Navigation : EXPO21XX > FLUID 21XX > H01: Hydraulic Systems > WEBER-HYDRAULIK
WEBER-HYDRAULIK
  • Offer Profile
  • The development of high-quality cylinders, manifolds, valves and aggregates has a long tradition in the corporate group and is therefore our core technological competence. Based on this, the Group offers its customers a leading international, innovative and future-oriented partner that also realises sophisticated application-specific system solutions.

    Throughout the years we have built a strong relationship with renowned companies from the following sectors:
    • Commercial vehicles
    • Agricultural technology
    • Construction machinery
    • Handling vehicles
    • ...
Product Portfolio
  • Products

      • Hydraulic Cylinders

          • Fully Hydraulic Locking Cylinder

          • In the mobile hydraulic sector for vans, construction machines, agricultural machinery and in various support functions.
          • Swing Clamp Cylinders with Three-dimensional Piston Movement

          • In the stationary hydraulic sector for annealing furnaces, hydraulic clamping devices, etc.
          • Cylinders with Integrated Piston Accumulator

          • In the field of mobile hydraulics for mobile hydraulics, agricultural machinery, construction machinery, commercial vehicles, special vehicles, etc.
          • Hydraulic Cylinder for Renewable Energies

          • Cylinders for use in the field of renewable energy
          • Lift and Tilt Cylinder

          • Lift and tilt cylinders are mainly used in mobile hydraulics, agricultural machinery, construction machinery, commercial vehicles, material handling vehicles, special vehicles, etc.
          • Two-stage Telescopic Outrigger Cylinders

          • Cylinders for use in the mobile crane sector
          • Telescopic Cylinders

          • Telescopic cylinders are built mainly for use as tilting cylinders for farm vehicles and 2 or 3-way tilting equipment
            They can also be used as outrigger cylinders in the mobile crane sector
          • And much more...

          • Click the link to see more hydraulic cylinders from Weber Hydraulik.
        • Valves

            • LRF Block System

            • The FLUID TEAM LRF block system that comes in the nominal sizes NS 6 and 10 enables the possibility to establish very individual longitudinal arrangements. There are several modules available with continuous (parallel and serial) load pressure feedback (load sensing).
            • Proportional Pressure Relief Valve EEPDBDS02

            • Direct operated, solenoid actuated
              Max operating pressure: 315 bar
              Max flow rate: 2 l/min
              Connection: stepped bore T-8A
            • Proportional Pressure Relief Valve EEPDBD03

            • Direct operated, solenoid actuated
              Max. operating pressure: 315 bar
              Max. flow rate: 3 l/min
            • Proportional Pressure Relief Valve EPDBD_05

            • Direct operated, solenoid actuated
              Max operating pressure: 315 bar
              Max flow rate: 12 l/min
            • Proportional Pressure Relief Valve EPDBD05 Degressive

            • Direct operated, solenoid actuated
              Max operating pressure: 315 bar
              Max flow rate: 12 l/min
              Degressive
            • Proportional Pressure Relief Valve EPDBDGA05/06

            • Direct operated, solenoid actuated
              Max operating pressure: 45 bar
              Max overload pressure: 315 bar
              Max flow rate: 12 l/min
              Connection: mounting plate, NS 6
            • Proportional Pressure Control Valve EPDRD3-04

            • The valve is particularly suitable as a pilot control for big directional valves and variable delivery pumps. However, due to the very small leakage oil values it is also widely used in low-loss small hydraulic systems (e.g. clamping or braking systems).
            • And much more...

            • Click the link to see more valves from Weber Hydraulik.
          • Mainfolds

              • Manifolds

              • Experienced hydraulic engineers project and build the best possible solutions for your particular applications.
              • Hydraulic Manifolds for Energy Recuperation

              • Hydraulic manifolds for energy recuperation are largely used in the areas of industrial transport vehicles for storage and system technology, excluding the original equipment.
              • Custom Manifold Manufacturing

              • Areas of application: Mobile hydraulics - agricultural machinery, construction machinery, commercial vehicles, industrial transport vehicles, special vehicles etc. mechanical engineering
            • Hydraulic Power Units

                  • GOLIATH - Large Power Units

                  • Standard power units of the GOLIATH series are built in a modular construction and are the preferred choice when supplying external valve control. Due to the use of prefabricated modules, the power units can be implemented inexpensively and quickly. An extensive Module Programme is available for numerous project-specific applications. The power units of the GOLIATH series are thus designed and used to drive systems in almost all areas of mechanical engineering.
              • System Solutions

                  • Electro-Hydraulic Tracking System for Photovoltaics Applications

                  • Electro-Hydraulic Tracking System for Photovoltaics (PV) Applications
                  • Electro-Hydraulic System for WIND Energy

                  • Electro-Hydraulic System for WIND Energy
                  • Tracking System for Concentrated Solar Power Applications

                  • Electro-Hydraulic Tracking System for Concentrated Solar Power (CSP) Applications
                  • Adaptive Cab Suspension

                  • This adaptive suspension system serves as a suspension for cabins of agricultural vehicles, mobile machinery, construction machinery and special vehicles
                  • Hydro-pneumatic Suspension with Adaptive Damping

                  • Hydro-pneumatic suspensions with adaptive damping improve the ride comfort in a variety of applications including, for example, mobile hydraulics, agricultural machinery, construction machinery, commercial vehicles, special vehicles, etc.
                  • Hydro-pneumatic Axle Suspension for Trailers

                  • The presented suspension system comprises two friction-optimised suspension cylinders per axis, hydro-pneumatic accumulator, angle sensors, a load sensing valve and a controller. An axle lifting valve and control panel are also available as an option.
                  • Optical Position Measuring System

                  • Stroke lengths measured by the optical SMS.
                    A camera reads the position of the piston rod from the protected space. When compared to conventional integrated systems, this simple adaptation opens up a wide range of applications.
                  • Linear unit

                  • Electrohydraulic units have a compact construction, thereby saving space, and they only require electrical cables to be laid in order to supply the system with electricity. The intelligent links between various technologies and the modular units, such as hydraulic and electrical systems, are energy-efficient and climate-friendly.
                • Rescue Technology

                      • WEBER RESCUE Systems

                      • Fire brigades and civil protection organisations choose WEBERHYDRAULIK. The rescue of persons trapped or stuck in traffic accidents and natural disasters is one of the most important tasks of the fire brigade and civil protection. Speed, reliability and precision are an absolute requirement for those carrying out the work and equipment. Our hydraulic devices are used to open up reinforcements, profiles and vehicle beams, as well as for lifting or pushing away loads or vehicle parts. Another field of application is the recycling of vehicles, electric appliances and construction debris.
                  • Garage Equipment

                    • Spares & Services

                        • Proportional Technology (PRP) November 2014

                        • We offer seminars in hydraulics for design engineers, technicians and staff in the areas of installation, commissioning and maintenance.
                        • Basics in Hydraulics - Seminar 2014

                        • We offer seminars in hydraulics for design engineers, technicians and staff in the areas of installation, commissioning and maintenance.
                        • Component Sales

                        • Your contact for hydraulic components.

                          We sell hydraulic and pneumatic components of all kinds
                        • Repair Service

                        • Service you can rely on.
                          Our service personnel perform fast, professional repairs to hydraulic power units and hydraulic cylinders (regardless of the manufacturer) as well as on-site hydraulic servicing (oil changes, oil analysis, tube changes)
                      • Applications

                          • Mobile Applications

                            • Agriculture

                              • Industrial Applications

                                • Renewable Energy

                                  • Innovations

                                  • Our Research and Development Activities
                                    Using the latest development tools, our Research and Development team produces tailor-made solutions for our customers. Our engineers and technicians use the latest 3D CAD software, complex kinematic and slow simulations and sophisticated computer-aided static and dynamic structural analyses and installation space evaluations.

                                    We design system layouts using our own calculation programs, developed in-house, underlining our more than six decades of experience in the development of hydraulic components Our test center has the latest equipment to enable us to run experiments designed to ensure customer-specific requirements are met and innovative products are produced.

                                    This professional infrastructure enables our specialists to develop ideal, made-to-measure solutions in a very flexible way on both component and system level.
                                      • WEBER-NICKEL-CHROME (WNC)

                                      • WEBER-HYDRAULIK has developed a new piston rod coating especially for hydraulic cylinders, which are used in particularly harsh environmental conditions. Besides having very convincing functional properties, it is also economically attractive.
                                      • Linear actuators

                                      • Electrification is progressing: WEBER-HYDRAULIK linear actuators deliver efficient "energy on demand" solutions for top performance.

                                        They can be installed in any point in the machine and attachments. The expensive laying of oil lines over partially long distances can be omitted completely. Hydraulics and electronics are connected in a flexible, highly energy-efficient unit.
                                      • Spreader SP 53 BS

                                      • What does BS mean?

                                        The spreader must have a minimum force of 50 kN and a spreading width of at least 800 mm. The new SP 53 BS has the standard designation BS 53/800-20. In other words, it has a minimum force (F1) of 53 kN at the tip at an opening width of 800 mm and a sensational device weight of 20 kg.
                                        It is therefore the only spreader in this weight class that can call itself BS spreader.
                                      • Optical position measuring system

                                      • The optical position measuring system of WEBER-HYDRAULIK is an absolute measuring system without reference position.

                                        It is suitable for all cylinder types and sizes. Integration is possible without changes to the installation space, even when there are many cylinders.

                                        A significant advantage of the system is that there is no need to use hollowed piston rods. Therefore, no negative effects arise on the buckling.
                                      • Scissors RSX 200–107 PLUS

                                      • The right tool for real heroes

                                        The interchangeable PLUS knife inserts, made from a particularly robust special alloy, turn the new generation of cutting equipment into the ultimate team player. They can also cut tempered and hardened vehicle parts easily while remaining unaffected with each use - you can rely on them.
                                      • Signal feedthrough in the outrigger cylinder

                                      • The stability of a crane vehicle is monitored and calculated by means of sensors placed at different positions. From the available sensor information and its accuracy, a safety factor is determined together with the operating range, which cannot be exceeded.
                                        This operating range can be increased in a commercially attractive way, thanks to the rapid development of semiconductor technology, by increasing the number of sensors in the existing crane structure or using more accurate sensors.