
Odd shaped component insertion
- For automatic production systems a parts feeder to robot
is one of an important element. If orientation and position of work pieces
are not accurate, automatic system will not run efficiently. Frequently,
sensitive or odd-shaped parts are not suitable for bowl feeders and vision
systems will not be economical solution. These parts should be presented by
trays which are available in the market and easy to transfer a reuse.
Hirata’s Auto Stocker solves your tray feeding problem economically. The
Auto Stocker is designed as tray changing system to palletize or depalletize
work pieces by robot. Its accurate positioning, fast tray change time and
sufficient storage of trays meet the requirement of your automatic
production system. The typical applications for the Auto Stocker are for
assembly operation, palletizing for injection moulding machines and
loading/unloading work pieces for machine tools.
- High Efficiency:
The palletizer in combination with SCARA robot or Gantry robot is able to
load or unload trays. Tray feeders for tray dimensions between 300 mm x 200
mm up to 800 mm x 600 mm are available. The maximum of tray stack weight
could be 200 kg.
- Small footprint: The tray feeder model AST has a very small footprint and save a lot of
factory space because the tray flow is vertically.
- Full automation: In combination with a AGV tray feeders can be load and unload automatically.
The robot models of AR-F series are four axes SCARA robots which are
very well suitable for fast and flexible assembly and handling
tasks. The AR-F series is the sixth generation of SCARA robot which
Hirata developed and perform newest technology and long lasting
experiences. Best features and high economy are characterizing these
robot series. There are three models with different arm length of
450 mm, 500 mm and 650 mm available.
- High acceleration and speed: The AR-F series perform a standard cycle time of 0.28 s.
- Battery less encoder technology: Battery less Encoders makes maintenance easy and conserves
- Automatic acceleration calculation: Optimized motion by automatic calculation of acceleration
and deceleration time.
Semiconductor production equipment
The development and manufacturing of the clean room robots based on
the long and detailed experiences of Hirata’s robot technology.
These robots can be easily and very efficiently integrated into
automatic semiconductor machine. The robots are conform with
mandatory SEMI standards.
- Small foot print:
Therefore no disturbance of laminar air flow inside of clean room.
- Optimized Motion features:
Therefore higher throughput possible.
- Optional Flap device:
With optional flap device wafer can be turned upside down.
- Maintenance less robot arm:
No greasing, low maintenance cost
EFEM’s – Equipment Front End Modules are turn key wafer handling
units consist of robot, pre-aligner, load ports and machine housing.
The design and functions are adapted to customer’s requirement.
- High Throughput
- Small foot print
- Certified according ISMI 2009
Wafer can be centred and orientated by Hirata’s pre-aligner.
- Touchless and sensor controlled
- Very quick and high precisely orientation of standard and notch
- For wafer sizes selectable: 6”, 8”, 12” and 8”/12”
Our FOUP openers are designed for handling of FOUP (Front Opening
Unified Pods) and FOSB (Front Opening Shipping Boxes) and are
available for wafer size 8” and 12”.
- Reliable opening and closing of FOUP and FOSB
- Integrated mapping function
For wafer sizes 8”, 12” and 18”
A building block system of different linear axes offers a great
variation of possible axis configuration and combination. These
robots are mainly used for working tool and work piece handling..
- Solid and robust structure:
Reliable and long-lasting operation
- Batteryless Encoder technology:
Batteryless Encoders makes maintenance easy and conserves the
- Various possibilities of configuration:
many selections in strokes, speed and payload
linear axis for horizontal mounting position
linear axis for vertical mounting position
2 axes CR type
X-Y system fixing Y axis frame to X axis slider
X-Y system with mobile Y axis at X axis slider
MV, MZC, MZF
X-Z system with vertical stroke > 300, 500, 700 mm
X-Z system with vertical stroke 200 or 350 mm
3 axes CRZC type
X-Y-Z system with vertical stroke > 300, 500, 700 mm
X-Y-Z system with vertical stroke 200 or 350 mm
X-Z-W system with wrist axis and vertical stroke 200 or 350 mm
X-Y-Z-W system with vertical stroke 200 or 350 mm
- The Gantry robots with three axes are configurable
according customer’s need. These robots are able to carry heavy load and
have long stroke option. They are very robust and have a high stability.
Solid and robust structure: Low maintenance, payload 50 to 150 kg
Batteryless Encoder technology: Batteryless Encoders makes maintenance easy
and conserves the environment.
Various possibilities of configuration: many
selections in strokes, speed and payload.
Assembly Cell ACS-MD is a modular structured production
system for manufacturing of small electrical and electronic
devices and units. These cells can be used as a standalone
machine or can be combined together to an entire production
Controller and software for robots and handling devices
The controller provides all functions of a motion control
and the ability to control the entire peripheral devices.
Thereby it is not necessary to use a PLC for sequence
control. The controller is a micro processor system which is
working with multi tasking.
The Teach pendant can be connected to all control models. It can be
used for operation and position programming of robots. The Teach
pendant can be connected and disconnected if required.
The software package HBDE (Hirata BASIC Development Enviroment) are
used to develop application software and for debugging of programs.
The programming language is based on BASIC and very easy to learn.
It provides structured programming, subroutines, Marco commands and
a lot of powerful commands.