Navigation : EXPO21XX > FLUID 21XX > H03: Hydraulic Tools > BETEX ®HYDRAULIC POWER
BETEX ®HYDRAULIC POWER
Videos
Loading the player ...
  • Offer Profile
  • Bega Special Tools was founded in 1978. Bega is manufacturer and distributor of Special Tools for safe, cost effective mounting and dismounting of bearings and transmission parts. The tools are used in production and maintenance departments in MRO and OEM companies. Bega exports to over 60 countries and serves all types of industries. With special solutions in for instance Wind, Rail, Mining and Steel industry.

    With our Special Tools we aim to improve the quality of maintenance and installation of rotating parts in machines, thus obtaining a longer lifespan.
Product Portfolio
  • Industrial Hydraulic Equipment (700-2800 bar)

      • Betex Cylinders 700 bar

          • JLLC cylinders, high tonnage, single acting, load return

          • CYLINDERS WITH LOCK NUT

            BETEX CYLINDERS JLLC series, high tonnage, single acting, load return

            Capacity : 50-1000 tons.
            Stroke : 50-300 mm.
            Max. working pressure : 10,000 psi / 700 bar

            • Single-acting, load return
            • Safety locknut for mechanical load holding
            • Stop ring for piston blow-out protection
            • Interchangeable, hardened, grooved saddle as standard
            • High flow coupler and dust cap included on all models
            • Rams inside roll-polished, outside blasted with black nitride finish
             
          • JLPC cylinders, high tonnage, single acting, load return, compact

          • CYLINDERS WITH LOCK NUT

            BETEX CYLINDERS JLPC SERIES, high tonnage, single acting, load return, compact

            Capacity : 60-1000 t
            Stroke : 50-300 mm
            Max force : 10,000 psi / 700 bar

            • Extremely low height for use in confined areas
            • Single-acting, load return
            • Safety locknut for mechanical load holding
            • Stop ring for piston blow-out protection
            • Interchangeable, hardened, grooved saddle as standard
            • High flow coupler and dust cap included on all models
            • Rams inside roll-polished, outside blasted with black nitride finish
          • ALNC cylinders, aluminium, single acting, load return

          • LIGHT WEIGHT ALUMINIUM CYLINDERS, WITH LOCK NUT

            BETEX ALNC series, single acting, load return

            Capacity : 50 - 100 tons
            Stroke : 50 - 250 mm
            Max force : 10,000 psi / 700 bar

            • Half the weight of steel cylinders
            • Locknuts offer extended load holding
            • Carrying handles standard on all models
            • Heavy duty spring for fast & full return
            • Cylinders inside are roll-polished
            • Black hard-anodized coating reduces wear and corrosion.
          • ACHC cylinders, aluminium, hollow, single acting

          • BETEX ACHC serie, hollow, single acting, spring return

            Capacity : 30 - 60 tons
            Stroke : 50 - 150 mm
            Max. force : 10,000 psi / 700 bar

            • Half the weight of steel cylinders
            • Heavy duty spring for fast & full return
            • Chrome plated centre hole for extra protection
            • Large bearing surfaces for side load protection
            • Carrying handles standard on all models
            • Hard-anodized coating reduces wear & corrosion
            • Stop rings for piston blow-out protection
            • Rod wiper protects inner cylinder from dirt
          • ADHC cylinders, hollow, double acting

          • BETEX ADHC series, hollow, double acting

            Capacity : 30-60 tons.
            Stroke : 50-250 mm.
            Max. working pressure : 10,000 psi / 700 bar

            • Half the weight of steel cylinders
            • Steel piston for protection against load damage
            • Chrome plated centre hole for extra protection
            • Carrying handles standard on all models
            • Hard-anodized coating reduces wear & corrosion
            • Stop rings for piston blow-out protection
            • Rod wiper protects inner cylinder from dirt
            • Rams inside roll-polished, the black hard-anodized coating reduces wear and corrosion.
          • NSSS cylinders, standard, single acting, spring return

          • BETEX NSSS series - single acting, spring return

            Capacity : 5 - 100 tons
            Stroke : 25.4 - 362 mm
            Max. working pressure : 700 Bar / 10,000 psi

            • All cylinders are single-acting with spring return
            • Hard chromed piston
            • Rams inside roll-polished, outside blasted with black nitride finish

            Pump and cylinder sets:
            All cylinders are available as sets (cylinder, gauge, couplers, hose and pump) for your ordering convenience
          • NSHS cylinders, hollow, single acting, spring return

          • BETEX NSHS series, center hollow, single acting, spring return

            Capacity : 12 - 100 tons
            Stroke : 8 - 158 mm
            Max. operating pressure : 700 bar / 10,000 psi

            • All rams are single-acting with spring return
            • Hard chromed piston
            • Rams inside roll-polished, outside blasted with black nitride finish
          • NSLS cylinders, flat, single acting, spring return

          • BETEX NSLS Series, low height, spring return, single acting

            Capacity : 5 - 150 ton
            Stroke : 6 - 17 mm
            Max. operating pressure : 700 bar / 10.000 PSI

            • All rams are single acting with spring return
            • Hard chromed piston
            • Rams inside roll-polished, outside blasted with black nitride finish
          • NSCS cylinders, compact, short stroke, single acting, spring return

          • BETEX NSCS series, short stroke, single acting, spring return

            Capacity : 10 - 100 ton
            Stroke : 38 - 62 mm
            Max. operating pressure : 700 bar / 10.000 PSI

            • All rams are single acting with spring return
            • Hard chromed piston
            • Rams inside roll-polished, outside blasted with black nitride finish
          • SSA cylinders, light weight aluminium, single acting, spring return

          • BETEX SSA-Series, single acting, spring return

            Custom stroke lengths and capacities are available

            • 8 standard models available for 50 to 100 tons
            • Up to 60% lighter than steel cylinders
            • Heavy duty spring for easy and full retraction
            • Large saddle surface for angle load protection
            • High-flow quality couplers
            • All models are provided with carry handles
            • Rod wiper protects inner rod from dirt
            • Hard-anodized housing and piston reduce wear and corrosion
            • Rams inside roll-polished, the black hard-anodized housing reduces wear and corrosion.
          • NDAC cylinders, double acting

          • BETEX NDAC Series - double acting

            Capacity : 10 - 100 tons
            Stroke : 150 - 470 mm
            Max operating pressure : 10,000 psi - 700 Bar

            • Perfect for construction, shipyards, utilities, mining and maintenance workshops
            • Hard chromed piston
            • Rams inside roll-polished, outside blasted with black nitride finish
          • NDAH cylinders, hollow, double acting

          • BETEX NDAH Series, double acting

            Capacity : 30 - 100 ton
            Stroke : 76 - 257 mm
            Max operating pressure : 10,000 psi - 700 Bar

            • Perfect for construction, shipyards, utilities, mining and maintenance workshops
            • Hard chromed piston
            • Rams inside roll-polished, outside blasted with black nitride finish
        • Betex hand pump sets

            • BETEX ALUMINIUM HAND PUMP SETS

            • All sets are ready-for-use, you can start working right away!

              All pumps are:
              • single acting (except AHP703, double-acting)
              • two-stage

              Our HAND PUMP SETS, include:
              • aluminium hand pump
              • T-adaptor
              • gauge
              • hose 1,8 mtr.
              • couplings
              • steel storage case
            • BETEX STEEL HAND PUMP SETS

            • BETEX STEEL HAND PUMP SETS

              All sets are ready-for-use, you can start working right away!

              All pumps are:
              • single acting
              • two-stage

              Our HAND PUMP SETS, include:
              • steel hand pump
              • T-adaptor
              • gauge
              • hose 1,8 mtr.
              • couplings
              • steel storage case
            • BETEX HIGH PRESSURE HAND PUMP SETS

            • BETEX HIGH PRESSURE HAND PUMP SETS

              All sets are ready-for-use, you can start working right away!

              All pumps are:
              • single acting
              • two-stage

              Our HAND PUMP SETS, include:
              • aluminium hand pump
              • T-adaptor
              • gauge
              • hose 1,8 mtr.
              • couplings
              • steel storage case
          • Betex Hand pumps

              • BETEX AHP701/702/703/703D ALUMINIUM HAND PUMPS

              • BETEX AHP SERIES - ALUMINIUM HAND PUMPS, 700 BAR

                • Our 2-speed hand pumps are always characterized by their rugged construction and easy-operation handles.
                • Aluminium alloy construction and handy release knobs with locking mechanism are perfect for industrial applications and daily operations.
                • Special lightweight design with aluminium alloy construction makes for an easily portable and mobile unit.
                • Double-acting design on AHP703D is ideal for double-acting cylinders without the need for extra controlling valve and adaptors.
                • Automatic 10,000 psi overload-relief valve protects components in hydraulic systems and ensures safe operation
              • BETEX HP35 STEEL HAND PUMP HEAVY-DUTY

              • BETEX HP35 SERIES - STEEL HAND PUMPS, HEAVY-DUTY, 700 BAR

                • Our handpumps are always characterized by their rugged steel construction and easy-operation handles
                • The handy release knobs with locking mechanism are perfect for industrial applications and daily operations
                • Light weight design, easy to handle
                • Specially designed HP35D is for double-acting cylinders without the need for extra controlling valve and adapters
                • Automatic 10,000 psi overload-relief valve protects components in hydraulic systems and ensures safe operation
              • BETEX PB/HC/P STEEL HAND PUMPS HEAVY DUTY

              • BETEX PB / HC / P- SERIES - STEEL HAND PUMPS, HEAVY-DUTY, 700 BAR

                • Betex heavy duty hand pumps feature a forged construction made of steel
                • The drop-forged base and rugged welded construction effectively prevents collision damage and deformation
                • The professional choice for a wide range of industrial applications
                • Internal overload valve prevents pump from being used beyond its rated capacity
                • Two-speed pumps provide rapid pumping to load the cylinder quickly
                • External adjustable relief valve with locking mechanism
                • Carrying handles for easy portability
              • BETEX HP80 STEEL HANDPUMP HEAVY-DUTY

              • BETEX HP80 SERIES - STEEL HAND PUMPS, HEAVY-DUTY, 700 BAR

                • Rugged construction made of steel
                • Automatic 10,000 psi overload-relief valve protects components in hydraulic systems and ensures safe operation
                • New inlet/outlet design features slow deflation function reducing noise, and allows multidirectional operation
                • Two-speed pumps provide rapid pumping to load the cylinder quickly

                Specially designed HP80D is for double-acting cylinders without the need for extra controlling valve and adapters
            • Betex Foot pumps

                  • BETEX FHB FOOT PUMP

                  • BETEX FHB SERIES - FOOT PUMPS, 700 BAR

                    • Betex® innovative foot pumps are not only attractively designed, but are also durable and stable
                    • Foot-operated pump and release pedal, providing accurate control for operating in different conditions
                    • Spring-loaded foot pedal is convenient and easy to operate
                    • Automatic 10,000 psi overload-relief valve protects components in hydraulic systems and ensures safe operation
              • Betex Air pumps

                  • BETEX AP921 FOOT PUMP

                  • BETEX AP921 - AIR-HYDRAULIC FOOT PUMP, 700 BAR

                    • The air-driven hydraulic pump is designed for use with single-acting cylinders and tools like the Betex cylinder serie
                    • Rugged construction: most components are made of aluminium alloy and are built for long service life, easy operation and portability
                    • Automatic 10,000 psi overload-relief valve protects components in hydraulic systems and ensures safe operation
                    • New inlet/outlet design features slow deflation function reducing noise, and allows multidirectional operation
                  • BETEX AP1600/3000 FOOT PUMPS

                  • BETEX AP1600/3000 SERIES AIR/HYDRAULIC PUMPS, 700 BAR

                    • The air-driven hydraulic pump is designed for use with single-acting cylinders and tools like the Betex cylinder serie
                    • Rugged construction: most components are made of aluminium alloy and are built for long service life, easy operation and portability
                    • Automatic 10,000 psi overload-relief valve protects components in hydraulic systems and ensures safe operation
                    • New inlet/outlet design features slow deflation function reducing noise, and allows multidirectional operation
                    • The AP1600D + AP3000D-models are specially designed for double-acting cylinders without the need of an additional control valve and connecting pieces
                  • BETEX AP8000 AIR PUMPS

                  • BETEX AP8000 SERIES AIR PUMPS, 700 BAR

                    • Two speed operation for fast speed cylinder advance
                    • 8 Liter durable aluminium reservoir
                    • Air motor capable of starting under full load
                    • Automatic 10,000 psi overload-relief valve protects components in hydraulic systems and ensures safe operation
                    • Specially designed AP8000D is for double-acting cylinders without the need for extra controlling valve and adapters
                • Betex Electric pumps

                    • BETEX EP13 ELECTRIC PUMPS 3L

                    • BETEX EP13 SERIES - ELECTRIC HYDRAULIC PUMPS, 3L -
                      700 BAR

                      • Electric pump 400V, 5A, 50/60 Hz universal induction motor, thermal protected
                      • Very quiet (about 80dBA at 700 Bar)
                      • Remote control incl cord (3m)
                      • Automatic overload-relief valve (700 bar) protects components in hydraulic systems and ensures safe operation
                      • Specially designed EP13D is for double-acting cylinders without the need for extra controlling valve and adapters
                    • BETEX EP18 ELECTRIC PUMPS 8L

                    • BETEX EP18 SERIES - ELECTRIC HYDRAULIC PUMPS, 8L
                      700 BAR

                      • Electric pump 230V, 10A, 50/60 Hz universal induction motor, thermal protected
                      • Very quiet (about 80dBA at 700 Bar)
                      • Remote control incl cord (3m)
                      • Automatic overload-relief valve (700 bar) protects components in hydraulic systems and ensures safe operation
                      • Specially designed EP18D is for double-acting cylinders without the need for extra controlling valve and adapters
                      • Type EP18SS and EP18DS are fitted with a solenoid valve
                    • BETEX EP211 ELECTRIC PUMPS 11L

                    • BETEX EP211 SERIES - ELECTRIC HYDRAULIC PUMPS, 11L -
                      700 BAR

                      • Electric pump 230V, 12A, 50/60 Hz universal induction motor, thermal protected
                      • Very quiet (about 80dBA at 700 Bar)
                      • Remote control incl cord (3m)
                      • Automatic overload-relief valve (700 bar) protects components in hydraulic systems and ensures safe operation

                      Specially designed EP211D is for double-acting cylinders without the need for extra controlling valve and adapters
                      Type EP211SS and EP211DS are fitted with a solenoid valve
                    • BETEX EP320 ELECTRIC PUMPS 20L

                    • BETEX EP320 SERIES - ELECTRIC HYDRAULIC PUMPS, 20L -
                      700 BAR

                      • Electric pump 400V, 5A, 50/60 Hz universal induction motor, thermal protected
                      • Very quiet (about 80dBA at 700 Bar)
                      • Remote control incl cord (3m)
                      • Automatic overload-relief valve (700 bar) protects components in hydraulic systems and ensures safe operation
                      • Specially designed EP320D is for double-acting cylinders without the need for extra controlling valve and adapters
                    • BETEX EP420 ELECTRIC PUMPS 20L

                    • BETEX EP420 SERIES - ELECTRIC HYDRAULIC PUMPS, 20L -
                      700 BAR

                      • Electric pump 400V, 6A, 50/60 Hz universal induction motor, thermal protected
                      • Very quiet (about 80dBA at 700 Bar)
                      • Remote control incl cord (3m)
                      • Automatic overload-relief valve (700 bar) protects components in hydraulic systems and ensures safe operation
                      • Specially designed EP420D is for double-acting cylinders without the need for extra controlling valve and adapters
                  • Betex Workshop presses

                      • BETEX SHOP PRESSES 10T

                      • BETEX WORK SHOP PRESSES 10 TONS

                        Professional workshop presses

                        • Tonnage: 10 ton, stroke: 250 mm
                        • Robust steel frame and steel crossbars ensure maximum stability and prevents bending when loaded
                        • Multiple working positions for press bed
                        • Includes gauge for precise control of the press force
                        • The single acting spring return cylinder is horizontally moveable on the upper frame
                        • Also available with hand- electric- or air-hydraulic pump
                        • Including adaptors and accessories
                        • Also available in following models: 25, 50 & 100 tons
                      • BETEX SHOP PRESSES 25T

                      • BETEX WORK SHOP PRESSES 25 TONS

                        Professional workshop presses

                        • Tonnage: 25 ton, stroke: 250 mm
                        • Robust steel frame and steel crossbars ensure maximum stability and prevents bending when loaded
                        • Multiple working positions for press bed
                        • Includes gauge for precise control of the press force
                        • The single acting spring return cylinder is horizontally moveable on the upper frame
                        • Also available with hand- electric- or air-hydraulic pump
                        • Including adaptors and accessories
                        • Also available in following models: 10, 50 & 100 tons
                    • Betex Jacks

                        • BETEX TOE JACKS

                        • BETEX TOE JACKS

                          • heat-treated and chrome-plated hydraulic rod provides longer seal life and optimal performance
                          • internal safety valve prevents toe jack being used beyond its rated capacity
                          • leakages are prevented by welding the housing onto the forged base
                          • strong toe lift for long service life
                          • low toe heights for tight spaces
                          • swivel sockets for easy operation
                          • toe jacks can be operated quickly by hand without a load
                          • removable handle makes unit easier to operate
                        • BETEX CJ CYLINDERS

                        • BETEX CYLINDERS - CJ series

                          Capacity : 10 or 20 tons
                          Stroke: 41 mm
                          Max. working pressure: 10,000 psi / 700 bar

                          • Spring-loaded
                          • Piston hard chromed
                          • Ram inside roll-polished
                          • Perfect for jobs with limited space, like positioning machines, mounting tools or load tests
                      • Betex Nutsplitters

                            • BETEX NUTSPLITTERS

                              • Compact design used in confined space with enough force to split rusted nuts
                              • All models feature a rugged one-piece cutting frame coupled to a heavy-duty hydraulic cylinder
                              • Specially designed "tool steel" cutter blade cuts the nut to the precise point where it cracks
                              • Unique angled head design to keep full contact with the nut being penetrated
                              • Unique angled cutter blade with radius to have greater resistance to cutting and breaking nuts
                              • 5 popular models applicable to cover the largest range of nut sizes
                        • Betex Spreaders and Lifters

                            • BETEX PORTABLE POWER KITS

                            • PORTABLE POWER KITS

                              Available in 2 types:
                              • Set PPK 4, including 4 tons cylinder, 100 mm stroke in handy carrying case
                              • Set PPK 10, including 10 tons cylinder, 150 mm stroke, in handy carrying case on wheels

                              Advantages:
                              • "Snap-on" design for quick and easy assembly and disassembly
                              • Extra thick extension rods designed for strength prevent bending
                              • Single acting pump, 700 bar with safety valve to prevent overloading
                              • Flexible hydraulic hose, 1,8 mtr
                              • Versatile through many different accessories!
                              • All parts are made of forged steel
                            • BETEX HYDRAULIC SPREADER / LIFTER

                            • Loads are lifted perpendicularly!

                              • Ideal for numerous industrial maintenance repair jobs.
                              • Accurate height adjustments (for instance shaft alignment) can easily be executed by one person.
                              • Easy, light and very practical to use.
                              • Particularly suitable when available space is very limited.
                              • Suitable for spaces of 5 to 43 mm.
                              • Due to the reduced thickness of the jaws, made of high quality hardened steel, these multi-functional wedges can be used for jobs where working space is extremely limited.

                              Various combination sets* available in handy carrying case, including:
                              • hydraulic spreader/lifter
                              • leight weight hand pump
                              • hose, 1.8 mtr
                              • pressure gauge
                              • T-adapter
                              • male (hose) half coupler
                              • complete quick coupler
                          • Betex Mobilift adjustable workbench

                                • BETEX MOBILIFT

                                • BETEX MOBILIFT - mobile lifting tables - 400 KG and 1000 KG

                                  • Betex mobile lifting tables can be supplied in 2 models.
                                  • The height can be adjusted using an hydraulic foot pump and cylinder, complete with a lockable valve that prevents the table from collapsing too quickly, even if the hose breaks.
                                  • With CE marking!

                                  Suitable as mobile workbench: promotes occupational ergonomics.
                            • Dismounting

                                • Mechanical tools

                                    • BETEX 44 HYDRAULIC MINI PRESS

                                    • Betex Pulling Tools

                                      • All pullers are made of high alloy steel
                                      • The method used in manufacturing the screw enhances their quality and increases their durablity
                                      • Safe and effective to work with
                                      • These tools are intended for universal and special applications
                                    • BETEX 46 MECHANICAL PULLERS

                                    • Simple, handy 2-arm puller for parts gripped externally like pulleys, bearings, rings, etc. Suitable for removing fans from electric motors.

                                      During operation the arms cannot slip because they are pressed against the cross bar. The higher the necessary pulling force, the stronger the arms are pressed against the cross bar.
                                      The one-hand operation of the puller permits easy use even under unfavourable conditions.
                                      A spring inside the housing guarantees a continual clamping of the forged alloy steel arms.
                                    • BETEX 47 2-ARM BEARING PULLERS

                                    • Patented special 2-arm bearing pullers

                                      This bearing puller is particularly suitable for extracting bearings, bearingrings etc. that fit flushly with other parts.
                                      This system is generally applied when dismantling bearings from anchors, pump shafts etc.
                                    • BETEX 48/49 2/2 BEARING SPLITTERS AND PULLERS

                                    • 2/2 bearing splitters and pullers
                                      BETEX 48/49 is designed for dismantling flush-fitting bearings and other parts where an ordinary puller would be unable to get a proper grip. Suitable for various applications.
                                    • BETEX 625/630 SHAFT PROTECTORS

                                    • Shaft protector sets for shaft centers and hollow shafts

                                      These shaft protectors are indispensable between shaft and bearing-puller while dismantling bearings, couplings etc.
                                      There are two types:
                                      • 625 for protecting shaft centers
                                      • 630 for hollow shafts.

                                      Use of shaft protectors prevent distortion to the shaft centers and the screw.
                                    • BETEX 52 SELF-CENTERING 3-ARM PULLERS

                                    • Patented self-centering 3-arm pullers (mechanical and hydraulic) for diameter Ø40 mm till Ø640 mm

                                      The 3 arms of these pullers adjust themselves simultaneously and symmetrically, inwards or outwards. There is no possibility of the arms bending or deflecting.
                                      Hydraulic screws with a 20 ton capacity are available for use in combination with the two largest pullers.
                                      The thread of the screws is in no way affected by the building up of hydraulic pressure, thus keeping wear and tear to the screws down to a minimum.
                                    • BETEX 54 2-ARM PULLERS

                                    • Patented 2-arm pullers for diameter Ø40 mm till Ø350 mm

                                      This 2-arm puller is extremely well-suited to applications involving the extraction of bearing-rings, innerrings (NU-NJ).
                                      Reversal of the arms makes internal dismantling also possible. The self-locking system guarantees that the arms will not deflect. Extended and extra-extended arms can be supplied for long shafts.
                                    • BETEX 56 4 -ARM BEARING PULLERS

                                    • Internal 4-arm bearing pullers with interchangeable claws (in case) for total 66 bearings till Ø105 mm)

                                      This four-arm bearing puller has been specially developed to extract ball-bearings from casings and shafts using a single action. This concerns the 6000, 6200, 6300 and 6400 series.
                                      66 different ball-bearings can be removed with these three sets of pullers.
                                    • BETEX 62 EXPANDERS

                                    • Internal expander-puller up to a bore of Ø 150 mm

                                      This special expander system has been developed to facilitate rapid and effective dismantling under difficult conditions, in blind holes.
                                      The multiple adjustable jaws (up to 6) ensure the correct grip from behind the bearing, bush etc. Bearings, bushes, sealings etc. are extracted effortlessly.
                                      Smaller, larger and longer sizes are available on request.
                                    • BETEX MSP 2/3-ARM MECHANICAL PULLERS

                                    • Self-centering, ergonomic design, easily operated by one person!

                                      Practical:
                                      Self-centering two or 2/3-arm puller with self-locking system.
                                      Easy to convert and easy to use in every position.

                                      Safe:
                                      The 2 arms adjust themselves simultaneously, either inwards or outwards. Self-locking system guarantees arms neither bend nor deflect.

                                      Economical:
                                      2/3-arm combination puller. Two pullers for the price of one.

                                      Strong:
                                      The greater the pulling force, the tighter the jaws grip the object concerned.

                                      Advantages of self centering pullers:
                                      Prevent damage to shaft and object being pulled.
                                      Work efficient and save time.
                                    • BETEX KZZ PATENDED KEY PULLER

                                    • For professional removal of keys

                                      The Betex KZZ Key-puller is used for the safe removal of keys from the shafts of any type of machine, motor, blower, compressor, etc.
                                      For keys from 5 mm to 35 mm in width.

                                      Safe:
                                      You no longer need a hammer and chisel.

                                      Advantages:
                                      • Safe removal.
                                      • Fast removal.
                                      • Perpendicular removal.
                                      • No damage to shafts or keys.
                                      • Shafts remain straight.
                                      • Saves time, labour and costs.
                                      • Suitable for max. 35 mm width.
                                  • BETEX Hydraulic pullers

                                      • BETEX HP PULLERS

                                      • ETEX HP 2/3 ARM PULLER with integrated pump and cylinder in pratical PE case

                                        Compact, ergonomic design, easily operated by one person!

                                        Multifunctional:
                                        These HP-pullers are ideal for pulling a wide variety of parts, including bearings, bushings, wheels, gears and pulleys. Applications for HP-pullers will be found in motor repair shops, service companies, maintenance shops, industry, mining, paper mills, chemical plants, shipping, offshore, etc.

                                        Compact:
                                        The self contained hydraulic pump and cylinder save space, as you don’t need a separate pump, hose or puller.
                                      • BETEX HSP PULLERS

                                      • BETEX HSP self-centering 2/3 ARMPULLER with integrated pump and cylinder in practical PE case

                                        Compact, ergonomic design, easily operated by one person!

                                        Practical!
                                        Self-centering, easy to convert, 2-arm or 3-arm puller. The arms slide inwards or outwards simultaneously.

                                        Compact!
                                        The self contained hydraulic pump and cylinder save space, as you don’t need a separate pump, hose or puller.
                                      • BETEX HXP PULLERS

                                      • BETEX HXP hydraulicself-centering pullers2/3 ARM PULLER with seperate 2-stage hand pump, in practical case.

                                        Safe and easy dismounting of bearings, couplings, rings etc.
                                        Separate 2-stage hand pump available.(option)

                                        Practical:
                                        Self-centering, easy to convert, 2-arm or 3-arm puller.
                                        The arms slide inwards or outwards simultaneously.

                                        Safe:
                                        Arms can never deflect!

                                        Economical:
                                        2/3-arm combination puller, 2 pullers for the price of one.

                                        TIP!
                                        Use in combination with:
                                        - Hand- and footpumpsets
                                      • BETEX TRI SECTION PULLERS

                                      • BETEX TRI-SECTION PULLERS

                                        Complete hydraulic puller set, including Tri-section Plate, for safe and easy dismounting
                                        The thin edge of the bearing splitters ensures to remove the most difficult graspable components
                                        The firm grip behind a bearing's inner and outer rings ensures that the pulling forces are not transmitted through the moving parts, preventing damage to the bearing.

                                        Most parts are forged SCM440 alloy steel, creating a very safe and durable product.
                                      • BETEX HPP PUSH PULLER

                                      • BETEX HPP Push Puller: three-in-one tool

                                        This unique patented self-centring design provides end users with a three-in-one tool to easily and safely fit or remove bearings and sleeves using either their outer or inner edges.
                                        The push puller is specially designed for combined pushing and pulling. This creates one tool that uses even force to enable very easy pushing and pulling.
                                        The pushing jaw fits on the bearing’s inner ring, preventing the transmission of forces and/or heat through the outer ring to the moving parts, minimizing the risk of bearing
                                        damage.
                                      • BETEX HP/HSP/HXP ACCESSORY SETS

                                      • BETEX Bearing splitters

                                        This accessory set consists of:
                                        1 puller block
                                        2 connecting rods (legs)
                                        1 set of bearing splitters for a min./max Ø 25-225 mm
                                        You can use cilinder from HP/HSP/HXP series.
                                      • BETEX TRI SECTION PLATE

                                      • Betex Tri-section Plate
                                        These Tri-section Plates are specially designed to be used in conjunction with the BETEX three-armed pullers.
                                        The unique and patented swivel design creates maximum spread and applies even force at the most efficient point.

                                        The plates grip behind the inner and outer rings of the bearing, preventing the pulling force from being transmitted through the moving parts, minimizing the risk of bearing damage.

                                        Safe
                                        • The Tri-section Plate's unique design ensures the application of force at the most efficient point - the inner ring and outer ring together - and thereby requires less force for removal than required if only pulling on the outer ring.
                                        • The firm grip behind a bearing's inner and outer rings ensures that the pulling forces are not transmitted through the moving parts, preventing damage to the bearing.
                                        • Most parts are forged SCM440 alloy steel, creating a very safe and durable product.
                                    • Betex mobile hydraulic pullers

                                        • BETEX MOBIPULLER 25 & 50 TONS

                                        • BETEX MOBIPULLER - hydraulic mobile puller - 25 & 50 Tons

                                          For dismantling of machine parts such as bearings, couplings, gears and other parts, with relative speed and ease.
                                          The Mobipuller excels through functional and ergonomic operation. It is stable, mobile and adjustable in height.

                                          A maximum tractive force of either 25 or 50 tons can be applied with diameters of upto 430 mm.
                                          To ensure safe and easy operation the electrical models are equiped with remote control.

                                          Applications: ideal for work shops in maintance and production companies.
                                        • BETEX HXPM PULLER 50 TONS - 2 ARM

                                        • For dismounting of all kinds of transmission parts such as bearings, couplings, gears, wheels etc.

                                          Practical
                                          The puller is self-centering, easy to maneuver and adjustable in height. Easy to convert to 2-arm or 3-arm puller. The arms slide inwards or outwards simultaneously.
                                          Flexible
                                          The complete stroke is 330 mm. Four adapters (extensions) are included with a maximum length of 620 mm.
                                          Strong
                                          The harder the force, the tighter the jaws grip. The arms cannot bend or deflect.
                                          Safe
                                          The integral safety release valve prevents overloading and ensures that you will never exceed the maximum power capacity.
                                        • BETEX HXPM PULLER 50 TONS - 2/3 arm

                                        • For dismounting of all kinds of transmission parts such as bearings, couplings, gears, wheels etc.

                                          Practical
                                          The puller is self-centering, easy to maneuver and adjustable in height. Easy to convert to 2-arm or 3-arm puller. The arms slide inwards or outwards simultaneously.
                                          Flexible
                                          The complete stroke is 330 mm. Four adapters (extensions) are included with a maximum length of 620 mm.
                                          Strong
                                          The harder the force, the tighter the jaws grip. The arms cannot bend or deflect.
                                          Safe
                                          The integral safety release valve prevents overloading and ensures that you will never exceed the maximum power capacity.
                                        • BETEX HXPC PULLER 50 TONS WITH CRANE

                                        • For dismounting of all kinds of transmission parts such as bearings, couplings, gears,wheels etc.

                                          Practical
                                          The puller is self-centering, easy to maneuver and adjustable in height. Easy to convert to 2-arm or 3-arm puller. The arms slide inwards or outwards simultaneously.
                                          Fast
                                          The complete stroke is 159 mm. Two adapters (extensions) are included for a total length of 310 mm.
                                          Strong
                                          The harder the force, the tighter the jaws grip. The arms cannot bend or deflect.
                                          Safe
                                          The integral safety release valve prevents overloading and ensures that you will never exceed the maximum power capacity.
                                        • BETEX HXPM PULLER 100 TONS - 2 ARM

                                        • For dismounting of all kinds of transmission parts such as bearings, couplings, gears, wheels etc.

                                          Practical
                                          The puller is self-centering, easy to maneuver and adjustable in height. The arms slide inwards or outwards simultaneously.
                                          Flexible
                                          The complete stroke is 270 mm. 7 adapters (extensions) with a total length of 1125 mm are included.
                                          Strong
                                          The harder the force, the tighter the jaws grip.
                                          The arms cannot bend or deflect.
                                          Safe
                                          The integral safety release valve prevents overloading and ensures that you will never exceed the maximum
                                          power capacity.
                                        • BETEX HXPM PULLER 100 TONS - 2/3 ARM

                                        • For dismounting of all kinds of transmission parts such as bearings, couplings, gears, wheels etc.

                                          Practical
                                          The puller is self-centering, easy to maneuver and adjustable in height. Easy to convert to 2-arm or 3-arm puller. The arms slide inwards or outwards simultaneously.
                                          Flexible
                                          The complete stroke is 270 mm. 7 adapters (extensions) with a total length of 1125 mm are included.
                                          Strong
                                          The harder the force, the tighter the jaws grip.
                                          The arms cannot bend or deflect.
                                          Safe
                                          The integral safety release valve prevents overloading and ensures that you will never exceed the maximum
                                          power capacity.
                                        • BETEX HXPM PULLER 150 TONS - 3 ARM

                                        • For dismounting of all kinds of transmission parts such as bearings, couplings, gears, wheels etc.

                                          Practical
                                          The puller is self-centering, easy to maneuver and adjustable in height. The arms slide inwards or outwards simultaneously.
                                          Flexible
                                          The complete stroke is 325 mm. 7 adapters (extensions) with a total length of 1125 mm are included.
                                          Strong
                                          The harder the force, the tighter the jaws grip.
                                          The arms cannot bend or deflect.
                                          Safe
                                          The integral safety release valve prevents overloading and ensures that you will never exceed the maximum
                                          power capacity.

                                          It is not possible to convert this type to a 2 arm model
                                        • BETEX BPP BEARING PULLER PUSHER

                                        • Specially for rail- and metro workshops. Use the right equipment to remove or install tapered roller bearings. This hydraulic aid will allow you to save valuable time and work safe & efficient. Easy to use roll-around model for both mounting and dismounting.
                                          • Mobile and easy to use by one person
                                          • Pulling capacity (dismantling) adjustable to 100 t max.
                                          • Pushing capacity (mounting) adjustable to 68t max.
                                          • Suitable for locomotives, passenger and freight cars
                                          • For safe, simple and fast mounting and dismounting of tapered roller bearings
                                          • For assembly of TBU, SP and TAROL bearing sets
                                          • Available with manual valve or solenoid valve
                                          • Wide range of accessories available

                                          The accessory set is available in all sizes, metric and inch versions (housing-type locomotives and passenger cars).
                                          An accessory set consists of:
                                          • Pulling shoe
                                          • Pulling shoe insert adapter
                                          • Guide tube & cap screw assembly
                                          • Guide tube adapter
                                          • Installing tube adapter ring
                                        • BETEX BPPS BEARING PULLER PUSHER SIDE SHIFTERS

                                        • Specially for rail- and metro workshops. Use the right equipment to remove or install tapered roller bearings. This hydraulic aid will allow you to save valuable time and work safe & efficient. Easy to use roll-around model for both mounting and dismounting.
                                          • Compact, mobile and easy to use by one person
                                          • Pulling capacity (dismantling) adjustable to 100 t max.
                                          • Pushing capacity (mounting) adjustable to 68t max.
                                          • Suitable for locomotives, passenger and freight cars
                                          • For safe, simple and fast mounting and dismounting of tapered roller bearings
                                          • For assembly of TBU, SP and TAROL bearing sets
                                          • Available with manual valve or solenoid valve
                                          • Wide range of accessories available

                                          The accessory set is available in all sizes, metric and inch versions (housing-type locomotives and passenger cars).
                                          An accessory set consists of:
                                          • Pulling shoe
                                          • Pulling shoe insert adapter
                                          • Guide tube & cap screw assembly
                                          • Guide tube adapter
                                          • Installing tube adapter ring
                                      • Mounting

                                          • Betex portable Induction heaters Standard /TURBO

                                          • Induction heating is a superior, fast and controlled heating method. It is a safe and environmentally friendly alternative for traditional heating methods such as ovens, oil baths or blow torches. These methods cause smoke, fumes or oil waste and are hazardous for personal health and safety.

                                            The heaters are versatile and are used for safe heating of bearings (NU, NJ) gear wheels, bushes, couplings, inner ringes, labyrinth rings, train wheels etc. etc. It is common knowledge that a correct mounting method extends bearing life. Controlled induction heating prevents unnecessary damage, and retains original pre-lubrication. Induction heaters are ideal for sealed bearings (2RS-ZZ).

                                            STANDARD or TURBO?
                                            TURBO models offer low energy consumption combined with high output as an added advantage.
                                            The maximum TURBO effect is achieved with heating in the horizontal position!
                                              • BETEX 22 ELDi Portable 120V/230V-50/60Hz

                                                • Including 5 yokes, 7, 10, 14, 20, 40 mm
                                                • Max. temperature 150°C
                                                • Strong carrying case and shoulder strap
                                                • Digital display
                                                • Incl. magnetic probe
                                                • Automatic demagnetization, better than 2A/cm
                                                • Time or temperature preselection
                                                • Acoustic signal at the end of each heating cycle
                                                • Temperature hold
                                                • Incl. service kit and CE-manual
                                                • 3 years warranty on the electronic unit
                                                • Including packing material

                                                 
                                              • BETEX iDUCTOR

                                              • The BETEX iDuctor is a new professional type of induction hand tool.  All sorts of metal parts, such as drive components, bearing housings, bolts, nuts, pipes and small surfaces can be heated locally. Thanks to the precise heating the surroundings retain a normal temperature. Stuck parts that are heated will expand and loosen.

                                                This is an ideal solution for stuck nuts and bolts, where often a conventional blow torch or grinder are used. Using an open fire entails some form of risk and may cause polution. A grinder can spark and cause damage to the area surrounding the part. All in all, workplaces become much safer, cleaner and faster!

                                                Advantages
                                                • Ergonomic design
                                                • Time savings
                                                • Cost savings
                                                • Convenient
                                                • Can be operated with one hand
                                                • No open fire
                                                • Safe to use
                                                • Versatile
                                                • For hard to reach locations
                                                • Maintenance free
                                              • BETEX 24 XLDi Portable 120V/230V-50/60Hz

                                              • Lightweight induction heater (7kg). Easy to use. Suitable for bearings, gear wheels, couplings with a max. OD of 180mm.

                                                • Weight: 7 kg
                                                • Choice between time or temperature setting
                                                • Max. temperature 150°C
                                                • Time setting 0-45 mm
                                                • Incl. magnetic probe
                                                • Digital display
                                                • Easy to use pushbuttons
                                                • Acoustic signal at the end of each heating cycle
                                                • Temperature hold
                                                • Robust carrying case with shoulderstrap
                                                • Including heat resistant gloves and CE-manual
                                                • 3 years warranty on the electronic unit
                                                • Including packing

                                                 
                                              • BETEX 24 RLDi TURBO Portable 120V/230V 50/60Hz

                                                • Including yoke 7, 10, 14, 20, 40 mm
                                                • Max. temperature 240°C
                                                • Suitable for horizontal and vertical heating
                                                • Digital display
                                                • Incl. magnetic probe
                                                • Automatic demagnetization, better than 2A/cm
                                                • Time or temperature preselection
                                                • Acoustic signal at the end of each heating cycle
                                                • Temperature hold
                                                • Incl. service kit and CE-manual
                                                • 3 years warranty on the electronic unit
                                                • Including packing material
                                            • Betex Induction heaters Standard/TURBO

                                            • Induction bearing heaters
                                              Induction heating is a superior, fast and controlled heating method. It is a safe and environmentally friendly alternative for traditional heating methods such as ovens, oil baths or blow torches. These methods cause smoke, fumes or oil waste and are hazardous for personal health and safety.

                                              Bega induction bearing heaters are versatile and are used for safe heating of bearings (NU, NJ) gear wheels, bushes, couplings, inner ringes, labyrinth rings, train wheels etc. etc. It is common knowledge that a correct mounting method extends bearing life.
                                              Controlled induction heating prevents unnecessary damage, and retains original pre-lubrication. Induction heaters are ideal for sealed bearings (2RS-ZZ).

                                              STANDARD or TURBO?
                                              TURBO models offer low energy consumption combined with high output as an added advantage.
                                              The maximum TURBO effect is achieved with heating in the horizontal position!
                                                • BETEX 22 ESDi -120V/230V 50/60Hz

                                                • With the unique Betex swing arm construction and incl. separate supports for horizontal heating:

                                                  • Including 3 or 5 yokes
                                                  • Max. temperature 240°C
                                                  • Incl. magnetic probe 240°C
                                                  • Suitable for horizontal and vertical heating
                                                  • Digital display
                                                  • Automatic demagnetization, better than 2A/cm2
                                                  • Time or temperature preselection
                                                  • Acoustic signal at the end of each heating cycle
                                                  • Temperature hold
                                                  • Incl. service kit and CE-manual
                                                  • 3 Years warranty on the electronic unit
                                                  • Including packing material
                                                • BETEX 24 RSDi TURBO-120V/230V-50/60Hz

                                                • with the unique Betex swing arm construction, and supports for horizontal heating

                                                  • Including 3 or 5 yokes
                                                  • Max. temperature 240°C
                                                  • Incl. magnetic probe upto 240°C
                                                  • Suitable for horizontal and vertical heating
                                                  • Digital display
                                                  • Automatic demagnetization, better than 2A/cm
                                                  • Time or temperature preselection
                                                  • Acoustic signal at the end of each heating cycle
                                                  • Temperature hold
                                                  • Incl. service kit and CE-manual
                                                  • 3 Years warranty on the electronic unit
                                                  • Including packing material
                                                • BETEX 38 ESD - 230V/400V/450V/500V-50/60Hz

                                                • with the unique Betex swing arm construction

                                                  • Including 2 or 3 yokes
                                                  • Max. temperature 240°C
                                                  • Incl. magnetic probe till 240°C (optional till 350°C)
                                                  • Suitable for horizontal and vertical heating
                                                  • Digital display
                                                  • Automatic demagnetization, to <2A/cm
                                                  • Time or temperature preselection
                                                  • Acoustic signal at the end of each heating cycle
                                                  • Temperature hold
                                                  • Incl. service kit and CE-manual
                                                  • 3 years warranty on the electronic unit
                                                  • Including packing material
                                                • BETEX 40 RSD(m) TURBO - 400V/450V/500V-50/60Hz

                                                • A bench top and easy to use model including swing arm construction for horzontal heating

                                                  • Max. temperature 240°C (optional till 350°C)
                                                  • Incl. magnetic probe 240°C (optional till 350°C)
                                                  • Suitable for horizontal and vertical heating
                                                  • With digital display
                                                  • Microprocessor controle
                                                  • Automatic demagnetization, better than 2A/cm
                                                  • Extra powerful heater for components up to 350 kg!
                                                  • Ergonomic design for safe operation, handy rotating operating panel
                                                  • Time (0-45min) or temperature preselection (50-240°C)
                                                  • Acoustic signal at the end of each heating cycle
                                                  • Temperature hold
                                                  • Includes supports for maximum support
                                                  • Incl. service kit and CE-manual
                                                  • 3 Years warrantyon the electronic unit
                                                  • Excl. packing material / export crate
                                                • BETEX 38 ZFD - 400V/450V/500V 50/60Hz

                                                • Mobile, with the unique swing arm construction and supports for horizontal heating

                                                  • Max. temperature 240°C (optional till 350°C)
                                                  • Incl. magnetic probe 240°C (optional till 350°C)
                                                  • Suitable for horizontal and vertical heating
                                                  • Digital display
                                                  • Microprocessor controle
                                                  • Automatic demagnetization, better than 2A/cm
                                                  • Ergonomic design for safe operation
                                                  • Time (0-99 min) or temperature preselection (50-240°C)
                                                  • Acoustic signal at the end of each heating cycle
                                                  • Temperature hold
                                                  • Incl. service kit and CE-manual
                                                  • 3 Year warranty on the electronic unit
                                                  • Excl. packing material / export crate / yokes
                                                • BETEX 40 RMD TURBO - 400V/450V/500V-50/60Hz

                                                • A easy to use model with unique swing arm construction

                                                  • Max. temperature 240°C (optional till 350°C)
                                                  • Incl. magnetic probe 240°C (optional till 350°C)
                                                  • Suitable for horizontal and vertical heating
                                                  • Digital display
                                                  • Microprocessor controle
                                                  • Automatic demagnetization, better than 2A/cm
                                                  • Compact, robust and ergonomic design for safe operation
                                                  • Ergonomic design for safe operation, handy rotating operating panel
                                                  • Extra powerful heater for components up to 600 kg!
                                                  • With fixed or adjustable supports (optional) for maximum support
                                                  • Time or temperature preselection
                                                  • Acoustic signal at the end of each heating cycle
                                                  • Temperature hold
                                                  • Incl. service kit and CE-manual
                                                  • 3 Years warranty on the electronic unit
                                                  • Excl. packing material / transport crate and yokes
                                                • BETEX SUPER - 400V/450V/4500V - 50/60Hz

                                                • Powerfull heater, for maintenance and production

                                                  • Temperature preselection max. 240°C (optional till 350°C)
                                                  • Incl. magnetic probe upto 240°C (optional till 350°C)
                                                  • Digital display
                                                  • Power control micro-processor controlled
                                                  • Automatic demagnetization, better than 2A/cm
                                                  • Time preselection 0-99 min.
                                                  • Acoustic signal
                                                  • Temperature hold
                                                  • Standard tablelength before poles: 480 mm
                                                  • Incl. service kit and CE-manual
                                                  • 3 Years warranty on the electronic unit
                                                  • Excl. packing material / export crate!
                                                • BETEX SUPER DL-700 - 400V/450V/500V 50/60Hz

                                                • Powerfull heater, for maintenance and production

                                                  • Temperature preselection max. 240°C (optional till 350°C)
                                                  • Incl. magnetic probe upto 240°C (optional till 350°C)
                                                  • Digital display
                                                  • Power control micro-processor controlled
                                                  • Automatic demagnetization, better than 2A/cm
                                                  • Time preselection 0-99 min.
                                                  • Acoustic signal
                                                  • Temperature hold
                                                  • Standard tablelength before poles : 480 mm
                                                  • Incl. service kit and CE-manual
                                                  • 3 Years warranty on the electronic unit
                                                  • Export crate/ packing material included in price
                                                • BETEX SUPER TURBO - 400V/450V/500V 50/60Hz

                                                • Powerfull heater for maintenance and production.

                                                  • Temperature preselection max. 240°C (optional till 350°C)
                                                  • Incl. magnetic probe upto 240°C (optional till 350°C)
                                                  • Digital display
                                                  • TURBO Model. Including sliding yoke construction!
                                                  • Power control micro-processor controlled
                                                  • Automatic demagnetization, better than 2A/cm
                                                  • Time preselection 0-99 min
                                                  • Acoustic signal
                                                  • Temperature hold
                                                  • Easy to use
                                                  • Incl. service kit and CE-manual
                                                  • In accordance with European CE directives and IEC health and safety regulations
                                                  • 3 years warranty on the electronic unit
                                                  • Export crate/ packing material included in price
                                                • BETEX GIANT - 400V/450V/500V 50/60Hz

                                                • Powerfull heater for bearings upto 1500 kg!

                                                  • Temperature preselection max. 240°C (optional till 350°C)
                                                  • Incl. magnetic probe upto 240°C (optional till 350°C)
                                                  • Digital display
                                                  • Power control micro-processor controlled
                                                  • Automatic demagnetization, better than 2A/cm
                                                  • Time preselection 0-99 min.
                                                  • Acoustic signal
                                                  • Temperature hold
                                                  • Max. part width : 450 mm
                                                  • Standard tablelength before poles : 600 mm
                                                  • Incl. service kit and CE-manual
                                                  • 3 Years warranty on the electronic unit
                                                  • Export crate/packing material included in price
                                                • BETEX GIANT DL-700 - 400V/500V 50/60Hz, 100 kVA

                                                • Powerfull heater for bearings upto 3500 kg!

                                                  • Temperature preselection max. 240°C (optional till 350°C)
                                                  • Incl. magnetic probe upto 240°C (optional till 350°C)
                                                  • Digital display
                                                  • Power control micro-processor controlled
                                                  • Softstart, will reduce max. power when heater is switched on.
                                                  • Automatic demagnetization, better than 2A/cm
                                                  • Time preselection 0-99 min.
                                                  • Acoustic signal
                                                  • Temperature hold
                                                  • With adjustable support for max. OD 2040 mm
                                                  • Incl. service kit and CE-manual
                                                  • Excl. power cable (direct connection to the heater)
                                                  • 3 Years warranty on the electronic unit
                                                  • Export crate/ packing material included in price
                                                • BETEX GIANT DL-1000 - 400V/450V/500V 50/60Hz

                                                • Powerfull heater for bearings upto 3500 kg!

                                                  • Temperature preselection max. 240°C (optional till 350°C)
                                                  • Incl. magnetic probe upto 240°C (optional till 350°C)
                                                  • Digital display
                                                  • Power control micro-processor controlled
                                                  • Automatic demagnetization, better than 2A/cm
                                                  • Time preselection 0-99 min.
                                                  • Acoustic signal
                                                  • Temperature hold
                                                  • Max. part width : 1000 mm
                                                  • Standard tablelength before poles : 600 mm
                                                  • Incl. service kit and CE-manual
                                                  • 3 years warranty on the electronic unit
                                                  • Export crate/ packing material included in price
                                              • BETEX MF Quick-Heater

                                              • For mounting & dismounting of powertransmission components in MRO and OEM companies: bearings, labyrinth rings, bearing rings, sleeves, bushes, couplings, gears...

                                                Middle Frequency induction heating is a safe and cost effective heating method, which improves the quality of installation or maintenance. This method is fast, simple and energy efficient, compared to conventional methods.

                                                Middle frequency technology makes it easier and quicker to transfer effective energy in the part. The MF Quick-Heater is compact and mobile so it's easy for you to move around. This system is also clean and operates very quietly. It saves you time as it can be deployed very rapidly (fewer actions) and heats faster than conventional methods. Energy use is much lower thanks to its more efficient electricity consumption.

                                                Choose between two different generators, 22 and 44 kW, available with flexible or fixed inductors. Fixed inductors are placed around a part and flexible inductors (coil principle) may be wrapped around, or placed in, on or under the product. Ideal for varying or very large diameters.
                                                Each heater is customised to your needs and supplied with required size(s) of inductors.

                                                Many applications are possible! Watch our Application examples
                                                • For mounting, dismounting, preheating
                                                • Controlled heating
                                                • Low connection power (32/63 Amp)
                                                • Generators are adjustable from 2.5- 44 kW
                                                • Easy to use, flexible and mobile
                                                • Suitable for production and maintenance applications

                                                NO : Residual magnetism, fire hazard, excessive noise or polluting fumes.
                                                  • BETEX MF-GENERATOR 400V-22kW

                                                  • The smart and eco-friendly way of heating - for dismounting and mounting of all sorts of transmission components

                                                    The MF Quick-Heater allows fast, safe and energy-efficient heating of bearings and other power transmission components.
                                                    It is a sustainable solution for rapid and controlled mounting and dismounting, and prevents damages to components and machine parts.

                                                    The Betex MF Quick-Heater has great advantages:
                                                    • One device for Mounting and Dismounting
                                                    • Adjustable from 10-22kW
                                                    • Reduces heating times and increases productivity
                                                    • Temperature controlled heating: overheating is not possible because demand is constantly monitored and if necessary adjusted. Once the preset temperature has been reached, the device will switch off automatically.
                                                    • Safe, energy efficient operation
                                                    • Environment friendly (no oil, gas)
                                                    • Process optimization through time savings
                                                    • Flexible operation, easy to transport for use on site
                                                    • The inductors can be placed both in and around the component. You can also place a component on a flat surface (table model) or work with flexible inductors. The inductors are available in various diameters, fixed and flexible.
                                                    • With Inductor recognising for fast switching

                                                     
                                                  • BETEX MF-GENERATOR 400V-44kW

                                                  • The smart and eco-friendly way of heating - for dismounting and mounting of all sorts of transmission components

                                                    The MF Quick-Heater allows fast, safe and energy-efficient heating of bearings and other power transmission components.
                                                    It is a sustainable solution for rapid and controlled mounting and dismounting, and prevents damages to components and machine parts.

                                                    The Betex MF Quick-Heater has great advantages:
                                                    • One device for Mounting and Dismounting
                                                    • Adjustable from 10-44kW
                                                    • Reduces heating times and increases productivity
                                                    • Temperature controlled heating: overheating is not possible because demand is constantly monitored and if necessary adjusted. Once the preset temperature has been reached, the device will switch off automatically.
                                                    • Safe, energy efficient operation
                                                    • Environment friendly (no oil, gas)
                                                    • Process optimization through time savings
                                                    • Flexible operation, easy to transport for use on site
                                                    • The inductors can be placed both in and around the component. You can also place a component on a flat surface (table model) or work with flexible inductors. The inductors are available in various diameters, fixed and flexible.
                                                    • With Inductor recognising for fast switching

                                                     
                                                • Impact

                                                • For safe, precise and quick mounting of bearings, bushings, sealing rings, etc., the use of an Impact fitting tool set is an absolute necessity.
                                                  Specially for bearings it is important that during mechanical mounting the bearing is supported on its inner and outer ring in order to avoid unnecessary damage and premature failure.
                                                    • BETEX IMPACT 33

                                                    • FITTING TOOLSET IMPACT 33

                                                      This fitting tool set has been specially designed for quick, accurate and safe mounting of bearings with a bore varying from 10 to 50 mm.
                                                      Impact can also be used to mount bushings, sealing rings etc.

                                                      The set IMPACT 33 consists of :
                                                      • 33 rings
                                                      • 3 impact sleeves (alu)
                                                      • dead-blow hammer
                                                      • carrying case
                                                      • for bore 10 to 50mm and O.D. 26 - 110mm
                                                      • suitable for 375 different bearings
                                                      • weight: 4,8 kg
                                                    • BETEX IMPACT 39

                                                    • FITTING TOOLSET IMPACT 39

                                                      This fitting tool set has been specially designed for quick, accurate and safe mounting of bearings with a bore varying from 10 to 60 mm.
                                                      Impact can also be used to mount bushings, sealing rings etc.

                                                      The set IMPACT 39 consist of:
                                                      • 39 rings in combination with
                                                      • 4 impact sleeves (alu)
                                                      • dead-blow hammer
                                                      • carrying case
                                                      • for bore 10 to 60mm and O.D. 26 - 130mm
                                                      • suitable for 600 different bearings
                                                      • weight: 6,5 kg
                                                  • Checking and Alignment

                                                      • Shims

                                                          • BETEX SHIMS IN CARRYING CASE

                                                          • BETEX SHIMS - SOLID STAINLESS STEEL SHIMS (Material AISI 304, DIN 1.4301)
                                                            Pre-cut shims for fast, simple and precise machine alignment

                                                            The benefits:
                                                            • Saves time and money, you have the right size available for immediate use
                                                            • Safe and efficient, the shims have been smoothed and have no burrs
                                                            • Precision work, precise machine alignment helps you get the best machine performance
                                                            • Stock control is now simpler and easier to verify
                                                            • Many sizes availble for practically every type of machine
                                                             
                                                          • BETEX SHIMS

                                                          • Pre-cut shims for fast, simple and precise machine alignment

                                                            The benefits solid stainless steel (AISI-304) shims :
                                                            • Saves time and money, you have the right size available for immediate use
                                                            • Safe and efficient, the shims have been smoothed and have no burrs
                                                            • Precision work, precise machine alignment helps you get the best machine performance
                                                            • Stock control is now simpler and easier to verify
                                                            • Many sizes availble for practically every type of machine

                                                            The benefits peel-off hard brass shims:
                                                            • The peel-off shims are 1 mm thick and are available in 5 sizes. They consist of 12 peel-off layers (8x0.1 mm and 4x0.05 mm).
                                                            • They always fit! Simply peel-off until the right thickness is obtained
                                                        • Align Equipment

                                                            • ALIGN EQUIPMENT LASER DIRIGO, E420, E540

                                                            • EASY-LASER E420 SHAFT ALIGNMNENT SYSTEM

                                                              Easy-Laser® is used to align pumps and motors for all types of installations in a variety of industries. Correctly set-up and aligned machines are necessary to reduce energy consumption and achieve optimum service life. Easy-Laser® E420 sets a new standard in entry level laser systems for shaft alignment.
                                                              • Easy to learn and to use.
                                                              • Compact measuring units for use on most machine designs.
                                                              • All wireless units (Built-in Bluetooth® technology and integrated rechargeable battery).
                                                              • Large, easy to read 5.7"colour display.
                                                              • Programs with both symbols and text = easy to understand.
                                                              • True PSD technology with unlimited resolution.
                                                              • Dual PSD, dual laser beams and dual inclinometers for superior control and accuracy.
                                                              • 3 year warranty gives assurance.
                                                              • Fast service and support. 48-hours Express service if necessary.
                                                              • Low overall costs during the entire lifecycle of the product, for example calibration, accessories, etc.
                                                            • PULLEY ALIGNMENT LASER D90, D130, D160 PAT

                                                            • BTA EX EASY-LASER D90 pulley alignment laser

                                                              Why the Easy-Laser BTA models?
                                                              • The BTA fits all types of chain and belt drives
                                                              • Not only V-belts, but also flat and toothed belts
                                                              • Shows both angular and parallel errors together
                                                              • Can be used on both horizontally and vertically mounted machines
                                                              • Pulley alignment can now be done by one person
                                                              • The simplicity of the design makes training unnecessary
                                                              • Laser-technology is faster and more precise than conventional alignment methods
                                                              • Now also available in Atex/EX version (D130)

                                                              Specifications:
                                                              Measurements (bxdxh): 145 x 86 x 30 mm
                                                              Material : ABS plastic
                                                              Weight : 270 gram
                                                              Scheave diameters: from diameter 60 mm and bigger
                                                              Measurement distance: max. 10 meter
                                                          • MonitoringTools

                                                              • BETEX TEMPERATURE METER

                                                              • BETEX 1220 DIGITAL LASER THERMOMETER

                                                                Monitor temperatures remotely! A pocket-sized unit!
                                                                Super light and easily fits in your jacket pocket.
                                                                The laser beam allows you to measure remotely the temperature of any required object.
                                                                Digital laser temperature meter for accurately measuring fluids, gasses and all sorts of other substances, till 300° Celsius!
                                                                Temperature range from -50C to + 300C.

                                                                • Readable temperature from -50°C till 300°C
                                                                • Readings possible in Celsius or Fahrenheit.
                                                                • Display illumination on/off
                                                                • Dimensions: 155x50x72 mm
                                                                • Incl. 2 x 1.5V AAA batteries
                                                                • Weight 68 grams
                                                              • BETEX TACHOMETER

                                                              • BETEX 1620 - DIGITALE LASER TACHOMETER

                                                                This digital laser tachometer is very suitable for maintenance and servicing of engines, rotating equipment and machines.
                                                                • 5-digit 10 mm LCD display.
                                                                • Test Range of measurement: 5 to 99.999 rpm
                                                                • Display: 0,1 rpm at 0,5 to 999.99 rpm
                                                                • Display: 1,0 rpm above 1000 rpm
                                                                • Accuracy: +/- 0,5%
                                                                • Measuring distance: 50 to 300 mm
                                                                • Memory: last, maximum and minimum measured value
                                                                • Dimensions: 72 x 190 x 37 mm.
                                                                • Weight: 250 gram.
                                                              • BETEX DECIBEL METERS

                                                              • BETEX 1500 - PROFESSIONAL DIGITAL SOUND LEVEL METER

                                                                With this professional microporssesor operated DB meter you can measure sound level precisely.
                                                                The instrument has an extra large display with digit height of 20 mm

                                                                • Measuremet range: 30 - 100 dB low / 60-130dB high
                                                                • Hold-function and interval measurements
                                                                • Frequency range: 31.5 Hz - 8000 Hz
                                                                • Resolution: 0.1 dB
                                                                • Weight: 270 Gr

                                                                Including:
                                                                • Windcap for microphone
                                                                • Battery
                                                                • Instruction guide
                                                              • BETEX ELS14 ELECTRONIC STETHOSCOPE

                                                              • BETEX ELS14 ELECTRONIC STETHOSCOPE

                                                                For preventive system maintenance with stethoscope.
                                                                Applications include checking the operational status of valves, injectors, electric relays, pumps, lubrication systems, shafts, drivetrains and bearings.

                                                                The stethoscope is supplied complete with headphones, battery and two probes (60 mm and 290 mm)

                                                                The stethoscope is light and has a strong (black) ABS plastic casing.
                                                                It weights just 300 grams with the 290 mm probe.
                                                              • BETEX VIB CHECKER

                                                              • BETEX VIB CHECKER

                                                                Vibration monitoring is a cost-effective predicitive maintenance tool. In most cases, vibration measurement can detect a problem long before damage to the machine is done. The repair of equipment failing while in service is many times costlier than planned repairs made possible through vibration monitoring.

                                                                Use your VibChecker to verify that unhealthy vibration levels have not been introduced after:
                                                                • Replacement of parts
                                                                • Overhauls
                                                                • Repairs
                                                                • Lubrication, etc.
                                                                • Vibration measurement is also advisable whenever a machine is making excessive noise, shaking or generating heat.

                                                                VibChecker immediately tells you the vibration severity level. Readings are automatically evaluated against standards ISO 2372 or ISO 10816. The result is instantly presented with green - yellow - red LEDs.
                                                              • BETEX BEARING CHECKER

                                                              • BEARING CHECKER

                                                                Bearing Checker is unique, being the first portable, pocketsize instrument (weight 185 g, size 158 x 62 x 30 mm) for evaluated shock pulse measurement. Besides shock pulses, Bearing Checker measures machine surface temperature with infrared light, and can also be used as an electronic stethoscope for listening to machine sounds.

                                                                The instrument can be used on most rotating machinery, such as electric motors, fans and pumps, in a diversety of industrial environments.

                                                                Machine breakdowns are frequently caused by bearing damage. Timely failure prediction and detection is key to improving equipment and component reliability and cutting operating costs.
                                                                Unplanned downtime, as well as unnecessary repair work, can be significantly reduced by periodically checking bearing condition.
                                                                 
                                                            • Lubrication

                                                            • perma prevents up to 55 % of roller bearing failures

                                                              • A constant renewal of the lubricating film ensures equipment availability
                                                              • Reliable, clean and precise lubrication around the clock
                                                              • Discharge periods from 1 - 24 months
                                                              • Lubricant volume 60 cm3 up to 7.000 cm3
                                                              • Operating temperature from -20 °C to +60 °C

                                                              perma reduces costs by up to 25 %

                                                              • Continuous production processes and predictable maintenance intervals
                                                              • Continuous, low maintenance, long-term lubrication
                                                              • Permanent supply of lube-points with fresh lubricant
                                                              • Consistently high lubricant quality guarantees
                                                              • high equipment availability
                                                              • Energy cost reduction

                                                              Industries around the world rely on automatic lubrication systems from perma

                                                              perma-tec has been providing innovative and creative lubrication solutions for almost 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.
                                                              perma-tec’s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company’s German headquarters and live up to the "Made in Germany" quality standard.
                                                                • Perma

                                                                    • PERMA CLASSIC

                                                                    • Electrochemical Lubrication Systems

                                                                      Perma CLASSIC is used for single-pointlubrication of roller- and sliding bearings, chains, open gears, guideways, and other system components.
                                                                      Applications can be found in mining, steel- and the automotive industry, as well as in mechanical engineering.


                                                                      Your advantages:
                                                                      • Improved safety and lower costs than manual lubrication
                                                                      • Controlled and consistent lubrication, small amounts in short intervals
                                                                      • Constant supply of fresh lubricant to bearing seals under high contamination conditions
                                                                      • No external power supply necessary 4 different discharge periods possible (120cc in 1, 3, 6, or 12 months)
                                                                      • Reliable supply of lubricant
                                                                      • Lubricant quality in the lubrication point is kept at a high level
                                                                      • Transparent discharge indicator cap shows when the unit is empty
                                                                      • Can be mounted up to 1 m away from the lubrication point with a flexible tube
                                                                      • Simple exchange by hand, no tools necessary
                                                                      • Can be used in Ex-proof areas
                                                                    • PERMA FUTURA

                                                                    • Perma FUTURA is used for single-point lubrication of roller- and sliding bearings, chains, open gears, guide-ways, and other components.
                                                                      This lubrication system is ideal for use in areas that must be kept hygienically clean (e. g. food industry) and in environments which are highly corrosive.


                                                                      Your advantages:
                                                                      • Improved safety and lower costs than manual lubrication
                                                                      • Controlled and consistent lubrication, small amounts in short intervals
                                                                      • Constant supply of fresh lubricant to bearing seals under high contamination conditions
                                                                      • No external power supply necessary
                                                                      • 4 different discharge periods possible (100cc in 1, 3, 6, or 12 months)
                                                                      • Reliable supply of lubricant
                                                                      • Lubricant quality in the lubrication point is kept at a high level
                                                                      • Visible control of remaining lubricant via transparent housing
                                                                      • Can be mounted up to 1 m away from the lubrication point with a flexible tube
                                                                      • Simple exchange by hand, no tools necessary
                                                                      • Can be used in Ex-proof areas
                                                                    • PERMA FLEX

                                                                    • The original system for 24 hours for continuous operation

                                                                      Flexible use – even for challenging lubrication points
                                                                      The automatic lubrication system perma FLEX is available in two convenient sizes (60 cm³ / 125 cm³). It can be used for inside or outside applications at temperatures ranging from -20 °C to +60 °C. Discharge period setting is flexible and can be adjusted from 1 – 12 months using the dial on top of the lubricator. perma FLEX comes fully assembled and ready-to-use. Simply turn the dial to the desired discharge period and the system is activated. The electronically controlled chemical reaction will build up the pressure that is necessary to continually supply the lubrication point with fresh lubricant.

                                                                      Adjustable discharge period 1 – 12 months
                                                                      Can be adjusted and switched off even after activation.
                                                                      Your benefit: Less maintenance costs due to longer equipment service life and increased equipment availability.

                                                                      User friendly all-in-one system
                                                                      perma FLEX comes fully assembled and can be activated quickly and easily without tools.
                                                                      Your benefit: No difficult, time consuming assembly, no special tools required. Just unpack, turn switch and the system is ready.

                                                                      Temperature flexibility from -20 °C up to 60 °C
                                                                      For use in hot and cold areas and applications with changing temperatures.
                                                                      Your benefit: You need only one system for a variety of applications
                                                                    • PERMA NOVA


                                                                      • The fist temperature independent electrochemical lubrication system
                                                                      • Discharge period 12 months
                                                                      • Electrochemical reaction via gas generation cell
                                                                      • Wide temperature range: -20 tot +60°C
                                                                      • LCD display with push button control
                                                                      • Control unit can be reused several times
                                                                      • Dust-tight and protected against water jets
                                                                      • Pressure build-up max. 6 bar
                                                                      • 65 & 130cc lubricant volume
                                                                      • Can be used in areas where exposive atmospheres may occur
                                                                      • Transparent plastic housing, non corrosive
                                                                    • PERMA STAR

                                                                    • PERMA STAR VARIO 2.0
                                                                      perma STAR VARIO operates fully automaticly, temperature independent and very precisely. The system consists of an electromechanical drive unit, a lubrication cartridge (LC) with a lubricant volume of 60, 120 or 250 cm³ and a battery pack. The desired discharge period and LC size can easily be selected with the push button and are immediately visible in the display. The current operating status is indicated on the display and with the all around LED signal lights (red/green), which are visible from a distance.

                                                                      PERMA STAR CONTROL 2.0
                                                                      perma STAR CONTROL is machine / PLC controlled and can easily be integrated into machines with external power supply. The operating status can be transmitted to the PLC. The lubrication system offers two operating modes - TIME and IMPULSE - for more flexibility. In TIME mode, discharges are only carried out when the machine is in operation. In IMPULSE mode, the system discharges a predefined lubricant amount every time external power is applied. The desired mode can be selected via the display. perma STAR CONTROL consists of an electromechanical drive unit with LCD display and an LC unit (available in three different sizes 60 cm³, 120 cm³, 250 cm³). The system discharges exact amounts independent of temperature and up to 6 bar counter pressure.
                                                                    • PERMA PRO

                                                                    • Perma PRO is a battery-operated multi-point lubrication system with a lubricant volume of either 250cc or 500cc. The discharge period can be individually set from 1 day up to 24 months. Perma PRO MP-6 functions as a multi-point lubrication system and can individually supply 2 - 6 lubrication points. No pressure is lost due to direct lubricant distribution. perma PRO can also be used as a single-point lubrication system without the MP-6 distributor.

                                                                      Advantages:
                                                                      • High operating pressure up to 25 bar/ 360 psi
                                                                      • Wide application temperature range of
                                                                      • 20 to +60 °C/-4 to +140 °F
                                                                      • Ergonomically designed compact metal housing
                                                                      • Discharge period can be set from 1 day up to 24 months
                                                                      • Two LC-unit sizes (def.: Lubrication Cartridge): 250cc and 500cc
                                                                      • Battery-operated, stand-alone lubrication system
                                                                      • Two push buttons with display in menu format
                                                                      • Visible piston and LED display
                                                                      • Lubricant in the reservoir is not under pressure
                                                                      • Bayonet catch
                                                                      • Individual lubrication of 2 - 6 lubrication points via direct distributor MP-6
                                                                      • Can be used as a single-point lubrication system
                                                                      • User-friendly operation
                                                                    • PERMA ECOSY

                                                                    • Perma ECOSY is a compact multi-point lubrication system that features a clear construction and multiple functionality. It can supply up to 6 lubrication points with oil. Each outlet’s discharge amount can be set individually and separately from the other outlets. Data about machine operating conditions is collected and transmitted to the lubrication system by a sensor or by the PLC. This ensures lubrication as needed. perma ECOSY is basically maintenance-free; it only requires simple refills of the oil tank.

                                                                      Advantages:
                                                                      • Compact construction
                                                                      • Innovative distributor function
                                                                      • Pre-configured interfaces
                                                                      • User-friendly operation via 4 display buttons
                                                                      • Display with scroll menu
                                                                      • Low temperature shut-off function; indication on display
                                                                      • Reserve shown on display and reservesignal output
                                                                      • Displays sensor function OK
                                                                      • Sturdy metal drive unit
                                                                      • Up to 6 outlets individually adjustable via menu
                                                                      • Display options: language (English/German), temperature (°C / °F)
                                                                      • Selectable working modes: sensor-, time-, or impulse mode
                                                                      • Malfunctions indicated by display and separate malfunction signal output